Rock physical characteristics of deep dolomite under complex geological conditions:A case study of 4th Member of Sinian Dengying Formation in the Sichuan Basin,China

The deep-ultra deep carbonate reservoir in China,commonly subjected to modification of multi-stage diagenesis,has extremely high heterogeneity.Conventional rock physics analysis cannot accurately identify the elastic responses of reservoir.Here,the rock physics properties of the dolomite from the 4th Member of the Sinian Dengying Formation are experimentally measured,and the change law of rock physics characteristics is investigated within the framework of the diagenetic processes by the analysis of the elastic and petrologic characteristics,pore structure,and sedimentary environments.The results show that the differentiated diagenesis results in different pore structure characteristics and microtexture characteristics of the rock.The microbial dolomite of the algal mound-grain beach facies is subjected to the contemporaneous microbial dolomitization and seepage-reflux dolomitization,penecontemporaneous selective dissolution,burial dolomitization,and hydrothermal dolomitization.The resultant crystalline dolomite is found with one main type of the dolomite crystal contact boundaries,and the dissolution pore is extensive development.The siliceous,muddy,and limy dolomite of the interbeach sea environment mainly experiences the weak capillary concentration dolomitization,intensive mechanical compaction-induced densification,and burial dolomitization.Such crystalline dolomite is observed with four types of contact boundaries,namely the dolomite contact,clay contact,quartz contact,and calcite contact boundaries,and porosity mostly attributed to residual primary inter-granular or crystalline pores.The samples with the same crystal boundary condition have consistent correlations between the compressional-and shear-wave velocities,and between the compressional-wave velocity and the velocity ratio.Additionally,the variation of the acoustic velocity with effective pressure and the intensity of pore-scale fluid-related dispersion are controlled by the differentiation of pore structure types of the samples.The varied effects of soft pores like micro-cracks on the compressional-and shearwave velocity causes considerable changes in the relationships between the compressional-and shearwave velocities,compressional-wave velocity and velocity ratio,and porosity and acoustic velocity.This research is an attempt to demonstrate a novel method for investigating the rock physics variation of rock during the geological process,and the obtained findings can provide the rock physics basis for seismic prediction of the characteristics of deep carbonate reservoirs.

Effects of micrite microtextures on the elastic and petrophysical properties of carbonate reservoirs

Apparent differences in sedimentation and diagenesis exist between carbonate reservoirs in different areas and affect their petrophysical and elastic properties.To elucidate the relevant mechanism,we study and analyze the characteristics of rock microstructure and elastic properties of carbonates and their variation regularity using 89 carbonate samples from the different areas The results show that the overall variation regularities of the physical and elastic properties of the carbonate rocks are controlled by the microtextures of the microcrystalline calcite,whereas the traditional classification of rock-and pore-structures is no longer applicable.The micrite microtextures can be divided,with respect to their morphological features,into porous micrite,compact micrite,and tight micrite.As the micrites evolves from the first to the last type,crystal boundaries are observed with increasingly close coalescence,the micritic intercrystalline porosity and pore-throat radius gradually decrease;meanwhile,the rigidity of the calcite microcrystalline particle boundary and elastic homogeneity are enhanced.As a result,the seismic elastic characteristics,such as permeability and velocity of samples,show a general trend of decreasing with the increase of porosity.For low-porosity rock samples(φ<5%)dominated by tight micrite,the micritic pores have limited contributions to porosity and permeability and the micrite elastic properties are similar to those of the rock matrix.In such cases,the macroscopic physical and elastic properties are more susceptible to the formation of cracks and dissolution pores,but these features are controlled by the pore structure.The pore aspect ratio can be used as a good indication of pore types.The bulk modulus aspect ratio for dissolution pores is greater than 0.2,whereas that of the intergranular pores ranges from 0.1 to 0.2.The porous and compact micrites are observed to have a bulk modulus aspect ratio less than 0.1,whereas the ratio of the tight micrite approaches 0.2。

Petrophysical properties of deep Longmaxi Formation shales in the southern Sichuan Basin, SW China

