The fundamental principle and method of the determining of structure parameters for the hydraulic elastic bulging roller were discussed. The relationship among crown of roller, hydraulic pressure and thickness of roll...The fundamental principle and method of the determining of structure parameters for the hydraulic elastic bulging roller were discussed. The relationship among crown of roller, hydraulic pressure and thickness of roller sleeve was studied. Aluminum was chosen as experimental material to accomplish the dynamic load experiment. The hydraulic elastic bulging roller exerts good effect on shape control and therefore has a broad application prospect in engineering. [展开更多
The stoichiometric alloy MlB5.0 and the hypo-stoichiometric alloy MlB4.85 were prepared by twin-roller rapid quenching process, and their structure and electrochemical properties were studied. The results of XRD show ...The stoichiometric alloy MlB5.0 and the hypo-stoichiometric alloy MlB4.85 were prepared by twin-roller rapid quenching process, and their structure and electrochemical properties were studied. The results of XRD show that both of the alloys have a typical single-phase hexagonal CaCus-type structure. The cell volume of the hylpo-stoichiometric alloy M1B4.85 is slightly larger than that of the stoichiometric alloy M1B5.0, although its lattice constant cla is smaller. Under 2 C discharging rate, i.e. 640 mA/g, the M1B4.85 has a discharge capacity of 320 mAh/g, which is higher than that of the M1Bs.o, 312 mAh/g. Nevertheless, the capacities of the M1B4.85 and the M1Bs.o decline 24.7% and 20.2% after 400 cycles, respectively. The relationship of electrochemical performances of the alloys with their structures is discussed.展开更多
Ore conveyor belt rollers operate in harsh environments,making them prone to premature failure.Their service lives are highly dependent on the stress field and bearing misalignment angle,for which limit values are def...Ore conveyor belt rollers operate in harsh environments,making them prone to premature failure.Their service lives are highly dependent on the stress field and bearing misalignment angle,for which limit values are defined in a standard.In this work,an optimization methodology using metamodels based on radial basis functions is implemented to reduce themass of twomodels of rollers.From a structural point of view,one of the rollers ismade completely of metal,while the other also has some components made of polymeric material.The objective of this study is to develop and apply a parametric structural optimization methodology to minimize the mass of the two models of rollers.To represent the mechanical behavior of the rollers,simulations were performed using the finite element method.During the numerical optimization process,the variable parameters were the dimensions of the shaft and external tube.The geometric configuration that corresponded at the same time to the lowest mass and acceptable ranges for the stress and bearingmisalignment angle was determined.With the proposed methodology,a 32.3% reduction in mass was obtained for a metal roller design and an 18.9% reduction for a polymer roller.In both cases,the constraints were not violated.For the all-metal roller,the safety factors for the maximum stress and bearingmisalignment angle were 1.44 and 1.75,respectively,while for the polymer roller the corresponding figures were 1.50 and 2.23.This work describes a low-computational-cost optimization methodology for roller designs that have been little studied in the literature.Furthermore,the methodology could be adapted for use with other types of rollers and rollers made of different materials.展开更多
The double-roller rapid quenching technology was successfully used to prepare La-Mg-Ni system hydrogen storage alloys. The effects of magnesium content and heat-treatment process on the alloys properties were studied....The double-roller rapid quenching technology was successfully used to prepare La-Mg-Ni system hydrogen storage alloys. The effects of magnesium content and heat-treatment process on the alloys properties were studied. When the alloy with 1.09%(mass fraction) Mg is heat treated at 900 ℃ for 4 h,its discharge capacity is more than 380 mA·h/g at 0.2C,and the cyclic life is beyond 500 counts at 2C. By XRD and PCI analyzing,the results show that the alloys are composed of LaNi5 and LaNi3 phase. The hydrogen absorption/desorption pressure of the alloy increases,so does the slope of plateau,and the plateau becomes broad first and narrow again as Mg content increases. This method is simple to be suitable for production on a large scale.展开更多
文摘The fundamental principle and method of the determining of structure parameters for the hydraulic elastic bulging roller were discussed. The relationship among crown of roller, hydraulic pressure and thickness of roller sleeve was studied. Aluminum was chosen as experimental material to accomplish the dynamic load experiment. The hydraulic elastic bulging roller exerts good effect on shape control and therefore has a broad application prospect in engineering. [
基金[This project was supported by the National Natural Science Foundation of China (No. 20373016), the Key Project of In-ternational Science and Technology Cooperation of MOST of China (No. 2005DFA60580), the Key Project of Guangdong Province (No. 2005B50101003), and the Excellent Young Teachers Program of MOE of China.]
文摘The stoichiometric alloy MlB5.0 and the hypo-stoichiometric alloy MlB4.85 were prepared by twin-roller rapid quenching process, and their structure and electrochemical properties were studied. The results of XRD show that both of the alloys have a typical single-phase hexagonal CaCus-type structure. The cell volume of the hylpo-stoichiometric alloy M1B4.85 is slightly larger than that of the stoichiometric alloy M1B5.0, although its lattice constant cla is smaller. Under 2 C discharging rate, i.e. 640 mA/g, the M1B4.85 has a discharge capacity of 320 mAh/g, which is higher than that of the M1Bs.o, 312 mAh/g. Nevertheless, the capacities of the M1B4.85 and the M1Bs.o decline 24.7% and 20.2% after 400 cycles, respectively. The relationship of electrochemical performances of the alloys with their structures is discussed.
基金financed by Vale S.A.Company(www.vale.com)and the Institute of Technology Vale(ITV-www.itv.org)through the Project No.SAP 4600048682.
文摘Ore conveyor belt rollers operate in harsh environments,making them prone to premature failure.Their service lives are highly dependent on the stress field and bearing misalignment angle,for which limit values are defined in a standard.In this work,an optimization methodology using metamodels based on radial basis functions is implemented to reduce themass of twomodels of rollers.From a structural point of view,one of the rollers ismade completely of metal,while the other also has some components made of polymeric material.The objective of this study is to develop and apply a parametric structural optimization methodology to minimize the mass of the two models of rollers.To represent the mechanical behavior of the rollers,simulations were performed using the finite element method.During the numerical optimization process,the variable parameters were the dimensions of the shaft and external tube.The geometric configuration that corresponded at the same time to the lowest mass and acceptable ranges for the stress and bearingmisalignment angle was determined.With the proposed methodology,a 32.3% reduction in mass was obtained for a metal roller design and an 18.9% reduction for a polymer roller.In both cases,the constraints were not violated.For the all-metal roller,the safety factors for the maximum stress and bearingmisalignment angle were 1.44 and 1.75,respectively,while for the polymer roller the corresponding figures were 1.50 and 2.23.This work describes a low-computational-cost optimization methodology for roller designs that have been little studied in the literature.Furthermore,the methodology could be adapted for use with other types of rollers and rollers made of different materials.
基金Project(06026152) supported by the Natural Science Foundation of Guangdong Province, China
文摘The double-roller rapid quenching technology was successfully used to prepare La-Mg-Ni system hydrogen storage alloys. The effects of magnesium content and heat-treatment process on the alloys properties were studied. When the alloy with 1.09%(mass fraction) Mg is heat treated at 900 ℃ for 4 h,its discharge capacity is more than 380 mA·h/g at 0.2C,and the cyclic life is beyond 500 counts at 2C. By XRD and PCI analyzing,the results show that the alloys are composed of LaNi5 and LaNi3 phase. The hydrogen absorption/desorption pressure of the alloy increases,so does the slope of plateau,and the plateau becomes broad first and narrow again as Mg content increases. This method is simple to be suitable for production on a large scale.
