Blade rubbing faults cause detrimental impact on the operation of aeroengines. Most of the existing studies on blade rubbing in the shaft-disk-blade-casing(SDBC) system have overlooked the elastic deformation of the b...Blade rubbing faults cause detrimental impact on the operation of aeroengines. Most of the existing studies on blade rubbing in the shaft-disk-blade-casing(SDBC) system have overlooked the elastic deformation of the blade, while some only consider the whirl of the rotor, neglecting its spin. To address these limitations, this paper proposes a dynamic model with large rotation for the SDBC system. The model incorporates the spin and whirl of the rotor, enabling the realistic reproduction of multiblade rubbing faults. To verify the accuracy of the SDBC model with large rotation and demonstrate its capability to effectively consider the rotational effects such as the centrifugal stiffening and gyroscopic effects, the natural characteristics and dynamic responses of the proposed model are compared with those obtained from reported research and experimental results. Furthermore, the effects of the rotating speed, contact stiffness,and blade number on the dynamic characteristics of the SDBC system with multi-blade rubbing are investigated. The results indicate that the phase angle between the rotor deflection and the unbalance excitation force increases with the increasing rotating speed,which significantly influences the rubbing penetration of each blade. The natural frequency of the SDBC system with rubbing constrain can be observed in the acceleration response of the casing and the torsional response of the shaft, and the frequency is related to the contact stiffness. Moreover, the vibration amplitude increases significantly with the product of the blade number under rubbing, and the rotating frequency approaches the natural frequency of the SDBC system. The proposed model can provide valuable insight for the fault diagnosis of rubbing in bladed rotating machinery.展开更多
The development of a durable metallic coating on diverse substrates is both intriguing and challenging,particularly in the research of metal-conductive materials for applications such as batteries,soft electronics,and...The development of a durable metallic coating on diverse substrates is both intriguing and challenging,particularly in the research of metal-conductive materials for applications such as batteries,soft electronics,and beyond.Herein,by learning from the pencil-writing process,a facile solid-ink rubbing technology(SIR-tech)is invented to address the above challenge.The solid-ink is exampled by rational combination of liquid metal and graphite particles.By harnessing the synergistic effects between rubbing and adhesion,controllable metallic skin is successfully formed onto metals,woods,ceramics,and plastics without limitation in size and shape.Moreover,outperforming pure liquid-metal coating,the composite metallic skin by SIR-tech is very robust due to the self-lamination of graphite nanoplate exfoliated by liquid-metal rubbing.The critical factors controlling the structures-properties of the composite metallic skin have been systematically investigated as well.For applications,the SIR-tech is demonstrated to fabricate high-performance composite current collectors for next-generation batteries without traditional metal foils.Meanwhile,advanced skin-electrodes are further demonstrated for stable triboelectricity generation even under temperature fluctuation from-196 to 120℃.This facile and highly-flexible SIR-tech may work as a powerful platform for the studies on functional coatings by liquid metals and beyond.展开更多
Objectives: The study aimed to determine the most appropriate hearing screening test to identify disabling hearing loss for adults aged 65 years or older.Methods: This study included 577 older adults. Four hearing scr...Objectives: The study aimed to determine the most appropriate hearing screening test to identify disabling hearing loss for adults aged 65 years or older.Methods: This study included 577 older adults. Four hearing screening tests were considered in the study, including the Hearing Handicap Inventory for Elderly Screening(HHIE-s), three single question tests, the whisper test, and the finger rub test. The sensitivity and specificity of these tests referenced to the hearing threshold of disabling hearing loss were estimated.Results: Among all tests, only the single self-perception question(0.7064 for sensitivity;0.7225 for specificity) and whisper test(0.7833 for sensitivity;0.7708 for specificity) could obtain both sensitivity and specificity higher than 70% for adults aged ≥65 years.Conclusion: Overall, we suggest using the whisper test to identify disabling hearing loss(>40 dB HL at the better ear) for adults aged 65 years or older. However, if the conditions do not permit, the single selfperception question is also acceptable. Moreover, HHIE-s might not be a good test to detect disabling hearing loss for adults aged 80 years or older.展开更多
