Flow stress equation in range of intermediate strain rates and high temperatures to predict roll force in four-pass continuous rod rolling

A flow stress equation was proposed to compute the roll force in the finishing stands of an actual rod mill where the strain rate and the temperature of the material range from 100 to 400 s-1 and from 900 to 1050 ℃,respectively.The underlying idea is to modify the Shida model and Misaka model,which provide flow stress equations（constitutive equations） frequently used to depict deformation behavior of high temperature material at different strain rates.The modified model was coupled with finite element method to compute the roll force during four-pass continuous rod rolling,where strain rates are in the range of 100-400 s-1 at high temperatures（900-1050 ℃）.The roll forces and the surface temperatures of the material at each stand were measured,and the measured data were compared with the computed values.Results reveal that the Misaka model is better than the Shida model for high temperatures and intermediate strain rates.The roll force error was-5.7 % when the Misaka model was used at 900 ℃.However,the error increased by-15.2% at 1050 ℃.When the modified Misaka model was used,the error was reduced to 1.8% on average.It can consequently be deduced that the modified Misaka model can be used to depict the deformation resistance behavior in intermediate ranges of strain rate and high temperature ranges in continuous rod rolling process.

Modeling and finite element analysis of rod and wire steel rolling process

Two thermomechanical coupled elastic-plastic finite element （FE） models were developed for predicting the 12-pass continuous rolling process of GCrl 5 rod and wire steel. The distances between stands in the proposed models were set according to the actual values, and the billets were shortened in the models to reduce the calculation time. To keep the continuity of simulation, a technique was developed to transfer temperature data between the meshes of different models in terms of nodal parameters by interpolation functions. The different process variables related to the rolling process, such as temperature, total equivalent plastic strain, equivalent plastic strain rate, and contact friction force, were analyzed. Also, the proposed models were applied to analyze the reason for the occurrence of an excessive spread in width. Meanwhile, it was also utilized to assess the influence of the roll diameter change on the simulated results such as temperature and rolling force. The simulated results of temperature are found to agree well with the measured results.

Finite Element Simulation of Rod and Wire Continuous Rolling

This paper discusses the application of several techniques involved in the development of the 3D finite element (FE) models of rod and wire continuous rolling process.The FE models are implemented into the FE-program MSC.Marc and used to investigate the thermal and mechanical behavior of billet during the rolling process.All nonlinear equations included in the models are solved by the static and dynamic procedures,respectively.Data transfer technique is proposed to keep the continuity of simulation results.And the computational time of static procedure is significantly reduced by using a rigid pushing body.In all models,the constant time step method and the auto time step method are respectively used to define time step for the solution of equations.Simulation results of the models with different time step methods are compared.And comparison between calculated values and measured ones of the temperature at the surface of billet shows the validity of the FE models.