A study of impact of the reclamation and artificial island projects on tidal currents and sediment concentration in radial sand ridge field of the South Yellow Sea

The two-dimensional hydrodynamic model, MIKE21, is applied to simulate the tidal currents and sediment concentration in the radial sand ridges of the South Yellow Sea. Results are in accordance with in situ observations. Then the variations of tidal currents and suspended sediment concentration caused by reclamation and artificial islands projects are simulated. The results show that the impacts are limited around the project areas. After the projects, the fan-shaped, Jianggang centered tidal current pattern would be replaced by a pattern which is formed by two tidal paths. One locates at the Xiyang channel in north-south direction, and the other locates at the Huangshayang channel in east-west direction. The reclamation of Tiaozini separates the waters into south portion and north portion. The changes of sediment concentrations coincide with those of currents. Both the sediment concentrations and tidal currents increase at the northwest of Dongsha and the south of Gaoni, while both decrease at the north and south of Tiaozini, and the east and southwest of Dongsha.

Erosion and erosion-corrosion of Al-brass alloy: Effects of jet velocity, sand concentration and impingement angle on surface roughness

Effects of jet velocity,sand concentration and impingement angle on the surface roughness of Al-brass alloy were investigated after erosion and erosion?corrosion tests.The tests were performed using a jet impingement rig.The eroded surfaces were characterized using2-D and3-D surface profilometery and scanning electron microscopy(SEM).The results showed that there was an increase in the surface roughness of the erosion?corrosion samples as sand concentration was increased to1,5and10g/L at jet velocities of9,6and3m/s,respectively.However,the surface roughness decreased with a further increase in sand concentration.This decrease in the surface roughness was attributed to the higher work hardening of the surface,rebounding or blanketing effect and very high frequency of the impacts at the higher sand concentrations.The surface roughness increased as the jet velocity increased.The results also showed that the change in the surface roughness with impingement angle was not significant at two jet velocities of3and6m/s.However,at a higher jet velocity of9m/s,formation of ripples on the erosion surfaces at oblique angles resulted in a higher surface roughness as compared with the normal impingement angle.

Analysis of mass concentration of atmospheric particulate matter in a sandstorm course and its affecting factors in the Taklimakan Desert

During the course of a major sandstorm from April 17 to April 23, 2008 in the Taklimakan Desert, data pertaining to the mass concentrations of different-sized atmospheric particulate matter were observed continuously with Grimm 1.108, Thermo RP 1400a, TSP, and CAWS-600 instruments. The results showed that： （1） during the entire sandstorm process there were some dif- ferences between the daily mean particle concentration peaks and the hourly mean particle concentration peaks because the actual sandstorm lasted for only about 4 hr, whereas more particles were accumulated in the floating dust days before and after the actual sandstorm; （2） the intensity of the sandstorm was enhanced with the increase of wind speed, and this was related to the peak mass concentrations of atmospheric particulate matter; the wind speed directly affected the concentration of atmospheric particulate matter： the higher the wind speed, the higher the mass concentration （〉0.23 μm was 39,496.5 μg/m^3, and 〉20.0 μm was 5,390.7μg/m^3）; （3） the concentration changes of PM10 and TSP were also related to the course and intensity of the sandstorm; and （4） the mass concentration of atmospheric particulate matter had the following sequence during the dust weather： clear day 〈 floating dust 〈 floating and blowing dust 〈 sandstorm. Temperature, relative humidity, and barometric pressure are important factors affecting the strength of storms, which could also indirectly affect the concentration change of atmospheric particulate matter.

