Rotating extrusion technique and its effect on quality of aluminum alloy thin-plate weldments

A new technique named rotating extrusion was proposed that uses rotating extrusion action to rectify residual distortion of aluminum alloy thin-plate weldments to improve mechanical properties of welded joints. The basic principle and device of rotating extrusion were introduced. The residual distortion and stresses in rotating extrusion weldments were compared with those in conventional weldments. The differences in microstructure and mechanical properties between conventional welded joints and rotating extrusion welded joints were investigated and analyzed in order to make clear the effect of rotating extrusion on the performance of aluminum alloy weldments. Experimental results show that rotating extrusion can enhance the hardness and tensile strength of aluminum alloy welded joints evidently. This method has also potential effect on extending the life of welded structures.

An exact solution for flow past an accelerated horizontal plate in a rotating fluid with the generalized Oldroyd-B model

In this paper, the generalized Oldroyd-B with fractional calculus approach is used. An exact solution in terms of Fox-H function for flow past an accelerated horizontal plate in a rotating fluid is obtained by using discrete Laplace transform method. A comparison among the influence of various parameters in the Oldroyd-B model and the angular velocity of the fluid on the velocity profiles is made through numerical method in graphic form.

Magneto-elastic dynamics and bifurcation of rotating annular plate

In this paper, magneto-elastic dynamic behavior, bifurcation, and chaos of a rotating annular thin plate with various boundary conditions are investigated. Based on the thin plate theory and the Maxwell equations, the magneto-elastic dynamic equations of rotating annular plate are derived by means of Hamilton＇s principle. Bessel function as a mode shape function and the Galerkin method are used to achieve the transverse vibration differential equation of the rotating annular plate with different boundary conditions. By numerical analysis, the bifurcation diagrams with magnetic induction, amplitude and frequency of transverse excitation force as the control parameters are respectively plotted under different boundary conditions such as clamped supported sides, simply supported sides, and clamped-one-side combined with simply-anotherside. Poincare′ maps, time history charts, power spectrum charts, and phase diagrams are obtained under certain conditions,and the influence of the bifurcation parameters on the bifurcation and chaos of the system is discussed. The results show that the motion of the system is a complicated and repeated process from multi-periodic motion to quasi-period motion to chaotic motion, which is accompanied by intermittent chaos, when the bifurcation parameters change. If the amplitude of transverse excitation force is bigger or magnetic induction intensity is smaller or boundary constraints level is lower, the system can be more prone to chaos.

3D analytical solution for a rotating transversely isotropic annular plate of functionally graded materials

The analytical solution for an annular plate rotating at a constant angular velocity is derived by means of direct displacement method from the elasticity equations for axisymmetric problems of functionally graded transversely isotropic media. The displacement components are assumed as a linear combination of certain explicit functions of the radial coordinate, with seven undetermined coefficients being functions of the axial coordinate z. Seven equations governing these z-dependent functions are derived and solved by a progressive integrating scheme. The present solution can be degenerated into the solution of a rotating isotropic functionally graded annular plate. The solution also can be degenerated into that for transversely isotropic or isotropic homogeneous materials. Finally, a special case is considered and the effect of the material gradient index on the elastic field is illustrated numerically.

Reducing residual distortion of thin-plate weldments by rotating extrusion

A new method named rotating extrusion was developed to mitigate residual distortion of thin-plate weldments. The basic principle and characteristic of rotating extrusion as well as an efficient rotating extrusion device were introduced. Systematic trials were conducted to investigate the influence of several technological parameters including the distance between the extrusion tool and welding torch, the pressure acting on weldment, the dimension of the extrusion tool and its rotational speed on distortion control effect. Experimental results show that, as for 2A12T4 aluminum alloy weldment with 2 mm in thickness, 150 mm in width and 350 mm in length, when appropriate technological parameters are adopted, rotating extrusion can reduce its buckling deflection to below 3% of the original value. Implementing rotating extrusion during welding with an extrusion tool more than 100 mm away from the welding torch may achieve better distortion mitigation effect.

Exact Solutions on MHD Flow Past an Accelerated Porous Plate in a Rotating Frame

We present an analysis of an electrically conducting viscous fluid over a porous plate in a rotating system.The plate starts impulsively from rest relative to the rotating fluid moving with uniform acceleration in its own plane.Exact solutions are developed for both large and small times.In addition,skin friction is computed.The variations of magnetic field and porosity are displayed and discussed.It is noted that steady state behavior is not achieved even under the simultaneous effects of suction,magnetic field and rotation.

