MATCH-MODE METHOD AND ITS NUMERICAL SIMULATION FOR ROTOR-STATOR INTERACTION SOURCE MODES AND PROPAGATION MODES IN AN ANNULAR DUCT WITH MULTI-TREATMENTS

The suppressing design of the engine nacelle in an aircraft can benefit from the development of the prediction system for the sound fields in engine ducts which includes the prediction of the source generation and that of sound propagation in ducts. First, the acoustic match mode principle between the source modes of rotor stator interaction noise and the propagation modes is presented in this paper. Second, by utilizing this principle, the theoretical prediction method for rotor stator interaction noise generation and its propagation and attenuation in an annular duct with multi treatments is developed. That means that the prediction of sound propagation and attenuation in the segmented ducts might no longer completely depend on the in duct mode measurements, and the investigation on the sound propagation and attenuation in ducts can be accomplished not only by acoustic mode measurement, but also by making use of the source prediction to determine the source modes excited by rotor stator interaction. The effects of fan speed, blade/vane numbers, axial spacing between rotor and stator on the in duct sound attenuation and generated sound power level before and after ducts (also including the sound power level of blade passing frequency and its harmonics at the inlet of ducts) have been numerically calculated by using this prediction method. The reliability of this prediction method is verified by reasonable agreement between the predicted results with measured results in references. By analyzing the results of calculating cases, some reference criteria are provided for the engineering design of the suppressing engine nacelle.

Nonlinear dynamic behavior of rubbing rotor under interaction between bending and torsional vibrations

The nonlinear dynamic behavior of a rubbing rotor system was studied with a mathematical model established with the eccentricity and interaction between bending and torsional vibrations taken into consideration. The nonlinear vibrational response of a rubbing rotor was analyzed using numerical integral, spectroscopic analysis and Poince mapping method, which made it possible to have better understanding of the vibrational characteristics of partial rubbing and complete circular rubbing rotors. The numerical results reveal the response of torsional vibration mainly takes a form of superchronous motion, and its frequency decreases as the rotational speed increases when partial rubbing occurs, and the response of torsional vibration is synchronous when complete circular rubbing occurs. The comparison of the dynamics of rubbing rotors with and without the interaction between bending and torsional vibrations shows the interaction between bending and torsional vibrations advances the rotational speed, at which the response of bending vibration changes from a synchronous motion into a quasi periodic motion, and the interaction between bending and torsional vibrations reduces stability of the rubbing rotor.

Parametric Effect Investigation on Aerodynamic Interaction Characteristics for Tandem Rotors in Forward Flight

An iterative free-wake computational method is developed for the prediction of aerodynamic interaction characteristics between the twin rotors of a tandem helicopter.Here the mutual interaction effects between twin rotors are included,as well as those between the rotor and wake.A rotor wake model,blade aerodynamic model and rotor trim model are coupled during the process of solution.A new dual-rotor trim approach is presented to fit for the aerodynamic interaction calculations between tandem twin rotors.By the present method,the blade aerodynamic loads and rotor performance for the twin rotors under the interactional condition are calculated,and the comparisons with available experimental data are also made to indicate the capability of the proposed method.Then,the effects of such parameters as the longitudinal separation and axial separation between twin rotors on the aerodynamic interaction characteristics are analyzed.Based on the investigation,the conclusions are obtained to be of benefit to the configuration design of tandem rotors.Furthermore,the performance comparison between the tandem rotors and a single rotor is conducted.It is shown that the strongest interaction does not appear in a hover state,but in a low-speed forward flight state.

