Carbon Doping Triggered Efficient Electrochemical Hydrogen Evolution of Cross-Linked Porous Ru-MoO_(2) Via Solid-Phase Reaction Strategy

The defect-free structure of Mo-based materials is a“double-edged sword”,which endows the material with excellent stability,but limits its chemical versatility and application in electrochemical hydrogen evolution reaction(HER).Carbon doping engineering is an attractive strategy to effectively improve the performance of Mo-based catalyst and maintain their stability.Herein,we report a cross-linked porous carbon-doped MoO_(2)(C–MoO_(2))-based catalyst Ru/C–MoO_(2) for electrochemical HER,which is prepared by the convenient redox solid-phase reaction(SPR)of porous RuO_(2)/Mo_(2)C composite precursor.Theoretical studies reveal that due to the presence of carbon atoms,the electronic structure of C–MoO_(2) has been properly adjusted,and the loaded small Ru nanoparticles provide a fast water dissociation rate and moderate H adsorption strength.In electrochemical studies under a pH-universal environment,Ru/C–MoO_(2) electrocatalyst exhibits a low overpotential at a current density of 10 mA cm^(-2) and has a low Tafel slope.Meanwhile,Ru/C-MoO_(2) has excellent stability for more than 100 h at an initial current density of 100 mA cm^(-2).

Scalable solid-phase synthesis of defect-rich graphene for oxygen reduction electrocatalysis

Defect-engineered carbon materials have been emerged as promising electrocatalysts for oxygen reduction reaction(ORR)in metal-air batteries.Developing a facile strategy for the preparation of highly active nanocarbon electrocatalysts remains challenging.Herein,a low-cost and simple route is developed to synthesize defective graphene by pyrolyzing the mixture of glucose and carbon nitride.Molecular dynamics simulations reveal that the graphene formation is ascribed to two-dimensional layered feature of carbon nitride,and high compatibility of carbon nitride/glucose systems.Structural measurements suggest that the graphene possesses rich edge and topological defects.The graphene catalyst exhibits higher power density than commercial Pt/C catalyst in a primary Zn-air battery.Combining experimental results and theoretical thermodynamic analysis,it is identified that graphitic nitrogen-modified topological defects at carbon framework edges are responsible for the decent ORR performance.The strategy presented in this work can be can be scaled up readily to fabricate defective carbon materials.

Preparation of Lead-free Base Glaze Suitable for Pearlescent Pigments by Low-temperature Solid-phase Reaction with Alkali Waste

A lead-free base glaze suitable for pearlescent pigments was prepared by a low-temperature solid-phase reaction with alkali waste.Tests were performed to evaluate the effects of the sintering conditions and alkali waste composition on the prepared base glaze and pearlescent glaze.The experimental results show that partially replacing SiO_(2) with B_(2)O_(3) effectively reduced the sintering temperature and time to form a glass network,but the network structure becomes disconnected as the B_(2)O_(3) content increases.An amorphous base glaze was obtained when soda ash was replaced with a small amount of alkali waste,but increasing the addition of NaCl further was adverse to base glaze formation by resulting in crystallization of the base glaze and a decrease in the bridging oxygen content.The pearlescent pigment was thermally stable in the glaze at 750℃,while higher temperatures caused the crystalline phase of NaAlSiO_(4) to appear and adhere to the surface of pigment granules,which degraded the pearlescent effect of the glaze.

Use of Magic Angle Spinning ~1H NMR Spectroscopy to Monitor Reactions in Solid-Phase Synthesis

Proton NMR-spectra of Wang resin bound compounds were obtained using the magic angle spinning 1HNMR technique with standard equipment. It was possible to analyse the spectra to evaluate their utility in solid-phase chernistry. A typical example was presented, which could directly monitor solid-phase reactions

Ag3PO4 Microcrystals Synthesized by Room-Temperature Solid State Reaction:Enhanced Photocatalytic Activity and Photoelectronchemistry Performance

Ag3PO4 microcrystals with highly enhanced visible light photocatalytic activity are prepared by a facile and simple solid state reaction at room temperature. The composition, morphology and optical properties of the asprepared Ag3PO4 microcrystMs are characterized by x-ray diffraction, scanning electron microscopy and UV-vis diffuse reflectance spectra. The photocatalytie properties of Ag3PO4 are investigated by the degradation of both methylene blue and methyl orange dyes under visible light irradiation. The as-prepared Ag3PO4 microcrystals possess high photocatalytic oxygen production with the rate of 673μmolh-1g-1. Moreover, the as-prepared Ag3PO4 microcrystals show an enhanced photoelectrochemistry performance under irradiation of visible light.

