Considering packet losses, time-varying delay, and parameter uncertainty in the switched fuzzy system, this paper designs a robust fault detection filter at any switching rate and analyzes the H∞ performance of the s...Considering packet losses, time-varying delay, and parameter uncertainty in the switched fuzzy system, this paper designs a robust fault detection filter at any switching rate and analyzes the H∞ performance of the system. Firstly, the Takagi-Sugeno(T-S) fuzzy model is used to establish a global fuzzy model for the uncertain nonlinear time-delay switched system,and the packet loss process is modeled as a mathematical model satisfying Bernoulli distribution. Secondly, through the average dwell time method and multiple Lyapunov functions, the exponentially stable condition of the nonlinear network switched system is given. Finally, specific parameters of the robust fault detection filter can be obtained by solving linear matrix inequalities(LMIs). The effectiveness of the method is verified by simulation results.展开更多
To investigate a class of nonlinear network control system, a robust fault diagnosis method is presented based on the robust state observer. To access the objective that the designed robust filter is maximally toleran...To investigate a class of nonlinear network control system, a robust fault diagnosis method is presented based on the robust state observer. To access the objective that the designed robust filter is maximally tolerant to disturbances and sensitive to fault, the robustness and stability properties of the fault diagnosis scheme are established rigorously. Using the residual vector, a fault tolerant controller is established in order to guarantee the stability of the closed-loop system, and the controller law can be obtained by solving a set of linear matrix inequalities. Then, some relevant sufficient conditions for the existence of a solution are given by applying Lyapunov stability theory. Finally, a simulation example is performed to show the effectiveness of the proposed approach.展开更多
This paper considers robust fault detection and diagnosis for input uncertain nonlinear systems. It proposes a multi-objective fault detection criterion so that the fault residual is sensitive to the fault but insensi...This paper considers robust fault detection and diagnosis for input uncertain nonlinear systems. It proposes a multi-objective fault detection criterion so that the fault residual is sensitive to the fault but insensitive to the uncertainty as much as possible. Then the paper solves the proposed criterion by maximizing the smallest singular value of the transformation from faults to fault detection residuals while minimizing the largest singular value of the transformation from input uncertainty to the fault detection residuals. This method is applied to an aircraft which has a fault in the left elevator or rudder. The simulation results show the proposed method can detect the control surface failures rapidly and efficiently.展开更多
A parametric approach to robust fault detection in linear systems with unknown disturbances is presented. The residual is generated using full-order state observers (FSO). Based on an analytical solution to a type o...A parametric approach to robust fault detection in linear systems with unknown disturbances is presented. The residual is generated using full-order state observers (FSO). Based on an analytical solution to a type of Sylvester matrix equations, the parameterization of the observer gain matrix is given. In terms of the design degrees of freedom provided by the parametric observer design and a group of introduced parameter vectors, a sufficient and necessary condition for fullorder state observer design with disturbance decoupling is then established. By properly constraining the design parameters according to this proposed condition, the effect of the disturbance on the residual signal is also decoupled, and a simple algorithm is developed. The presented approach offers all the degrees of design freedom. Finally, a numerical example illustrates the effect of the proposed approach.展开更多
In this paper,a combined robust fault detection and isolation scheme is studied for satellite system subject to actuator faults,external disturbances,and parametric uncertainties.The proposed methodology incorporates ...In this paper,a combined robust fault detection and isolation scheme is studied for satellite system subject to actuator faults,external disturbances,and parametric uncertainties.The proposed methodology incorporates a residual generation module,including a bank of filters,into an intelligent residual evaluation module.First,residual filters are designed based on an improved nonlinear differential algebraic approach so that they are not affected by external disturbances.The residual evaluation module is developed based on the suggested series and parallel forms.Further,a new ensemble classification scheme defined as blended learning integrates heterogeneous classifiers to enhance the performance.A wide range of simulations is carried out in a high-fidelity satellite simulator subject to the constant and time-varying actuator faults in the presence of disturbances,manoeuvres,uncertainties,and noises.The obtained results demonstrate the effectiveness of the proposed robust fault detection and isolation method compared to the traditional nonlinear differential algebraic approach.展开更多
