Enhancing Network Design through Statistical Evaluation of MANET Routing Protocols

This paper contributes a sophisticated statistical method for the assessment of performance in routing protocols salient Mobile Ad Hoc Network(MANET)routing protocols:Destination Sequenced Distance Vector(DSDV),Ad hoc On-Demand Distance Vector(AODV),Dynamic Source Routing(DSR),and Zone Routing Protocol(ZRP).In this paper,the evaluation will be carried out using complete sets of statistical tests such as Kruskal-Wallis,Mann-Whitney,and Friedman.It articulates a systematic evaluation of how the performance of the previous protocols varies with the number of nodes and the mobility patterns.The study is premised upon the Quality of Service(QoS)metrics of throughput,packet delivery ratio,and end-to-end delay to gain an adequate understanding of the operational efficiency of each protocol under different network scenarios.The findings explained significant differences in the performance of different routing protocols;as a result,decisions for the selection and optimization of routing protocols can be taken effectively according to different network requirements.This paper is a step forward in the general understanding of the routing dynamics of MANETs and contributes significantly to the strategic deployment of robust and efficient network infrastructures.

Coati Optimization-Based Energy Efficient Routing Protocol for Unmanned Aerial Vehicle Communication

With the flexible deployment and high mobility of Unmanned Aerial Vehicles(UAVs)in an open environment,they have generated con-siderable attention in military and civil applications intending to enable ubiquitous connectivity and foster agile communications.The difficulty stems from features other than mobile ad-hoc network(MANET),namely aerial mobility in three-dimensional space and often changing topology.In the UAV network,a single node serves as a forwarding,transmitting,and receiving node at the same time.Typically,the communication path is multi-hop,and routing significantly affects the network’s performance.A lot of effort should be invested in performance analysis for selecting the optimum routing system.With this motivation,this study modelled a new Coati Optimization Algorithm-based Energy-Efficient Routing Process for Unmanned Aerial Vehicle Communication(COAER-UAVC)technique.The presented COAER-UAVC technique establishes effective routes for communication between the UAVs.It is primarily based on the coati characteristics in nature:if attacking and hunting iguanas and escaping from predators.Besides,the presented COAER-UAVC technique concentrates on the design of fitness functions to minimize energy utilization and communication delay.A varied group of simulations was performed to depict the optimum performance of the COAER-UAVC system.The experimental results verified that the COAER-UAVC technique had assured improved performance over other approaches.

Fast and scalable routing protocols for data center networks

Data center networks may comprise tens or hundreds of thousands of nodes,and,naturally,suffer from frequent software and hardware failures as well as link congestions.Packets are routed along the shortest paths with sufficient resources to facilitate efficient network utilization and minimize delays.In such dynamic networks,links frequently fail or get congested,making the recalculation of the shortest paths a computationally intensive problem.Various routing protocols were proposed to overcome this problem by focusing on network utilization rather than speed.Surprisingly,the design of fast shortest-path algorithms for data centers was largely neglected,though they are universal components of routing protocols.Moreover,parallelization techniques were mostly deployed for random network topologies,and not for regular topologies that are often found in data centers.The aim of this paper is to improve scalability and reduce the time required for the shortest-path calculation in data center networks by parallelization on general-purpose hardware.We propose a novel algorithm that parallelizes edge relaxations as a faster and more scalable solution for popular data center topologies.

Dynamic channel estimation-aware routing protocol in mobile cognitive radio networks for smart IIoT applications