Hall Current Effects on Unsteady MHD Flow in a Rotating Parallel Plate Channel Bound-ed by Porous Bed on the Lower Half—Darcy Lapwood Model

We discussed the unsteady flow of an incompressible viscous fluid in a rotating parallel plate channel bounded on one side by a porous bed under the influence of a uniform transverse magnetic field taking hall current into account. The perturbations are created by a constant pressure gradient along the plates in addition to the non-torsional oscillations of the upper plate. The flow in the clean fluid region is governed by Navier-Stoke’s equations while in the porous bed the equations are based on Darcy-Lapwood model. The exact solutions of velocity in the clean fluid and the porous medium consist of steady state and transient state. The time required for the transient state to decay is evaluated in detail and ultimate quasi-steady state solution has been derived analytically and also its behaviour is computationally discussed with reference to different flow parameters. The shear stresses on the boundaries and the mass flux are also obtained analytically and their behaviour is computationally discussed.

Role on Moment of Inertia and Vortex Dynamics for a Thin Rotating Plate

In this study, we focused on the lift generation with a thin rotating plate. The objective of this study is to understand the appropriate shape and the role of vortex for rotating thin plate. We determined the shape of the plate through free-flight tests of paper strips and investigated the aerodynamic characteristics of the rotating plate with the selected shape. The rectangular plate with an aspect ratio 7 was relevant from moment of inertia and bending stress. An endplate on a wing tip increased the stability on the lateral vortex structure behind the rotating plate. Velocity field measurement by Particle Image Velocimetry (PIV) showed that the lift force was generated twice in a rotating cycle.

Hall Effects on Unsteady MHD Three Dimensional Flow through a Porous Medium in a Rotating Parallel Plate Channel with Effect of Inclined Magnetic Field

In this paper, we make an initial value investigation of the unsteady flow of incompressible viscous fluid between two rigid non-conducting rotating parallel plates bounded by a porous medium under the influence of a uniform magnetic field of strength H0 inclined at an angle of inclination α with normal to the boundaries taking hall current into account. The perturbations are created by a constant pressure gradient along the plates in addition to the non-torsional oscillations of the upper plate while the lower plate is at rest. The flow in the porous medium is governed by the Brinkman’s equations. The exact solution of the velocity in the porous medium consists of steady state and transient state. The time required for the transient state to decay is evaluated in detail and the ultimate quasi-steady state solution has been derived analytically. Its behaviour is computationally discussed with reference to the various governing parameters. The shear stresses on the boundaries are also obtained analytically and their behaviour is computationally discussed.

APPLICATION AND FUNDAMENTAL RESEARCH OF ROTATING STREAM TRAY

ＡＰＰＬＩＣＡＴＩＯＮＡＮＤＦＵＮＤＡＭＥＮＴＡＬＲＥＳＥＡＲＣＨＯＦＲＯＴＡＴＩＮＧＳＴＲＥＡＭＴＲＡＹＴａｎＴｉａｎｅｎ；ＳｈｉＨｕｉｘｉａｎｇ；ＣｈｅｎＪｉａｎｍｅｎｇ；ＳｈｉＸｉａｏｒｏｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｃａｌＥｎｇｉｎ...

Combined distal tibial rotational osteotomy and proximal growth plate modulation for treatment of infantile Blount's disease

Infantile Blount's disease is a condition that causes genu varum and internal tibial torsion. Treatment options include observation, orthotics, corrective osteotomy, elevation of the medial tibial plateau, resection of a physeal bar, lateral hemi-epiphysiodesis, and guided growth of the proximal tibial physis. Each of these treatment options has its disadvantages. Treating the coronal deformity alone(genu varum) will result in persistence of the internal tibial torsion(the axial deformity). In this report, we describe the combination of lateral growth modulation and distal tibial external rotation osteotomy to correct all the elements of the disease. This has not been described before for treatment of Blount's disease. Both coronal and axial deformities were corrected in this patient. We propose this combination(rather than the lateral growth modulation alone) as the method of treatment for early stages of Blount's disease as it corrects both elements of the disease and in the same time avoids the complications of proximal tibial osteotomy.

Impulsively Started Horizontal Riga Plate Embedded in Unsteady Casson Fluid Flow with Rotation

This article is based on the impulsively started horizontal Riga plate in two dimensional unsteady Casson fluid flows with rotation. The plate starts abruptly from the rest relative to the rotating fluids moving with uniform acceleration in its plane. Numerical solutions are acquired by using explicit finite difference method and estimated results have been gained for various values of the Rotational parameter, modified Hartmann number, Prandtl number, Radiative parameter, Eckert number, Heat source parameter, Schmidt number, and the Soret number. Both the Compaq visual FORTRAN 6.6a and MATLAB R2015a tools have been used to find the numerical solutions and the graphical presentation. The Skin friction, Nusselt number and Sherwood number have been computed and the effects of some pertinent parameters on various distributions are discussed briefly and presented graphically.