Integrity is significant for safety-of-life applications. Receiver autonomous integrity monitoring(RAIM) has been developed to provide integrity service for civil aviation. At first,the conventional RAIM algorithm i...Integrity is significant for safety-of-life applications. Receiver autonomous integrity monitoring(RAIM) has been developed to provide integrity service for civil aviation. At first,the conventional RAIM algorithm is only suitable for single fault detection, single GNSS constellation. However, multiple satellite failure should be considered when more than one satellite navigation system are adopted. To detect and exclude multi-fault, most current algorithms perform an iteration procedure considering all possible fault model which lead to heavy computation burden. An alternative RAIM is presented in this paper based on multiple satellite constellations(for example, GPS and Bei Dou(BDS) etc.) and robust estimation for multi-fault detection and exclusion, which can not only detect multi-failures,but also control the influences of near failure observation. Besides, the RAIM algorithm based on robust estimation is more efficient than the current RAIM algorithm for multiple constellation and multiple faults. Finally, the algorithm is tested by GPS/Bei Dou data.展开更多
An adaptive endpoint detection algorithm based on band energy and adaptive smoothing algorithm is described. This algorithm utilizes the capability of adaptive smoothing algorithm that intensifies the discontinuity be...An adaptive endpoint detection algorithm based on band energy and adaptive smoothing algorithm is described. This algorithm utilizes the capability of adaptive smoothing algorithm that intensifies the discontinuity between local areas. The band energy features are selected because of their usefulness in detecting high energy regions (in the incoming signal) and making the distinction between speech and noise. Heuristic 'edge-focusing' is used to endpoint detection to save the time in iteration.展开更多
The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustnes...The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustness performance, and the H- index is used as the sensitivity performance for obtaining the robust fault detection filter. Then a novel multiple Lyapunov-Krasovskii function is proposed for deriving sufficient existence conditions of the robust fault detection filter based on the average dwell time technique. By introducing slack matrix variable, the coupling between the Lyapunov matrix and system matrix is removed, and the conservatism of results is reduced. Based on the robust fault detection filter, residual is generated and evaluated for detecting faults. In addition, the results of this paper are dependent on time delays,and represented in the form of linear matrix inequalities. Finally,the simulation example verifies the effectiveness of the proposed method.展开更多
This paper is concerned with the robust fault detection filter (RFDF) design for a class of linear time- invariant systems (LTISs) with output state time delays. Although existing results in literatures study the ...This paper is concerned with the robust fault detection filter (RFDF) design for a class of linear time- invariant systems (LTISs) with output state time delays. Although existing results in literatures study the RFDF for time- delay systems, few is concerned with the output state time-delay systems. The basic idea of our study is to eliminate the time delays of system and transform it to a delay-free system (i.e., a linear time-invariant system without time delays) by the bicausal change of coordinates approach. Then, we design the RFDF for the delay-free LTIS, which is equivalent to the original system with time delays. We first introduce a class of systems with output state time delays, whose fault can be detected by using the RFDF design approach for delay-free systems. Then, since the RFDF design problem can be formulated as a standard H-infinity-model matching problem, it is solved by using H-infinity-optimization LMI techniques. In the last, the adaptive threshold of fault detection is chosen and an illustrative design example is used to demonstrate the validity of the design approach.展开更多
The task of robust fault detection and diagnosis of stochastic distribution control (SDC) systems with uncertainties is to use the measured input and the system output PDFs to still obtain possible faults informatio...The task of robust fault detection and diagnosis of stochastic distribution control (SDC) systems with uncertainties is to use the measured input and the system output PDFs to still obtain possible faults information of the system. Using the rational square-root B-spline model to represent the dynamics between the output PDF and the input, in this paper, a robust nonlinear adaptive observer-based fault diagnosis algorithm is presented to diagnose the fault in the dynamic part of such systems with model uncertainties. When certain conditions are satisfied, the weight vector of the rational square-root B-spline model proves to be bounded. Conver- gency analysis is performed for the error dynamic system raised from robust fault detection and fault diagnosis phase. Computer simulations are given to demon- strate the effectiveness of the proposed algorithm.展开更多
基金supported by the National Natural Science Foundation of China (61471323)。
文摘Considering packet losses, time-varying delay, and parameter uncertainty in the switched fuzzy system, this paper designs a robust fault detection filter at any switching rate and analyzes the H∞ performance of the system. Firstly, the Takagi-Sugeno(T-S) fuzzy model is used to establish a global fuzzy model for the uncertain nonlinear time-delay switched system,and the packet loss process is modeled as a mathematical model satisfying Bernoulli distribution. Secondly, through the average dwell time method and multiple Lyapunov functions, the exponentially stable condition of the nonlinear network switched system is given. Finally, specific parameters of the robust fault detection filter can be obtained by solving linear matrix inequalities(LMIs). The effectiveness of the method is verified by simulation results.
