Quantitative characterization of tight gas sandstone reservoirs using seismic data via an integrated rock-physics-based framework

Seismic characterizing of tight gas sandstone (TGS) reservoirs is essential for identifying promising gas-bearing regions. However, exploring the petrophysical significance of seismic-inverted elastic properties is challenging due to the complex microstructures in TGSs. Meanwhile, interbedded structures of sandstone and mudstone intensify the difficulty in accurately extracting the crucial tight sandstone properties. An integrated rock-physics-based framework is proposed to estimate the reservoir quality of TGSs from seismic data. TGSs with complex pore structures are modeled using the double-porosity model, providing a practical tool to compute rock physics templates for reservoir parameter estimation. The VP/VS ratio is utilized to predict the cumulative thickness of the TGS reservoirs within the target range via the threshold value evaluated from wireline logs for lithology discrimination. This approach also facilitates better capturing the elastic properties of the TGSs for quantitative seismic interpretation. Total porosity is estimated from P-wave impedance using the correlation obtained based on wireline log analysis. After that, the three-dimensional rock-physics templates integrated with the estimated total porosity are constructed to interpret microfracture porosity and gas saturation from velocity ratio and bulk modulus. The integrated framework can optimally estimate the parameters dominating the reservoir quality. The results of the indicator proposed based on the obtained parameters are in good agreement with the gas productions and can be utilized to predict promising TGS reservoirs. Moreover, the results suggest that considering microfracture porosity allows a more accurate prediction of high-quality reservoirs, further validating the applicability of the proposed method in the studied region.

Depositional and Diagenetic Controls on Sandstone Reservoirs with Low Porosity and Low Permeability in the Eastern Sulige Gas Field, China

In order to determine the genesis and the factors that control the low-porosity and low- permeability sandstone reservoirs in the eastern Sulige Gas Field in the Ordos Basin, systematic studies on the sedimentary facies and diagenesis were conducted by means of analysis of cores, thin sections, fluid inclusions, X-ray diffraction, cathode luminescence and scanning electron microscope. It was found that the sand bodies of the major gas reservoirs in the Shan1 section （P1S1） and the He8 section （P2H8） were formed during the Permian as sedimentary facies such as braided-channel bars, braided-river channels and point bars of a meandering river. Four types of diagenetic facies developed subsequently： in order from the best to the poorest properties these are type A （weak compaction, early calcite cement-chlorite film facies）, type B （moderate compaction, quartz overgrowth-feldspar corrosion-kaolinite filling facies）, type C （strong compaction, late calcite cement-quartz corrosion facies） and type D （matrix filling and strong compaction facies）. This diagenesis is undoubtedly the main reason for the poor reservoir properties of sandstone reservoirs, but the sedimentary facies are the underlying factors that greatly affect the diagenesis and thus the reservoir performance. Favorable diagenetic facies developed mainly in relatively small lithofacies such as braided-river channels, channel bars and point bars. The vertical distribution of the physical properties and the diagenetic facies of the reservoirs are related to the stratigraphic succession. Most of the sandstones between mudstones and thin beds of sandstone are unfavorable diagenetic facies. Analyses indicate that siliceous cementation can hardly be stopped by hydrocarbon filling. Authigenic chlorite could hardly protect the primary porosity. It not only occupies pore space, but also blocks pathways through sandstone reservoirs, so that it has significant influence on the permeability. Authigenic chlorite cannot be used as a marker for a specific sedimentary facies because it can be formed in different sedimentary facies, but it indicates high hydrodynamic conditions and presence of favorable reservoirs.