Effects of Number of Bleed Holes on Shock-Wave/Boundary-Layer Interactions in a Transonic Compressor Stator

An extensive numerical investigation is conducted to characterize the flow separation control in a transonic compressor cascade with a porous bleed.The bleed holes are arranged on the suction surface in a single row,two staggered rows and three staggered rows.For each bleed scheme,five bleed pressure ratios are examined at an inlet Mach number of 1.0.The results indicate that the aerodynamic performance of the cascade is significantly improved by the porous bleed.For the single-row scheme,the maximum reduction in total pressure losses is 57%.For the two-staggered-row and three-staggered-row schemes,there is an optimal bleed pressure ratio of 1.0,and the maximum reductions in total pressure loss are 68% and 75%,respectively.The low loss in the cascade is due to the well-controlled boundary layer.The new local supersonic region created by the bleed hole is the key reason for the improved boundary layer.The vortex induced by side bleeding provides another mechanism for delaying flow separation.Increasing the bleed holes could create multiple local supersonic regions,which reduce the range of the adverse pressure gradient that the boundary layer needs to withstand.This is the reason why cascades with more bleed holes perform better.

Visual study on the characteristics of liquid and droplet in a novel rotor-stator reactor

Rotor–stator reactor(RSR), an efficient mass transfer enhancer, has been applied in many fields. However,the hydrodynamic characteristics of liquid flow in RSR are still a mystery despite they are fundamental for the mass transfer performance and processing capacity. In view of the above, this paper studies the liquid–liquid flow and liquid holdup in RSR under various conditions with a high-speed camera. The paper firstly demonstrates two flow patterns and liquid holdup patterns that we obtained from our experiment and then presents in succession a flow pattern and a liquid holdup criterion for the transition of film flow to filament flow and complete filling to incomplete filling. It is found that experimental parameters, including rotor–stator distance, rotational speed and volume flow rate exert great influence on the average droplet diameter and size distribution. Besides, by comparison and contrast, we also find that the experimental values match well with our previous predicted calculations of the average diameter, and the relation between the average diameter and the mean energy dissipation rate.

Numerical simulation of unsteady interaction of centrifugal impeller with its diffuser using Lagrangian discrete vortex method

In this study, an advanced Lagrangian vortex- boundary element method is applied to simulate the unsteady impeller-diffuser interactions in a diffuser pump not only for design but also for off-design considerations. In velocity calculations based on the Biot-Savart law we do not have to grid large portions of the flow field and the calculation points are concentrated in the regions where vorticity is present. Lagrangian representation of the evolving vorticity field is well suited to moving boundaries. An integral pressure equation shows that the pressure distribution can be estimated directly from the instantaneous velocity and vorticity field. The numerical results are compared with the experimental data and the comparisons show that the method used in this study can provide us insight into the complicated unsteady impeller-diffuser interaction phenomena in a diffuser pump.

Parameter Modeling and Kinematical Simulation for Rotor and Stator of Screw Pump

The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stator. With the purpose of finding optimal parameters to improve the efficiency of screw pump design, the key technologies involved in the parametric modeling of rotor and stator were analyzed. The three-dimensional (3D) design software SolidWorks was used for the secondary development and parametric modeling of rotor and stator. After that the simulation models of different kinds of screw pumps were established based on the cycloid type, variation coefficient, and screw head number. Finally the COSMOSMotion was used to analyze the motion characteristics on the equidistant line of rotor, including velocity and acceleration. This design and modeling method has been used in screw pump enterprises for design and development, laying the foundation for finite element analysis and further optimization of screw pump.

GENERATOR VIBRATION FAULT DIAGNOSIS METHOD BASED ON ROTOR VIBRATION AND STATOR WINDING PARALLEL BRANCHES CIRCULATING CURRENT CHARACTERISTICS

Rotor vibration characteristics are first analyzed, which are that the rotor vibration of fundamental frequency will increase due to rotor winding inter-turn short circuit fault, air-gap dynamic eccentricity fault, or imbalance fault, and the vibration of the second frequency will increase when the air-gap static eccentricity fault occurs. Next, the characteristics of the stator winding parallel branches circulating current are analyzed, which are that the second harmonics circulating current will increase when the rotor winding inter-turn short circuit fault occurs, and the fundamental circulating current will increase when the air-gap eccentricity fault occurs, neither being strongly affected by the imbalance fault. Considering the differences of the rotor vibration and circulating current characteristics caused by different rotor faults, a method of generator vibration fault diagnosis, based on rotor vibration and circulating current characteristics, is developed. Finally, the rotor vibration and circulating current of a type SDF-9 generator is measured in the laboratory to verify the theoretical analysis presented above.