It*ss very important to identify the load on rotor bearing system. Based on load identification in time domain, a new method combined with transfer matrix method is applied in rubbing rotor bearing system to estimat...It*ss very important to identify the load on rotor bearing system. Based on load identification in time domain, a new method combined with transfer matrix method is applied in rubbing rotor bearing system to estimate the force on rubbing rotor for the first time. Avoiding calculating the modal parameters, the outside excitation force on multi point and the distribute of internal forces on rubbing rotor bearing system can be identified by this way at the same time. Finally, the simulation is made on partial lateral rubbing rotor bearing system. For the faulty of rotor/stator rub, the point where rubbing occurs and the change of impact forces can be detected by this method in order to improve the accuracy of rotor/stator rub faulty diagnosis.展开更多
According to the background of the rub impact faults of aerial engines and industrial turbines, two kinds of test rigs, on the base of the dynamics model, are established to study the rub impact faults between rotor...According to the background of the rub impact faults of aerial engines and industrial turbines, two kinds of test rigs, on the base of the dynamics model, are established to study the rub impact faults between rotor and stator with free supports. The orbit of the vibration of rotor displacement is respectively examined on the four impact conditions, which are the normal state with no impact, the early sharp impact statement, the semi sharp impact statement and the terminal blunt impact statement. The route to chaos, appearing with the early sharp impact, is observed for the first time. By analyzing the frequency domain characteristics of the experimental data on four impact conditions, it is testified that the appearance of the sub harmonic vibrations of the order 1/3 and 1/4 is the effective evidence to judge whether or not the blade has initial light rub impact. When there are only the harmonic vibrations of the order of 1/1 and 1/2, the blade stator rub impact faults have become very serious.展开更多
The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The result...The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The results show that the addition of La to RuB amorphous alloy catalyst can evidently increase the activity and improve the thermal stability of RuB amorphous alloy to refrain its crystallization. The promoting effect of La on the activity of RuB amorphous alloy catalyst is because of the high dispersion of the active components.展开更多
Keratoconus is a non-inflammatory disorder which is gradual in development;corneal thinning and ectatic protrusion characterizes it. Keratoconus prevalence varies between different regions depending on several factors...Keratoconus is a non-inflammatory disorder which is gradual in development;corneal thinning and ectatic protrusion characterizes it. Keratoconus prevalence varies between different regions depending on several factors that affecting its prevalence. There are risk factors for developing keratoconus such as demographic and environmental factors. It was suggested that eye rubbing was associated with the development of keratoconus. The main aim of this review was to summarize the literature data about keratoconus and to identify the role of eyerubbing in the aetiology of the disease. A number of 24 articles was reviewed through the Pub Med, Google Scholar and Research Gates. There are many keywords used such as keratoconus, aetiology of keratoconus, eye rubbing, keratoconus prevalence, keratoconus and eye rubbing correlation. We concluded that eye rubbing causes the thinning of keratocyte, and the degree of effect of eye rubbing depends on the period and force of performing eye rubbing. It is recommended to avoid eye rubbing to prevent keratoconus, this can be achieved by avoiding itching and treating dryness of the eye and avoiding wearing eye lenses.展开更多
AIM: To assess the effects of eye rubbing on corneal thickness(CT) and intraocular pressure(IOP)measurements obtained 0-30 min after habitual eye rubbing in symptomatic patients.METHODS: Measurements of IOP and CT wer...AIM: To assess the effects of eye rubbing on corneal thickness(CT) and intraocular pressure(IOP)measurements obtained 0-30 min after habitual eye rubbing in symptomatic patients.METHODS: Measurements of IOP and CT were obtained at five locations(central, temporal, superior,nasal and inferior) before, and every 5min for 30 min interval after 30 s of eye rubbing, for 25 randomly selected eyes of 14 subjects with ocular allergy and 11age-matched normals. Differences in measurements were calculated in each group [Baseline measurements minus measurements recorded at each time