Cognitive Radio Networks(CRNs)have become a successful platform in recent years for a diverse range of future systems,in particularly,industrial internet of things(IIoT)applications.In order to provide an efficient connection among IIoT devices,CRNs enhance spectrum utilization by using licensed spectrum.However,the routing protocol in these networks is considered one of the main problems due to node mobility and time-variant channel selection.Specifically,the channel selection for routing protocol is indispensable in CRNs to provide an adequate adaptation to the Primary User(PU)activity and create a robust routing path.This study aims to construct a robust routing path by minimizing PU interference and routing delay to maximize throughput within the IIoT domain.Thus,a generic routing framework from a cross-layer perspective is investigated that intends to share the information resources by exploiting a recently proposed method,namely,Channel Availability Probability.Moreover,a novel cross-layer-oriented routing protocol is proposed by using a time-variant channel estimation technique.This protocol combines lower layer(Physical layer and Data Link layer)sensing that is derived from the channel estimation model.Also,it periodically updates and stores the routing table for optimal route decision-making.Moreover,in order to achieve higher throughput and lower delay,a new routing metric is presented.To evaluate the performance of the proposed protocol,network simulations have been conducted and also compared to the widely used routing protocols,as a benchmark.The simulation results of different routing scenarios demonstrate that our proposed solution outperforms the existing protocols in terms of the standard network performance metrics involving packet delivery ratio(with an improved margin of around 5–20%approximately)under varying numbers of PUs and cognitive users in Mobile Cognitive Radio Networks(MCRNs).Moreover,the cross-layer routing protocol successfully achieves high routing performance in finding a robust route,selecting the high channel stability,and reducing the probability of PU interference for continued communication.

Optimized Tuning of LOADng Routing Protocol Parameters for IoT

Interconnected devices and intelligent applications have slashed human intervention in the Internet of Things(IoT),making it possible to accomplish tasks with less human interaction.However,it faces many problems,including lower capacity links,energy utilization,enhancement of resources and limited resources due to its openness,heterogeneity,limited resources and extensiveness.It is challenging to route packets in such a constrained environment.In an IoT network constrained by limited resources,minimal routing control overhead is required without packet loss.Such constrained environments can be improved through the optimal routing protocol.It is challenging to route packets in such a constrained environment.Thus,this work is motivated to present an efficient routing protocol for enhancing the lifetime of the IoT network.Lightweight On-demand Ad hoc Distance-vector Routing Protocol—Next Generation(LOADng)protocol is an extended version of the Ad Hoc On-Demand Distance Vector(AODV)protocol.Unlike AODV,LOADng is a lighter version that forbids the intermediate nodes on the route to send a route reply(RREP)for the route request(RREQ),which originated from the source.A resource-constrained IoT network demands minimal routing control overhead and faster packet delivery.So,in this paper,the parameters of the LOADng routing protocol are optimized using the black widow optimization(BWO)algorithm to reduce the control overhead and delay.Furthermore,the performance of the proposed model is analyzed with the default LOADng in terms of delay,delivery ratio and overhead.Obtained results show that the LOADng-BWO protocol outperforms the conventional LOADng protocol.

High efficiency AODV routing protocol based on link availability prediction in MANETs

To cope with the problem of low protocol efficiency of the standard ad hoc on-demand distance vector （AODV） routing protocol with the periodic Hello message broadcast mechanism, a new link availability prediction based strategy is introduced to reduce the amount of Hello messages. In this strategy, a novel wireless link availability prediction model under line-of-sight （LOS） propagation environments is proposed based on which the parameter of Hello Interval in AODV can be dynamically adjusted to achieve the goal of changing the frequency of Hello message broadcasts under different link stability degrees. Simulation results demonstrate that, compared with the standard AODV with the periodic Hello message broadcast mechanism, the proposed protocol effectively reduces unnecessary control message overhead and greatly improves the performance in terms of end-to-end delay and efficiency.