Sand Grain Size and Organic Matter Concentration in the Intertidal Zones on the Southwest Coast of Taiwan

From April 2013 to April 2014, the average pH and water temperature of the Taisi oyster cultivation area (TS, Yunlin County, Taiwan) were 8.05 (7.35 - 8.45) and 24.7˚C (13.7˚C - 32.8˚C) (N = 8226) The average organic matter (OM) concentration at sites TS-A and TS-B were 6.9% ± 1.3% and 6.9% ± 1.2%, and the weight of drift sand was 40.3 ± 19.1 g/d/m2 and 28.5 ± 34.3 g/d/m2 (N = 27). Considerable sand drifting typically occurs during the southwest monsoon season in summer. The average OM concentration at five dunes from Zhuoshui estuary to Zengwun estuary was 23.9 ± 4.5 g/kg. The percentage of sand grain weight of 0.15 - 0.25 mm and 0.25 - 0.60 mm was 82.5% ± 14.2% and 10.5% ± 12.0%. In the spring and autumn of 2015, the average OM concentration at the eight intertidal zones from Hanbao to Cigu was 49.8 ± 34.1 g/kg (N = 177), and the OM concentrations at Huwei estuary and Hanbao and Fangyuan intertidal zones were relatively high. The OM concentration (95.3 ± 75.7 g/kg) of the low tide zone of Huwei estuary was the highest among all tidal zones. The OM concentration during spring (59.4 ± 41.7 g/kg, N = 95) was higher than that in autumn (39.1 ± 17.8 g/kg, N = 84). For sand grain size ranges 0.15 - 0.25 and 0.063 - 0.15 mm, the weight ratio of intertidal sediment was 39.4% ± 26.9% and 27.6% ± 20.1%, respectively. The broad and flat intertidal zone was marked by fine sand and long intertidal zone;the weight ratio of SGSs < 0.25 mm exceeded 65%, and the OM concentration was between 20 and 30 g/kg. Coastal habitat diversity creates differences in biological communities, especially among crabs and benthic organisms. A greater understanding of coastal environments can aid in the management of coastal wetlands.

Stress Concentration around the Embedding of the Honeycomb Sandwich Structure

Honeycomb structures and other sandwich materials are being used as designs which have demanded high-stiffness and lightweight structures. The embedding design can further decrease the total weight of the products. Embedding will inevitably generate defect of the honeycomb and cause stress concentration. This study mainly discusses the tensile stress distribution near the defect in a quantitative way with the finite element and analytical method. The prediction function of the stress distribution is proposed. X and y directional stress distribution properties are found. These results are proved to be validate through a representative defect case. The bending stress distribution is investigated through material mechanics method and the prediction equation of the maximum bending stress is given.

Spatial Variations in Particle Size,Heavy Mineral Assemblage and Magnetic Concentration of Dark-reddish Sands on Cedar Beach,Western Lake Erie,Ontario,Canada

Environmental magnetic research on beaches and shoreline processes is limited.Therefore,we carried out environmental magnetic studies on the heavy mineral-enriched,dark-reddish sands on Cedar Beach of western Lake Erie(41.68°N,82.40°W).Magnetite has been identified as the dominant magnetic mineral of these sands.This study reveals a spatial variation in concentration of magnetite particles,distribution of

Heavy Minerals Concentration in the Beach Sands of the Uae Northern Coastline

The northern section of the UAE is bordered by the Gulf of Oman’s northern extension (East Coast) and Arabian Gulf’s Eastern extension (northern West Coast). Unlike the rest, the coastline of this section is more or less faced by mountainous areas of various rock types. The beach sands a long this coastline at both sides (East and northern-West) signify some heavy minerals concentration of an important consideration.