基金supported by the National Natural Science Foundation of China(90816023).
文摘To investigate a class of nonlinear network control system, a robust fault diagnosis method is presented based on the robust state observer. To access the objective that the designed robust filter is maximally tolerant to disturbances and sensitive to fault, the robustness and stability properties of the fault diagnosis scheme are established rigorously. Using the residual vector, a fault tolerant controller is established in order to guarantee the stability of the closed-loop system, and the controller law can be obtained by solving a set of linear matrix inequalities. Then, some relevant sufficient conditions for the existence of a solution are given by applying Lyapunov stability theory. Finally, a simulation example is performed to show the effectiveness of the proposed approach.
基金supported by the National Natural Science Foundation of China(60328304)the"111"project of Beihang University (B07009)
文摘This paper considers robust fault detection and diagnosis for input uncertain nonlinear systems. It proposes a multi-objective fault detection criterion so that the fault residual is sensitive to the fault but insensitive to the uncertainty as much as possible. Then the paper solves the proposed criterion by maximizing the smallest singular value of the transformation from faults to fault detection residuals while minimizing the largest singular value of the transformation from input uncertainty to the fault detection residuals. This method is applied to an aircraft which has a fault in the left elevator or rudder. The simulation results show the proposed method can detect the control surface failures rapidly and efficiently.
基金This work was supported by the National Natural Science Foundation of China (No. 60374024)the Program for Changjiang Scholars andInnovative Research Team in University.
文摘A parametric approach to robust fault detection in linear systems with unknown disturbances is presented. The residual is generated using full-order state observers (FSO). Based on an analytical solution to a type of Sylvester matrix equations, the parameterization of the observer gain matrix is given. In terms of the design degrees of freedom provided by the parametric observer design and a group of introduced parameter vectors, a sufficient and necessary condition for fullorder state observer design with disturbance decoupling is then established. By properly constraining the design parameters according to this proposed condition, the effect of the disturbance on the residual signal is also decoupled, and a simple algorithm is developed. The presented approach offers all the degrees of design freedom. Finally, a numerical example illustrates the effect of the proposed approach.
文摘In this paper,a combined robust fault detection and isolation scheme is studied for satellite system subject to actuator faults,external disturbances,and parametric uncertainties.The proposed methodology incorporates a residual generation module,including a bank of filters,into an intelligent residual evaluation module.First,residual filters are designed based on an improved nonlinear differential algebraic approach so that they are not affected by external disturbances.The residual evaluation module is developed based on the suggested series and parallel forms.Further,a new ensemble classification scheme defined as blended learning integrates heterogeneous classifiers to enhance the performance.A wide range of simulations is carried out in a high-fidelity satellite simulator subject to the constant and time-varying actuator faults in the presence of disturbances,manoeuvres,uncertainties,and noises.The obtained results demonstrate the effectiveness of the proposed robust fault detection and isolation method compared to the traditional nonlinear differential algebraic approach.