interval after eye rubbing(for IOP), and for each corneal location(for CT)]and comparison were then made between groups(allergic versus control) for differences in any observed effects.RESULTS: Within groups, baseline mean IOPs in the allergic patient-group(14.2 ±3.0 mm Hg) and in the control group(13.1±1.9 mm Hg) were similar at all times,after eye rubbing(P 】0.05, for all). The maximum reduction in IOP was 0.8 mm Hg in the control subjects and the maximum increase was also 0.8 mm Hg in the allergic subjects. Between groups(allergic versus control), the changes in IOP remained under 1 mm Hg at all times(P =0.2) after 30 min of eye rubbing. Between 0and 30 min of CT measurements after eye rubbing, the mean central CT(CCT), inferior CT(ICT), superior CT(SCT), temporal CT(TCT) and nasal CT(NCT) did not vary significantly from baseline values in the control and allergic-subject groups(P 】0.05, for both). Between both groups, changes in CT were similar at all locations(P 】0.05)except for the TC which was minimally thinner by about4.4 μm(P =0.001) in the allergic subjects than in the control subjects, 30 min following 30 s of eye rubbing.CONCLUSION: IOP measured in allergic subjects after30 s of habitual eye rubbing was comparable with that obtained in normal subjects at all times between 0 and30 min. Although, CT in the allergic subjects were similar to those of the control subjects at all times, it varied between +10 and-7.5 μm following eye rubbing, with the temporal cornea showing consistent reductions in thickness in the subjects with allergy. However, this reduction was minimal and was considered to not be clinically relevant.展开更多
Considering gyroscopic effects caused by rotational speed,torsional vibration as well as coupling effects among inner rotor,out rotor and casing,a dynamic model of the dual-rotor-casing system is established using fin...Considering gyroscopic effects caused by rotational speed,torsional vibration as well as coupling effects among inner rotor,out rotor and casing,a dynamic model of the dual-rotor-casing system is established using finite element(FE)method.By comparing the natural characteristics obtained from MATLAB and ANSYS,the developed model is verified.Then rubbing-induced vibration responses in dual-rotor-casing system are analyzed.The effects of rotational speed and speed ratio on rubbing vibration responses of the system are discussed.Results show that different combined frequency components will appear in the spectrum except two unbalanced excitation frequencies and their multiple frequency components,and these frequencies can be used as the dual-rotor aero-engine rubbing failure diagnosis frequencies when rubbing occurs.Besides,the amplitude of torsional vibration is larger than that of lateral vibration under the same working condition,and speed ratio has a great impact on the periodicity of the system rubbing-induced motion trajectory.The amplitude of rubbing-induced responses under counter-rotation is less than that under co-rotation with the same parameters.展开更多
The nonlinear dynamic behavior of a rubbing rotor system was studied with a mathematical model established with the eccentricity and interaction between bending and torsional vibrations taken into consideration. The n...The nonlinear dynamic behavior of a rubbing rotor system was studied with a mathematical model established with the eccentricity and interaction between bending and torsional vibrations taken into consideration. The nonlinear vibrational response of a rubbing rotor was analyzed using numerical integral, spectroscopic analysis and Poince mapping method, which made it possible to have better understanding of the vibrational characteristics of partial rubbing and complete circular rubbing rotors. The numerical results reveal the response of torsional vibration mainly takes a form of superchronous motion, and its frequency decreases as the rotational speed increases when partial rubbing occurs, and the response of torsional vibration is synchronous when complete circular rubbing occurs. The comparison of the dynamics of rubbing rotors with and without the interaction between bending and torsional vibrations shows the interaction between bending and torsional vibrations advances the rotational speed, at which the response of bending vibration changes from a synchronous motion into a quasi periodic motion, and the interaction between bending and torsional vibrations reduces stability of the rubbing rotor.展开更多
