High-speed train running in the sand environment is different from the general environment. In the former situation, there will be sand load applied on high-speed train(SLAHT) caused by sand particles hitting train su...High-speed train running in the sand environment is different from the general environment. In the former situation, there will be sand load applied on high-speed train(SLAHT) caused by sand particles hitting train surface. This will have a great impact on the train stability, running drag and surface corrosion. Numerical simulation method of SLAHT in sand environment is studied. The velocity and mass flow rate models of saltation and suspension sand particles and the calculation model of SLAHT caused by sand particles hitting train surface are established. The discrete phase method is adopted for numerical simulating the process of saltation and suspension sand particles moving to train surface and generating sand load. By comparison with the field tests, the numerical simulation reliability is analysed. The theoretical formula of SLAHT changing with cross-wind and train speed is proposed. SLAHT changing law is analyzed. Research results indicate that SLAHT changing with cross-wind and train speed is a quadratic relationship. When train speed is constant, SLAHT increases quadratically with cross-wind speed improvement. When cross-wind speed is constant, SLAHT increases quadratically with train speed improvement.展开更多
In order to investigate the influence of the vertical vibration loading on the liquefaction of saturated sand,one dimensional model for the saturated sand with a vertical vibration is presented based on the two phase ...In order to investigate the influence of the vertical vibration loading on the liquefaction of saturated sand,one dimensional model for the saturated sand with a vertical vibration is presented based on the two phase continuous media theory.The development of the liquefaction and the lique- faction region are analyzed.It is shown that the vertical vibration loading could induce liquefaction. The rate of the liquefaction increases with the increase of the initial limit strain or initial porosity or amplitude and frequency of loading,and increases with the decrease of the permeability or initial modulus.It is shown also that there is a phase lag in the sand column.When the sand permeability distribution is non-uniform,the pore pressure and the strain will rise sharply where the permeability is the smallest,and fracture might be induced.With the development of liquefaction,the strength of the soil foundation becomes smaller and smaller.In the limiting case,landslides or debris flows could occur.展开更多
Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure (EPWP) ratio variation with the ratio of...Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure (EPWP) ratio variation with the ratio of the number of cycles are provided. The concept of the EPWP increment ratio is introduced and two new concepts of the effective dynamic shear stress ratio and the log decrement of effective stress are defined. It is found that the development of the EPWP increment ratio can be divided into three stages: descending, stable and ascending. Furthermore, at the stable and ascending stages, a satisfactory linear relationship is obtained between the accumulative EPWP increment ratio and natural logarithm of the effective dynamic shear stress ratio. Accordingly, the EPWP increment ratio at the number of cycles N has been deduced that is proportional to the log decrement of effective stress at the cycle number N-l, but is independent of the cyclic stress amplitude. Based on the analysis, a new EPWP increment model for saturated Nanjing fine sand is developed from tested data fitting, which provides a better prediction of the curves of EPWP generation, the number of cycles required for initial liquefaction and the liquefaction resistance.展开更多
The modified suction caisson(MSC) is a novel type of foundation for ocean engineering, consisting of a short external closed-top cylinder-shaped structure surrounding the upper part of the regular suction caisson(RSC)...The modified suction caisson(MSC) is a novel type of foundation for ocean engineering, consisting of a short external closed-top cylinder-shaped structure surrounding the upper part of the regular suction caisson(RSC). The MSC can provide larger lateral bearing capacity and limit the deflection compared with the RSC. Therefore, the MSC can be much more appropriate to use as an offshore wind turbine foundation. Model tests on the MSC in saturated sand subjected to monotonic lateral loading were carried out to investigate the effects of external structure sizes on the sand surface deformation and the earth pressure distribution along the embedded depth. Test results show that the deformation range of the sand surface increases with the increasing width and length of the external structure. The magnitude of sand upheaval around the MSC is smaller than that of the RSC and the sand upheaval value around the MSC in the loading direction decreases with the increasing external structure dimensions. The net earth pressure in the loading direction acting on the internal compartment of the MSC is smaller than that of the RSC at the same embedded depth. The maximum net earth pressure acting on the external structure outer wall in the loading direction is larger than that of the internal compartment, indicating that a considerable amount of the lateral load and moment is resisted by the external skirt structure.展开更多
