An integrated monitoring system for running parameters of key mining equipmenton the basis of condition monitoring technology and modern communication networktechnology was developed.The system consists of a client co...An integrated monitoring system for running parameters of key mining equipmenton the basis of condition monitoring technology and modern communication networktechnology was developed.The system consists of a client computer with functions ofsignal acquisition and processing, and a host computer in the central control room.Thesignal acquisition module of the client computer can collect the running parameters fromvarious monitoring terminals in real-time.The DSP high-speed data processing system ofthe main control module can quickly achieve the numerical calculation for the collectedsignal.The signal modulation and signal demodulation are completed by the frequencyshift keying circuit and phase-locked loop frequency circuit, respectively.Finally, the signalis sent to the host computer for logic estimation and diagnostic analysis using the networkcommunication technology, which is helpful for technicians and managers to control therunning state of equipment.展开更多
Combined with the second rotary kiln of Alumina Factory in Great Wall Aluminum Company, the mechanics characteristics of statically indeterminate large-scale rotary kiln with variable cross-sections is analyzed. In or...Combined with the second rotary kiln of Alumina Factory in Great Wall Aluminum Company, the mechanics characteristics of statically indeterminate large-scale rotary kiln with variable cross-sections is analyzed. In order to adjusting the running axis of rotary kiln, taking the force equilibrium of the rollers and the minimum of relative axis deflection as the optimization goal, the multi-objective optimization model of mechanical running conditions of kiln rotary is set up. The mechanical running conditions of the second rotary kiln after multi-objective optimization adjustment are compared with those before adjustment and after routine adjustment. It shows that multi-objective optimization adjustment can make axis as direct as possible and can distribute kiln loads equally.展开更多
The bearings in the trunnion of convertor are characterized by low-speed, heavy-load and huge-dimension. In case they experience failure in operation, the output of the convertor and even that of the whole product lin...The bearings in the trunnion of convertor are characterized by low-speed, heavy-load and huge-dimension. In case they experience failure in operation, the output of the convertor and even that of the whole product line would be affected and the huge loss would be resulted in. Thus it is very important to master the working conditions of the bearings. Vibration and oil analysis are two main techniques to monitor the conditions of the rotary machine at present. But normal vibration analysis cannot be used here because of the limitation of their sensors in signal collecting for the rotary frequencies of the bearings are too low. In this paper, the wear condition of the bearing on the driving side of the No.5 convertor during/after the run-in period was monitored through oil analysis including atomic emissive spectrum and ferrography. It has been observed that its run-in period was as long as 19 months. This is mainly attributed to the relative short accumulated working time of the bearing.展开更多
Symmetrical passive running of a simple spring model is commonly used to predict the locomotion of real animals and develop the design strategies for legged systems. If the initial conditions for running can be found ...Symmetrical passive running of a simple spring model is commonly used to predict the locomotion of real animals and develop the design strategies for legged systems. If the initial conditions for running can be found automatically, we can expand the ranges of the model parameters freely. To achieve this objective, we derive an efcient searching procedure based on analysis of the symmetries. Using this process, the desired initial states of the passive running are obtained. Existence of the results reveals that the leg symmetries can be used to generate the symmetrical running. Moreover, the leg forces are associated with the running pattern, implying that we should choose suitable motion for the given model characteristics.展开更多
基金Supported by the National Hi-tech Research and Development Program of China(2007AA04Z415)the Hunan Province and Xiangtan City Natural Science Joint Foundation(09JJ8005)the Torch Program Project of Hunan Province(2008SH044)
文摘An integrated monitoring system for running parameters of key mining equipmenton the basis of condition monitoring technology and modern communication networktechnology was developed.The system consists of a client computer with functions ofsignal acquisition and processing, and a host computer in the central control room.Thesignal acquisition module of the client computer can collect the running parameters fromvarious monitoring terminals in real-time.The DSP high-speed data processing system ofthe main control module can quickly achieve the numerical calculation for the collectedsignal.The signal modulation and signal demodulation are completed by the frequencyshift keying circuit and phase-locked loop frequency circuit, respectively.Finally, the signalis sent to the host computer for logic estimation and diagnostic analysis using the networkcommunication technology, which is helpful for technicians and managers to control therunning state of equipment.
文摘Combined with the second rotary kiln of Alumina Factory in Great Wall Aluminum Company, the mechanics characteristics of statically indeterminate large-scale rotary kiln with variable cross-sections is analyzed. In order to adjusting the running axis of rotary kiln, taking the force equilibrium of the rollers and the minimum of relative axis deflection as the optimization goal, the multi-objective optimization model of mechanical running conditions of kiln rotary is set up. The mechanical running conditions of the second rotary kiln after multi-objective optimization adjustment are compared with those before adjustment and after routine adjustment. It shows that multi-objective optimization adjustment can make axis as direct as possible and can distribute kiln loads equally.
文摘The bearings in the trunnion of convertor are characterized by low-speed, heavy-load and huge-dimension. In case they experience failure in operation, the output of the convertor and even that of the whole product line would be affected and the huge loss would be resulted in. Thus it is very important to master the working conditions of the bearings. Vibration and oil analysis are two main techniques to monitor the conditions of the rotary machine at present. But normal vibration analysis cannot be used here because of the limitation of their sensors in signal collecting for the rotary frequencies of the bearings are too low. In this paper, the wear condition of the bearing on the driving side of the No.5 convertor during/after the run-in period was monitored through oil analysis including atomic emissive spectrum and ferrography. It has been observed that its run-in period was as long as 19 months. This is mainly attributed to the relative short accumulated working time of the bearing.
文摘Symmetrical passive running of a simple spring model is commonly used to predict the locomotion of real animals and develop the design strategies for legged systems. If the initial conditions for running can be found automatically, we can expand the ranges of the model parameters freely. To achieve this objective, we derive an efcient searching procedure based on analysis of the symmetries. Using this process, the desired initial states of the passive running are obtained. Existence of the results reveals that the leg symmetries can be used to generate the symmetrical running. Moreover, the leg forces are associated with the running pattern, implying that we should choose suitable motion for the given model characteristics.
