In order to predict the plate curvature during snake rolling, FE model was constructed based on plane strain assumption. The accuracy of the FE model was verified by the comparison between the plate curvature conducte...In order to predict the plate curvature during snake rolling, FE model was constructed based on plane strain assumption. The accuracy of the FE model was verified by the comparison between the plate curvature conducted by FE model and experiment respectively. By using FE model, the effect of offset distance, speed ratio, reduction, roll radius and initial plate thickness on the plate curvature during snake rolling was investigated. The experimental results show that, a proper offsetting distance can efficiently decrease plate curvature, however an excessive offsetting distance will increase plate curvature. A larger speed ratio, reduction will cause a large plate curvature, however a larger roll radius has effect to reduce plate curvature. Plate which undergoes a larger reduction and plate with a larger initial thickness always need a larger offset distance to keep the plate the minimum plate curvature, but for a larger roll radius a smaller offset distance is needed.展开更多
In order to study the bending behavior of aluminum alloy 7050 thick plate during snake hot rolling, several coupled thermo-mechanical finite element(FE) models were established. Effects of different initial thicknesse...In order to study the bending behavior of aluminum alloy 7050 thick plate during snake hot rolling, several coupled thermo-mechanical finite element(FE) models were established. Effects of different initial thicknesses, pass reductions, speed ratios and offset distances on the bending value of the plate were analyzed. ‘Quasi smooth plate' and optimum offset distance were defined and quasi smooth plate could be acquired by adjusting offset distance, and then bending control equation was fitted. The results show that bending value of the plate as well as the extent of the increase grows with the increase of pass reduction and decrease of initial thickness; the bending value firstly increases and then keeps steady with the ascending speed ratio; the bending value can be reduced by enlarging the offset distance. The optimum offset distance varies for different rolling parameters and it is augmented with the increase of pass reduction and speed ratio and the decrease of initial thickness. A proper offset distance for different rolling parameters can be calculated by the bending control equation and this equation can be a guidance to acquire a quasi smooth plate. The FEM results agree well with experimental results.展开更多
According to revised Cailikefu’s rolling shear force formula,motion path equation of spatial seven-bar path is built,and mechanical model,with such new structural features as negative offset,is thus successfully esta...According to revised Cailikefu’s rolling shear force formula,motion path equation of spatial seven-bar path is built,and mechanical model,with such new structural features as negative offset,is thus successfully established for 2 800 mm heavy shear of some Iron&Steel Company. Shear force and bar force of steel plate,before and after adoption of negative offset structure,are analyzed,as well as horizontal force component of mechanism that influences pure rolling shear and back-wall push force that keeps blade clearance. The discovery is that back-wall push force could be kept large enough at rolling start-up (i.e. the time that the maximum rolling shear produces),meanwhile,back-wall push force is the most approximate to side forces with adoption of 60 mm-100 mm offset. Theoretical results and on-site shear quality both indicate that new structural features such as negative offset plays an important role in ensuring pure rolling shear and keeping blade clearance constant,which provide an effective means to improve quality of steel plate.展开更多
According to the revised Cailikefu＇s rolling shear force formula, motion path equation of spatial seven-bar path was built, and a mechanical model, with the new structural feature of negative offset, was thus success...According to the revised Cailikefu＇s rolling shear force formula, motion path equation of spatial seven-bar path was built, and a mechanical model, with the new structural feature of negative offset, was thus successfully established for 2 800 mm heavy shear of some iron and steel company. Shear and bar forces of steel plate, before and after the adoption of negative offset structure, were analyzed, as well as horizontal force component of mechanism that influences pure rolling shear and back-wall push force that keeps blade clearance. It was found that the back-wall push force keeps large even at the time that the maximum rolling shear was obtained; meanwhile, back-wall push force is the most approximate to side forces when 60--100 mm of offset was adopted. Both theoretical results and onsite shear quality show that the negative offset plays an important role in ensuring the stability of pure rolling shear and keeping blade clearance constant.展开更多
基金Funded by the Chinese "973" Project (No.2010CB735811)
文摘In order to predict the plate curvature during snake rolling, FE model was constructed based on plane strain assumption. The accuracy of the FE model was verified by the comparison between the plate curvature conducted by FE model and experiment respectively. By using FE model, the effect of offset distance, speed ratio, reduction, roll radius and initial plate thickness on the plate curvature during snake rolling was investigated. The experimental results show that, a proper offsetting distance can efficiently decrease plate curvature, however an excessive offsetting distance will increase plate curvature. A larger speed ratio, reduction will cause a large plate curvature, however a larger roll radius has effect to reduce plate curvature. Plate which undergoes a larger reduction and plate with a larger initial thickness always need a larger offset distance to keep the plate the minimum plate curvature, but for a larger roll radius a smaller offset distance is needed.
