The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corros...The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corrosive gases at high temperature. In this work, a frozen-wall technique was proposed to produce a physical barrier between construction materials and corrosive reactants. The protective performance of the frozen wall against molten salt was assessed using FLiNaK molten salt with introduced fluorine gas, which was regarded as a simulation of the FVM process. SS304, SS316L, Inconel 600 and graphite were chosen as the test samples. The extent of corrosion was characterized by an analysis of weight loss and scanning electron microscope studies. All four test samples suffered severe corrosion in the molten salt phase with the corrosion resistance as: Inconel 600>SS316L>graphite>SS304. The presence of the frozen wall could protect materials against corrosion by molten salt and corrosive gases, and compared with materials exposed to molten salt, the corrosion rates of materials protected by the frozen wall were decreased by at least one order of magnitude.展开更多
Hot corrosion has been extensively observed in various high temperature applications,which might cause large economic losses.To deepen the insight and understanding of hot corrosion,herein,we provide a detailed discus...Hot corrosion has been extensively observed in various high temperature applications,which might cause large economic losses.To deepen the insight and understanding of hot corrosion,herein,we provide a detailed discussion on hot corrosion induced by molten sulfate salt,in which Na_(2)SO_(4)is the main chemical reactant.The hot corrosion is triggered and sustained by the negative solubility gradient of protective oxide from the oxide/salt interface to salt/gas interface.In this work,we reviewed several key factors,including temperature,gas composition,molten salt composition,alloy element and external stress,influencing the hot corrosion of alloy beneath the molten salt.The application of anti-corrosion coating seems to be the most effective and commercial mothed to mitigate hot corrosion.Therefore,the progress of the development of effective coatings,e.g.,Ni-Cr coatings,aluminide coatings,silicide coatings and MCrAlY(X)coatings,has also been summarized.展开更多
基金supported by the Strategic Priority Research Program of the Chinese Academy of Science(No.XDA02030000)
文摘The fluoride volatility method (FVM) is a technique tailored to separate uranium from fuel salt of molten salt reactors. A key challenge in R&D of the FVM is corrosion due to the presence of molten salt and corrosive gases at high temperature. In this work, a frozen-wall technique was proposed to produce a physical barrier between construction materials and corrosive reactants. The protective performance of the frozen wall against molten salt was assessed using FLiNaK molten salt with introduced fluorine gas, which was regarded as a simulation of the FVM process. SS304, SS316L, Inconel 600 and graphite were chosen as the test samples. The extent of corrosion was characterized by an analysis of weight loss and scanning electron microscope studies. All four test samples suffered severe corrosion in the molten salt phase with the corrosion resistance as: Inconel 600>SS316L>graphite>SS304. The presence of the frozen wall could protect materials against corrosion by molten salt and corrosive gases, and compared with materials exposed to molten salt, the corrosion rates of materials protected by the frozen wall were decreased by at least one order of magnitude.
基金funded by the U.S.Department of Energy,National Energy Technology Laboratory(NETL)under the contract number DE-FE0031548。
文摘Hot corrosion has been extensively observed in various high temperature applications,which might cause large economic losses.To deepen the insight and understanding of hot corrosion,herein,we provide a detailed discussion on hot corrosion induced by molten sulfate salt,in which Na_(2)SO_(4)is the main chemical reactant.The hot corrosion is triggered and sustained by the negative solubility gradient of protective oxide from the oxide/salt interface to salt/gas interface.In this work,we reviewed several key factors,including temperature,gas composition,molten salt composition,alloy element and external stress,influencing the hot corrosion of alloy beneath the molten salt.The application of anti-corrosion coating seems to be the most effective and commercial mothed to mitigate hot corrosion.Therefore,the progress of the development of effective coatings,e.g.,Ni-Cr coatings,aluminide coatings,silicide coatings and MCrAlY(X)coatings,has also been summarized.
