Characteristics of coal resources in China and statistical analysis and preventive measures for coal mine accidents

In the process of green and smart mine construction under the context of carbon neutrality,China's coal safety situation has been continuously improved in recent years.In order to recognize the development of coal production in China and prepare for future monitoring and prevention of safety incidents,this study mainly elaborated on the basic situation of coal resources and national mining accidents over the past five years(2017-2021),from four dimensions(accident level,type,region,and time),and then proposed the preventive measures based on accident statistical laws.The results show that the storage of coal resources has obvious geographic characteristics,mainly concentrated in the Midwest,with coal resources in Shanxi and Shaanxi accounting for about 49.4%.The proportion of coal consumption has dropped from 70.2%to 56%between 2011 and 2021,but still accounts for more than half of the all.Meanwhile,the accident-prone areas are positively correlated with the amount of coal production.Among different levels of coal mine accidents,general accidents had the highest number of accidents and deaths,with 692 accidents and 783 deaths,accounting for 87.6%and 54.64%respectively.The frequency of roof,gas,and transportation accidents is relatively high,and the number of single fatalities caused by gas accidents is the largest,about 4.18.In terms of geographical distribution of accidents,the safety situation in Shanxi Province is the most severe.From the time distribution of coal mine accidents,the accidents mainly occurred in July and August,and rarely occurred in February and December.Finally,the"4+4"safety management model is proposed,combining the statistical results with coal production in China.Based on the existing health and safety management systems,the manage-ments are divided into four sub-categories,and more specific measures are suggested.

Safety assessment of platform loadout procedures based on unascertained measures

Safety assessment of offshore platforms is an urgent task. Such assessments are now focusing on the structure, maintenance, and retirement of a platform. Some methods employed have many shortcomings. For example, they cannot make the reliability adequately explicable. Therefore, a mathematical tool, the unascertained measure, was introduced. First, the basic knowledge of the unascertained sets was introduced briefly. Second, the unascertained measure was defined and credible identification was set up. The method has been introduced into the fields for safety assessment of a jacket loadout procedure. Engineering practices showed that it can complete the safety assessment systematically and scientifically without any assumption. The work should have significance in theory and practice for offshore engineering.

Safety Risks and Preventive Measures for Construction Supervision of Construction Projects

Based on the analysis of construction project safety risk and its preventive measures, it is first necessary to clarify the safety risks and existing problems of construction project supervision and to formulate effective construction procedures. It is necessary to check the production safety of the construction unit, strengthen the company's own safety production management, and reasonably control the risk to familiarize with the construction drawings, and make a special construction plan for the work of the bottom line. Finally, an elective solution is drawn to comprehensively expound the importance of construction project construction safety risk and its preventive measures.

Study on the Safety and Prevention Technology of Coal Mining under the River in Xingyuan Coal Mine

Coal mining-induced surface subsidence poses significant ecological and infrastructural challenges, necessitating a comprehensive study to ensure safe mining practices, particularly in underwater conditions. This project aims to address the extensive impact of coal mining on the environment, infrastructure, and overall safety, focusing on the Shigong River area above the working face. The study employs qualitative and quantitative analyses, along with on-site engineering measurements, to gather data on crucial parameters such as coal seam characteristics, roof rock lithology, thickness, water resistance, and structural damage degree. The research encompasses a multidisciplinary approach, involving mining, geology, hydrogeology, geophysical exploration, rock mechanics, mine surveying, and computational mathematics. The importance of effective safety measures and prevention techniques is emphasized, laying the foundation for research focused on the Xingyun coal mine. The brief concludes by highlighting the potential economic and social benefits of this project and its contribution to valuable experience for future subsea coal mining.

Compliance of Milk Quality and Safety Measures Among Milk Producers and Milk Collection Centers in South Region of Punjab Province,Pakistan

The present study was conducted in four districts of Punjab Province to examine the attitude of milk producers and milk collection agents toward compliance of milk quality and safety parameters. In current scenario, the attitude of consumers for safe food in accordance to quality standards is ever increasing. The dairy industry in Pakistan is confronting many challenges to adapt these food safety and quality measures. This study was purposely conducted in the south region of Punjab Province, as this region has rich population of livestock and milk production. To collect essential data, field study was carded out in selected four districts of Punjab Province. Field survey for dairy farmers and milk collection centers was performed in two phases. The analysis of primary data was carried out by calculating the Likert scale mean value, analysis of variance （one-way） and other descriptive statistics tools. The results showed that 76.4% milk producers had no awareness about Punjab food quality laws; as Likert-scale mean value was 1.93. The compliance level for the management practices such as Hazard Analysis of Critical Control Point （HCCAP）, Good Animal Practices （GAP） and Good Veterinary Practices （GVP） etc. was also very poor. Approximately, 32.57% milk collectors （very frequently） applied milk quality testing parameters whereas 50.72% milk collectors merely used sensory quality inspection methods at the time of milk purchase from dairy farmers. For a sustainable supply of good quality raw milk to the dairy industry in Pakistan, it was recommended that the departments for hygiene and food inspection should be vigilant. The prescribed food safety laws relating to milk production and marketing activities should be enforced properly to improve the situation.