Secure and Reliable Routing in the Internet of Vehicles Network:AODV-RL with BHA Attack Defense

Wireless technology is transforming the future of transportation through the development of the Internet of Vehicles(IoV).However,intricate security challenges are intertwinedwith technological progress:Vehicular ad hoc Networks(VANETs),a core component of IoV,face security issues,particularly the Black Hole Attack(BHA).This malicious attack disrupts the seamless flow of data and threatens the network’s overall reliability;also,BHA strategically disrupts communication pathways by dropping data packets from legitimate nodes altogether.Recognizing the importance of this challenge,we have introduced a new solution called ad hoc On-Demand Distance Vector-Reputation-based mechanism Local Outlier Factor(AODV-RL).The significance of AODVRL lies in its unique approach:it verifies and confirms the trustworthiness of network components,providing robust protection against BHA.An additional safety layer is established by implementing the Local Outlier Factor(LOF),which detects and addresses abnormal network behaviors.Rigorous testing of our solution has revealed its remarkable ability to enhance communication in VANETs.Specifically,Our experimental results achieve message delivery ratios of up to 94.25%andminimal packet loss ratios of just 0.297%.Based on our experimental results,the proposedmechanismsignificantly improves VANET communication reliability and security.These results promise a more secure and dependable future for IoV,capable of transforming transportation safety and efficiency.

SLEACH: Secure Low-Energy Adaptive Clustering Hierarchy Protocol for Wireless Sensor Networks

LEACH (Low-Encrgy Adaptive Clustering Hi-erarchy) protocol is a basic clustering-based routing protocol of sensor networks. In this paper, we present the design of SLEACH, asecure extension for the LEACH protocol. We divide SLEACH into four phases and fit inexpensivecryplp-graphic operations to each part of the protocol functionality to create an efficient,practical protocol. Then we give security analyses of SLEACH. Our security analyses show that ourschemeis robust against any external attacker or compromised nodes in the sensor network.

G-MER： Green Mobility Estimation- Based Routing Protocol in Wireless Sensor Network

As a core technology of Intemet of Things （loT）, Wireless Sensor Network （WSN） has become a research hotspot recently. More and more WSNs are being deployed in highly mobile environments. The fast moving sensor nodes bring significant challenges for the routing decision. In this paper, we propose an efficient logical location method, and designe a mobility estimating metric and derive a novel Green Mobility Estirmtion- based Routing protocol （G-MER） for WSNs. We also set up a full framework to evaluate its per- formance. Simulation results illustrate that G-MER achieves a fairly better perforrmnce in terrm of broadcast times and link failures than AODV. What＇s more, it decreases the mean hops by about 0.25 and reduces energy consumption by about 10% during the whole experiment. All the results show that G-MER can be effectively used in fast- moving and limited resource scenarios.

An Energy Based Dynamic AODV Routing Protocol in Wireless Ad Hoc Networks

In recent years,with the rapid development of the Internet and wireless communication technology,wireless Ad hoc networks have received more attention.Due to the limited transmission range and energy of nodes in Ad hoc networks,it is important to establish a reliable and energy-balanced transmission path in Ad hoc networks.This paper proposes an energy-based dynamic routing protocol based on the existing AODV routing protocol,which has the following two aspects of improvement:(1)In the route discovery process,a node selects a suitable route from the minimum energy consumption route and the energy-balanced route designed in this paper according to a“Mark”bit that representing remaining energy of a node.(2)Based on(1),a route interruption update strategy was proposed to restart the route discovery process when node energy was used excessively.Simulation results demonstrate that compared with AODV and other existing routing protocols,proposed algorithm can reduce network energy consumption and balance node energy,thus extending the network lifetime.

ECO-BAT: A New Routing Protocol for Energy Consumption Optimization Based on BAT Algorithm in WSN

Wireless sensor network (WSN) has been widely used due to its vastrange of applications. The energy problem is one of the important problems influencingthe complete application. Sensor nodes use very small batteries as a powersource and replacing them is not an easy task. With this restriction, the sensornodes must conserve their energy and extend the network lifetime as long as possible.Also, these limits motivate much of the research to suggest solutions in alllayers of the protocol stack to save energy. So, energy management efficiencybecomes a key requirement in WSN design. The efficiency of these networks ishighly dependent on routing protocols directly affecting the network lifetime.Clustering is one of the most popular techniques preferred in routing operations.In this work we propose a novel energy-efficient protocol for WSN based on a batalgorithm called ECO-BAT (Energy Consumption Optimization with BAT algorithmfor WSN) to prolong the network lifetime. We use an objective function thatgenerates an optimal number of sensor clusters with cluster heads (CH) to minimizeenergy consumption. The performance of the proposed approach is comparedwith Low-Energy Adaptive Clustering Hierarchy (LEACH) and EnergyEfficient cluster formation in wireless sensor networks based on the Multi-Objective Bat algorithm (EEMOB) protocols. The results obtained are interestingin terms of energy-saving and prolongation of the network lifetime.

