Design, Development and Geometric Error Analysis of an Aerostatic Rotary Table

Rotary tables are equipments in precision machinery applied in five-axis Machine Tools and CMM （Coordinate Measuring Machines）, offering rotational （C-axis） and tilting motion （A-axis）, allowing the obtaining of several configurations for manufacturing or inspection of parts with complex geometries. The demand for high accuracy, high efficiency and fewer errors in the positioning of the part in precision machines increases every day, thus ensuring their high confidence and the use of aerostatic bearings enable constructive innovations to the equipment. In this context, this work presents the mechanical design, the development and error analysis of a prototype of an aerostatic rotary table. This study emphasizes the analysis of a prototype that uses the air as a working principle for reducing friction between moving parts, increasing the mechanical efficiency, and its influence of motion error is also discussed based on the experimental results. For the geometrical errors analysis, experimental tests were realized in laboratory using a DBB （Double Ballbar）. The tests are performed with only one axis moving, observing the behavior of the system for different feedrate at the C-axis.

Novel approach for determining the optimal axial preload of a simulating rotary table spindle system

This paper presents a new theoretical model to determine the optimal axial preload of a spindle system, for challenging the traditional method which relies heavily on experience of engineers. The axial preloading stiffness was treated as the sum of the spindle modal stiffness and the framework elastic stiffness, based on a novel concept that magnitude of preloads can be controlled by measuring the resonant frequency of a spindle system. By employing an example of a certain type of aircraft simulating rotary table, the modal stiffness was measured on the Agilent 35670A Dynamic Signal Analyzer by experimental modal analysis. The equivalent elastic stiffness was simulated by both finite element analysis in ANSYS? and a curve fitting in MATLAB?. Results showed that the static preloading stiffness of the spindle was 7.2125×107 N/m, and that the optimal preloading force was 120.0848 N. Practical application proved the feasibility of our method.

Stroke optimization of a novel multi-station rotary polishing robot based on workspace analysis

In order to meet the polishing requirement of faucets and other products,a novel multi-station rotary polishing robot is designed,which is a PPPR + RR type of degree of freedom( DOF) distribution structure,and is similar to dual-arm robot. Forward and inverse kinematic analysis is carried out by robot modeling. In order to make this robot structure more compact,first of all,X,Y and Z three moving degrees of freedom( DOF) limit stroke polishing need is calculated by using an artificial fish swarm algorithm,which analyzes dexterous workspace of this robot. Then,on the basis of the above analysis,the three DOF stroke is optimized. Simulation and polishing experimental results verify that this polishing robot with optimized stroke parameters can meet the polishing needs of faucets and other bathroom pieces.

Rotary axis calculation for five-axis FDM printer using a point-fitting optimization method

This paper presents an optimization method to compute the rotary axes of a 5-axis FDM printer whose A-and C-axes have large deviations relative to the x-and z-directions.The optimization model is designed according to the kinematic model in which a point rotates around a spatial line in the machine coordinate system of the printer.The model considers the A-and C-axes as two spatial lines.It is a two-object optimization model including two aspects.One is that the sum of deviations between the measured and computed points should be small;the other is that the deviations should be uniformly distributed for every measured point.A comparison of the new optimization method with conventional error-compensation methods reveals that the former has higher location accuracy.Using the optimized AC axes,5-axis 3D printing paths are planned for some complex workpieces.Data analysis and printing samples show that the optimized AC axes satisfy 5-axes FDM printing requirements for nozzles with a diameter of 1.0 mm.

Study of the influences of rotary table speed on stick-slip vibration of the drilling system

Stick-slip vibration presents one of the major causes of drilling problems,such as premature tool failures,low drilling efficiency and poor wellbore quality.The objective of this work is to investigate the influences of rotary table speed(RTS)on stick-slip phenomenon of the drilling system.In this study,the drilling system is treated as a lumped torsional pendulum model of which the bit/rock interaction is regarded as Coulomb friction.By analyzing cases with different RTS,two types of vibrations on the bit are found:stick-slip vibration and uniform motion.With an increase in the RTS,the stick-slip vibration on the drill bit disappears once the RTS arrives at its critical value.For the cases that stick-slip vibrations occur,the phase trajectories converge toward a limit cycle.For the cases that stick-slip vibration does not appear,the drill bit tends to stabilize at a uniform motion and the phase trajectories correspond to contracting spirals observed in the phase plane.

Modeling and analysis of steady-state vibration induced by backlash in servo rotary table

Backlash cannot be always avoided in mechanical systems because of wear or looseness. Steady-state vibration may be induced by backlash in closed loop feed drive systems. This paper presents a mathematical model ofa servo rotary table, considering the effect of backlash. The accuracy of this model is verified by an experiment. The influences of the parameters, such as position controller gain, velocity controller gain, load and the magnitude of backlash, on steady-state vibration are discussed. The steady-state vibration amplitude increases with the position controller gain, load and the magnitude of backlash. The steady-state vibration fre- quency increases with the position controller gain and the velocity controller gain, while an increase in load leads to a decrease in the frequency.

Machine vision for drill string slip status detection

Slip status of drill string is system generated binary value computed by comparison of sensor generated real time hook load value with a minimum threshold value of hook load stored in measurement system.This research article describes a novel method of slip status detection by machine vision technology which helps overcome the constraints of slip status detection with legacy measurement method.It also helps improve the real time drilling data quality and optimize and automate drilling operations.A method to detect drill string slip status with high-resolution digital camera installed on mast near rig floor is described along with backend vision processing and communication modules,which generate binary values of slip status.The binary values are transferred in real time to drilling measurement system of rig to compute other drilling parameters like bit depth,hole depth and stand counters.This method includes deploying active optical sensors at the rig floor,obtaining 1-D,2-D,or 3D image data,and processing it to obtain the status of drill string.Reliable measurement of slip status by machine vision helps reduce non-productive time(NPT)by reliable real time surveillance of drilling operations.