It is well known that nonuniform sampling is usually needed in special signals processing. In this paper, a general method to reconstruct Nth-order periodically nonuniform sampled signals is presented which is also de...It is well known that nonuniform sampling is usually needed in special signals processing. In this paper, a general method to reconstruct Nth-order periodically nonuniform sampled signals is presented which is also developed to digital domain, and the designs of the digital filters and the synthesis system are given. This paper extends the studies of Kohlenberg, whose work concentrate on the periodically nonuniform sampling of second order, as well as the studies of A.J.Coulson, J.L.Brown, whose work deal with the problems of two-band signals’ Nth-order sampling and reconstruction.展开更多
In this paper, we present an interval model of networked control systems with time-varying sampling periods and time-varying network-induced delays and discuss the problem of stability of networked control systems usi...In this paper, we present an interval model of networked control systems with time-varying sampling periods and time-varying network-induced delays and discuss the problem of stability of networked control systems using Lyapunov stability theory. A sufficient stability condition is obtained by solving a set of linear matrix inequalities. In the end, the illustrative example demonstrates the correctness and effectiveness of the proposed approach.展开更多
General Sampling Expansion Reconstruction Method (GSERM) and Digital Spectrum Reconstruction Method (DSRM), which prove effective to reconstruct azimuth signal of Displaced Phase Center Apertures (DPCA) Synthetic Aper...General Sampling Expansion Reconstruction Method (GSERM) and Digital Spectrum Reconstruction Method (DSRM), which prove effective to reconstruct azimuth signal of Displaced Phase Center Apertures (DPCA) Synthetic Aperture Radar (SAR) system from its Periodic Non-Uniform Sampling (PNUS) data sequences, would amplify the noise and sidelobe clutter simultaneously in the reconstruction. This paper formulates the relation of the system transfer matrixes of the above two methods, gives the properties, such as periodicity, symmetry, and time-shift property, of their Noise and Sidelobe Clutter Amplification Factor (NSCAF), and discovers that DSRM is more sensitive than GSERM in the white noise environment. In addition, criteria based on initial sampling point analysis for the robust PRF selection are suggested. Computer simulation results support these con-clusions.展开更多
This paper shows that for DEM simulations of triaxial tests using samples with a grading that is repre- sentative of a real soil, the sample size significantly influences the observed material response. Four DEM sampl...This paper shows that for DEM simulations of triaxial tests using samples with a grading that is repre- sentative of a real soil, the sample size significantly influences the observed material response. Four DEM samples with identical initial states were produced： three cylindrical samples bounded by rigid wails and one bounded by a cubical periodic cell, When subjected to triaxial loading, the samples with rigid boundaries were more dilative, stiffer and reached a higher peak stress ratio than the sample enclosed by periodic boundaries. For the rigid-wall samples, dilatancy increased and stiffness decreased with increasing sample size, The periodic sample was effectively homogeneous, The void ratio increased and the contact density decreased close to the rigid walls, This heterogeneity reduced with increasing sample size. The positions of the critical state lines （CSLs） of the overall response in e-log p＇ space were sensitive to the sample size, although no difference was observed between their slopes. The critical states of the interior regions of the rigid-wall-bounded samples approached that of the homogeneous periodic sample with increasing sample size. The ultimate strength of the material at the critical state is independent of sample size.展开更多
With the emerging migration of automotive and other distributed control platforms from federated to integrated architectures, the need for optimal utilization of ECU （electronic control unit） bandwidth will become a...With the emerging migration of automotive and other distributed control platforms from federated to integrated architectures, the need for optimal utilization of ECU （electronic control unit） bandwidth will become a key requirement in the implementation of embedded control features. This paper advocates the partitioning of the operating space of the plant and the use of minimal sampling rates in each partition without compromising the overall quality of control. At the heart of the proposed methodology are our algorithms that enable the choice of the partitions and the sampling rate for each partition. We demonstrate the efficacy of our methods on two case studies, namely an anti-lock braking system and a lane departure warning system. We also study the use of a supervisory controller that controls the switching among sampling rates for a combination of the two features.展开更多
文摘It is well known that nonuniform sampling is usually needed in special signals processing. In this paper, a general method to reconstruct Nth-order periodically nonuniform sampled signals is presented which is also developed to digital domain, and the designs of the digital filters and the synthesis system are given. This paper extends the studies of Kohlenberg, whose work concentrate on the periodically nonuniform sampling of second order, as well as the studies of A.J.Coulson, J.L.Brown, whose work deal with the problems of two-band signals’ Nth-order sampling and reconstruction.
基金the National Natural Science Foundation of China (No.60674043)
文摘In this paper, we present an interval model of networked control systems with time-varying sampling periods and time-varying network-induced delays and discuss the problem of stability of networked control systems using Lyapunov stability theory. A sufficient stability condition is obtained by solving a set of linear matrix inequalities. In the end, the illustrative example demonstrates the correctness and effectiveness of the proposed approach.
文摘General Sampling Expansion Reconstruction Method (GSERM) and Digital Spectrum Reconstruction Method (DSRM), which prove effective to reconstruct azimuth signal of Displaced Phase Center Apertures (DPCA) Synthetic Aperture Radar (SAR) system from its Periodic Non-Uniform Sampling (PNUS) data sequences, would amplify the noise and sidelobe clutter simultaneously in the reconstruction. This paper formulates the relation of the system transfer matrixes of the above two methods, gives the properties, such as periodicity, symmetry, and time-shift property, of their Noise and Sidelobe Clutter Amplification Factor (NSCAF), and discovers that DSRM is more sensitive than GSERM in the white noise environment. In addition, criteria based on initial sampling point analysis for the robust PRF selection are suggested. Computer simulation results support these con-clusions.
基金funding from the Royal Commission for the Exhibition of 1851provided as part of grant EP/1006761/1 from the Engineering and Physical Sciences Research Council
文摘This paper shows that for DEM simulations of triaxial tests using samples with a grading that is repre- sentative of a real soil, the sample size significantly influences the observed material response. Four DEM samples with identical initial states were produced： three cylindrical samples bounded by rigid wails and one bounded by a cubical periodic cell, When subjected to triaxial loading, the samples with rigid boundaries were more dilative, stiffer and reached a higher peak stress ratio than the sample enclosed by periodic boundaries. For the rigid-wall samples, dilatancy increased and stiffness decreased with increasing sample size, The periodic sample was effectively homogeneous, The void ratio increased and the contact density decreased close to the rigid walls, This heterogeneity reduced with increasing sample size. The positions of the critical state lines （CSLs） of the overall response in e-log p＇ space were sensitive to the sample size, although no difference was observed between their slopes. The critical states of the interior regions of the rigid-wall-bounded samples approached that of the homogeneous periodic sample with increasing sample size. The ultimate strength of the material at the critical state is independent of sample size.
文摘With the emerging migration of automotive and other distributed control platforms from federated to integrated architectures, the need for optimal utilization of ECU （electronic control unit） bandwidth will become a key requirement in the implementation of embedded control features. This paper advocates the partitioning of the operating space of the plant and the use of minimal sampling rates in each partition without compromising the overall quality of control. At the heart of the proposed methodology are our algorithms that enable the choice of the partitions and the sampling rate for each partition. We demonstrate the efficacy of our methods on two case studies, namely an anti-lock braking system and a lane departure warning system. We also study the use of a supervisory controller that controls the switching among sampling rates for a combination of the two features.