Understanding Sulfur Redox Mechanisms in Different Electrolytes for Room-Temperature Na-S Batteries

This work reports influence of two different electrolytes,carbonate ester and ether electrolytes,on the sulfur redox reactions in room-temperature Na-S batteries.Two sulfur cathodes with different S loading ratio and status are investigated.A sulfur-rich composite with most sulfur dispersed on the surface of a carbon host can realize a high loading ratio(72%S).In contrast,a confined sulfur sample can encapsulate S into the pores of the carbon host with a low loading ratio(44%S).In carbonate ester electrolyte,only the sulfur trapped in porous structures is active via‘solid-solid’behavior during cycling.The S cathode with high surface sulfur shows poor reversible capacity because of the severe side reactions between the surface polysulfides and the carbonate ester solvents.To improve the capacity of the sulfur-rich cathode,ether electrolyte with NaNO_(3) additive is explored to realize a‘solid-liquid’sulfur redox process and confine the shuttle effect of the dissolved polysulfides.As a result,the sulfur-rich cathode achieved high reversible capacity(483 mAh g^(−1)),corresponding to a specific energy of 362 Wh kg^(−1) after 200 cycles,shedding light on the use of ether electrolyte for high-loading sulfur cathode.

Room-temperature conversion of ethane and the mechanism understanding over single iron atoms confined in graphene

The catalytic conversion of ethane to high value-added chemicals is significantly important for utilization of hydrocarbon resources.However, it is a great challenge due to the typically required high temperature(> 400 ℃) conditions.Herein, a highly active catalytic conversion process of ethane at room temperature(25 ℃) is reported on single iron atoms confined in graphene via the porphyrin-like N4-coordination structures.Combining with the operando time of flight mass spectrometer and density functional theory calculations, the reaction is identified as a radical mechanism, in which the C–H bonds of the same C atom are preferentially and sequentially activated, generating the value-added C2 chemicals, simultaneously avoiding the over-oxidation of the products to CO2.The in-situ formed O–FeN4–O structure at the single iron atom serves as the active center for the reaction and facilitates the formation of ethyl radicals.This work deepens the understanding of alkane C–H activation on the FeN4 center and provides the reference in development of efficient catalyst for selective oxidation of light alkane.

Effect of Annealing Temperature and Atmosphere to Surface Solid Phase Reaction of Sapphire Substrates and Spin-Coated Copper Nitrate Gel Films

The solid-phase reaction of sapphire (Al2O3) substrates and spin-coated copper nitrate films was studied. X-ray diffraction analysis revealed that a CuO fraction was observed by annealing at temperatures higher than 800℃. In addition, crystalline CuAlO2 was formed at annealing temperatures in the range of 900℃ – 1000℃ by solid-phase reaction of the spin-coated films and sapphire substrate. Crystalline CuAlO2 was formed by annealing at 1000℃ for 5 - 10 h, and CuAl2O4 was formed by annealing at 1000℃ for 15 h. When annealing under N2 flow, Cu2O was observed rather than CuAlO2. For a sample annealed in air at 1000℃ for 5 h, X-ray photoelectron spectroscopy measurements at various depths from surface revealed that Cu2+ ions are located around the surface, which suggests that the CuO fraction is present near the surface while the CuAlO2 fraction is located at greater depths from the surface of the samples. The depth profile of the sample suggests that there is no pure CuAlO2 layer in the sample, but that crystalline CuAlO2 is present in the sample as a mixture with CuO and Al2O3.

A high-loading and cycle-stable solid-phase conversion sulfur cathode using edible fungus slag-derived microporous carbon as sulfur host

Developing a high sulfur(S)-loading cathode with high capacity utilization and long term cyclability is a key challenge for commercial implementation of Li-S battery technology.To overcome this challenge,we propose a solid-phase conversion sulfur cathode by using an edible fungus slag-derived porous carbon(CFS)as sulfur host to fabricate the S/CFS composite and meanwhile,utilizing the vinyl carbonate(VC)as co-solvent of the ether-based electrolyte to in-situ form a protective layer on the S/CFS composite surface through its nucleophilic reaction with the freshly generated lithium polysulfides(LiPSs)at the very beginning of initial discharge,thus isolating the interior sulfur from the outer electrolyte and inhibiting the further generation of soluble LiPSs.Benefitting from the ultrahigh specific surface area of>3,000 m^(2)·g^(−1),ideal pore size of<4 nm,and large pore volume of>2.0 cm^(3)·g^(−1)of the CFS host matrix,the S/CFS cathode even with a high S-loading of 80 wt.%(based on the weight of S/CFS composite)can still operate in a solid-phase conversion manner in the VC-ether co-solvent electrolyte to exhibit a high reversible capacity of 1,557 mAh·g^(−1),a high rate capability with 50%remaining capacity at 2 A·g^(−1)and a high cycling efficiency of 99.9%over 500 cycles.The results presented in this work suggest that a combined action of solid-phase conversion electrochemistry and nanoarchitectured host structure may provide a new path for the design and development of practical lithium-sulfur batteries.

