A radiative heat transfer mathematical model for a one-dimensional long furnace was set up in a through-type roller-hearth furnace （TTRHF） in compact strip production （CSP）. To accurately predict the heat exchange...A radiative heat transfer mathematical model for a one-dimensional long furnace was set up in a through-type roller-hearth furnace （TTRHF） in compact strip production （CSP）. To accurately predict the heat exchange in the furnace, modeling of the complex gas energy-balance equation in volume zones was considered, and the heat transfer model of heating slabs and wall lines was coupled with the radiative heat transfer model to identify the surface zonal temperature. With numerical simulation, the temperature fields of gas, slabs, and wall lines in the furnace under one typical working condition were carefully accounted and analyzed. The fundamental theory for analyzing the thermal process in TI＇RI-IF was provided.展开更多
The mill roller bearing is made up of an internal ring, middlerolls and an external ring, the analysis of which is a multi-bodiescontact problem. In this paper, based on the three-dimensionalelastic contact BEM withou...The mill roller bearing is made up of an internal ring, middlerolls and an external ring, the analysis of which is a multi-bodiescontact problem. In this paper, based on the three-dimensionalelastic contact BEM without friction, and using the structuralcharacteristics of roller bearings, middle rolls are de- scribed byelastic plate units of different shapes, which is placed on theinternal ring.展开更多
A mixed method which combines the recent developed finite analytical method and the boundary fitting coordinate transformation method was used first to calculate the temperature field and thermal stress field of the c...A mixed method which combines the recent developed finite analytical method and the boundary fitting coordinate transformation method was used first to calculate the temperature field and thermal stress field of the cold roller in this paper. The following results are obtained by the calculation: thermal stresses σr=0, σθ=σz are maximum tension stress on the inner surface of the cold roller and σr=0, |σθ|=|σz| are maximum compression stress on the outer surface of the cold roller in the steady and unsteady case. Effectiveness and validity of the mixed method are checked with steady coil roller problems having theoretical solutions. The results show that good agreement is achived between the calculated value and theoretical solution,and the mixed method used in the paper is very workable. The mixed method is also useful in solving the steady and unsteady thermal stress field proplems of the hot -rolled for the reversing rolling mill and the continous rolling mill.展开更多
The effect of roller shapes on strip buckling in a continuous annealing furnace was focused on. The tensile stress distribution, the transverse compressive stress, and the critical buckling stress of the strip were st...The effect of roller shapes on strip buckling in a continuous annealing furnace was focused on. The tensile stress distribution, the transverse compressive stress, and the critical buckling stress of the strip were studied by the finite element method （FEM） when the flat roller, crown roller, single taper roller, and double taper roller were used, respectively. Simulation results show that strip buckling is most likely to occur with the crown roller, then the double taper roller, and finally the single taper roller. Also, strip buckling can not occur when the flat roller is used. Considering strip snaking, the single taper roller and double taper roller are suggested in the continuous annealing fur-nace. The double taper roller with a better strip snaking-prevention ability should be applied in the sections with high strip temperature, and the single taper roller with a better buckling-prevention ability should be used in the sections with low strip temperature.展开更多
The stoichiometric alloy MlB5.0 and the hypo-stoichiometric alloy MlB4.85 were prepared by twin-roller rapid quenching process, and their structure and electrochemical properties were studied. The results of XRD show ...The stoichiometric alloy MlB5.0 and the hypo-stoichiometric alloy MlB4.85 were prepared by twin-roller rapid quenching process, and their structure and electrochemical properties were studied. The results of XRD show that both of the alloys have a typical single-phase hexagonal CaCus-type structure. The cell volume of the hylpo-stoichiometric alloy M1B4.85 is slightly larger than that of the stoichiometric alloy M1B5.0, although its lattice constant cla is smaller. Under 2 C discharging rate, i.e. 640 mA/g, the M1B4.85 has a discharge capacity of 320 mAh/g, which is higher than that of the M1Bs.o, 312 mAh/g. Nevertheless, the capacities of the M1B4.85 and the M1Bs.o decline 24.7% and 20.2% after 400 cycles, respectively. The relationship of electrochemical performances of the alloys with their structures is discussed.展开更多
Presents a practical way of calculation for stiffness of cylindrical roller bearing based on traditional quasistatic analytical methods subject to radial force and bending moment,which take into consideration the effe...Presents a practical way of calculation for stiffness of cylindrical roller bearing based on traditional quasistatic analytical methods subject to radial force and bending moment,which take into consideration the effect of such factors as thickness of oil elastohydrodynamic film,pressure,shear force,friction force of cage,centrifugal force and slides,taken into consideration and presents the results of stiffness calculation with a typical example with an aeroengine cylindrical roller bearing were given in the paper.And,discusses the effect of major parameters’influence on stiffness.展开更多
文摘A radiative heat transfer mathematical model for a one-dimensional long furnace was set up in a through-type roller-hearth furnace （TTRHF） in compact strip production （CSP）. To accurately predict the heat exchange in the furnace, modeling of the complex gas energy-balance equation in volume zones was considered, and the heat transfer model of heating slabs and wall lines was coupled with the radiative heat transfer model to identify the surface zonal temperature. With numerical simulation, the temperature fields of gas, slabs, and wall lines in the furnace under one typical working condition were carefully accounted and analyzed. The fundamental theory for analyzing the thermal process in TI＇RI-IF was provided.
