Analysis of bending on the front end of sheet during hot rolling

The analysis of bending in finishing rolling was performed. An asymmetrical rolling force model was established, and the upper and lower neutral points were determined. Thc bending which resulted from the asymmetrical rolling force at the roll gap was studied and related flexibility equations were proposed according to elastic mechanics. Moreover, material mechanics was used to analyze the effects of temperature difference and self-weight on the bending out of the roll gap, and the flexibility equations were constructed. The main factors on bending were summed up, and the bending rule in the rolling could be obtained. In addition practical calculation was made with the production data of ribbon steel from Laiwu Iron ＆ Steel Group Co. Ltd.

Modeling of the Shape Forming of Composite Roll

A shape modeling of spray formed composite roll, which is utilized to predict the shape and dimension of roll during spray forming process, is developed in this paper. The influences of the principal spray forming parameters, such as the spatial distribution of melt mass flux, spray distance, rotating and translating speeds of substrate bar etc. , on the geometry and dimension of spray formed product were investigated.

TIN_DDM Buffer Surface Construction Algorithm Based on Rolling Ball Acceleration Optimization Model

In view of the TIN_DDM buffer surface existing in the construction and application of special data type,algorithm efficiency and precision are not matching;the paper applied the rolling ball model in the process of TIN_DDM buffer surface construction.Based on the precision limitation analysis of rolling ball model,the overall precision control method of rolling ball model has been established.Considering the efficiency requirement of TIN_DDM buffer surface construction,the influence principle of key sampling points and rolling ball radius to TIN_DDM buffer surface construction efficiency has been elaborated,and the rule of identifying key sampling points has also been designed.Afterwards,by erecting the numerical relationship between key sampling points and rolling ball radius,a TIN_DDM buffer surface construction algorithm based on rolling ball acceleration optimization model has been brought forward.The time complexity of the algorithm is O(n).The experiments show that the algorithm could realize the TIN_DDM buffer surface construction with high efficiency,and the algorithm precision is controlled with in 2σ.

KDD-based rolling schedule model for plate mill

A novel method for generating a rolling schedule is presented, which is fundamentally different from the existing ones. KDD (knowledge discovery in database) techniques are applied for discovering association rules between rolling parameters in a large database of rolling operation, and based on these rules, the schedule for the crucial last six finishing passes is generated. Operational evaluation shows that the schedule generated by the new method outperforms that generated by existing methods. It also shows how in this application the human's domain knowledge is applied to speed up the KDD process and to ensure the validity of the knowledge discovered.

Model of Aluminium Foil Rolling Force Based on Neural Networks

Based on the principle of BP neural networks, the rolling force model is established after thoroughly analyzing and reprocessing the data of 1 350 mm aluminium foil mill. It states that the difference between the output of artificial neural networks rolling force model and the real value is in the order of 3 percent. The model reflects the real feature of process.

The finite element analysis of articular cartilage fiber-reinforced composite model under rolling load

Articular cartilage is a layer of low-friction,load-bearing soft hydrated tissue covering bone-ends in diarthrosis,which plays an important role in spreading the load,reducing the joint contact stress,joint friction and wear during exercise.The vital mechanical function

Modeling of Heat Transfer and Solidification of Composite Roll

Modeling of heat transfer and solidification of composite roll was established and used to predict the thermal history and solidification process of roll during spray forming. Evolution of temperature field of the preform and cooling rate in the growing deposit during spray deposition and post-deposition were numerically simulated.

Blockchain technology‑based FinTech banking sector involvement using adaptive neuro‑fuzzy‑based K‑nearest neighbors algorithm

The study aims to investigate the financial technology(FinTech)factors influencing Chinese banking performance.Financial expectations and global realities may be changed by FinTech’s multidimensional scope,which is lacking in the traditional financial sector.The use of technology to automate financial services is becoming more important for economic organizations and industries because the digital age has seen a period of transition in terms of consumers and personalization.The future of FinTech will be shaped by technologies like the Internet of Things,blockchain,and artificial intelligence.The involvement of these platforms in financial services is a major concern for global business growth.FinTech is becoming more popular with customers because of such benefits.FinTech has driven a fundamental change within the financial services industry,placing the client at the center of everything.Protection has become a primary focus since data are a component of FinTech transactions.The task of consolidating research reports for consensus is very manual,as there is no standardized format.Although existing research has proposed certain methods,they have certain drawbacks in FinTech payment systems(including cryptocurrencies),credit markets(including peer-to-peer lending),and insurance systems.This paper implements blockchainbased financial technology for the banking sector to overcome these transition issues.In this study,we have proposed an adaptive neuro-fuzzy-based K-nearest neighbors’algorithm.The chaotic improved foraging optimization algorithm is used to optimize the proposed method.The rolling window autoregressive lag modeling approach analyzes FinTech growth.The proposed algorithm is compared with existing approaches to demonstrate its efficiency.The findings showed that it achieved 91%accuracy,90%privacy,96%robustness,and 25%cyber-risk performance.Compared with traditional approaches,the recommended strategy will be more convenient,safe,and effective in the transition period.