The impact of salinity,alkalinity and nanoparticle concentration on zeta-potential of sand minerals and their implication on sand production

The effect of brine salinity,cation type,pH,and produced sand on zeta potential(ZP)measurements with and without the presence of silica nanoparticles is investigated through pH measurement,static tests for sand and ZP measurements as well as Field Emission Scanning Electron Microscope(FESEM)analyses.Three important factors were investigated:composition of the injected brine,surface charge and pH.Their influence on stability of nanoparticles in the injected brine and amount of sand segregation was determined and the analysis of the new outcomes based on rock/brine ZP measurements was reported.The results show that the use of silica nanoparticles with high pH helps in preventing sand production and that pH has a main effect on the surface charge of the sand particle released,affecting the ZP of the solution.Nanoparticles can be active as a coating on sand grains and prevent sand segregation during water flooding.Divalent cations have been found to acquire a more substantial impact on neutralizing the negative charge of the sand particles than monovalent cations at the same concentration and pH conditions at 25℃.The value of ZP becomes of higher negative value with the decrease of brine salinity.The effectiveness of SiO_(2)nanoparticles is quite different for soft water and smart water.For soft water,the nanoparticles work more effective at pH higher than 8;and for smart water,the nanoparticles perform better at pH lower than 8.To reduce sand production with the use of silica nanoparticles,it is highly suggested to increase pH,as pH and sand production mechanisms were observed to be inversely related.

Protective benefits of HDPE board sand fences in an environment with variable wind directions on Gobi surfaces:wind tunnel study

The Golmud-Korla Railway in the Gobi area faces operational challenges due to sand hazards,caused by strong and variable winds.This study addresses these challenges by conducting wind tunnel tests to evaluate the protective benefits of High Density Polyethylene(HDPE)board sand fences,focusing on their orientation relative to various wind directions(referred to as'wind angle').This study found that the size of the low-velocity zone on the leeward side of the sand fences(LSF)expanded with an increase in the wind angle(WA).At 1H(the height of the sand fence)and 2H positions on the LSF,the wind speed profiles(WSP)exhibited a segmented logarithmic growth,constrained by Z=H at varying WAs.The efficacy of the sand fence in obstructing airflow escalated as WA increased.The size of the WA has a significant impact on the protective efficiency of HDPE board sand fences.Furthermore,compared to typical sandy surfaces,the rate of sand transport across the Gobi surface diminishes more slowly with height,attributed to the gravel's rebound effect.This phenomenon allows some sand particles to bypass the fences,rendering them less effective at blocking wind and trapping sand than in sandy environments.This paper offers scientific evidence supporting the practical use and enhancement of HDPE board sand fences in varied wind conditions.

Utilizing sediment grain size characteristics to assess the effectiveness of clay–sand barriers in reducing aeolian erosion in Minqin desert area,China

The clay–sand barriers in Minqin desert area,China,represent a pioneering windbreak and sand fixation project with a venerable history of 60 a.However,studies on evaluating the long-term effectiveness of clay–sand barriers against aeolian erosion,particularly from the perspective of surface sediment grain size,are limited and thus insufficient to ascertain the protective impact of these barriers on regional aeolian activities.This study focused on the surface sediments(topsoil of 0–3 cm depth)of clay–sand barriers in Minqin desert area to explain their erosion resistance from the perspective of surface sediment grain size.In March 2023,six clay–sand barrier sampling plots with clay–sand barriers of different deployment durations(1,5,10,20,40,and 60 a)were selected as experimental plots,and one control sampling plot was set in an adjacent mobile sandy area without sand barriers.Surface sediment samples were collected from the topsoil of each sampling plot in the study area in April 2023 and sediment grain size characteristics were analyzed.Results indicated a predominance of fine and medium sands in the surface sediments of the study area.The deployment of clay–sand barriers cultivated a fine quality in grain size composition of the regional surface sediments,increasing the average contents of very fine sand,silt,and clay by 30.82%,417.38%,and 381.52%,respectively.This trend became markedly pronounced a decade after the deployment of clay–sand barriers.The effectiveness of clay–sand barriers in erosion resistance was manifested through reduced wind velocity,the interception of sand flow,and the promotion of fine surface sediment particles.Coarser particles such as medium,coarse,and very coarse sands predominantly accumulated on the external side of the barriers,while finer particles such as fine and very fine sands concentrated in the upwind(northwest)region of the barriers.By contrast,the contents of finest particles such as silt and clay were higher in the downwind(southeast)region of the sampling plots.For the study area,the deployment of clay–sand barriers remains one of the most cost-effective engineering solutions for aeolian erosion control,with sediment grain size parameters serving as quantitative indicators for the assessment of these barriers in combating desertification.The results of this study provide a theoretical foundation for the construction of windbreak and sand fixation systems and the optimization of artificial sand control projects in arid desert areas.