For Propulsion Applications It Is Possible to Utilize Both the Torque Output of the Rotor and the Reactional Torque Acting on the Stator of the Driving Electric Motor by Linearizing the Stator

This paper presents a novel idea of utilizing the reactional torque of the conventional electric motor as a linear output for propulsion in addition to the conventional torque output of the rotor. The idea is demonstrated by a theoretical proposal of linearizing the stator of one of the most used motors in Electrical Vehicles and Hybrid Vehicles. The proposed Linear Stator Motor is a simple modification without involving any functional change of the conventional motor. Though theoretical, the indicated possible input energy saving of more than 75% as compared to the conventional motor is no surprise, as by linearizing the stator, an almost equal linear propulsion output is added to the conventional rotor output. In addition to this remarkable saving in input energy, the proposed Linear Stator Motor that suits all types of vehicles, can maintain propulsion without the need for a mechanical transmission system. Also, in the case of watercraft and aircraft vehicles, no external mechanical propulsion drive system is required. It is just an internal force that can push the vehicle forward, backward, or laterally, while the conventional rotor output can be utilized for energy recovery by driving a DC generator.

INFLUENCES ON COUPLED LATERAL AND TORSION VIBRATION BEHAVIOR OF RUB-IMPACT ROTOR BY ROTOR-TO-STATOR CLEARANCE

With the establishment of the nonlinear coupled lateral and torsion vibrationequations of rub-impact Jeffcott rotor and through numerical simulations, the influences on lateraland torsion vibration behavior by rotor-to-stator clearance are analyzed, which prove that there isstrong impact on coupled lateral and torsion vibration behavior. Smaller the clearance is, morecomplex the motion of rotor is. When the clearance is larger, the frequency spectrum of rub-impactrotor is mainly composed of 1/2X, 1/3X and 1/4X components. With the decrease of clearance,quasi-periodic and chaotic motions will be present. Under different clearances, the bifurcationdiagrams of lateral and torsion vibrations can be divided into rub-free zone, rub-light zone andthree complex motion zones in which the motion trend of lateral vibration is similar to that of thetorsion vibration. Compared with the lateral vibration, the torsion vibration is of more motionforms and more abundant frequency components in amplitude spectrum.

Creation and Development of Turbo-generators with Water-Cooled Stator and Rotor Windings in Shanghai Electrical Machinery Mfg Works

1. An Overview of Manufacture and Operation A turbine generator utilizing a new technology of electrical machinery industry, i.e. the windings of its stator and rotor all being inner water-cooled, was first successfully created in China and was known afterwards as a turbine generator with watercooled stator and rotor windings (Abbrev, TGWSR). The teachers from Zhejiang University came to Shanghai between

无刷双馈电机研究综述与展望

无刷双馈电机具有结构可靠、变频器容量小等优势,非常适合灵活运行于防爆、易燃等特殊或极端工况,近年来受到广泛关注。该文根据无刷双馈电机的基本工作原理,明确了该类电机的命名原则与规范名称;总结了现有定转子方案的结构及性能特点,综合考虑性能指标与结构工艺,提出了转子双套绕组的发展方向;梳理了无刷双馈电机的稳态等效电路模型及基于各类数学模型的优化设计方法,针对现存难以完整考虑不同转速工况性能的不足,阐明了利用新型同步-异步相串联等效电路进行优化设计的思路;对比分析了经典及新近出现的无刷双馈电机控制系统拓扑和控制策略特点,面向典型电动、发电工况建立了完整的电机及控制系统。最后,对无刷双馈电机的上述理论研究问题及工业应用的发展方向进行了总结阐述,为该类电机的深入研究及加快推广应用提供参考和指导。