Strategic Thinking and Measures for Plant Quarantine and Food Safety

This paper describes the importance of plant quarantine to the food safety in China through cases where plant quarantine helps to effectively intercept harmful organisms for food safety and promote export and import trading.It also presents the existing problems in plant quarantine work and appropriate measures.

Research On Construction Traffic Safety Measures Based On FAHP Model In Hydropower Project

With the rapid expansion of hydropower projects, Construction safety problem has become one of the bottlenecks for the development of hydropower industry. Combined with the construction of the diversion channel project of Guan Yinyan hydropower station, from the point of view of construction traffic safety, based on the result of the FAHP model, factors which influence the construction safety of the diversion channel project of Guan Yinyan hydropower station have been found, relative measures focuses on the approach to eliminate hazards and guarantee construction safety have been elaborated.

A Study on the Awareness of Fire Safety Measures for Users and Staff of Shopping Malls： The Case of Mlimani City and Quality Centre in Dar es Salaam

Shopping malls are accessed by people from all walks of life and, therefore, provision of adequate fire safety measures is equally important. In Dares Salaam, Tanzania, at large construction, use of shopping malls is a relatively new experience, and risks associated with use of shopping malls, such as fire outbreak, are not evident to frequent users. The main purpose of the study is to assess awareness of fire safety measures for users and staff of two shopping malls located in Dares Salaam. The research adopted a case study strategy, and 100 respondents were involved in the study. Both random and purposive sampling methods were used to select respondents for the study. Multiple sources of evidence were used in data collection, namely literature review, observations, questionnaires and interviews. Findings indicate that both shopping malls have in place fairly fire prevention measures with varying degrees. Majority of staff and users indicated that they know fire safety measures but their poor knowledge was reflected in assessing them on diferent equipment and installations, such as foam, hose reel, sprinklers and drenchers. The paper concludes that awarenes of fire safety measure of users and staff of the two shopping malls is relatively low. It is, therefore, recommended that provision of fire safety training and instructions, such as posters for users and seminars for staff of shopping malls, shall be a main focus of shopping malls owners and responsible authorities.

Construction Technology and Safety Monitoring Measures of Road and Bridge Engineering

With the acceleration of urbanization and the continuous improvement of urban infrastructure construction,roads and bridges,as an important infrastructure content in China,directly affect people's daily travel.Therefore,the construction and management of roads and bridges must be improved to ensure the quality and safety of roads and bridges and effectively prevent safety accidents.Strengthen the management of road and bridge construction through safety monitoring,improve the safety factor of the project and ensure people's travel safety.This paper mainly analyzes the common diseases and construction technology of road and bridge engineering construction,and puts forward safety monitoring measures.

Quality Assessment and Measurement for Internet Video Streaming

Benefiting from the improvements of Internet infrastructure and video coding technology, online video services are becoming a new favorite form of video entertainment.However, most of the existing video quality assessment methods are designed for broadcasting/cable televisions and it is still an open issue how to assess and measure the quality of online video services. In this paper, we survey the state-of-the-art video streaming technologies, and present a framework of quality assessment and measurement for Internet video streaming. This paper introduces several metrics for user's quality of experience(QoE).These QoE metrics are classified into two categories: objective metrics and subjective metrics. It is different for service participators to measure objective and subjective metrics.The QoE measurement methodologies consist of client-side, server-side, and in-network measurement.