To solve the problem that it is difficult to identify carbonate low resistivity pays(LRPs) by conventional logging methods in the Rub Al Khali Basin, the Middle East, the variation of fluid distribution and rock condu...To solve the problem that it is difficult to identify carbonate low resistivity pays(LRPs) by conventional logging methods in the Rub Al Khali Basin, the Middle East, the variation of fluid distribution and rock conductivity during displacement were analyzed by displacement resistivity experiments simulating the process of reservoir formation and production, together with the data from thin sections, mercury injection and nuclear magnetic resonance experiments. In combination with geological understandings, the genetic mechanisms of LRPs were revealed, then the saturation interpretation model was selected, the variation laws and distribution range of the model parameters were defined, and finally an updated comprehensive saturation interpretation technique for the LRPs has been proposed. In the study area, the LRPs have resistivity values of less than 1 Ω·m, similar to or even slightly lower than that of the water layers. Geological research reveals that the LRPs were developed in low-energy depositional environment and their reservoir spaces are controlled by micro-scale pore throats, with an average radius of less than 0.7 μm, so they are typical microporous LRPs. Different from LRPs of sandstone and mudstone, they have less tortuous conductive paths than conventional reservoirs, and thus lower resistivity value under the same saturation. Archie’s formula is applicable to the saturation interpretation of LRPs with a cementation index value of 1.77-1.93 and a saturation index value of 1.82-2.03 that are 0.2-0.4 lower than conventional reservoirs respectively. By using interpretation parameters determined by classification statistics of petrophysical groups(PGs), oil saturations of the LRPs were calculated at bout 30%-50%,15% higher than the results by conventional methods, and basically consistent with the data of Dean Stark, RST, oil testing and production. The 15 wells of oil testing and production proved that the coincidence rate of saturation interpretation is over 90%and the feasibility of this method has been further verified.展开更多
Corduroy yarn is generally introduced in a fabric structure of garments due to developing different designs in terms of appearance of fabric which is called corduroy garment. In this study, both corduroy and denim gar...Corduroy yarn is generally introduced in a fabric structure of garments due to developing different designs in terms of appearance of fabric which is called corduroy garment. In this study, both corduroy and denim garments have been made to develop a denim-like wash effect on corduroy garments that will create a new fashion, value addition and sustainability in washing technology. Both the garments are treated with the same washing process. Also, some physical properties have been investigated for both washed garments such as Washing Effect Test, Tear Strength Test, GSM Test, and Rubbing Test. Then a comparative study has been done on both washed garments. The appearance of washed corduroy garments is satisfactory. The physical properties also show a better result. Finally, a satisfactory result is achieved from this work.展开更多
基金Project supported by the National Science and Technology Major Project of China (No. 2017-V-0009)the National Natural Science Foundation of China (Nos. 12032015 and 12121002)the National Funding Program for Postdoctoral Researchers of China (No. GZC20231586)。
文摘Blade rubbing faults cause detrimental impact on the operation of aeroengines. Most of the existing studies on blade rubbing in the shaft-disk-blade-casing(SDBC) system have overlooked the elastic deformation of the blade, while some only consider the whirl of the rotor, neglecting its spin. To address these limitations, this paper proposes a dynamic model with large rotation for the SDBC system. The model incorporates the spin and whirl of the rotor, enabling the realistic reproduction of multiblade rubbing faults. To verify the accuracy of the SDBC model with large rotation and demonstrate its capability to effectively consider the rotational effects such as the centrifugal stiffening and gyroscopic effects, the natural characteristics and dynamic responses of the proposed model are compared with those obtained from reported research and experimental results. Furthermore, the effects of the rotating speed, contact stiffness,and blade number on the dynamic characteristics of the SDBC system with multi-blade rubbing are investigated. The results indicate that the phase angle between the rotor deflection and the unbalance excitation force increases with the increasing rotating speed,which significantly influences the rubbing penetration of each blade. The natural frequency of the SDBC system with rubbing constrain can be observed in the acceleration response of the casing and the torsional response of the shaft, and the frequency is related to the contact stiffness. Moreover, the vibration amplitude increases significantly with the product of the blade number under rubbing, and the rotating frequency approaches the natural frequency of the SDBC system. The proposed model can provide valuable insight for the fault diagnosis of rubbing in bladed rotating machinery.