基于流固耦合的压气机转子叶片非同步振动分析

压气机转子叶片非同步振动是近年来发现的一类新气动弹性问题,表现为叶片振动频率与转频不同步且具有锁频现象,严重影响航空发动机的可靠性和运行安全,目前对其产生机理并不完全清楚.为了深入研究压气机内不稳定流动与叶片非同步振动之间的耦合机制,基于时间推进的方法建立了多级压气机转子叶片全环的双向流固耦合模型,数值研究了刚性叶片与非同步振动柔性叶片的非定常流场、气流激励频率和结构响应特征,揭示了压气机转子叶片非同步振动的流固耦合机制.结果表明:近失速工况下,转子叶尖吸力面径向分离涡的周期性脱落及再附过程是导致叶尖压力剧烈波动的主要原因,其3倍谐波激励频率与转子一阶弯曲固有频率接近,提供了叶片非同步振动的初始气流激励源.叶片非同步振动发生时,位移响应表现为等幅值的极限环特征,振动以一阶弯曲模态主导,径向分离涡产生的非整数倍气流激励频率及其谐波频率最终锁定为叶片一阶弯曲固有频率,非同步振动的运动胁迫使得相邻通道叶尖流场周向趋于一致.研究成果及对叶片非同步振动流固耦合机制的认识可为压气机内部不稳定流动诱发的叶片振动失效分析提供有益参考.

Flow Field Improvement by Bowed Stator Stages in a Compressor with Different Axial Gaps Under Near Stall Condition

The outlet flow fields of a low-speed repeating-stage compressor with bowed stator stages are measured with five-hole probe under the near stall condition when the rotor/stator axial gap varies. The performances of the straight stator stages are investigated and compared to those of the bowed stator stages. The results show that using bowed stator stages could alleviate the flow separation at both upper and low corners of the suction surface and the endwalls, and decrease the losses along the flow passage as well as the outlet flow angle. As the rotor/stator axial gap decreases, although the diffusion capacity of the compressor increases obviously, the outlet flow field in the straight stator stages deteriorates quickly. By contrast, little changes occur in the bowed stator stages, indicating that as the rotor/stator axial gap decreases, improved performance is achieved in the bowed stator stages.

Numerical Investigation of the Unsteady Flow in a Transonic Compressor with Curved Rotors

The unsteady 3D flow fields in a single-stage transonic compressor under designed conditions are simulated numerically to investigate the effects of the curved rotors on the stage performance and the aerodynamic interaction between the blade rows. The results show that, compared to the compressor with unurved rotors, the compressor under scrutiny acquires remarkable increases in efficiency with significantly reduced amplitudes of the time-dependent fluctuation. The amplitude of the pressure fluctuation around the stator leading edge decreases at both endwalls, but increases at the mid-span in the curved rotors. The pressure fluctuation near the stator leading edge, therefore, becomes more uniform in the radial direction of this compressor. Except for the leading edge area, the pressure fluctuatinn amplitude declines remarkably in the tip region of stator surface downstream of the curved rotor, but hardly changes in the middle and at the hub.

新型双定子无刷双馈风力发电机直接功率控制

新型双定子无刷双馈发电机包括内外功率绕组和内外控制绕组,二者分别通过中间带隔磁环的背靠背笼障转子进行磁场耦合。针对该新型双定子无刷双馈风力发电机提出一种直接功率控制方法,内外功率绕组及内外控制绕组分别串联以保持各自同相绕组的电磁一致性,将功率绕组有功和无功功率滞环比较器输出值及控制绕组磁链扇区号综合,采用查找表得到控制绕组机侧变流器所需输出的电压空间矢量。通过定量对比研究12/8极50 kW样机控制系统阶跃信号作用下的特性仿真与实验结果,验证了所提双定子无刷双馈风力发电机直接功率控制在亚同步~超同步速度变化范围内变速恒频发电、最大功率跟踪、无功功率与单位功率因数控制等方面的正确性、可行性和有效性。