Synthesis and Characterization of Rare Earth Ion Doped Nano ZnO

Zinc oxide(ZnO) doped with erbium at different concentrations was synthesized by solid-state reaction method and characterized by X-ray diffraction(XRD), scanning electron microscopic(SEM), UVabsorption spectroscopy, photoluminescence(PL) study and vibrating sample magnetometer. The XRD studies exhibit the presence of wurtzite crystal structure similar to the parent compound ZnO in 1% Er^(3+)doped Zn O,suggesting that doped Er^(3+)ions sit at the regular Zn^(2+)sites. However, same studies spread over the samples with Er^(3+)content>1% reveals the occurrence of secondary phase. SEM images of 1% Er^(3+)doped ZnO show the polycrystalline nature of the synthesized sample. UV-visible absorption spectrum of Er^(3+)doped ZnO nanocrystals shows a strong absorption peak at 388 nm due to ZnO band to band transition. The PL study exhibits emission in the visible region, due to excitonic as well as defect related transitions. The magnetizationfield curve of Er^(3+)doped ZnO nanocrystals showed ferromagnetic property at room-temperature.

Preparation of (Ti, Sn)O_2 Nano-Composite Photocatalyst by Supercritical Fluid Dry Combination Technology

A series of TiO2-SnO2 nano-sized composite photo-catalysts containing Sn (9.3%-30.1%) were prepared from TiCI4 and SnCl4·5H2O by using sol-gel, supercritical fluid dry and solid-phase reaction (SCFD) combination technology. Characterizations with X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier Transform Infrared Spectroscopy (FTIR) showed that, in addition to anatase type TiO2, a new active phase (Ti, Sn)O2 (with particle size of 2.0-4.3 nm) formed, and there were no SnO2 crystals observed in the range of the doping concentration studied. Photo-catalytic reaction of phenol was used as a model reaction to evaluate the catalytic activities of the obtained catalysts. Compared with pure TiO2 or Ti-Sn catalyst prepared with general sol-gel method, Ti-Sn nano-composite photo-catalyst thus obtained showed significant improvement in catalytic activity. The photo-catalytic degradation rate of phenol could reach as high as 93.5% after 7 h. The preparation conditions of the new phase (Ti, Sn)O2 were investigated and its catalytic mechanism was proposed. The photo-catalytic particles prepared using SCFD combination technology exhibited small particle size, large surface area and high activity.

Solid Phase Synthesis of 1,4-Disubstituted 1,2,3-Triazole from Polystyrene-supported Selenium Resin

We report here a solid-phase synthesis of 1, 4-disubstituted 1, 2, 3-triazole using polystyrene-supported selenium resin. The resin used here not only works as a simple linker, but also assists the crucial α-alkylation reaction and selenoxide syn-elimimation, which ensures the purity of the products.

Solid-Phase Organic Synthesis of Aryl Vinyl Ethers Using Sulfone-Linking Strategy

A novel facile solid-phase organic synthesis of aryl vinyl ethers by reaction of polystyrene-supported 2-phenylsulfonylethanol with phenols under Mitsunobu conditions and subsequent elimination reaction with DBU has been developed. The advantages of this method include straightforward operation, good yield and high purity of the products. Alternatively, a typical example of Suzuki coupling reaction on-resin was further applied to prepare 4-phenylphenyl vinyl ether for extending this method.

Spontaneous Changes of Solid 5,7-di-<i>tert</i>-butylspiro(2,5)octa-4,7-diene-6-one in Storage Conditions at Room Temperature

On an example of spontaneous changes 5,7-di-tert-butylspiro (2,5) octa-4,7-diene-6-one at room temperature, a new example of condensations in a solid station is opened. The single crystal of 2-(3’, 5'-di-tert-butyl-4'-hydroxy-phenyl)-ethyloxy-p-cresole is produced as result of a structure transformation 5,7-di-tert-butylspiro (2,5) octa-4,7-diene-6-one in a solid phase at room temperature except a single crystal at transformation 5,7-di-tert-butylspiro (2,5) octa-4,7-diene-6-one a new substance is formed too. Spectrums 1Н and 13С NMR differ from similar spectrums of initial compound and the single crystal. New substance represents an admixture of isomeric compounds, capable reversible to be transformed in initial 5,7-di-tert-butylspiro(2,5) octa-4,7-diene-6-one and 2-(3’, 5'-di-tert-butyl-4'-hydroxyphenyl)-ethyloxy-p-cresole.