基金the National Natural Science Foundation of China (50075075)
文摘The mill roller bearing is made up of an internal ring, middlerolls and an external ring, the analysis of which is a multi-bodiescontact problem. In this paper, based on the three-dimensionalelastic contact BEM without friction, and using the structuralcharacteristics of roller bearings, middle rolls are de- scribed byelastic plate units of different shapes, which is placed on theinternal ring.
文摘A mixed method which combines the recent developed finite analytical method and the boundary fitting coordinate transformation method was used first to calculate the temperature field and thermal stress field of the cold roller in this paper. The following results are obtained by the calculation: thermal stresses σr=0, σθ=σz are maximum tension stress on the inner surface of the cold roller and σr=0, |σθ|=|σz| are maximum compression stress on the outer surface of the cold roller in the steady and unsteady case. Effectiveness and validity of the mixed method are checked with steady coil roller problems having theoretical solutions. The results show that good agreement is achived between the calculated value and theoretical solution,and the mixed method used in the paper is very workable. The mixed method is also useful in solving the steady and unsteady thermal stress field proplems of the hot -rolled for the reversing rolling mill and the continous rolling mill.
文摘The effect of roller shapes on strip buckling in a continuous annealing furnace was focused on. The tensile stress distribution, the transverse compressive stress, and the critical buckling stress of the strip were studied by the finite element method （FEM） when the flat roller, crown roller, single taper roller, and double taper roller were used, respectively. Simulation results show that strip buckling is most likely to occur with the crown roller, then the double taper roller, and finally the single taper roller. Also, strip buckling can not occur when the flat roller is used. Considering strip snaking, the single taper roller and double taper roller are suggested in the continuous annealing fur-nace. The double taper roller with a better strip snaking-prevention ability should be applied in the sections with high strip temperature, and the single taper roller with a better buckling-prevention ability should be used in the sections with low strip temperature.
基金[This project was supported by the National Natural Science Foundation of China (No. 20373016), the Key Project of In-ternational Science and Technology Cooperation of MOST of China (No. 2005DFA60580), the Key Project of Guangdong Province (No. 2005B50101003), and the Excellent Young Teachers Program of MOE of China.]
文摘The stoichiometric alloy MlB5.0 and the hypo-stoichiometric alloy MlB4.85 were prepared by twin-roller rapid quenching process, and their structure and electrochemical properties were studied. The results of XRD show that both of the alloys have a typical single-phase hexagonal CaCus-type structure. The cell volume of the hylpo-stoichiometric alloy M1B4.85 is slightly larger than that of the stoichiometric alloy M1B5.0, although its lattice constant cla is smaller. Under 2 C discharging rate, i.e. 640 mA/g, the M1B4.85 has a discharge capacity of 320 mAh/g, which is higher than that of the M1Bs.o, 312 mAh/g. Nevertheless, the capacities of the M1B4.85 and the M1Bs.o decline 24.7% and 20.2% after 400 cycles, respectively. The relationship of electrochemical performances of the alloys with their structures is discussed.
文摘Presents a practical way of calculation for stiffness of cylindrical roller bearing based on traditional quasistatic analytical methods subject to radial force and bending moment,which take into consideration the effect of such factors as thickness of oil elastohydrodynamic film,pressure,shear force,friction force of cage,centrifugal force and slides,taken into consideration and presents the results of stiffness calculation with a typical example with an aeroengine cylindrical roller bearing were given in the paper.And,discusses the effect of major parameters’influence on stiffness.