基金the financial support from the National Natural Science Foundation of China (52125301 and 52203123)the Fundamental Research Funds for the Central Universitiespartially sponsored by the Double First-Class Construction Funds of Sichuan University。
文摘The development of a durable metallic coating on diverse substrates is both intriguing and challenging,particularly in the research of metal-conductive materials for applications such as batteries,soft electronics,and beyond.Herein,by learning from the pencil-writing process,a facile solid-ink rubbing technology(SIR-tech)is invented to address the above challenge.The solid-ink is exampled by rational combination of liquid metal and graphite particles.By harnessing the synergistic effects between rubbing and adhesion,controllable metallic skin is successfully formed onto metals,woods,ceramics,and plastics without limitation in size and shape.Moreover,outperforming pure liquid-metal coating,the composite metallic skin by SIR-tech is very robust due to the self-lamination of graphite nanoplate exfoliated by liquid-metal rubbing.The critical factors controlling the structures-properties of the composite metallic skin have been systematically investigated as well.For applications,the SIR-tech is demonstrated to fabricate high-performance composite current collectors for next-generation batteries without traditional metal foils.Meanwhile,advanced skin-electrodes are further demonstrated for stable triboelectricity generation even under temperature fluctuation from-196 to 120℃.This facile and highly-flexible SIR-tech may work as a powerful platform for the studies on functional coatings by liquid metals and beyond.
文摘Objectives: The study aimed to determine the most appropriate hearing screening test to identify disabling hearing loss for adults aged 65 years or older.Methods: This study included 577 older adults. Four hearing screening tests were considered in the study, including the Hearing Handicap Inventory for Elderly Screening(HHIE-s), three single question tests, the whisper test, and the finger rub test. The sensitivity and specificity of these tests referenced to the hearing threshold of disabling hearing loss were estimated.Results: Among all tests, only the single self-perception question(0.7064 for sensitivity;0.7225 for specificity) and whisper test(0.7833 for sensitivity;0.7708 for specificity) could obtain both sensitivity and specificity higher than 70% for adults aged ≥65 years.Conclusion: Overall, we suggest using the whisper test to identify disabling hearing loss(>40 dB HL at the better ear) for adults aged 65 years or older. However, if the conditions do not permit, the single selfperception question is also acceptable. Moreover, HHIE-s might not be a good test to detect disabling hearing loss for adults aged 80 years or older.
文摘It*ss very important to identify the load on rotor bearing system. Based on load identification in time domain, a new method combined with transfer matrix method is applied in rubbing rotor bearing system to estimate the force on rubbing rotor for the first time. Avoiding calculating the modal parameters, the outside excitation force on multi point and the distribute of internal forces on rubbing rotor bearing system can be identified by this way at the same time. Finally, the simulation is made on partial lateral rubbing rotor bearing system. For the faulty of rotor/stator rub, the point where rubbing occurs and the change of impact forces can be detected by this method in order to improve the accuracy of rotor/stator rub faulty diagnosis.
文摘According to the background of the rub impact faults of aerial engines and industrial turbines, two kinds of test rigs, on the base of the dynamics model, are established to study the rub impact faults between rotor and stator with free supports. The orbit of the vibration of rotor displacement is respectively examined on the four impact conditions, which are the normal state with no impact, the early sharp impact statement, the semi sharp impact statement and the terminal blunt impact statement. The route to chaos, appearing with the early sharp impact, is observed for the first time. By analyzing the frequency domain characteristics of the experimental data on four impact conditions, it is testified that the appearance of the sub harmonic vibrations of the order 1/3 and 1/4 is the effective evidence to judge whether or not the blade has initial light rub impact. When there are only the harmonic vibrations of the order of 1/1 and 1/2, the blade stator rub impact faults have become very serious.