Diamond Interchange Performance Measures Using Connected Vehicle Data

Diamond interchanges are frequently used where a freeway intersects a two-way surface street. Most of the techniques to evaluate the performance of diamond interchanges rely on the Highway Capacity Manual (HCM), simulation, Automated Traffic Signal Performance Measures (ATSPMs), and historical crash data. HCM and simulation techniques require on-site data collection to obtain models’ inputs. ATSPMs need high-resolution controller event data acquired from roadway sensing equipment. Safety studies typically need 3 to 5 years of crash data to provide statistically significant results. This study utilizes commercially available connected vehicle (CV) data to assess the performance and operation of a three- and four-phase diamond interchange located in Indianapolis, Indiana, and Dallas, Texas, respectively. Over 92,000 trajectories and 1,400,000 GPS points are analyzed from August 2020 weekdays CV data. Trajectories are linear-referenced to generate Purdue Probe Diagrams (PPDs) from which arrivals on green (AOG), split failures, downstream blockage, and movement-based control delay are estimated. In addition, an extension of the PPD is presented that characterizes the complete journey of a vehicle travelling through both signals of the diamond interchange. This enhanced PPD is a significant contribution as it provides an analytical framework and graphical summary of the operational characteristics of how the external movements traverse the entire system. The four-phase control showed high internal progression (99% AOG) compared to the moderate internal progression of the three-phase operation (64% AOG). This is consistent with the design objectives of three- and four-phase control models, but historically these quantitative AOG measures were not possible to obtain with just detector data. Additionally, a graphical summary that illustrates the spatial distribution of hard-braking and hard-acceleration events is also provided. The presented techniques can be used by any agency to evaluate the performance of their diamond interchanges without on-site data collection or capital investments in sensing infrastructure.

Influences of 500 kV Transmission Lines on Wetland Ecosystem and Its Protective Countermeasures--A Case Study of the Lake Wetland Natural Reserve along the Yangtze River in Anqing City

The impact of 500 kV transmission lines of Anqing power plant across the lake wetland reserve along the Yangtze River on the safety of the ecosystem was taken as the researched object.The power frequency electric field intensity(PFEFI),power frequency magnetic field intensity(PFMFI),radio interference,construction noise,vegetation destruction and the influence on water quality were investigated and monitored,and the influences of PFEFI,PFMFI,radio interference and construction noise on wild animals,especially the habitats and migration of birds were mainly researched.The direct and indirect influences on the surrounding environment as well as plants and animals in sensitive areas were analyzed and predicted.The results firstly showed there existed a 182 400m^3 stereo-space(PFEFI>4kV/m)which made flying birds unsafe under the lowest height 11 mof the lines,which fills the gap in the research of this field.Finally,some operational protection countermeasures were put forward at the current technical level to achieve the win-win goal of economic development and natural protection.

Smart industrial IoT empowered crowd sensing for safety monitoring in coal mine

The crowd sensing technology can realize the sensing and computing of people,machines,and environment in smart industrial IoT-based coal mine,which provides a solution for safety monitoring through distributed intelligence optimization.However,due to the difficulty of neural network training to achieve global optimality and the fact that traditional LSTM methods do not consider the relationship between adjacent machines,the accuracy of human body position prediction and pressure value prediction is not high.To solve these problems,this paper proposes a smart industrial IoT empowered crowd sensing for safety monitoring in coal mine.First,we propose a Particle Swarm Optimization-Elman Neural Network(PE)algorithm for the mobile human position prediction.Second,we propose an ADI-LSTM neural network prediction algorithm for pressure values of machines supports in underground mines.Among them,our proposed PE algorithm has the lowest average cumulative prediction error,and the trajectory fit rate is improved by 24.1%,13.9%and 8.7%compared with Kalman filtering,Elman and Kalman plus Elman algorithms,respectively.Meanwhile,compared with single-input ARIMA,RNN,LSTM,and GRU,the RMSE values of our proposed ADI-LSTM are reduced by 36.6%,52%,32%,and 13.7%,respectively;and the MAPE values are reduced by 0.0003%,0.9482%,1.1844%,and 0.3620%,respectively.

Assessment of Traffic Safety State of Ship Based on Unascertained Measure

Using the theory and method of unascertained measure, an unascertained measure model and the related confidence rule are established to assess the safety state of ship. Thus, the dangerous factors in the hull system can be identified, and the accident possibility, loss, and injury degree can be forcasted. An application result shows that the the proposed method is effective in assessment of the traffic safety of ships, and it is more simple in computation than the fuzzy synthetic evaluation method. The proposed method can provide a scientific basis for realizing shipping transportation security and formulating preventive measures.

Hidden Dangers and Preventive Measures in the Inventory of Articles in Operating Room

Operating Room is an important place for surgical diagnosis and treatment and rescue of patients. With the rapid development of medical technology, high, precision, sharp continuous development, operating room safety management is particularly important. The error of the counting of the surgical articles causes the foreign body left in the patient’s body, which will cause irreversible damage to the patient and even cause the medical dispute and touch the legal problem. Operation items inventory system is an important working system in the operating room. Scientific and standardized methods and systems for counting surgical instruments and dressings during operation can prevent foreign bodies from being left in the body, prevent errors and accidents in the operating room, and are very important for ensuring the safety of the operation of patients. In order to ensure the safety of patients, it is necessary to ensure the correct inventory of surgical items. The factors affecting the accuracy of item counting in the operating room and the preventive measures are summarized as follows.