Recent advances in chemical protein synthesis:method developments and biological applications

The central dogma of modern biology underscores the pivotal roles proteins play in diverse biological processes,the study of which necessitates advanced methods to produce proteins with precision and versatility.Chemical protein synthesis,a powerful approach utilizing chemical reactions for the de novo construction of structurally accurate proteins,has emerged as a transformative tool for studying proteins and generating protein derivatives/mimics inaccessible by natural biological machinery,including post-translationally modified proteins,proteins comprised of unnatural amino acids,as well as mirror-image proteins.This review summarizes recent strides in synthetic method developments for chemical protein synthesis,including innovative techniques in solid-phase peptide synthesis,the challenges presented by difficult sequences in either synthesis or folding and the exploration of novel ligation reactions using both chemical and enzymatic methods.Furthermore,the review also delves into newly developed protocols for site-selective protein modifications and the generation of stapled or macrocyclized peptides/miniproteins,highlighting the power of chemical methods to make structurally diverse proteins.Recent applications of synthetic proteins in investigating post-translational modifications(phosphorylation,lipidation,glycosylation,ubiquitination,etc.),mirror-image biological processes and drug development are further discussed.Together,these topics provide a comprehensive overview of the current landscape of chemical protein synthesis.

Solid-Liquid State Bonding of Si3N4 Ceramics with Ceramic-Modified Brazing Alloy

Solid-liquid state bonding of Si3N4 ceramics with TiN-modified Ag-Cu-Ti brazing alloy was used'- to enhance joint strength. The effects of the TiN particles on the microstructures, interfacial reactions, and room-temperature properties of the joints were investigated. The results show that the TiN particles are gen- erally well dispersed in the Ag-Cu eutectic base and the interface between them is both clean and com-pact. Changes in the TiN volume fractions from 0 to 20% exert no noticeable effect on the interfacial reac-tion between Ag-Cu-Ti and the substrates. Other bonding parameters being constant, the TiN volume frac-tion in the filler material plays a key role in the joint properties. For TiN volume fractions below 20%, the joints are reinforced, especially joints with 5% and 20% TiN. The average shearing strength of joints with 5% TiN is 200.8 MPa, 30% higher than that of joints with no TiN (154.1 MPa). However, for TiN volumes frac- tions above 20%, the joint strengths decrease.

Potassium Tantalate K6Ta10.8O30 with Tungsten Bronze Structure and Its Photocatalytic Property

With the tunable and flexible physicochemical properties, tantalate photocatalysts with tungsten bronze struc- ture are worth being studied. In this work, we successfully synthesized a novel potassium tantalate K6Talo.8030 with tungsten bronze structure using a facile solid-state reaction route. The effects of calcination time on the phase com- position, morphology and crystallinity of the obtained samples were studied by XRD and SEM analyses. In addition, the photocatalytic activity of the samples was evaluated by the degradation of ARG dye under UV light irradiation. The results indicated that the K6Talo.8030 showed high photocatalytic activity for degradation of ARG and the pho- tocatalytic degradation of ARG followed the first order kinetics. Furthermore, the possible photocatalytic mecha- nism of the K6TamsO30 photocatalyst was proposed based on tungsten bronze structure feature and the scavengers experimental results. This study would give a new insight into tantalate photocatalysts.

First Investigation of Nonlinear Optical Oxychalcogenide with Three-Dimensional Anionic Framework and Special Windmill-Like Functional Motifs

Oxychalcogenides have been drawn much attention to be explored as nonlinear optical(NLO)materials in recent years.To date,all the NLO oxychalcogenides crystallize in low dimensional structures.Herein,a new oxysulfide K_(2)Ba_(0.5)Ga_(9)O_(2)S_(13) was obtained via three-dimensional(3D){[Ga_(9)O_(2)S_(13)]^(3-)}_(∞)polyanionic framework.As the first oxychalcogenide with 3D NLO-acitve polyanionic framework,K_(2)Ba_(0.5)Ga_(9)O_(2)S_(13) has a wide band gap of 3.72 eV,and exhibits a high laser-induced damage threshold(LIDT,17×AgGaS_(2)).It presents moderate phase-matchable NLO response of 0.5×AgGaS_(2) at 2.1μm and 2×KH_(2)PO_(4) at 1.064μm.The theoretical calculation results indicate that the NLO response is mainly contributed from[Ga(2)S4]unit-built[Ga(2)_(3)S_(10)]windmill-like motif.This work may stimulate the exploration of more NLO oxychalcogenides with balanced performances.