文摘The effect of La on the performance of a supported RuB amorphous alloy catalyst for benzene selective hydrogenation was studied by means of activity and selectivity tests, such as HRTEM, SAED, XPS, and XRD. The results show that the addition of La to RuB amorphous alloy catalyst can evidently increase the activity and improve the thermal stability of RuB amorphous alloy to refrain its crystallization. The promoting effect of La on the activity of RuB amorphous alloy catalyst is because of the high dispersion of the active components.
文摘Keratoconus is a non-inflammatory disorder which is gradual in development;corneal thinning and ectatic protrusion characterizes it. Keratoconus prevalence varies between different regions depending on several factors that affecting its prevalence. There are risk factors for developing keratoconus such as demographic and environmental factors. It was suggested that eye rubbing was associated with the development of keratoconus. The main aim of this review was to summarize the literature data about keratoconus and to identify the role of eyerubbing in the aetiology of the disease. A number of 24 articles was reviewed through the Pub Med, Google Scholar and Research Gates. There are many keywords used such as keratoconus, aetiology of keratoconus, eye rubbing, keratoconus prevalence, keratoconus and eye rubbing correlation. We concluded that eye rubbing causes the thinning of keratocyte, and the degree of effect of eye rubbing depends on the period and force of performing eye rubbing. It is recommended to avoid eye rubbing to prevent keratoconus, this can be achieved by avoiding itching and treating dryness of the eye and avoiding wearing eye lenses.
基金Research Centre,College of Applied Medical Sciences and the Deanship of Scientific Research at King Saud University for funding this research
文摘AIM: To assess the effects of eye rubbing on corneal thickness(CT) and intraocular pressure(IOP)measurements obtained 0-30 min after habitual eye rubbing in symptomatic patients.METHODS: Measurements of IOP and CT were obtained at five locations(central, temporal, superior,nasal and inferior) before, and every 5min for 30 min interval after 30 s of eye rubbing, for 25 randomly selected eyes of 14 subjects with ocular allergy and 11age-matched normals. Differences in measurements were calculated in each group [Baseline measurements minus measurements recorded at each time interval after eye rubbing(for IOP), and for each corneal location(for CT)]and comparison were then made between groups(allergic versus control) for differences in any observed effects.RESULTS: Within groups, baseline mean IOPs in the allergic patient-group(14.2 ±3.0 mm Hg) and in the control group(13.1±1.9 mm Hg) were similar at all times,after eye rubbing(P 】0.05, for all). The maximum reduction in IOP was 0.8 mm Hg in the control subjects and the maximum increase was also 0.8 mm Hg in the allergic subjects. Between groups(allergic versus control), the changes in IOP remained under 1 mm Hg at all times(P =0.2) after 30 min of eye rubbing. Between 0and 30 min of CT measurements after eye rubbing, the mean central CT(CCT), inferior CT(ICT), superior CT(SCT), temporal CT(TCT) and nasal CT(NCT) did not vary significantly from baseline values in the control and allergic-subject groups(P 】0.05, for both). Between both groups, changes in CT were similar at all locations(P 】0.05)except for the TC which was minimally thinner by about4.4 μm(P =0.001) in the allergic subjects than in the control subjects, 30 min following 30 s of eye rubbing.CONCLUSION: IOP measured in allergic subjects after30 s of habitual eye rubbing was comparable with that obtained in normal subjects at all times between 0 and30 min. Although, CT in the allergic subjects were similar to those of the control subjects at all times, it varied between +10 and-7.5 μm following eye rubbing, with the temporal cornea showing consistent reductions in thickness in the subjects with allergy. However, this reduction was minimal and was considered to not be clinically relevant.
