SIGNAL SAMPLING DEPTH-INDUCED SKEW EFFECT IN SIMS DEPTH PROFILING

The effect of signal sampling depth in SIMS on profile was not reported We have found that the maximum sampling depth in SIMS is considerably bigger than the mean penetration range of primary ions and can skew the profile of secondary ion counts for implanted samples on the more deeper direction from the surface. The effect of maximum sampling depth is true not only for implanted samples but also for the samples in the middle of which there is an other impurity-rich layer. The action principle of signal sampling depth effect and the method of decreasing the error produced by the effect are discussed in this

Different mechanisms underlie similar species-area relationships in two tropical archipelagoes

Despite much research in the field of island biogeography,mechanisms regulating insular diversity remain elusive.Here,we aim to explore mechanisms underlying plant species-area relationships in two tropical archipelagoes in the South China Sea.We found positive plant species-area relationships for both coral and continental archipelagoes.However,our results showed that different mechanisms contributed to similar plant species-area relationships between the two archipelagoes.For coral islands,soil nutrients and spatial distance among communities played major roles in shaping plant community structure and species diversity.By contrast,the direct effect of island area,and to a lesser extent,soil nutrients determined plant species richness on continental islands.Intriguingly,increasing soil nutrients availability(N,P,K)had opposite effects on plant diversity between the two archipelagoes.In summary,the habitat quality effect and dispersal limitation are important for regulating plant diversity on coral islands,whereas the passive sampling effect,and to a lesser extent,the habitat quality effect are important for regulating plant diversity on continental islands.More generally,our findings indicate that island plant species-area relationships are outcomes of the interplay of both niche and neutral processes,but the driving mechanisms behind these relationships depends on the type of islands.

Sample size effect on the dynamic torsional behaviour of the 2A12 aluminium alloy

In order to investigate the effect of sample size on the dynamic torsional behaviour of the 2A12 aluminium alloy. In this paper, torsional split Hopkinson bar tests are conducted on this alloy with different sample dimensions. It is found that with the decreasing gauge length and thickness, the tested yield strength increases. However, the sample innerlouter diameter has little effect on the dynamic torsional behaviour. Based on the finite element method, the stress states in the alloy with different sample sizes are analysed. Due to the effect of stress concentration zone （SCZ）, the shorter sample has a higher yield stress. Furthermore, the stress distributes more uniformly in the thinner sample, which leads to the higher tested yield stress. According to the experimental and simulation analysis, some suggestions on choosing the sample size are given as well.

Benchmark Dose Estimation for Cadmium-Induced Renal Effects Based on a Large Sample Population from Five Chinese Provinces

A survey involving 6103 participants from five Chinese provinces was conducted to evaluate the threshold value of urinary cadmium （UCd） for renal dysfunction as benchmark dose low （BMDL）. The urinary N-acetyl-13-D-glucosaminidase （UNAG） was chosen as an effect biomarker. The UCd BMDLs for UNAG ranged from 2.18μg/g creatinine （cr） to 4.26μg/g cr in the populations of different provinces. The selection of the sample population and area affect the evaluation of the BMDL. The reference level of UCd for renal effects was further evaluated based on the data of all 6103 subjects. With benchmark responses （BMR） of 10%/5%, the overall UCd BMDLs for males in the total population were 3.73/2.08 μg/g cr. The BMD was slightly lower in females, thereby indicating that females may be relatively more sensitive to Cd exposure than are males.

SAMPLING PRINCIPLE AND TECHNOLOGY IN WAVELET ANALYSIS FOR SIGNALS

Sampling principle and characteristics and edge effect of orthogonal wavelet transform of signals are researched. Two samples of signals and wavelet bases must be taken in wavelet transform. In the second sample sampling interval or sampling length in different frequency range will be automatically adjusted. Wavelet transform can detect singular points. Both ends of signals are singular points. Edge effect is not avoidable.