Joint channel assignment and cross-layer routing protocol for multi-radio multi-channel Ad Hoc networks

To study multi-radio multi-channel （MR-MC） Ad Hoc networks based on 802.11, an efficient cross-layer routing protocol with the function of joint channel assignment, called joint channel assignment and cross-layer routing （JCACR）, is presented. Firstly, this paper introduces a new concept called channel utilization percentage （CUP）, which is for measuring the contention level of different channels in a node’s neighborhood, and deduces its optimal value for determining whether a channel is overloaded or not. Then, a metric parameter named channel selection metric （CSM） is designed, which actually reffects not only the channel status but also corresponding node’s capacity to seize it. JCACR evaluates channel assignment by CSM, performs a local optimization by assigning each node a channel with the smaller CSM value, and changes the working channel dynamically when the channel is overloaded. Therefore, the network load balancing can be achieved. In addition, simulation shows that, when compared with the protocol of weighted cumulative expected transfer time （WCETT）, the new protocol can improve the network throughput and reduce the end-to-end average delay with fewer overheads.

Routing Protocols for Transmitting Large Databases or Multi databases Systems

Most knowledgeable people agree that networking and routing technologies have been around about 25 years. Routing is simultaneously the most complicated function of a network and the most important. It is of the same kind that more than 70% of computer application fields are MIS applications. So the challenge in building and using a MIS in the network is developing the means to find, access, and communicate large databases or multi databases systems. Because general databases are not time continuous, in fact, they can not be streaming, so we can't obtain reliable and secure quality of service by deleting some unimportant datagrams in the databases transmission. In this article, we will discuss which kind of routing protocol is the best type for large databases or multi databases systems transmission in the networks.

Tree-Based Proactive Routing Protocol for Wireless Mesh Network

Wireless Mesh Network （WMN） is seen as an effective Intemet access solution for dynamic wireless applications. For the low mobility of mesh routers in WMN, the backbone topography can be effectively maintained by proactive routing protocol. Pre-proposals like Tree Based Routing （TBR） protocol and Root Driven Routing （RDR） protocol are so centralized that they make the gateway becorre a bottleneck which severely restricts the network performance. We proposed an Optimized Tree-based Routing （OTR） protocol that logically separated the proactive tree into pieces. Route is partly computed by the branches instead of root. We also discussed the operation of multipie Intemet gateways which is a main issue in WMN. The new proposal lightens the load in root, reduces the overhead and improves the throughput. Numerical analysis and simulation results confirm that the perforrmnce of WMN is improved and OTR is more suitable for large scale WMN.

Trust management-based and energy efficient hierarchical routing protocol in wireless sensor networks

The single planar routing protocol has a slow convergence rate in the large-scale Wireless Sensor Network(WSN).Although the hierarchical routing protocol can effectively cope with large-scale application scenarios,how to elect a secure cluster head and balance the network load becomes an enormous challenge.In this paper,a Trust Management-based and Low Energy Adaptive Clustering Hierarchy protocol(LEACH-TM)is proposed.In LEACH-TM,by using the number of dynamic decision cluster head nodes,residual energy and density of neighbor nodes,the size of the cluster can be better constrained to improve energy efficiency,and avoid excessive energy consumption of a node.Simultaneously,the trust management scheme is introduced into LEACH-TM to defend against internal attacks.The simulation results show that,compared with LEACH-SWDN protocol and LEACH protocol,LEACH-TM outperforms in prolonging the network lifetime and balancing the energy consumption,and can effectively mitigate the influence of malicious nodes on cluster head selection,which can greatiy guarantee the security of the overall network.

