Progress and Problems of Development Research and Application of Sand Barriers

Due to the restrictions on the conditions for afforestation and sand control,the development research,and application of sand barriers have accelerated in recent years,but some problems that cannot be ignored have emerged in practice. In this paper,the functions of wind prevention,sand blocking and fixation,improving soil physical and chemical properties and increasing plant diversity of sand barriers,accretion coefficient and capacity between sand barriers,and mobile sand barriers were analyzed firstly,and then several issues that should be noted in the development and application of sand barriers were proposed. The results show that sand barriers can fix sand on the spot and maintain the stability of sand surface. As an auxiliary measure before afforestation on a mobile sand surface,they are practical and feasible. The biggest drawback of sand barriers is that they are easy to be saturated. Although they can increase plant diversity and surface roughness,they lose the function of blocking sand flow after being saturated,and their function of in-situ sand fixation also rapidly decreases with the degradation of sand barriers. Mobile sand barriers overcome the disadvantage of sand barriers being easy to be saturated to some extent,but the cost greatly increases. In terms of desertification prevention and control by plants,plants are used as sand barriers to study their functions of sand blocking and sand fixation in many researches and practices,but the more important ecological functions of adjusting temperature on sand surface and achieving surface thermodynamic equilibrium of plants are ignored.

Cost analysis of sand barriers in desertified regions based on the land grid division model

Sand barriers are the most widely used mechanical implements for wind-blown sand control and desertification prevention.However,there is no standard quantitative cost analysis of the sizes and materials required for sand barriers.In this study,based on the original land grid division model for optimal resource utilization,we calculated the total side lengths of square and regular hexagonal sand barriers with the sizes of 1.0 m×1.0 m,2.0 m×2.0 m,and 3.0 m×3.0 m in a desertified region of the Shapotou area on the southeastern edge of the Tengger Desert,China.Then,through literature review and social survey,we obtained the material cost and material utilization amount of sand barriers with different materials and sizes.Finally,we calculated the costs of square and regular hexagonal sand barriers comprised of wheat straw,corn stalk,Salix mongolica,poly lactic acid,magnesium cement,and high-density polyethylene,with the sizes of 1.0 m×1.0 m,2.0 m×2.0 m,and 3.0 m×3.0 m.The results show that the material cost of regular hexagonal corn stalk sand barriers with the size of 3.0 m×3.0 m is the lowest,while the material cost of square magnesium cement sand barriers with the size of 1.0 m×1.0 m is the highest.When using the same material,the cost of regular hexagonal sand barriers is lower than that of square sand barriers with the same size.When using the same size,the cost of sand barriers with corn stalk material is lower than that of sand barriers with other materials.Based on the above analysis,we can conclude that the economic benefits of regular hexagonal sand barriers are greater than those of square sand barriers.This study provides a theoretical basis for accurately calculating the material cost of sand barriers,particularly for the estimated cost of mechanized sand barrier engineering projects.

Evolution Characteristics and Development Trends of Sand Barriers

Sand barriers are one of the main measures used to prevent desertification and have been widely used in desertification control. Here, we use bibliometric methods and content analysis to summarize sand barrier type, applications and research. Existing problems in research are pointed out and revolution characteristics and development trends of sand barriers are discussed. We conclude that three main driving factors have stimulated sand barrier study： demand, technology and development concept. Developing environmentally friendly technology and promoting industrialization of sand area economies are future directions for sand barrier research.

Numerical simulation on sand sedimentation and erosion characteristics around HDPE sheet sand barrier under different wind angles