Applicability of discrete element method with spherical and clumped particles for constitutive study of granular materials

Discrete element method(DEM)has been intensively used to study the constitutive behaviour of granular materials.However,to what extent a real granular material can be reproduced by virtual DEM simulations remains unclear.This study attempts to answer this question by comparing DEM simulations with typical features of experimental granular materials.Three groups of models with spherical and clumped particles are investigated from four perspectives:(i)deviatoric stress and volumetric behaviour;(ii)critical state behaviour;(iii)stress-dilatancy relationship;and(iv)the evolution of principal stress ratio against axial strain.The results demonstrate that DEM with spherical or clumped particles is capable of qualitatively describing macroscopic deviatoric stress responses,volumetric behaviour,and critical state behaviour observed in experiments for granular materials.On the other hand,some qualitative deviations between experiments and the investigated DEM simulations are also observed,in terms of the stress-dilatancy behaviour and principal stress ratio against axial strain,which are proven to be critical for constitutive modelling.The results demonstrate that DEM with spherical or clumped particles may not necessarily fully capture experimental features of granular materials even from a qualitative perspective.It is thus encouraged to thoroughly validate DEM with experiments when developing constitutive models based on DEM observations.

Finite Element Simulation of Flexible Roll Forming with Supplemented Material Data and the Experimental Verification

Flexible roll forming is a promising manufacturing method for the production of variable cross section products. Considering the large plastic strain in this forming process which is much larger than that of uniform deformation phase of uniaxial tensile test, the widely adopted method of simulating the forming processes with non-supplemented material data from uniaxial tensile test will certainly lead to large error. To reduce this error, the material data is supplemented based on three constitutive models. Then a finite element model of a six passes flexible roll forming process is established based on the supplemented material data and the original material data from the uniaxial tensile test. The flexible roll forming experiment of a B pillar reinforcing plate is carried out to verify the proposed method. Final cross section shapes of the experimental and the simulated results are compared. It is shown that the simulation calculated with supplemented material data based on Swift model agrees well with the experimental results, while the simulation based on original material data could not predict the actual deformation accurately. The results indicate that this material supplement method is reliable and indispensible, and the simulation model can well reflect the real metal forming process. Detailed analysis of the distribution and history of plastic strain at different positions are performed. A new material data supplement method is proposed to tackle the problem which is ignored in other roll forming simulations, and thus the forming process simulation accuracy can be greatly improved.

Modeling deformation resistance for hot rolling based on generalized additive model

A model of deformation resistance during hot strip rolling was established based on generalized additive model.Firstly,a data modeling method based on generalized additive model was given.It included the selection of dependent variable and independent variables of the model,the link function of dependent variable and smoothing functional form of each independent variable,estimating process of the link function and smooth functions,and the last model modification.Then,the practical modeling test was carried out based on a large amount of hot rolling process data.An integrated variable was proposed to reflect the effects of different chemical compositions such as carbon,silicon,manganese,nickel,chromium,niobium,etc.The integrated chemical composition,strain,strain rate and rolling temperature were selected as independent variables and the cubic spline as the smooth function for them.The modeling process of deformation resistance was realized by SAS software,and the influence curves of the independent variables on deformation resistance were obtained by local scoring algorithm.Some interesting phenomena were found,for example,there is a critical value of strain rate,and the deformation resistance increases before this value and then decreases.The results confirm that the new model has higher prediction accuracy than traditional ones and is suitable for carbon steel,microalloyed steel,alloyed steel and other steel grades.