In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations amo...In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations among free load swelling rate, non-load time, the proportion of mixed sand and initial dry density. Experimen- tal studies have shown that: Free load swelling deformation is mainly divided into three stages of rapid expan- sion, slow expansion and final stability; when the initial dry density is constant, free load swelling rate of the weathered sand modified soil will reduce rapidly before they slow down with the increase of sand proportion, and weathered sand modified soil free load swelling rate is not sensitive to the large amount of sand mixed; in the same mixed sand ratio, weathered sand modified soil free load swelling rate increases rapidly with the in- crease of initial dry density, there is a good linear correlation between them. To take appropriate control of the initial dry density during the expansive soil subgrade construction helps to reduce its swelling deformation and ensures the stability of the embankment.展开更多
Pavements constructed over loosely compacted subgrades may not possess adequate California bearing ratio (CBR) to meet the requirements of pavement design codes,which may lead to a thicker pavement design for addressi...Pavements constructed over loosely compacted subgrades may not possess adequate California bearing ratio (CBR) to meet the requirements of pavement design codes,which may lead to a thicker pavement design for addressing the required strength.Geosynthetics have been proven to be effective for mitigating the adverse mechanical behaviors of weak soils as integrated constituents of base and sub-base layers in road construction.This study investigated the behaviors of unreinforced and reinforced sand with nonwoven geotextile using repeated CBR loading test (followed by unloading and reloading).The depth and number of geotextile reinforcement layers,as well as the compaction ratio of the soil above and below the reinforcement layer(s) and the compaction ratio of the sand bed,were set as variables in this context.Geotextile layers were placed at upper thickness ratios of 0.3,0.6 and 0.9 and the lower thickness ratio of 0.3.The compaction ratios of the upper layer and the sand bed varied between 85% and 97% to simulate a dense layer on a medium dense sand bed for all unreinforced and reinforced testing scenarios.Repeated CBR loading tests were conducted to the target loads of 100 kgf,150 kgf,200 kgf and 400 kgf,respectively (1 kgf=9.8 N).The results indicated that placing one layer of reinforcement with an upper thickness ratio of 0.3 and compacting the soil above the reinforcement to compaction ratio of 97% significantly reduced the penetration of the CBR piston for all target repeated load levels.However,using two layers of reinforcement sandwiched between two dense soil layers with a compaction ratio of 97% with upper and lower thickness ratios of 0.3 resulted in the lowest penetration.展开更多
文摘High-speed train running in the sand environment is different from the general environment. In the former situation, there will be sand load applied on high-speed train(SLAHT) caused by sand particles hitting train surface. This will have a great impact on the train stability, running drag and surface corrosion. Numerical simulation method of SLAHT in sand environment is studied. The velocity and mass flow rate models of saltation and suspension sand particles and the calculation model of SLAHT caused by sand particles hitting train surface are established. The discrete phase method is adopted for numerical simulating the process of saltation and suspension sand particles moving to train surface and generating sand load. By comparison with the field tests, the numerical simulation reliability is analysed. The theoretical formula of SLAHT changing with cross-wind and train speed is proposed. SLAHT changing law is analyzed. Research results indicate that SLAHT changing with cross-wind and train speed is a quadratic relationship. When train speed is constant, SLAHT increases quadratically with cross-wind speed improvement. When cross-wind speed is constant, SLAHT increases quadratically with train speed improvement.
基金The project supported by the National Natural Science Foundation of China(40025103,10202024)
文摘In order to investigate the influence of the vertical vibration loading on the liquefaction of saturated sand,one dimensional model for the saturated sand with a vertical vibration is presented based on the two phase continuous media theory.The development of the liquefaction and the lique- faction region are analyzed.It is shown that the vertical vibration loading could induce liquefaction. The rate of the liquefaction increases with the increase of the initial limit strain or initial porosity or amplitude and frequency of loading,and increases with the decrease of the permeability or initial modulus.It is shown also that there is a phase lag in the sand column.When the sand permeability distribution is non-uniform,the pore pressure and the strain will rise sharply where the permeability is the smallest,and fracture might be induced.With the development of liquefaction,the strength of the soil foundation becomes smaller and smaller.In the limiting case,landslides or debris flows could occur.