Enhancement in Ad hoc on Demand Distance Vector (AODV) Routing Protocol Security

Ad-hoc networking has mainly been associated with military battlefield networks. Security has received considerably less attention and the issue needs to be addressed before any successful applications will appear. Due to the insecure nature of the wireless link and their dynamically changing topology, wireless ad-hoc networks require a careful and security-oriented approach for designing routing protocols. In this paper, an AODV-based secure routing protocol- ENAODV is presented. A speed-optimized digital signature algorithm is integrated into the routing protocol. The protocol algorithm is implemented with NS-2. The security of the protocol is analyzed. The simulating results show that the performances of ENAODV protocol, such as average node energy consumption, packet delay and packet delivery is nearly the same as standard AODV protocol.

A reliable and high throughput hybrid routing protocol for vehicular ad-hoc network

Due to highly dynamic topology caused by fast moving nodes the Vehicular ad-hoc network (VANET) results in the existence of transient communication links, which degrade the performance of developed protocols. Established routes frequently become stale, and existing communication flows are interrupted, incurring delay and additional overhead. In this paper we propose a novel hybrid routing protocol, which is the combined between of the table-driven routing and on-demand routing in VANET. It makes fast convergence in routing process, minimal drop links, making more reliable links, and adaptive with changing of VANET topology. With neighbor table is updated instantaneously, and using strong neighbor for routing process makes route discovery process start whenever it received requirement, and through using route mechanism appropriately it reduces significantly route overhead at each node. The simulation results illustrate the outstanding properties of our proposed routing protocol.

An energy efficiency clustering routing protocol for WSNs in confined area

Wireless sensor networks (WSNs) are important application for safety monitoring in underground coal mines, which are difficult to monitor due to natural conditions. Based on the characteristic of limited energy for WSNs in confined underground area such as coal face and laneway, we presents an energy- efficient clustering routing protocol based on weight (ECRPW) to prolong the lifetime of networks. ECRPW takes into consideration the nodes' residual energy during the election process of cluster heads. The constraint of distance threshold is used to optimize cluster scheme. Furthermore, the protocol also sets up a routing tree based on cluster heads' weight. The results show that ECRPW had better perfor- mance in energy consumption, death ratio of node and network lifetime.

Component based ant routing protocols analysis over mobile ad hoc networks

To deeply exploit the mechanisms of ant colony optimization （ACO） applied to develop routing in mobile ad hoe networks （MANETS）,some existing representative ant colony routing protocols were analyzed and compared.The analysis results show that every routing protocol has its own characteristics and competitive environment.No routing protocol is better than others in all aspects.Therefore,based on no free lunch theory,ant routing protocols were decomposed into three key components：route discovery,route maintenance （including route refreshing and route failure handling） and data forwarding.Moreover,component based ant routing protocol （CBAR） was proposed.For purpose of analysis,it only maintained basic ant routing process,and it was simple and efficient with a low overhead.Subsequently,different mechanisms used in every component and their effect on performance were analyzed and tested by simulations.Finally,future research strategies and trends were also summarized.

Distributed QoS multicast routing protocol in ad hoc networks

Quality of service （QoS） routing and multicasting protocols in ad hoc networks are face with the challenge of delivering data to destinations through multihop routes in the presence of node movements and topology changes. The multicast routing problem with multiple QoS constraints is discussed, which may deal with the delay, bandwidth and cost metrics, and describes a network model for researching the ad hoc networks QoS multicast routing problem. It presents a distributed QoS multicast routing protocol （DQMRP）. The proof of correctness and complenty analysis of the DQMRP are also given. Simulation results show that the multicast tree optimized by DQMRP is better than other protocols and is fitter for the network situations with frequently changed status and the realtime multimedia application. It is an available approach to multicast routing decision with multiple QoS constraints.