Numerical simulation of roll temperature field and analysis of influence factor during the single-stand reversing cold rolling process

Accurate calculation results of roll temperature are the key factors in rolling cooling and lubricating technology during the single-stand reversing cold rolling process. By combining the high-strength steel rolling experiments ,the numerical simulation of roll temperature, and the influence factors in reversing cold rolling were studied. The research results correspond with those of rolling experiments and show that the research method could provide effective instruction for roll cooling and emulsion flow rate control during the on-site rolling process.

Analysis of Temperature Field and Thermal Crown of Roll During Hot Rolling by Simplified FEM

Thermal crown of roll is an important factor, which affects strip profile. It is necessary to analyze the temperature field and thermal crown of roll for hot strip mill. A new simplified finite element method （FEM） was used to analyze the temperature field and thermal crown of roll, and corresponding models were built according to the practical boundary conditions. Transient roll temperature field and thermal crown were simulated by ANSYS FEM software with considering transient thermal contact and complex boundary condition. Temperature and thermal crown variations on roll surface nodes were obtained. The thermal crown results of roll obtained by FEM simulation were in good agreement with the measured data, indicating that simplified FEM models and results were correct.

Thermal Crown Model and Shifting Effect Analysis of Work Roll in Hot Strip Mills

Considering the effect of work roll shifting on roll temperature field,a finite difference method of PR format for roll temperature field was presented,which can meet the requirements of accuracy and speed of online calculation.The step-by-step accumulation method was used to simulate the roll temperature field and thermal crown,and the evolution of roll thermal crown in a rolling campaign was studied.And then,the effects of strip width,rolling rhythm and work roll shifting on roll thermal crown were analyzed.It is found that work roll shifting can disperse the thermal expansion of the roll body especially the edge to make roll thermal contour uniform.The effect of work roll shifting on roll thermal crown is mainly concentrated in regions around twice of roll shifting stroke,and the change range of roll thermal crown is±30μm or so in the same roll body location.