For the safety of railroad operations,sand barriers are utilized to mitigate wind-sand disaster effects.These disasters,characterized by multi-directional wind patterns,result in diverse angles among the barriers.In this study,using numerical simulations,we examined the behavior of High Density Polyethylene(HDPE)sheet sand barriers under different wind angles,focusing on flow field distribution,windproof efficiency,and sedimentation erosion dynamics.This study discovered that at a steady wind speed,airflow velocity varies as the angle between the airflow and the HDPE barrier changes.Specifically,a 90°angle results in the widest low-speed airflow area on the barrier’s downwind side.If the airflow is not perpendicular to the barrier,it prompts a lateral airflow movement which decreases as the angle expands.The windproof efficiency correlates directly with this angle but inversely with the wind’s speed.Notably,with a wind angle of 90°,wind speed drops by 81%.The minimum wind speed is found at 5.1H(the sand barrier height)on the barrier’s downwind side.As the angle grows,the barrier’s windproof efficiency improves,extending its protective reach.Sedimentation is most prominent on the barrier’s downwind side,as the wind angle shifts from 30°to 90°,the sand sedimentation area on the barrier’s downwind side enlarges by 14.8H.As the angle grows,sedimentation intensifies,eventually overtakes the forward erosion and enlarges the sedimentation area.

Sand control effect of HDPE sandbreak nets with different porosity structure

Straw checkerboard sand barriers with a porous structure that consists of a pervious upper portion and a dense lower portion are widely used to achieve great sand control effect.Considering this,and resolving the serious earth surface undercutting problem after HDPE sandbreak net checkboard barriers setting,the authors used HDPE(high-density polyethylene)materials to prepare new sandbreak materials with a similar porous structure.Through wind tunnel simulations and field sand control monitoring,we compared the sand control effect of three HDPE sandbreak nets with different porosity structure.Compared to the sandbreak net with uniform porosity structure,the three types of HDPE sandbreak nets with different porosity structure had poorer effect on reducing sand transport rates,but had longer effective protection distance before sandbreak nets at low wind velocity conditions(<12 m/s),longer effective protection distance at high wind velocity(>14 m/s)and longer effective protection distance between sandbreak nets at all experimental wind velocity conditions.Wind and sand control effect characteristics of HDPE sandbreak nets with different porosity structure provide an ideal material on semiburied checkerboard sand barriers for sand stabilization.By contrast,uniform-type sandbreak nets are used as materials on high upright sand fences for sand blocking.These HDPE sandbreak nets can be used to replace traditional sandbreak materials and have a very high potential for widespread and popular application in aeolian sand disaster control.

Damage by wind-blown sand and its control measures along the Taklimakan Desert Highway in China

Desertification is one of the most serious environmental problems in the world,especially in the arid desert regions.Combating desertification,therefore,is an urgent task on a regional or even global scale.The Taklimakan Desert in China is the second largest mobile desert in the world and has been called the''Dead Sea''due to few organisms can exist in such a harsh environment.The Taklimakan Desert Highway,the longest desert highway(a total length of 446 km)across the mobile desert in the world,was built in the 1990s within the Taklimakan Desert.It has an important strategic significance regarding oil and gas resources exploration and plays a vital role in the socio-economic development of southern Xinjiang,China.However,wind-blow sand seriously damages the smoothness of the desert highway and,in this case,mechanical sand control system(including sand barrier fences and straw checkerboards)was used early in the life of the desert highway to protect the road.Unfortunately,more than 70%of the sand barrier fences and straw checkerboards have lost their functions,and the desert highway has often been buried and frequently blocked since 1999.To solve this problem,a long artificial shelterbelt with the length of 437 km was built along the desert highway since 2000.However,some potential problems still exist for the sustainable development of the desert highway,such as water shortage,strong sandstorms,extreme environmental characteristics and large maintenance costs.The study aims to provide an overview of the damages caused by wind-blown sand and the effects of sand control measures along the Taklimakan Desert Highway.Ultimately,we provide some suggestions for the biological sand control system to ensure the sustainable development of the Taklimakan Desert Highway,such as screening drought-resistant species to reduce the irrigation requirement and ensure the sound development of groundwater,screening halophytes to restore vegetation in the case of soil salinization,and planting cash crops,such as Cistanche,Wolfberry,Apocynum and other cash crops to decrease the high cost of maintenance on highways and shelterbelts.