基金Key Research Project of National Natural Science Foundation of China Under Grant No.90715018National Basic Research Program of China Under Grant No.2007CB714200the Special Fund for the Commonweal Industry of China Under Grant No.200808022
文摘Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure (EPWP) ratio variation with the ratio of the number of cycles are provided. The concept of the EPWP increment ratio is introduced and two new concepts of the effective dynamic shear stress ratio and the log decrement of effective stress are defined. It is found that the development of the EPWP increment ratio can be divided into three stages: descending, stable and ascending. Furthermore, at the stable and ascending stages, a satisfactory linear relationship is obtained between the accumulative EPWP increment ratio and natural logarithm of the effective dynamic shear stress ratio. Accordingly, the EPWP increment ratio at the number of cycles N has been deduced that is proportional to the log decrement of effective stress at the cycle number N-l, but is independent of the cyclic stress amplitude. Based on the analysis, a new EPWP increment model for saturated Nanjing fine sand is developed from tested data fitting, which provides a better prediction of the curves of EPWP generation, the number of cycles required for initial liquefaction and the liquefaction resistance.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51639002 and 51379118)the SDUST Research Fund(Grant No.2015KYTD104)
文摘The modified suction caisson(MSC) is a novel type of foundation for ocean engineering, consisting of a short external closed-top cylinder-shaped structure surrounding the upper part of the regular suction caisson(RSC). The MSC can provide larger lateral bearing capacity and limit the deflection compared with the RSC. Therefore, the MSC can be much more appropriate to use as an offshore wind turbine foundation. Model tests on the MSC in saturated sand subjected to monotonic lateral loading were carried out to investigate the effects of external structure sizes on the sand surface deformation and the earth pressure distribution along the embedded depth. Test results show that the deformation range of the sand surface increases with the increasing width and length of the external structure. The magnitude of sand upheaval around the MSC is smaller than that of the RSC and the sand upheaval value around the MSC in the loading direction decreases with the increasing external structure dimensions. The net earth pressure in the loading direction acting on the internal compartment of the MSC is smaller than that of the RSC at the same embedded depth. The maximum net earth pressure acting on the external structure outer wall in the loading direction is larger than that of the internal compartment, indicating that a considerable amount of the lateral load and moment is resisted by the external skirt structure.
文摘In this paper, through the indoor free load swelling rate test, expansive soil in a section of a first- class highway reconstruction project in Yichang City was studied. It emphatically analyzed the interrelations among free load swelling rate, non-load time, the proportion of mixed sand and initial dry density. Experimen- tal studies have shown that: Free load swelling deformation is mainly divided into three stages of rapid expan- sion, slow expansion and final stability; when the initial dry density is constant, free load swelling rate of the weathered sand modified soil will reduce rapidly before they slow down with the increase of sand proportion, and weathered sand modified soil free load swelling rate is not sensitive to the large amount of sand mixed; in the same mixed sand ratio, weathered sand modified soil free load swelling rate increases rapidly with the in- crease of initial dry density, there is a good linear correlation between them. To take appropriate control of the initial dry density during the expansive soil subgrade construction helps to reduce its swelling deformation and ensures the stability of the embankment.
文摘Pavements constructed over loosely compacted subgrades may not possess adequate California bearing ratio (CBR) to meet the requirements of pavement design codes,which may lead to a thicker pavement design for addressing the required strength.Geosynthetics have been proven to be effective for mitigating the adverse mechanical behaviors of weak soils as integrated constituents of base and sub-base layers in road construction.This study investigated the behaviors of unreinforced and reinforced sand with nonwoven geotextile using repeated CBR loading test (followed by unloading and reloading).The depth and number of geotextile reinforcement layers,as well as the compaction ratio of the soil above and below the reinforcement layer(s) and the compaction ratio of the sand bed,were set as variables in this context.Geotextile layers were placed at upper thickness ratios of 0.3,0.6 and 0.9 and the lower thickness ratio of 0.3.The compaction ratios of the upper layer and the sand bed varied between 85% and 97% to simulate a dense layer on a medium dense sand bed for all unreinforced and reinforced testing scenarios.Repeated CBR loading tests were conducted to the target loads of 100 kgf,150 kgf,200 kgf and 400 kgf,respectively (1 kgf=9.8 N).The results indicated that placing one layer of reinforcement with an upper thickness ratio of 0.3 and compacting the soil above the reinforcement to compaction ratio of 97% significantly reduced the penetration of the CBR piston for all target repeated load levels.However,using two layers of reinforcement sandwiched between two dense soil layers with a compaction ratio of 97% with upper and lower thickness ratios of 0.3 resulted in the lowest penetration.