K-Ar Dating of Authigenic Illites and Its Applications to the Study of Hydrocarbon Charging Histories of Typical Sandstone Reservoirs in Tarim Basin, China

The Tarim Basin in China comprises eight sets of sandstone reservoirs, five of which are investigated in detail in this study. The main purpose of this study is to investigate the hydrocarbon charging histories of reservoirs by applying K-Ar dating of authigenic illites. The ages of authigenic illites from the Lower Silurian bituminous sandstones in the Central Uplift area range from 383.5 to 235.2 Ma, suggesting that the Silurian oil accumulations were formed from the late Caledonian till the late Hercynian. The ages of authigenic illites from the Upper Devonian Donghe Sandstone reservoirs range from 263.8 to 231.3 Ma, indicating that hydrocarbon accumulations within the Donghe sandstone were formed mainly in the late Hercynian. The authigenic illites ages from the Lower Jurassic Yangxia Group sandstones in the Yinan-2 gas reservoir (Yinan-2, Kuqa Depression) range from 28.1 to 23.9 Ma, suggesting that the initial hydrocarbon charging occurred in the Miocene. The ages of the authigenic illites from the Lower Cretaceous sandstones in the Akemomu gas field (Ake-1, Kashi Sag, Southwest Depression) range from 22.6 to 18.8 Ma, indicating a probable early oil accumulation or early migration of hydrocarbon within this area. The illites from the Paleogene sandstones in the Dina-2 gas reservoir (Dina-201, Kuqa Depression) have a detrital origin; they cannot be used to study the hydrocarbon charging histories. The ages of authigenic illites in the underlying Cretaceous sandstones in the same well (Dina-201) range from 25.5 to 15.5 Ma, indicating that hydrocarbon charging in this reservoir probably occurred within the Miocene. This study highlights the potential of applying K-Ar dating of authigenic illites to investigate the timing of hydrocarbon charging histories of the Tarim Basin reservoir sandstones.

Three-Dimensional Modelling of a Multi-Layer Sandstone Reservoir： the Sebei Gas Field, China

Multi-layer sandstone reservoirs occur globally and are currently in international production. The 3D characteristics of these reservoirs are too complicated to be accurately delineated by general structural-facies-reservoir modelling. In view of the special geological features, such as the vertical architecture of sandstone and mudstone interbeds, the lateral stable sedimentation and the strong heterogeneity of reservoir poroperm and fluid distribution, we developed a new three-stage and six-phase procedure for 3D characterization of multi-layer sandstone reservoirs. The procedure comprises two-phase structural modelling, two-phase facies modelling and modelling of two types of reservoir properties. Using this procedure, we established models of the formation structure, sand body structure and microfacies, reservoir facies and properties including porosity, permeability and gas saturation and provided a 3D fine-scale, systematic characterization of the Sebei multi-layer sandstone gas field, China. This new procedure, validated by the Sebei gas field, can be applied to characterize similar multi-layer sandstone reservoirs.

Sweet spot prediction in tight sandstone reservoir based on well-bore rock physical simulation

To establish the relationship among reservoir characteristics and rock physical parameters,we construct the well-bore rock physical models firstly,considering the influence factors,such as mineral composition,shale content,porosity,fluid type and saturation.Then with analyzing the change rules of elastic parameters along with the above influence factors and the cross-plots among elastic parameters,the sensitive elastic parameters of tight sandstone reservoir are determined,and the rock physics template of sweet spot is constructed to guide pre-stack seismic inversion.The results show that velocity ratio and Poisson impedance are the most sensitive elastic parameters to indicate the lithologic and gas-bearing properties of sweet spot in tight sandstone reservoir.The high-quality sweet spot is characterized by the lower velocity ratio and Poisson impedance.Finally,the actual seismic data are selected to predict the sweet spots in tight sandstone gas reservoirs,so as to verify the validity of the rock physical simulation results.The significant consistency between the relative logging curves and inversion results in different wells implies that the utilization of well-bore rock physical simulation can guide the prediction of sweet spot in tight sandstone gas reservoirs.