Geochemistry and Geochronology of Circumferential Dykes of the Franklin LIP: A Rotated Perspective on Plate Reconstruction

In addition to an extrusive volcanic component and associated sills,the Neoproterozoic Franklin Large Igneous Province(LIP)comprises a giant radiating dyke swarm spanning an arc of ca.110?,as well as a less-

SIMULATION OF FABRIC DRAPE USING A THIN PLATE ELEMENT WITH FINITE ROTATION

The draping behavior of fabric is simulated by using four node quadrilateral thin plate elements with finite rotation. The finite element formulation is based on the total Lagrangian approach. An exact representation of finite rotation is introduced. The strain energy function accounting for the material symmetry is obtained by the tensor representation theory. To avoid shear locking, the assumed strain technique for transverse shear is adopted. The conjugate gradient method with a proposed line search algorithm is employed to minimize energy and reach the final shape of fabric. The draping behavior of a rectangular piece of fabric over a rectangular table is simulated. (Author abstract) 9 Refs.

Rotating Capacitor and a Transient Electric Network

This paper presents a rotating parallel-plate capacitor;one of the plates is assumed to turn about the common vertical axis through the centers of the square plates. Viewing the problem from a purely geometrical point of view, we evaluate the overlapping area of the plates as a function of the rotated angle. We then envision the rotation as being a mechanical continuous process. We consider two different rotation mechanisms: a uniform rotation with a constant angular velocity and, a rotation with a constant angular acceleration—we then evaluate the overlapping area as a continuous function of time. From the electrostatic point of view, the time-dependent overlapping area of the plates implies a time-dependent capacitor. Such a variable, a time-dependent capacitor has never been reported in literature. We insert this capacitor into a series with a resistor, forming a RC circuit. We analyze the characteristics of charging and discharging scenarios on two different parallel tracks. On the first track we drive the circuit with a DC power sup-ply. We study the implications of the rotation modes. We compare the response of each case to the corresponding tradi-tional constant capacitor of an equivalent RC circuit;the quantified results are intuitively just. On the second track, we drive the circuit with an AC source. Similar to the analysis of the first track, we generate the relevant electrical characteristics. In the latter case, we also analyze the sensitivity of the response of the circuit with respect to the fre-quency of the source. The analyses of the circuits encounter nontrivial differential equations. We utilize Mathematica [1] to solve these equations.

Rotating Squeezed Vacua as Time Machines

Squeezed quantum vacua seems to violate the averaged null energy conditions (ANEC’s), because they have a negative energy density. When treated as a perfect fluid, rapidly rotating Casimir plates will create vorticity in the vacuum bounded by them. The geometry resulting from an arbitrarily extended Casimir plates along their axis of rotation is similar to van Stockum spacetime. We observe closed timelike curves (CTC’s) forming in the exterior of the system resulting from frame dragging. The exterior geometry of this system is similar to Kerr geometry, but because of violation of ANEC, the Cauchy horizon lies outside the system unlike Kerr blackholes, giving more emphasis on whether spacetime is multiply connected at the microscopic level.

PFNA2 versus 95 Degree Condylar Blade Plate in the Management of Unstable Trochanteric Fractures

Purpose: The proximal femoral nail anti-rotation (PFNA) is known to have advantages in enhancing the anchorage ability of internal fixation in elderly unstable osteoporotic intertrochanteric fracture patients. However whether it is superior to condylar blade fixation is not clear. This study aimed to determine which treatment has better clinical outcomes in older patients. Materials and Methods: A total of 86 patients over the age of 60 with unstable trochanteric fractures within the past 3 weeks, were included in this prospective study conducted from June 1, 2018, to May 31, 2021. All the intertrochanteric fractures were classified according to AO/OTA classification. Among them, 44 cases were treated with the Proximal Femoral Nail (PFNA2) with or without an augmentation screw, and 42 cases were treated with the Condylar Blade Plate. In addition, the operative time, intraoperative blood loss, intraoperative and postoperative blood transfusion, postoperative weight-bearing time, hospitalization time, Harris score of hip function, Kyle’s criteria and postoperative complications were compared between the two groups. Results: The mean duration of surgery for the PFN group was 66.8 minutes (on average), whereas for the condylar blade plate group, it was 99.30 minutes (on average). The PFNA2 group experienced less blood loss (average of 80 mL) compared to the condylar blade plate group (average of 120 mL). Union and partial weight-bearing occurred earlier in the PFNA2 group (14.1 weeks and 10.6 weeks, respectively) compared to the Condylar blade plate group (18.7 weeks and 15.8 weeks). In two patients from the PFNA2 group, screw backing out and varus collapse complications were encountered;however, these patients remained asymptomatic and did not require revision surgery. In two other patients, screw cut out and breakage of the nail at the helical screw hole leading to non-union of the proximal femur were observed during the nine-month follow-up, necessitating revision surgery with prosthetic replacement. Among the condylar blade plate group, three patients experienced complications, including blade breakage at the blade and plate junction. In two cases, the fracture united in varus, and in one case, the blade cut through, resulting in non-union of the femoral head, which required revision surgery. According to the Harris hip score and Kyle’s criteria, a good-excellent outcome was observed in 92.85% of cases in the PFNA2 group and 90.90% of cases in the condylar blade plate group. Conclusion: Both the Proximal Femoral Nail A2 and Condylar blade plate are effective implants for the treatment of unstable trochanteric fractures. The intramedullary implant promotes biological healing and allows for early ambulation with minimal complications. Similarly satisfactory restoration of anatomy and favorable radiological and functional results can be achieved with the biological fixation provided by the 95-degree condylar blade plate. However, the use of PFNA2 internal fixation technique has the advantage of less trauma in elderly patients than the 95-degree condylar blade plate.