Functional safety verification and performance measurement of train-train communication link

The short-range wireless communication technology has advanced considerably and provides the feasibility of train-train(T2T)communication link in the communication-based train control system.The introduction of the T2T link would reduce the headway and improve operational efficiency.Formal methods are system design techniques that use rigorously specified mathematical models to ensure all behaviors work as expected.And it is exactly the functional safety verification needed.Therefore,to deal with the functional safety verification of the T2T link,an untimed colored petri net model is first constructed.Secondly,the verification process is performed.Conclusions can be drawn from the state space report and the computation tree logic queries.Lastly,the model is parameterized,and then data log files are obtained for further performance measurement.Results show that the proposed criteria are satisfied and there are no defects in the basic design requirements.The transmission delay has considered the reconnection,transmission errors and the interruption.The probability of the delay lower than 150 ms accounts for 98.106%,which meets the specification and the previous field test.

Evaluation of IoT Measurement Solutions from a Metrology Perspective

To professionally plan and manage the development and evolution of the Internet of Things(IoT),researchers have proposed several IoT performance measurement solutions.IoT performance measurement solutions can be very valuable for managing the development and evolution of IoT systems,as they provide insights into performance issues,resource optimization,predictive maintenance,security,reliability,and user experience.However,there are several issues that can impact the accuracy and reliability of IoT performance measurements,including lack of standardization,complexity of IoT systems,scalability,data privacy,and security.While previous studies proposed several IoT measurement solutions in the literature,they did not evaluate any individual one to figure out their respective measurement strengths and weaknesses.This study provides a novel scheme for the evaluation of proposed IoT measurement solutions using a metrology-coverage evaluation based on evaluation theory,metrology principles,and software measurement best practices.This evaluation approach was employed for 12 IoT measure categories and 158 IoT measurement solutions identified in a Systematic Literature Review(SLR)from 2010 to 2021.The metrology coverage of these IoT measurement solutions was analyzed from four perspectives:across IoT categories,within each study,improvement over time,and implications for IoT practitioners and researchers.The criteria in this metrology-coverage evaluation allowed for the identification of strengths and weaknesses in the theoretical and empirical definitions of the proposed IoT measurement solutions.We found that the metrological coverage varies significantly across IoT measurement solution categories and did not show improvement over the 2010–2021 timeframe.Detailed findings can help practitioners understand the limitations of the proposed measurement solutions and choose those with stronger designs.These evaluation results can also be used by researchers to improve current IoT measurement solution designs and suggest new solutions with a stronger metrology base.

Research on the Chemical Hazard Risk of Toys Exported to EU from China Based on the Analysis of the EU “Safety Gate” Alerts Cases

Based on the analysis of the 2544 alert cases from “Safety Gate” (the EU rapid alert system for dangerous non-food products) of toys exported to the EU market from China in the past five years (2017-2021), this study focuses on the chemical hazards as the key research object, investigates and identifies categories of toy products and related chemicals with high notification rate. The research results have shown that the most seriously and frequently alerted toy products due to chemical hazards from China exported to the EU are plastic dolls, slimes, rubber toy balloons, toy guns and squeezable toys, while the high failure rate of chemicals in sequence are phthalates, boron element, N-Nitrosamines and N-Nitrosatable substances, and bis(2-(dimethylamino)ethyl) ether. This study aims to improve the efficiency of inspection and test of export toys, and provide decision-making references for Chinese toy export enterprises to respond to EU technical trade measures.

基于CAN和REST物联网技术的智能矿山安全检测系统研发

针对矿井安全生产检测数据传输效率低下和共享性差的特点,综合考虑开发成本与工作环境要求,基于CAN(Controller Area Network)和REST(Representational State Transfer)物联网技术提出了智能矿山安全检测方法,设计了矿山安全检测判别程序,采用最大熵模型算法开发了数据信息预警程序。结合CAN总线技术,将多传感器信息进行有机融合并进行安全数据检测,将井下传感器设备相关信息经过判断分析后传输至总机。将所提安全检测方法进行了系统开发,并在淮北某矿进行了应用。结果表明:基于CAN和REST物联网技术的安全检测方法能够实现多点测量,并可随机增减检测设备,可实现数据实时传输和共享,有助于实现矿山安全实时检测。