Study of Sands from Bamendou-West Cameroon: Valorization for Concrete Mix Design

Bamendou (West Cameroon), has a huge potential in natural resources, especially sands. However, the use of these materials in civil engineering works leads to the appearance of numerous pathologies which in some cases lead to the total ruin of the works. In order to overcome these infrastructural problems, the main objective of this study is set at the improvement of the service life of structures built in Cameroon using local materials formed under climatic, geological and geotechnical conditions similar to those of materials in Bamendou. Eight sand samples were taken from the most representative and exploited quarries. The identification and classification of the sand taken from the most representative quarries in the study area show that they are mainly clayey, with an average sand equivalent of 57.54. In terms of granulometry, the curves of several sand samples do not fall within the granular range of sands used in the formulation of concrete. The modulus of fineness obtained by particle size analysis varies from 2.91 to 3.92 with an average of 3.31.

Dynamics and genetic regulation of macronutrient concentrations during grain development in maize

Nitrogen(N), phosphorus(P), and potassium(K) are essential macronutrients that are crucial not only for maize growth and development, but also for crop yield and quality. The genetic basis of macronutrient dynamics and accumulation during grain filling in maize remains largely unknown. In this study, we evaluated grain N, P, and K concentrations in 206 recombinant inbred lines generated from a cross of DH1M and T877 at six time points after pollination. We then calculated conditional phenotypic values at different time intervals to explore the dynamic characteristics of the N, P, and K concentrations. Abundant phenotypic variations were observed in the concentrations and net changes of these nutrients. Unconditional quantitative trait locus(QTL) mapping revealed 41 non-redundant QTLs, including 17, 16, and 14 for the N, P, and K concentrations, respectively. Conditional QTL mapping uncovered 39 non-redundant QTLs related to net changes in the N, P, and K concentrations. By combining QTL, gene expression, co-expression analysis, and comparative genomic data, we identified 44, 36, and 44 candidate genes for the N, P, and K concentrations, respectively, including GRMZM2G371058 encoding a Doftype zinc finger DNA-binding family protein, which was associated with the N concentration, and GRMZM2G113967encoding a CBL-interacting protein kinase, which was related to the K concentration. The results deepen our understanding of the genetic factors controlling N, P, and K accumulation during maize grain development and provide valuable genes for the genetic improvement of nutrient concentrations in maize.

Study on the clogging mechanism of punching screen in sand control by the punching structure parameters

As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and gas well.However,most screens only consider the influence of the internal sand retaining medium parameters in the sand control performance design while ignoring the influence of the plugging of the punching screen on the overall sand retaining performance of the screen.To explore the clogging mechanism of the punching screen,this paper established the clogging mechanism calculation model of a single punching screen sand control unit by using the computational fluid mechanics-discrete element method(CFD-DEM)combined method.According to the combined motion of particles and fluids,the influence of the internal flow state on particle motion and accumulation was analyzed.The results showed that(1)the clogging process of the punching sand control unit is divided into three stages:initial clogging,aggravation of clogging and stability of clogging.In the initial stage of blockage,coarse particles form a loose bridge structure,and blockage often occurs preferentially at the streamline gathering place below chamfering inside the sand control unit.In the stage of blockage intensification,the particle mass develops into a relatively complete sand bridge,which develops from both ends of the opening to the center of the opening.In the stable plugging stage,the sand deposits show a“fan shape”and form a“V-shaped”gully inside the punching slot element.(2)Under a certain reservoir particle-size distribution,The slit length and opening height have a large influence on the permeability and blockage rate,while the slit width size has little influence on the permeability and blockage rate.The microscopic clogging mechanism and its law of the punching screen prevention unit are proposed in this study,which has some field guidance significance for the design of punching screen and sand prevention selection.

