A radiative heat transfer mathematical model for a one-dimensional long furnace was set up in a through-type roller-hearth furnace （TTRHF） in compact strip production （CSP）. To accurately predict the heat exchange...A radiative heat transfer mathematical model for a one-dimensional long furnace was set up in a through-type roller-hearth furnace （TTRHF） in compact strip production （CSP）. To accurately predict the heat exchange in the furnace, modeling of the complex gas energy-balance equation in volume zones was considered, and the heat transfer model of heating slabs and wall lines was coupled with the radiative heat transfer model to identify the surface zonal temperature. With numerical simulation, the temperature fields of gas, slabs, and wall lines in the furnace under one typical working condition were carefully accounted and analyzed. The fundamental theory for analyzing the thermal process in TI＇RI-IF was provided.展开更多
In this study,innovative ellipsoid pellet with craters on its surface was designed,and the direct reduction process was compared with ellipsoid(without craters)and sphere pellets.In addition,furnace temperature and un...In this study,innovative ellipsoid pellet with craters on its surface was designed,and the direct reduction process was compared with ellipsoid(without craters)and sphere pellets.In addition,furnace temperature and uneven heat flux density effects on the pellet direct reduction process were also studied.The results show that ellipsoid pellet is better than that of spherical pellet on metallization ratio.However,under the condition of non-uniform heat flow,the ellipsoid pellet final metallization rate and zinc removal rate were lower.Although the heat transfer effect of ellipsoid pellet with craters was not improved significantly,the metallization rate and zinc removal rate were found improved,which will have a cumulative effect on the pellets direct reduction process in rotary hearth furnace.Under varying furnace temperature conditions,the pellet temperature was higher than that of the constant furnace temperature.After 1200 s,pellet Fe concentration increased to 123.6%,metallization rate and zinc removal rate increased to 113.7%and 102.2%,respectively.These results can provide references for the carbon-containing pellet design used in rotary hearth furnace.展开更多
Temperature uniformity of steel coils in High Performance Hydrogen bell-type annealing furnace has a significant effect on their quality and production. The hot rolled coil can be considered as a periodically laminate...Temperature uniformity of steel coils in High Performance Hydrogen bell-type annealing furnace has a significant effect on their quality and production. The hot rolled coil can be considered as a periodically laminated material composed of steel layers and interface layers in radial direction. A new formula for the radial effective thermal conductivity has been proposed, which is based on surface characteristic, strip thickness and compressive stress of the rolled coil. Furthermore, it has been used to develop a heat transfer mathematical model for steel coils in the HPH furnace. The calculated annealing curves using this mathematical model are in good agreement with the experimental data.展开更多
文摘A radiative heat transfer mathematical model for a one-dimensional long furnace was set up in a through-type roller-hearth furnace （TTRHF） in compact strip production （CSP）. To accurately predict the heat exchange in the furnace, modeling of the complex gas energy-balance equation in volume zones was considered, and the heat transfer model of heating slabs and wall lines was coupled with the radiative heat transfer model to identify the surface zonal temperature. With numerical simulation, the temperature fields of gas, slabs, and wall lines in the furnace under one typical working condition were carefully accounted and analyzed. The fundamental theory for analyzing the thermal process in TI＇RI-IF was provided.
基金Project(cstc 2018 jszx-cyzdx 0100)supported by the Chongqing Technology Innovation and Application Demonstration Project,China。
文摘In this study,innovative ellipsoid pellet with craters on its surface was designed,and the direct reduction process was compared with ellipsoid(without craters)and sphere pellets.In addition,furnace temperature and uneven heat flux density effects on the pellet direct reduction process were also studied.The results show that ellipsoid pellet is better than that of spherical pellet on metallization ratio.However,under the condition of non-uniform heat flow,the ellipsoid pellet final metallization rate and zinc removal rate were lower.Although the heat transfer effect of ellipsoid pellet with craters was not improved significantly,the metallization rate and zinc removal rate were found improved,which will have a cumulative effect on the pellets direct reduction process in rotary hearth furnace.Under varying furnace temperature conditions,the pellet temperature was higher than that of the constant furnace temperature.After 1200 s,pellet Fe concentration increased to 123.6%,metallization rate and zinc removal rate increased to 113.7%and 102.2%,respectively.These results can provide references for the carbon-containing pellet design used in rotary hearth furnace.
基金This work has been supported by Cross-Century Talents Projects of Educational Ministry of China.
文摘Temperature uniformity of steel coils in High Performance Hydrogen bell-type annealing furnace has a significant effect on their quality and production. The hot rolled coil can be considered as a periodically laminated material composed of steel layers and interface layers in radial direction. A new formula for the radial effective thermal conductivity has been proposed, which is based on surface characteristic, strip thickness and compressive stress of the rolled coil. Furthermore, it has been used to develop a heat transfer mathematical model for steel coils in the HPH furnace. The calculated annealing curves using this mathematical model are in good agreement with the experimental data.