Sand barrier morphological evolution based on time series remote sensing images:a case study of Anhaiao,Pingtan

The morphological evolution of the sand barrier in the Anhaiao coastal zone of Pingtan from 1996 to 2018 was studied.Tidal correction was used to refine the location of the coastline.A standard deviation ellipse method was applied to further analyze the movement of the barrier head with the axis and rotation angle.A natural neighbor interpolation(NNI)method was carried out to calculate the terrain of the intertidal area,and the erosion and deposition characteristics were illustrated based on the terrain.The results showed that the northern part of the sand barrier facing the lagoon area was deposited over the whole studied period,while erosion has always occurred in the southern part of the sand barrier facing the open sea.The erosion and deposition were slightly different on both sides of the barrier head due to hydrodynamic turbulence.The middle sand barrier moved 102.60 m away from its original location in 1996,and the end of the barrier moved 65.45 m.The head of the sand barrier continued moving 379 m to the northwest.Consequently,the preliminary morphological evolution of the sand barrier corresponding to the distance and direction of movement was detected.

Seedling germination technique of Carex brunnescens and its application in restoration of Maqu degraded alpine grasslands in northwestern China

Carex brunnescens(Pers.)Poir.is considered to be the only clonal herb found to date that can develop and form fixed dunes in Maqu alpine degraded grasslands of northwestern China.However,due to strong dormant characteristics of C.brunnescens seeds,the sand-fixing effect of the plant is severely limited.This study explores a technique that can rapidly promote the seed germination of C.brunnescens,and also investigates the adaptation and sand-fixing effect by cultivating C.brunnescens seedlings to establish living sand barriers in the sand ridges of moving sand dunes.Results show that the seed germination rate obtained a maximum of 63.7%or 65.1%when seeds were treated with 150 mg/L gibberellic acid(GA3)for 24 h followed by soaking in sulfuric acid(98%H2SO4)for 2.5 min or sodium hydroxide(10%NaOH)for 3.5 h,and then germinated(25°C in daytime and 5°C at nighttime)in darkness for 10 d.After breaking seed dormancy of C.brunnescens,the living sand barrier of C.brunnescens(plant spacing 15−20 cm;sand barrier spacing 10−20 m)was established in the perpendicular direction to the main wind in the middle and lower parts of the sand ridges on both sides of the moving sand dunes.When the sand ridges were leveled by wind erosion,the living sand barrier(plant spacing 15−20 cm;sand barrier spacing 0.5−1.0 m)of C.brunnescens was reestablished on the wind-eroded flat ground.Finally,a stable sand-fixing surface can be formed after connecting the living sand barriers on both sides,thus achieving a good sand-fixing effect.These findings suggest that rapid seed germination technology combined with the sand−fixing method of C.brunnescens can shorten the seed germination period and make the seedling establishment become much easier which may be an effective strategy to restore and reconstruct Maqu degraded grasslands.

Coastal evolution of Yancheng, northern Jiangsu, China since the mid-Holocene based on the Landsat MSS imagery

Since the 1970s, remote sensing images have provided new information for the delineation and analysis of coastline changes, especially focusing on the short timescale changes. This paper, based on the Landsat MSS imagery, focuses on the coastline evolution of Yancheng, northern Jiangsu, China since the mid-Holocene. A zebra stripe image, which could reveal the ancient coastal evolution of Yancheng, was extracted from a Landsat MSS image. Based on the extracted black-white stripes, 19 surface sediment samples were recovered and analyzed to recognize the sedimentary characteristics of these stripes. It shows that most sand and silty sand samples appear on the white stripes, while silt and silty clay samples are on the black stripes. Sandy and muddy sediments present an alternating distri- bution pattern on the Yancheng coastal plain. A historical coastline map was drawn according to the previous research achievements of the paleo-coastal sand barriers and paleo-coastlines, and was superimposed on the zebra stripe image. The trend of the extracted zebra stripes is consistent with the historical coastlines, and it should be the symbol of the Yancheng coastline evolution. On the basis of ten sets of black-white stripes and previous research results, we divided the progression of Yancheng coastal evolution into three stages （i.e., the early stable stage （6500 a BP-AD 1128）, the rapid deposition stage （AD 1128-1855） and the adjustment stage （AD 1855-present））. Ten sets of black-white stripes were identified as the characteristic pattern of the coastline evolution on the Yancheng coastal plain.