Evaluation and prevention of formation damage in offshore sandstone reservoirs in China

Reduction in water injectivity would be harmful to the waterflood development of offshore sandstone oil reservoirs. In this paper the magnitude of formation damage during water injection was evaluated by analyzing the performance of water injection in the Bohai offshore oilfield, China. Two parameters, permeability reduction and rate of wellhead pressure rise, were proposed to evaluate the formation damage around injection wells. The pressure performance curve could be divided into three stages with different characteristics. Analysis of field data shows that formation damage caused by water injection was severe in some wells in the Bohai offshore oilfield, China. In the laboratory, the content of clay minerals in reservoir rock was analyzed and sensitivity tests （including sensitivity to water, ftow rate, alkali, salt and acid） were also conducted. Experimental results show that the reservoir had a strong to medium sensitivity to water （i.e. clay swelling） and a strong to medium sensitivity to flow rate, which may cause formation damage. For formation damage prevention, three injection schemes of clay stabilizer （CS） were studied, i.e. continuous injection of low concentration CS （CI）, slug injection of high concentration CS （SI）, and slug injection of high concentration CS followed by continuous injection of low concentration CS （SI-CI）. Core flooding experiments show that SI-CI is an effective scheme to prevent formation damage and is recommended for the sandstone oil reservoirs in the Bohai offshore oilfield during water injection.

Numerical modelling of the dynamic process of oil displacement by water in sandstone reservoirs with random pore structures

The study aims to identify a suitable site for open and bore well in a farmhouseusing ground magnetic survey in south India.It also aims to define depth to granitoid and structural elements which traverse the selected area.Magnetic data(n=84)measured,processed and interpreted as qualitative and quantitatively.The results of total magnetic intensities indicate that the area is composed of linear magnetic lows trending NE-SW direction and circular to semi-circular causative bodies.The magnetic values ranged from-137 nT to 2345 nT with a mean of 465 nT.Reduction to equator shows significant shifting of causative bodies in the southern and northern directions.Analytical signal map shows exact boundary of granitic bodies.Cosine directional filter has brought out structural element trending NE-SW direction.Results of individual profile brought to light structurally weak zone between 90 m and 100 m in all the profile lines.Sudden decrease of magnetic values from 2042 nT to 126 nT noticed in profile line 6 between 20 m and 30 m indicates fault occurrence.Magnetic breaks obtained from these maps were visualized,interpreted and identified two suitable sites for open and bore well.Radially averaged power spectrum estimates depth of shallow and deep sources in 5 m and 50 m,respectively.Euler method has also been applied to estimate depth of granitoid and structural elements using structural indexes 0,1,2,and 3 and found depth ranges from<10 m to>90 m.Study indicates magnetic method is one of the geophysical methods suitable for groundwater exploration and site selection for open and borewells.

Tight sandstone reservoir sensitivity and damage mechanism analysis: A case study from Ordos Basin, China and implications for reservoir damage prevention

Analysis of reservoir sensitivity to velocity,water,salt,acid,alkali and stress is critical for reservoir protection.To study the tight sandstone reservoir sensitivity at different formation depths(effective stress)and formation water conditions(pH,salinity,and fluid velocity),a series of dynamic core flow tests under different pH,salinity,acid,and effective stress conditions were performed on samples from tight sandstone reservoirs of the Upper Triassic Yanchang 8(T_(3)y^(8))Member and conventional reservoirs of the Middle-Lower Jurassic Yan'an 9(J_(1-2)y^(9))Member in the Ordos Basin.The results indicate that,compared with the conventional reservoirs,the tight sandstone reservoirs are more sensitive to velocity and stress,less sensitive to water,alkali and salinity,and respond better to acid fracturing.In addition,the critical conditions(salinity,velocity,pH,and stress)for pumping drilling,completion,and fracturing fluids into tight sandstone reservoirs were investigated.A combination of scanning electron microscopy coupled with energy-dispersive spectrometry(SEM-EDS),cathodoluminescence(CL),casting thin section(CTS)and nuclear magnetic resonance(NMR)images,high-pressure mercury injection capillary pressure(MICP)measurements as well as X-ray fluorescence spectral(XRF)analyses were employed to analyze the damage mechanisms of the conventional reservoirs(J_(1-2)y^(9))and tight sandstone reservoirs(T_(3)y^(8))caused by fluid invasion.The results suggest that reservoir sensitivity is primarily conditioned by the composition of detrital components and interstitial fillings,petrophysical properties,pore-throat structure,and diagenetic facies.All these factors control the sensitivity types and extent of the reser-voirs.Our results indicate that the poorer the reservoir physical properties,the stronger the reservoir heterogeneity and sensitivity,implying that tight sandstone reservoirs are more susceptible to changes in fluids than conventional reservoirs.This study offers insights into the reservoir damage types and helps to improve the design and implementation of protection measures for tight sandstone reservoir exploration.