The Phototropism of Jurassic Petrified Wood in North China Plate

Trees on the side directly exposed to sunlight generally grow faster than on the opposite side, a phenomenon termed plant phototropism. There are in situ vertical trunks of silicified wood in the Xiadelongwan area of Yanqing County, north Beijing, where the first National Geologic Park of Petrified Wood of China has been built since 2002. A few trunks have well-preserved growth rings. One petrified stump from the formation shows a positive phototropism direction of SW230°. As compared with the modern normal growth stumps in Beijing plain area, which have a positive phototropism direction of SW210 °± 5°, the evidence of wood phototropism supports the conclusion of previous palaeomagnetic studies that the North China Plate has rotated clockwise since the Late Jurassic. The known petrified wood stumps in the Yanshan-Liaoning area are mainly found from the strata of 165-136 Ma, which corresponds to the main stage of the Yanshanian Movement.

Thermodynamic Consistency of Plate and Shell Mathematical Models in the Context of Classical and Non-Classical Continuum Mechanics and a Thermodynamically Consistent New Thermoelastic Formulation

Inclusion of dissipation and memory mechanisms, non-classical elasticity and thermal effects in the currently used plate/shell mathematical models require that we establish if these mathematical models can be derived using the conservation and balance laws of continuum mechanics in conjunction with the corresponding kinematic assumptions. This is referred to as thermodynamic consistency of the mathematical models. Thermodynamic consistency ensures thermodynamic equilibrium during the evolution of the deformation. When the mathematical models are thermodynamically consistent, the second law of thermodynamics facilitates consistent derivations of constitutive theories in the presence of dissipation and memory mechanisms. This is the main motivation for the work presented in this paper. In the currently used mathematical models for plates/shells based on the assumed kinematic relations, energy functional is constructed over the volume consisting of kinetic energy, strain energy and the potential energy of the loads. The Euler’s equations derived from the first variation of the energy functional for arbitrary length when set to zero yield the mathematical model(s) for the deforming plates/shells. Alternatively, principle of virtual work can also be used to derive the same mathematical model(s). For linear elastic reversible deformation physics with small deformation and small strain, these two approaches, based on energy functional and the principle of virtual work, yield the same mathematical models. These mathematical models hold for reversible mechanical deformation. In this paper, we examine whether the currently used plate/shell mathematical models with the corresponding kinematic assumptions can be derived using the conservation and balance laws of classical or non-classical continuum mechanics. The mathematical models based on Kirchhoff hypothesis (classical plate theory, CPT) and first order shear deformation theory (FSDT) that are representative of most mathematical models for plates/shells are investigated in this paper for their thermodynamic consistency. This is followed by the details of a general and higher order thermodynamically consistent plate/shell thermoelastic mathematical model that is free of a priori consideration of kinematic assumptions and remains valid for very thin as well as thick plates/shells with comprehensive nonlinear constitutive theories based on integrity. Model problem studies are presented for small deformation behavior of linear elastic plates in the absence of thermal effects and the results are compared with CPT and FSDT mathematical models.

The earth dynamic system: the earth rotation vs mantle convection

The earth dynamic system is one of the key scientific questions on the earth science. The thermodynamic behavior and gravity force of the earth and the rheology nature of the mantle prove that mantle convection is the main power source leading the lithosphere to break and move. Yet the directivity of both the structures in the crust and plate movement reminds of the earth rotation. Here we demonstrate that the mantle convection and inertia force of the earth rotation affect each other, the former being the power source of lithosphere plate break and motion, and the latter determining the direction of the mantle convection and plate motion. The sense of plate motion depends on the mantle upwells, whose trends are controlled by the earth rotation. The geometric shapes of the plate boundaries can adjust the direction of plate movement.