Distribution, health and ecological risk assessments of trace elements in Nigerian oil sands

The Nigerian oil sands represent the largest oil sand deposit in Africa, yet there is little published information on the distribution and potential health and ecological risks of trace elements in the oil resource. In the present study, we investigated the distribution pattern of 18trace elements(including biophile and chalcophile elements) as well as the estimated risks associated with exposure to these elements. The results of the study indicated that Fe was the most abundant element, with a mean concentration of 22,131 mg/kg while Br had the lowest mean concentration of 48 mg/kg. The high occurrence of Fe and Ti suggested a possible occurrence of ilmenite(Fe TiO_(3)) in the oil sands. Source apportionment using positive matrix factorization showed that the possible sources of detected elements in the oil sands were geogenic, metal production, and crustal. The contamination factor, geo-accumulation index, modified degree of contamination, pollution load index, and Nemerow pollution index indicated that the oil sands are heavily polluted by the elements. Health risk assessment showed that children were relatively more susceptible to the potentially toxic elements in the oil sands principally via ingestion exposure route(HQ > 1E-04). Cancer risks from inhalation are unlikely due to CR < 1E-06 but ingestion and dermal contact pose severe risks(CR > 1E-04). The high concentrations of the elements pose serious threats due to the potential for atmospheric transport, bioaccessibility, and bioavailability.

New Data on Coal, Gypsum, Iron and Silica Sand Deposits and Geochemical Exploration (Pakistan): Revision of 25 Years History of Dinosaur Discoveries from Pakistan

Discoveries of many coal seams at depths by drilling carried by Geological Survey of Pakistan in Sor Range and Harnai Gochina, extended the coal seams at depth which is challenge for mine owners to exploit feasibly. Bed to bed gypsum samplings (and their chemical analyses) of huge gypsum deposits from Sulaiman foldbelt is a base for industrialist and also planers to develop cement and gypsum industries to increase export and foreign exchange for the development of area and Pakistan. Low and high grade sedimentary iron deposits, silica sand and uranium host rocks and their extensions in Sulaiman and Kirthar foldbelts are presented. Anomalies of a few base metals arise as a result of geochemical exploration carried at part of Loralai District of Balochistan. Theropod dinosaurs were frequent in India, while Poripuchian titanosaurs (Sauropoda, Dinosauria) were frequent in Pakistan. Besides some ichnotaxa, many bone taxa such as 1 titanosauriform, 14 titanosaurian sauropod (including one new titanosaur), and 3 theropod dinosaurs are established from Pakistan. Among these 12 titanosaur species and 3 theropod species are named in about 10 km2 area of Vitakri dome and 2 titanosaur species are named in about a few hundred square meter area of Mari Bohri (Kachi Bohri) which is about 10 km westward from Vitakri dome. Pakistan is a unique country which discoverd 14 diversified titanosaurs in a short area and also in a short period (67 - 66 million years ago/Ma). About 400 bones found from a few meter thick upper part of upper shale horizon of latest Maastrichtian Vitakri Formation which is base for titanosaur taxa. Cranial material is in low fraction (but include significant diverse snouts), caudal vertebrae are prominent, the cervicals, dorsals and sacrals have significant numbers, forelimb and hind limb bones have balanced fraction. Humeri, femora and tibiae are most common. To know the position of Pakistani titanosaurs among titanosaurs and sauropods, there is a need to extend list of characters for phylogenetic analyses. This broad feature list should include main characters of titanosaurs from Pakistan and also from global world.