Mapping of thin sandstone reservoirs in bisol field, Niger delta, Nigeria using spectral decomposition technique

This study focuses on using spectral decomposition(SD)technique to characterize complicated reservoirs to understand the structural and stratigraphic variations in the interpreted horizons from Bisol field.The purpose of this study is to use geophysical and well logging data sets to map the thin-bedded sandstone reservoirs and prospect zones within the multiple reservoirs in Bisol field,Niger Delta.The interpretation of faults and horizons was carried out on the seismic section,which was further used to produce the structural maps.Seismic attributes such as trace and variance were used to enhance the truncated structures from the seismic section,while the produced spectra were used to delineate the stratigraphy and thickness of the thin-bedded reservoirs.Thin sandstone reservoirs were identified from well logs and consequently mapped on the seismic section.Fast Fourier Transform workflow was successfully used to image the stratigraphic features in the study area.Three horizons(S1T,S2T and S3T)were delineated from the seismic section,and four reservoirs were mapped and correlated across the wells.Frequency analyses from the seismic sectional view revealed some thin pay sandstone reservoirs,which were characterized by high amplitude.Three new probable zones(Prospect A,B and C)of hydrocarbon accumulation were identified using the SD technique.

4D-stress evolution of tight sandstone reservoir during horizontal wells injection and production: A case study of Yuan 284 block,Ordos Basin,NW China

To investigate the 4D stress change during injection and production in tight sandstone reservoirs, a multi-physical fields modeling method is proposed considering the reservoir heterogeneity, hydraulic fracture and complex injection-production system. The 4D stress evolution of tight sandstone reservoir in Yuan 284 block of Huaqing oilfield, Ordos Basin,during injection-production in horizontal well network is investigated by modeling coupled flow and geomechanics. Results show:(1) Induced by injection and production, the 3D stress increases near the injectors but decreases near the producers, and the horizontal stresses are distributed in obvious strips along their respective stress directions.(2) The horizontal stress difference is the highest at the horizontal wellbore beside injectors during injection and production, while it is the lowest in undeveloped zone between the injectors, and the orientation of maximum horizontal principal stress changes the most near the injectors, which is distributed radially.(3) The hydraulic fracture in re-fracturing well was observed to be asymmetrical in geometry and deflected as the stress changed. The results provide theoretical guidance for horizantal well network modification and re-fracturing optimization design in tight sandstone reservoir.

Synchronous injection-production energy replenishment for a horizontal well in an ultra-low permeability sandstone reservoir: A case study of Changqing oilfield in Ordos Basin, NW China

It is difficult to build an effective water flooding displacement pressure system in the middle section of a horizontal well in an ultra-low permeability sandstone reservoir.To solve this problem,this study proposes to use packers,sealing cannula and other tools in the same horizontal well to inject water in some fractures and produce oil from other fractures.This new energy supplement method forms a segmental synchronous injection-production system in a horizontal well.The method can reduce the distance between the injection end and the production end,and quickly establish an effective displacement system.Changing the displacement between wells to displacement between horizontal well sections,and point water flooding to linear uniform water flooding,the method can enhance water sweeping volume and shorten waterflooding response period.The research shows that:(1)In the synchronous injection and production of horizontal well in an ultra-low-permeability sandstone reservoir,the water injection section should select the section where the natural fractures and artificial fractures are in the same direction or the section with no natural fractures,and the space between two sections should be 60?80 m.(2)In addition to controlling injection pressure,periodic water injection can be taken to reduce the risk of re-opening and growth of natural fractures or formation fracture caused by the gradual increase of water injection pressure with water injection going on.(3)Field tests have verified that this method can effectively improve the output of single well and achieve good economic benefits,so it can be widely used in the development of ultra-low permeability sandstone reservoirs.

