For virtually realizing the graphic realism display of DXF machine parts, in AutoCAD2007 graphic drawing environment, an interactive experimental method was taken to realize the display of graphic in DXF, which was ta...For virtually realizing the graphic realism display of DXF machine parts, in AutoCAD2007 graphic drawing environment, an interactive experimental method was taken to realize the display of graphic in DXF, which was taken as the data-exchanged interface and source. Based on depth analysis of DXF data structure, take one drawing of DXF lathe turning rotational part asthe test piece. By VC＋＋6.0 programming, part＇s geometry information could be obtained. Through data processing, 3D data of the test piece could be generated, which is based on 2D data of DXF test piece. Then, OpenGL graphic processing technologies （light, material, texture, map, et al.） were applied on the 3D display of test piece from DXF files or program modules. Finally based on the test report, results of the system functions were shared to prove the realization of system design, and the feasibility of algorithms used. In the developed software, Machine Designers could get a full view of machine parts, and do some proper modifications. The study content and results of our work have some theory and practical significance on the application of program design in the practical projects.展开更多
The axial piston pumps in aerospace applications are often characterized by high-speed rotation to achieve great power density. However, their internal rotating parts are fully immersed in the casing oil during operat...The axial piston pumps in aerospace applications are often characterized by high-speed rotation to achieve great power density. However, their internal rotating parts are fully immersed in the casing oil during operation, leading to considerable churning losses (more than 10% of total power losses) at high rotational speeds. The churning losses deserve much attention at the design stage of high-speed axial piston pumps, but accurate analytical models are not available to estimate the drag torque associated with the churning losses. In this paper, we derive the analytical expressions of the drag torque acting on the key rotating parts immersed in oil, including the cylinder block and the multiple pistons in a circular array. The calculated drag torque agrees well with the experimental data over a wide range of rotational speeds from 1500 to 12000 r/min. The presented analytical model provides practical guidelines for reducing the churning losses in high-speed axial piston pumps or motors.展开更多
文摘For virtually realizing the graphic realism display of DXF machine parts, in AutoCAD2007 graphic drawing environment, an interactive experimental method was taken to realize the display of graphic in DXF, which was taken as the data-exchanged interface and source. Based on depth analysis of DXF data structure, take one drawing of DXF lathe turning rotational part asthe test piece. By VC＋＋6.0 programming, part＇s geometry information could be obtained. Through data processing, 3D data of the test piece could be generated, which is based on 2D data of DXF test piece. Then, OpenGL graphic processing technologies （light, material, texture, map, et al.） were applied on the 3D display of test piece from DXF files or program modules. Finally based on the test report, results of the system functions were shared to prove the realization of system design, and the feasibility of algorithms used. In the developed software, Machine Designers could get a full view of machine parts, and do some proper modifications. The study content and results of our work have some theory and practical significance on the application of program design in the practical projects.
基金the National Key R&D Program of China(Grant No.2021YFB2011902)the National Natural Science Foundation of China(Grant No.52005323)+1 种基金the National Postdoctoral Program for Innovative Talents(Grant No.BX20200210)the China Postdoctoral Science Foundation(Grant No.2019M660086).
文摘The axial piston pumps in aerospace applications are often characterized by high-speed rotation to achieve great power density. However, their internal rotating parts are fully immersed in the casing oil during operation, leading to considerable churning losses (more than 10% of total power losses) at high rotational speeds. The churning losses deserve much attention at the design stage of high-speed axial piston pumps, but accurate analytical models are not available to estimate the drag torque associated with the churning losses. In this paper, we derive the analytical expressions of the drag torque acting on the key rotating parts immersed in oil, including the cylinder block and the multiple pistons in a circular array. The calculated drag torque agrees well with the experimental data over a wide range of rotational speeds from 1500 to 12000 r/min. The presented analytical model provides practical guidelines for reducing the churning losses in high-speed axial piston pumps or motors.