基金Projects(2012CB619505,2010CB731703)supported by the National Basic Research Program of ChinaProject(CX2013B065)supported by Hunan Provincial Innovation Foundation for Postgraduate,China+1 种基金Project(51405520)supported by the National Natural Science Foundation of ChinaProject(zzyjkt2013-06B)supported by the State Key Laboratory of High Performance Complex Manufacturing(Central South University),China
文摘In order to study the bending behavior of aluminum alloy 7050 thick plate during snake hot rolling, several coupled thermo-mechanical finite element(FE) models were established. Effects of different initial thicknesses, pass reductions, speed ratios and offset distances on the bending value of the plate were analyzed. ‘Quasi smooth plate' and optimum offset distance were defined and quasi smooth plate could be acquired by adjusting offset distance, and then bending control equation was fitted. The results show that bending value of the plate as well as the extent of the increase grows with the increase of pass reduction and decrease of initial thickness; the bending value firstly increases and then keeps steady with the ascending speed ratio; the bending value can be reduced by enlarging the offset distance. The optimum offset distance varies for different rolling parameters and it is augmented with the increase of pass reduction and speed ratio and the decrease of initial thickness. A proper offset distance for different rolling parameters can be calculated by the bending control equation and this equation can be a guidance to acquire a quasi smooth plate. The FEM results agree well with experimental results.
基金Supported by the National tenth-five Key Technologies R&D Programme (ZZ01-13A-03-03-04) .
文摘According to revised Cailikefu’s rolling shear force formula,motion path equation of spatial seven-bar path is built,and mechanical model,with such new structural features as negative offset,is thus successfully established for 2 800 mm heavy shear of some Iron&Steel Company. Shear force and bar force of steel plate,before and after adoption of negative offset structure,are analyzed,as well as horizontal force component of mechanism that influences pure rolling shear and back-wall push force that keeps blade clearance. The discovery is that back-wall push force could be kept large enough at rolling start-up (i.e. the time that the maximum rolling shear produces),meanwhile,back-wall push force is the most approximate to side forces with adoption of 60 mm-100 mm offset. Theoretical results and on-site shear quality both indicate that new structural features such as negative offset plays an important role in ensuring pure rolling shear and keeping blade clearance constant,which provide an effective means to improve quality of steel plate.
基金Item Sponsored by National Natural Science Foundation of China (50575155)National Tenth-Five Key Technologies Research and Development Program(ZZ01-13A-03-03-04)Shanxi Provincial Key Technologies Research and Development Program of China (2006031174)
文摘According to the revised Cailikefu＇s rolling shear force formula, motion path equation of spatial seven-bar path was built, and a mechanical model, with the new structural feature of negative offset, was thus successfully established for 2 800 mm heavy shear of some iron and steel company. Shear and bar forces of steel plate, before and after the adoption of negative offset structure, were analyzed, as well as horizontal force component of mechanism that influences pure rolling shear and back-wall push force that keeps blade clearance. It was found that the back-wall push force keeps large even at the time that the maximum rolling shear was obtained; meanwhile, back-wall push force is the most approximate to side forces when 60--100 mm of offset was adopted. Both theoretical results and onsite shear quality show that the negative offset plays an important role in ensuring the stability of pure rolling shear and keeping blade clearance constant.