Morphological Variation in the Martinican Subspecies White-Breasted Thrasher (<i>Ramphocinclus brachyurus brachyurus</i>)

The White-breasted Thrasher (Ramphocinclus brachyurus) is the smallest passerine bird in the Mimids family. Ranked as “endangered” in the IUCN list, the demographic distribution of this species is spread unevenly across two islands in the Lesser Antilles. The Saint-Lucian subspecies, Ramphocinclus brachyurus sanctaeluciae, was estimated to number between 1200 and 1700 individuals, whereas the Martinique subspecies, Ramphocinclus brachyurus brachyurus, was estimated at between 200 and 400 individuals. As an endemic rare species with a high risk of extinction, the Martinique subspecies should be regarded as a conservation priority. The small size of the Martinique subspecies population, its restricted geographical range, and its narrow habitat tolerance make it quite difficult to study. The variability of morphological traits in this subspecies has not been biostatistically analyzed recently. In order to update knowledge and fill in any gaps, we have used the morphometric approach to study the morphological variability of the Martinique subspecies. The study site is a small peninsula located in the northeast of the island of Martinique (French West Indies) known as “la Caravelle”. We captured 63 White-breasted Thrashers which were marked, measured, and sexed before being released. We did not observe any significant differences between the sexes, signifying an absence of sexual dimorphism. However, we were able to observe a significant variation in morphological traits between individuals measured inside and outside the national protected area of Caravelle. The body mass-tarsus ratio was equal at both sampled sites, something which could potentially be a clue to the bird’s adaptation to different habitats.

Study of Direct Determination of Trace Lanthanum in Biological Samples by ICP－AES Combined with Fluo

A new method for direct determination of lanthanum in solid biological materials by fluorination electrothermal vaporization ICP-AES technique with polytetrafluoroethylene(PTFE) disperser as a fluorination agent has been described. The effect of particle size on the signal intensity of La has been investigated. The vaporization behaviour of lanthanum and the main factors affecting fluorinating vaporization have been observed.Under optimum experimental conditions,the detection limit of La to this method is 2.0 ng/ml,and the RSD is 4.5%.The proposed method has been applied to determining directly trace lanthanum in solid biological standard reference materials without any chemical pretreatment,and the determined values are in good agreement with the certified ones.

Color appearance and visual measurements for color samples with gloss effect

We assess the color appearance of the samples with different inks on glossy substrates, five kinds of paper with different gloss levels. The color samples are measured using spectrophotometers under different illuminating/viewing geometries and visually estimated using the psychophysical method of magnitude estimation. The results of the two approaches are compared through the color appearance model of CIECAM02. The experimental data analysis indicates that the 0/45 and 15/0 geometries can be used to describe the two major aspects of gloss effect, the enlargement of color gamut, and the reduction of lightness. The agreement for hue attribute between instrumental measurement and visual assessment is better than those for colorfulness and lightness.

Representative elementary volume analysis of polydisperse granular packings using discrete element method

The representative elementary volume （REV） for three-dimensional polydisperse granular packings was determined using discrete element method simulations. Granular mixtures of various sizes and particle size distributions were poured into a cuboid chamber and subjected to uniaxial compression, Findings showed that the minimum REV for porosity was larger compared with the REV for parameters such as coordination number, effective elastic modulus, and pressure ratio. The minimum REV for porosity and other parameters was found to equal 15,10, and 5 times the average grain diameter, respectively. A study of the influence of sample size on energy dissipation in random packing of spheres has also confirmed that the REV size is about 15 times the average grain diameter. The heterogeneity of systems was found to have no effect on the REV for the parameters of interest for the narrow range of coefficient of uniformity analyzed in this paper. As the REV approach is commonly applied in both experimental and numerical studies, determining minimum REV size for polydisperse granular packings remains a crucial issue.

Prior-based Bayesian information criterion

We present a new approach to model selection and Bayes factor determination,based on Laplaceexpansions(as in BIC),which we call Prior-based Bayes Information Criterion(PBIC).In thisapproach,the Laplace expansion is only done with the likelihood function,and then a suitableprior distribution is chosen to allow exact computation of the(approximate)marginal likelihoodarising from the Laplace approximation and the prior.The result is a closed-form expression similar to BIC,but now involves a term arising from the prior distribution(which BIC ignores)andalso incorporates the idea that different parameters can have different effective sample sizes(whereas BIC only allows one overall sample size n).We also consider a modification of PBIC whichis more favourable to complex models.