基金supported by the National 863 project(2013AA122501-1)the National Natural Science Foundation of China(41020144004,41474015,41374019,41374003,41274040)
文摘Integrity is significant for safety-of-life applications. Receiver autonomous integrity monitoring(RAIM) has been developed to provide integrity service for civil aviation. At first,the conventional RAIM algorithm is only suitable for single fault detection, single GNSS constellation. However, multiple satellite failure should be considered when more than one satellite navigation system are adopted. To detect and exclude multi-fault, most current algorithms perform an iteration procedure considering all possible fault model which lead to heavy computation burden. An alternative RAIM is presented in this paper based on multiple satellite constellations(for example, GPS and Bei Dou(BDS) etc.) and robust estimation for multi-fault detection and exclusion, which can not only detect multi-failures,but also control the influences of near failure observation. Besides, the RAIM algorithm based on robust estimation is more efficient than the current RAIM algorithm for multiple constellation and multiple faults. Finally, the algorithm is tested by GPS/Bei Dou data.
文摘An adaptive endpoint detection algorithm based on band energy and adaptive smoothing algorithm is described. This algorithm utilizes the capability of adaptive smoothing algorithm that intensifies the discontinuity between local areas. The band energy features are selected because of their usefulness in detecting high energy regions (in the incoming signal) and making the distinction between speech and noise. Heuristic 'edge-focusing' is used to endpoint detection to save the time in iteration.
基金supported by the National Natural Science Foundation of China(6127316261403104)
文摘The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustness performance, and the H- index is used as the sensitivity performance for obtaining the robust fault detection filter. Then a novel multiple Lyapunov-Krasovskii function is proposed for deriving sufficient existence conditions of the robust fault detection filter based on the average dwell time technique. By introducing slack matrix variable, the coupling between the Lyapunov matrix and system matrix is removed, and the conservatism of results is reduced. Based on the robust fault detection filter, residual is generated and evaluated for detecting faults. In addition, the results of this paper are dependent on time delays,and represented in the form of linear matrix inequalities. Finally,the simulation example verifies the effectiveness of the proposed method.
基金supported by the National Natural Science Foundation of China (Nos. 50977008, 61034005)the National High Technology Research and Development Program of China (No. 2012AA040104)National Basic Research Program of China (No. 2009CB320601)
文摘This paper is concerned with the robust fault detection filter (RFDF) design for a class of linear time- invariant systems (LTISs) with output state time delays. Although existing results in literatures study the RFDF for time- delay systems, few is concerned with the output state time-delay systems. The basic idea of our study is to eliminate the time delays of system and transform it to a delay-free system (i.e., a linear time-invariant system without time delays) by the bicausal change of coordinates approach. Then, we design the RFDF for the delay-free LTIS, which is equivalent to the original system with time delays. We first introduce a class of systems with output state time delays, whose fault can be detected by using the RFDF design approach for delay-free systems. Then, since the RFDF design problem can be formulated as a standard H-infinity-model matching problem, it is solved by using H-infinity-optimization LMI techniques. In the last, the adaptive threshold of fault detection is chosen and an illustrative design example is used to demonstrate the validity of the design approach.
基金Supported by the National Natural Science Foundation of China (Grant No. 60534010)the Outstanding Overseas Chinese Scholars Fund of CAS (Grant No. 2004-1-4)
文摘The task of robust fault detection and diagnosis of stochastic distribution control (SDC) systems with uncertainties is to use the measured input and the system output PDFs to still obtain possible faults information of the system. Using the rational square-root B-spline model to represent the dynamics between the output PDF and the input, in this paper, a robust nonlinear adaptive observer-based fault diagnosis algorithm is presented to diagnose the fault in the dynamic part of such systems with model uncertainties. When certain conditions are satisfied, the weight vector of the rational square-root B-spline model proves to be bounded. Conver- gency analysis is performed for the error dynamic system raised from robust fault detection and fault diagnosis phase. Computer simulations are given to demon- strate the effectiveness of the proposed algorithm.