汽轮发电机转子匝间短路对定子热响应特性的影响

本文分析了汽轮发电机转子匝间短路故障前后定子热响应特性,不仅考虑转子匝间短路引起电压下降对发电机强励动作的影响,还研究了热分布不平衡而引起的定子力学响应。首先推导了正常情况和转子匝间短路故障后加强励磁电流下的气隙磁通密度,得到了铁心损耗和绕组铜耗的解析表达式;然后建立了发电机故障前后的三维有限元仿真模型,对不同短路程度故障下的铁心损耗、绕组铜耗与定子温度进行了求解计算;最后实测了CS-5型故障模拟发电机在正常运行和不同短路程度故障下的定子温度,实验结果与理论分析、有限元仿真结果基本一致。结果表明,转子匝间短路故障后由于励磁电流的增强,发电机铁心损耗和绕组铜耗均会增加,定子温度明显上升,并且随着短路程度的增加而加剧;定子端面边缘位置的变形和应力幅值最大并且为热响应下的危险位置。

考虑表面粗糙度影响的低温涡轮泵特性与动静间隙流动分析

为分析低温涡轮泵过流部件表面粗糙度对其性能特性的影响,阐明表面粗糙度对涡轮泵动静间隙流场的影响机制,选择增材制造闭式叶轮涡轮氧泵为研究对象,在考虑低温介质热力学效应影响的前提下,采用液氮作为增压输送介质,对涡轮泵低温性能开展实验测试和数值计算。研究结果表明:在13 500~26 000 r/min转速范围内,相较于光滑壁面,考虑过流部件表面粗糙度后,采用液氮作为模拟介质得到的涡轮氧泵数值计算结果与实验测试数据吻合较好;随着离心叶轮及蜗壳等主流表面粗糙度从光滑壁面增加至36μm,涡轮氧泵扬程及效率分别下降了9.1%、10.6%;随着动静间隙过流部件表面粗糙度从0增加至20μm,涡轮泵叶轮轴向力合力系数显著降低了25.8%。研究结果对后续深入揭示表面粗糙度对低温涡轮泵动静间隙流场特性影响规律以及过流部件表面质量分区控制具有重要借鉴意义及参考价值。

基于Doehlert Matrix的全贯流泵装置定转子进出流间隙优化设计

全贯流泵是一种新型的机电-水泵一体式贯流泵,然而其在运行时存在定转子间隙回流,扰乱了叶轮内的流场分布,导致泵装置产生能量损失、压力波动和噪声等问题,影响泵站的正常运行。通过数值模拟和模型试验研究全贯流泵装置定转子间隙流的水力特性,结合Doehlert Matrix设计-响应面优化法对其定转子进、出流间隙结构进行优化设计,揭示全贯流泵装置定转子进、出流间隙结构对泵装置性能的影响机理,并得到最终优化的折角式定转子进、出流间隙结构方案为:外侧延伸段长度t1为4.921r,外侧收缩段长度x1为0.624r,内侧延伸段长度t2为3.655r,内侧收缩段长度x2为1.6r(r为定转子间隙宽度),使得全贯流泵装置扬程和效率分别提升约10.3%和5.2%。

燃气轮机透平转静盘腔内流动与传热研究进展

转静系盘腔是燃气轮机二次空气系统中的重要组成部分,盘腔内流动和传热特性对整机安全稳定运行十分重要。随着燃气透平进口温度的不断提升,对透平冷却设计的要求不断提高,透平盘腔流动换热特性研究也越来越受关注。研究人员从流动与换热两个方面对转静系盘腔进行实验测量和数值模拟研究,形成相对比较成熟的研究体系。总结近年来燃气透平转静盘腔流动传热及冷却的相关研究进展,根据结构的不同分别对中心进气和预旋进气转静系盘腔及转静系盘腔的轮缘密封进行介绍,分析3种不同盘腔结构内部流动型态,介绍了预旋系统结构和轮缘密封结构对盘腔内流动传热特性影响的相关实验与数值研究现状。最后,基于当前研究热点和发展趋势,总结并展望了转静系盘腔未来研究的发展方向。