Optimization and perfection of the roughing model for ferritic SUS430

Based on the characteristics of ferritic SUS430 heating and deformation,and combined with the features of the 1780 mm hot-rolling mill,a roughing model was introduced in two aspects:optimizing the rough rolling passes and improving the width control precision.Through reducing the rough rolling passes,the rough rolling time can be shortened,the precision rolling startup temperature can be raised and the yield of the hot-rolled products can be increased.Moreover,on the premise that the slab width fluctuation was great,the precision of the width control can be improved through optimizing the parameters of the hot-rolling width control model.The result shows that the optimization and perfection of the original rolling process of the stainless steel 430 series further improved its capacity and product quality.

Roll gap prediction in acceleration and deceleration process of cold rolling based on a data-driven method

Severe fluctuation of the effective roll gap in the acceleration and deceleration section of the cold rolling process is a significant factor causing thickness deviation.However,the conventional roll gap compensation method and control strategy do not meet the stringent strip quality requirements.The roll gap model in the acceleration and deceleration process is studied to increase the thickness control precision.In order to improve model accuracy,a roll gap prediction method based on data-driven is proposed.Given the complexities of the cold rolling process,the extreme gradient boosting(XGBoost)method is used to predict the roll gap model as the rolling speed changes.Meanwhile,support vector regression and neural network-based methods are taken to evaluate and compare the prediction performances.Based on the field data,the simulation experiments are carried out.It demonstrated that the prediction performance of the proposed method outperformed the other two methods.The values of root mean square error,determination coefficient value,mean absolute percentage error and mean absolute error obtained from the XGBoost model were equal to 0.000346,0.952,7.02,and 0.00028,respectively.In addition,the proposed method analyzed the contribution rates of the rolling affecting parameters on the roll gap.The data showed that in the controllable rolling parameters,the rolling speed is the most impacting factor that disturbs the roll gap model in the acceleration and deceleration process,which can provide a useful direction for actual roll gap adjustment.

Improvement of 3-D FEM Coupled Model on Strip Crown in Hot Rolling

In order to simulate and analyze hot strip crown and flatness accurately and efficiently, the 3-D （three-di- mensional） coupled model involved in RPFEM （rigid-plastic finite element method） is improved based on the analyti- cal model of forecasting rolling force distribution. In the analytical model, variational method is employed to solve the lateral flow of metal and influential function method is employed to calculate roll deflection, the lateral distribution of rolling force can be obtained rapidly by iterative strategy. Then the 3-D coupled model uses the result as initial distri- bution of rolling force to calculate roll deflection and makes the initial on-load roll gap profile close to the final value, so as to reduce iterations and increase efficiency. Compared with previous algorithms, the improved model can reduce the iterations by about 50% and shorten the computing time by about 60% on the basis of the calculation accuracy.

A 3-D Differential Method for Solving Rolling Force of PC Hot Strip Mill

The character of the deformation zone on pair cross rolls is different from that of the regular 4-high mill. Considering comprehensive influences of normal stress and shear stress in rolling direction, width direction and thickness direction, the rolling force calculation model of the PC （pair crossed） hot strip mill is built. Taking the entry stress and the exit stress of strip as the boundary conditions, the longitudinal and transverse distribution of rolling force is worked out by the differential method. Then the total rolling force is calculated, and calculated results are verified by experimental data.

Symmetric and Asymmetric Rolling Pure Copper Foil: Crystal Plasticity Finite Element Simulation and Experiments

A systematic study has been conducted aiming to attain an insight into the influence of coefficient of roll speed asymmetry, crystal orientation and structure on the deformation behavior, and crystallographic orientation development during foil rolling. Simulations were successfully carried out by using crystal plasticity finite element method（CPFEM）,and a novel computational framework is presented for the representation of virtual polycrystalline grain structures. It has been found that asymmetric rolling（ASR） is more efficient in producing plastic deformation since it develops additional shear strain and activity of slip system compared with symmetric rolling（SR）. For ASR, increase in the length of the shear zone, and decrease in the amount of the pressure and roll force would lead to further reduction. The shear strain path in SR and ASR is strictly influenced by the misorientation of neighbor grains, and corresponding {1 1 1} pole figures offer direct evidence of the spread of crystallographic orientation around the normal direction. The activity of slip systems was examined in detail and found that the predicted results are consistent with the surface layer model. The accuracy of the developed CPFEM model is verified by the fact that the simulated results of roll force coincide well with the experimental results.