Deep shale layer in the Lower Silurian Longmaxi Formation,southern Sichuan Basin is the major replacement target of shale gas exploration in China.However,the prediction of"sweet-spots"in deep shale gas reservoirs lacks physical basis due to the short of systematic experimental research on the physical properties of the deep shale.Based on petrological,acoustic and hardness measurements,variation law and control factors of dynamic and static elastic properties of the deep shale samples are investigated.The study results show that the deep shale samples are similar to the middle-shallow shale in terms of mineral composition and pore type.Geochemical characteristics of organic-rich shale samples(TOC>2%)indicate that these shale samples have a framework of microcrystalline quartz grains;the intergranular pores in these shale samples are between rigid quartz grains and have mechanical property of hard pore.The lean-organic shale samples(TOC<2%),with quartz primarily coming from terrigenous debris,feature plastic clay mineral particles as the support frame in rock texture.Intergranular pores in these samples are between clay particles,and show features of soft pores in mechanical property.The difference in microtexture of the deep shale samples results in an asymmetrical inverted V-type change in velocity with quartz content,and the organic-rich shale samples have a smaller variation rate in velocity-porosity and velocity-organic matter content.Also due to the difference in microtexture,the organic-rich shale and organic-lean shale can be clearly discriminated in the cross plots of P-wave impedance versus Poisson’s ratio as well as elasticity modulus versus Poisson’s ratio.The shale samples with quartz mainly coming from biogenic silica show higher hardness and brittleness,while the shale samples with quartz from terrigenous debris have hardness and brittleness less affected by quartz content.The study results can provide a basis for well-logging interpretation and"sweet spot"prediction of Longmaxi Formation shale gas reservoirs.

Monitoring of steam chamber in steam-assisted gravity drainage based on the temperature sensitivity of oil sand

Thermosensitivity experiments and simulation calculations were conducted on typical oil sand core samples from Kinosis,Canada to predict the steam chamber development with time-lapse seismic data during the steam-assisted gravity drain-age(SAGD).Using an ultrasonic base made of polyether ether ketone resin instead of titanium alloy can improve the signal en-ergy and signal-to-noise ratio and get clear first arrival;with the rise of temperature,heavy oil changes from glass state(at-34.4℃),to quasi-solid state,and to liquid state(at 49.0℃)gradually;the quasi-solid heavy oil has significant frequency dis-persion.For the sand sample with high oil saturation,its elastic property depends mainly on the nature of the heavy oil,while for the sand sample with low oil saturation,the elastic property depends on the stiffness of the rock matrix.The elastic property of the oil sand is sensitive to temperature noticeably,when the temperature increases from 10℃ to 175℃,the oil sand samples decrease in compressional and shear wave velocities significantly.Based on the experimental data,the quantita-tive relationship between the compressional wave impedance of the oil sand and temperature was worked out,and the tem-perature variation of the steam chamber in the study area was predicted by time-lapse seismic inversion.

Cohesive Strength and Seismogenic Stress Pattern along the Active Basement Faults of the Precordillera-Sierras Pampeanas Ranges,Western Argentina:An Experimental Analysis by Means of Numerical Model

A two-dimensional finite element method （FEM） model that incorporates faults, elastic rock physical properties, topographical load due to gravity and far-field plate velocity boundary conditions was used to recognize the seismogenic stress state along the fold-and-thrust belt of the Precordillera-Sierras Pampeanas ranges of western Argentina. A plane strain model with nine experiments was presented here to examine the fault strength with two major rock phyical properties： cohesion and angle of internal friction. Mohr-Coulomb failure criterion with bulk rock properties were applied to analyse faults. The stress field at any point of the model was assumed to be comprised of gravitational and tectonic components. The analysis was focused to recognize the seismogenic shear strain concentrated in the internal-cristaline domain of the orogene shown by the modeling. Modeling results are presented in terms of four parameters, i. e., （i） distributions, orientations, and magnitudes of principal stresses （σ1 and σ3）, （ii） displacement vector1 （iii） strain distribution, and （iv） maximum shear stress （τmax） contour line within the model. The simulation results show that the compressive stress is distributed in and around the fault systems. The overall orientation of of σ1 is in horizontal directions, although reorientations do occur within some stress weaker parts, especially subsequent to the faults. A large-scale shear stress is accumulating along the active faults of Tapias-Villicum Fault （TVF）, Salinas-Berros Fault （SBF）, Ampacama-Niquizanga Fault （ANF） and Las Charas Fault （CF）, which could act as local stress and strain modulators to localize the earthquakesoccurrence.