基金supported by the National Natural Science Foundation of China(No.11772089)the Fundamental Research Funds for the Central Universities (Nos. N160312001and N160313004)the Research Project of State Key Laboratory of Mechanical System and Vibration(No.MSV201707)
文摘Considering gyroscopic effects caused by rotational speed,torsional vibration as well as coupling effects among inner rotor,out rotor and casing,a dynamic model of the dual-rotor-casing system is established using finite element(FE)method.By comparing the natural characteristics obtained from MATLAB and ANSYS,the developed model is verified.Then rubbing-induced vibration responses in dual-rotor-casing system are analyzed.The effects of rotational speed and speed ratio on rubbing vibration responses of the system are discussed.Results show that different combined frequency components will appear in the spectrum except two unbalanced excitation frequencies and their multiple frequency components,and these frequencies can be used as the dual-rotor aero-engine rubbing failure diagnosis frequencies when rubbing occurs.Besides,the amplitude of torsional vibration is larger than that of lateral vibration under the same working condition,and speed ratio has a great impact on the periodicity of the system rubbing-induced motion trajectory.The amplitude of rubbing-induced responses under counter-rotation is less than that under co-rotation with the same parameters.
文摘The nonlinear dynamic behavior of a rubbing rotor system was studied with a mathematical model established with the eccentricity and interaction between bending and torsional vibrations taken into consideration. The nonlinear vibrational response of a rubbing rotor was analyzed using numerical integral, spectroscopic analysis and Poince mapping method, which made it possible to have better understanding of the vibrational characteristics of partial rubbing and complete circular rubbing rotors. The numerical results reveal the response of torsional vibration mainly takes a form of superchronous motion, and its frequency decreases as the rotational speed increases when partial rubbing occurs, and the response of torsional vibration is synchronous when complete circular rubbing occurs. The comparison of the dynamics of rubbing rotors with and without the interaction between bending and torsional vibrations shows the interaction between bending and torsional vibrations advances the rotational speed, at which the response of bending vibration changes from a synchronous motion into a quasi periodic motion, and the interaction between bending and torsional vibrations reduces stability of the rubbing rotor.
基金Supported by the CNPC Scientific Research and Technology Development Project (2019D-4410)。
文摘To solve the problem that it is difficult to identify carbonate low resistivity pays(LRPs) by conventional logging methods in the Rub Al Khali Basin, the Middle East, the variation of fluid distribution and rock conductivity during displacement were analyzed by displacement resistivity experiments simulating the process of reservoir formation and production, together with the data from thin sections, mercury injection and nuclear magnetic resonance experiments. In combination with geological understandings, the genetic mechanisms of LRPs were revealed, then the saturation interpretation model was selected, the variation laws and distribution range of the model parameters were defined, and finally an updated comprehensive saturation interpretation technique for the LRPs has been proposed. In the study area, the LRPs have resistivity values of less than 1 Ω·m, similar to or even slightly lower than that of the water layers. Geological research reveals that the LRPs were developed in low-energy depositional environment and their reservoir spaces are controlled by micro-scale pore throats, with an average radius of less than 0.7 μm, so they are typical microporous LRPs. Different from LRPs of sandstone and mudstone, they have less tortuous conductive paths than conventional reservoirs, and thus lower resistivity value under the same saturation. Archie’s formula is applicable to the saturation interpretation of LRPs with a cementation index value of 1.77-1.93 and a saturation index value of 1.82-2.03 that are 0.2-0.4 lower than conventional reservoirs respectively. By using interpretation parameters determined by classification statistics of petrophysical groups(PGs), oil saturations of the LRPs were calculated at bout 30%-50%,15% higher than the results by conventional methods, and basically consistent with the data of Dean Stark, RST, oil testing and production. The 15 wells of oil testing and production proved that the coincidence rate of saturation interpretation is over 90%and the feasibility of this method has been further verified.
文摘Corduroy yarn is generally introduced in a fabric structure of garments due to developing different designs in terms of appearance of fabric which is called corduroy garment. In this study, both corduroy and denim garments have been made to develop a denim-like wash effect on corduroy garments that will create a new fashion, value addition and sustainability in washing technology. Both the garments are treated with the same washing process. Also, some physical properties have been investigated for both washed garments such as Washing Effect Test, Tear Strength Test, GSM Test, and Rubbing Test. Then a comparative study has been done on both washed garments. The appearance of washed corduroy garments is satisfactory. The physical properties also show a better result. Finally, a satisfactory result is achieved from this work.