Concentrations of foliar and surface soil in nutrients Pinus spp. plantations in relation to species and stand age in Zhanggutai sandy land, northeast China

The concentrations of the foliar and surface soil nutrients and the variation with species and stand age were studied inPinus spp. plantations in Zhanggutai area, northeast China. The results showed that the total N, total P and C: N ratio of the soil inP. sylvestris var.mongolica stands were significantly higher in comparison with those inP. tabulaeformis andP. densiflora stands. ForP. sylvestris var.mongolica, the foliar P concentration appeared to decrease with age, and the foliar N and K concentrations did not show a consistent change with age. As for the different tree species of the similar age, the foliar N and P concentrations were significantly different (p<0.05), being withP. sylvestris var.mongolica>P. densiflora>P. tabulaeformis. The foliar N: P ratio ofP. densiflora significantly was higher thanP. sylvestris var.mongolica andP. tabulaeformis, while the foliar K was no obvious difference between the three tree species. There were significant correlation (p<0.05) between soil total N and P, soil organic matter and total P, foliar N and P, but it did not show significant correlations between soil and foliar nutrient concentrations, which might attribute to the excessive litter raking, overgrazing and low soil moisture in this area. Based on the foliar N: P ratio, we introduced a combination threshold index of N: P ratio with their absolute foliar nutrient concentrations to determine the possible limiting nutrient. According to the critical N: P ratio and their absolute foliar N, P concentrations, theP. sylvestris var.mongolica stands showed a decreased N limitation degree with age, theP. densiflora stands showed unlimited by N and P in the whole, and theP. tabulaeformis stands showed co-limited by N and P. No significant difference in soil nutrient concentrations of the surface soils was found between 45, 29, 20-yr-oldPinus sylvestris var.mongolica plantation stands. Keywords coniferous trees - foliar nutrient concentration - limiting nutrients - N - P ratio - Zhanggutai sandy land CLC number S718.55 Document code A Article ID 1007-662X(2004)01-0011-08 Foundation item: This research was supported by Key Knowledge Innovation Project (KZCX3-SW-418) of Chinese Academy of Sciences.Biography: CHEN Guang-sheng (1978-), male, master candidate in Institute of Applied Ecology, Chinese Academy of Sciences, Shenyang 110016, P. R. ChinaResponsible editor: Song Funan

An Investigation into the Compressive Strength,Permeability and Microstructure of Quartzite-Rock-Sand Mortar

River sand is an essential component used as a fine aggregate in mortar and concrete.Due to unrestrained exploitation,river sand resources are gradually being exhausted.This requires alternative solutions.This study deals with the properties of cement mortar containing different levels of manufactured sand(MS)based on quartzite,used to replace river sand.The river sand was replaced at 20%,40%,60%and 80%with MS(by weight or volume).The mechanical properties,transfer properties,and microstructure were examined and compared to a control group to study the impact of the replacement level.The results indicate that the compressive strength can be improved by increasing such a level.The strength was improved by 35.1%and 45.5%over that of the control mortar at replacement levels of 60%and 80%,respectively.Although there was a weak link between porosity and gas permeability in the mortars with manufactured sand,the gas permeability decreased with growing the replacement level.The microstructure of the MS mortar was denser,and the cement paste had fewer microcracks with increasing the replacement level.

Fungi Associated with Sand and Plants from Marine Coastlines: Potential Relevance for Human Health

The fungal community associated with beach sand and plants located along marine coasts are an under-studied area of research despite its potential relevance to human health. In this study, we isolated and identified the cultivable mycobiota associated with sand and plants collected along the coast of Gran Canaria (Spain) using culture-dependent and -independent methods. Clinically relevant species belonging to Cryptococcus spp. and related genera such as Naganishia and Papilotrema were isolated and identified from shoreline plants. Moreover, Candida tropicalis was isolated from beach sand, and Aspergillus fumigatus and Aspergillus terreus strains were associated with both types of samples (i.e., plants and beach sand). We conclude that beach sand and shoreline plants are potential reservoirs of fungi of high clinical interest. We recommend including beach sand and plants from the environment when assessing the quality of marine coastal systems. Our results open a framework for studying the natural marine environment and its role in the epidemiology of infectious diseases in order to more accurately manage public health.

Formation and ecological response of sand patches in the protection system of Shapotou section of the Baotou-Lanzhou railway,China

The development of bare patches typically signifies a process of ecosystem degradation.Within the protection system of Shapotou section of the Baotou-Lanzhou railway,the extensive emergence of bare sand patches poses a threat to both stability and sustainability.However,there is limited knowledge regarding the morphology,dynamic changes,and ecological responses associated with these sand patches.Therefore,we analyzed the formation and development process of sand patches within the protection system and its effects on herbaceous vegetation growth and soil nutrients through field observation,survey,and indoor analysis methods.The results showed that sand patch development can be divided into three stages,i.e.,formation,expansion,and stabilization,which correspond to the initial,actively developing,and semi-fixed sand patches,respectively.The average dimensions of all sand patch erosional areas were found to be 7.72 m in length,3.91 m in width,and 0.32 m in depth.The actively developing sand patches were the largest,and the initial sand patches were the smallest.Throughout the stage of formation and expansion,the herbaceous community composition changed,and the plant density decreased by more than 50.95%.Moreover,the coverage and height of herbaceous plants decreased in the erosional area and slightly increased in the depositional lobe;and the fine particles and nutrients of soils in the erosional area and depositional lobe showed a decreasing trend.In the stabilization phases of sand patches,the area from the inlet to the bottom of sand patches becomes initially covered with crusts.Vegetation and 0-2 cm surface soil condition improved in the erosional area,but this improvement was not yet evident in the depositional lobe.Factors such as disturbance,climate change,and surface resistance to erosion exert notable influences on the formation and dynamics of sand patches.The results can provide evidence for the future treatment of sand patches and the management of the protection system of Shapotou section of the Baotou-Lanzhou railway.

Particle size characterization and sources of sediments in the Uzhumqin sand dunes

Sediment constitutes the fundamental basis for forming and evolving aeolian geomorphology.The characteristics of sediment particle size offer insights into the development and evolution of sandy terrain,making their study critical to understanding aeolian geomorphology and sand control.In this study,we combined high-density collection of surface sediments in the Uzhumqin sand dunes and GIS spatial analysis to analyze the particle size parameters and changes in the spatial distribution of surface sediments in this region.In addition,we used an end-member analysis to identify the potential sources of the sediments.The results showed that surface sediments in the Uzhumqin sand dunes had distinct spatial distributions.Medium and coarse grain sands dominated the sediments in the dunes,and the mean grain size and the sorting coefficient generally increased along the prevailing wind direction,with high values in individual areas related to factors such as material sources and vegetation cover.Skewness was strongly influenced by factors such as landform change and human activity,and spatial variability became more complex.Kurtosis and the soil fractal dimension showed generally decreasing trends along the prevailing wind direction.With dune fixation,the contents of clay and powder particles in the soil increased;the mean particle size,the sorting coefficient,and the fractal dimension of the soil gradually increased,and the skewness and kurtosis gradually decreased.The end-member analysis results indicated the existence of five end-members(EM)in the dune sediments.EM 1 was a mixed component of wind-deposited fine sands and nearby fluvial sediments.EM 2 was the main component of sediments in the study area and was the result of sorting lake sediments by wind action and by the local topography.EM 3 may be a product of river flood deposition.EM 4 and EM 5 had coarser grain sizes.EM 4 was a lake-phase sediment product influenced by topographic and vegetation cover factors,and EM 5 was primarily a river and lake sediment product modified by weathering.The sediment particle size results from the study area indicate that the sediment in the sandy region is generally coarse due to multiple factors,including topography,climate,hydrology,and human activity.Sandy material in the study area originated from nearby,with very little sand being transported from long distances.