Characterization of favorable lithofacies in tight sandstone reservoirs and its significance for gas exploration and exploitation: A case study of the 2nd Member of Triassic Xujiahe Formation in the Xinchang area, Sichuan Basin

By using core,logging curves,and experiment data,favorable lithofacies types in the 2 nd Member of Triassic Xujiahe Formation in the Xinchang area,Sichuan Basin were classified,standard of the favorable lithofacies was established,planar distribution regularities of the favorable lithofacies were identified,and forming mechanisms of the favorable lithofacies and their control effect on production were examined.(1)The 2 nd Member of Xujiahe Formation has twelve types of lithofacies,among which multiple layer medium-coarse grain sandstone lithofacies,parallel bedding medium-coarse grain sandstone lithofacies,massive bedding medium-coarse grain sandstone lithofacies,inclined bedding medium-coarse grain sandstone lithofacies,and charcoal-bearing medium-coarse grain sandstone lithofacies with better physical properties and higher gas content are favorable lithofacies;they feature low gamma,low neutron porosity,low resistivity,and high acoustic travel time on logging curves.(2)The sedimentary process controls spatial distribution of sand bodies which are the material basis of the favorable lithofacies;post diagenetic fluids would differentially reconstruct the favorable lithofacies;tectonic activities and abnormal formation pressure made strata slide along the weakness plane,giving rise to fractures in different types of rocks,which can enhance the reservoir permeability significantly.(3)The development degree of favorable lithofacies is a major factor affecting stable production of gas well.

Quantitative Characterization of Interlayer Interference in Multi-Layered Sandstone Reservoirs Offshore China

X oilfield is a typical multi-layer sandstone reservoir in offshore China. In the early stage, in order to obtain economic oil production, directional well was used to adopt a set of multi-layer combined production, which resulted in serious interlayer interference, water injection inrush and low reserve utilization. Based on the theory of single-phase unstable seepage flow and the theory of oil-water two-phase non-piston displacement, the author innovatively established a mathematical model of interlayer dynamic interference in multilayer sandstone reservoirs, revealed the influence law of main controlling factors such as permeability, viscosity, starting pressure gradient and reservoir type on interlayer interference, and innovatively formed a quantitative characterization theory of interlayer interference in multilayer combined oil production. The technical demarcation of offshore multi-zone combined oil production reservoir system is formulated and the recombination of oil field development system is guided.

Physical properties of sandstone reservoirs: Implication for fluid mobility

Core samples representing depths of hydrocarbon-bearing zones are not readily accessible for reservoir evaluations.On the other hand,wireline logs with incorporated seismic data,which can be archived over a more extended period while retaining their original forms,are typically more available for research purposes.Therefore,the study relies on wireline logs with seismic data to predict the reservoirs'fluid mobility by evaluating the hydraulic(flow)units,reservoir depths,fluid saturations,and geothermal gradients.It also indicates the associated water cut(C_(w))within Ritchie oil and gas field,Niger Delta considering a three-phase(oil-gas-water-bearing)reservoir(R_(A))and an oil-saturated reservoir(R_(B))delineated across three wells(R_(W1),R_(W2) and R_(W3)).Research activities combining the presented factors to achieve the stated objectives are not quite common within the study location.It shows lower,average and upper limits of the flow unit factors and irreducible water saturation(S_(wirr))within the reservoirs.The study shows the relationship between hydraulic units/fluid saturations and fluid mobility/associated C_(w) within the sandstone reservoirs.It maximises porosity(Ф)for the theoretical flow units'prediction during qualitative and quantitative estimation based on the adopted expressions.Therefore,the study reveals that water saturation(S_(w))and hydrocarbon/water ratios substantially control C_(w),and other contributing factors include thermal gradients and S_(wirr).The flow unit factors are also significant and will encourage fluid mobility.The evaluated reservoirs(R_(A) and R_(B))are below 10400 ft(3170 m)across wells R_(W1),R_(W2) and R_(W3) within the Agbada Formation of a geothermal gradient up to 2.7℃/100 m;therefore,they have good thermal conditions to enhance hydrocarbon mobility and increase S wirr.Hence,the reservoir should feature significant hydrocarbon extraction via primary recovery.The average water cut(C_(w-avg).)(12.3%)estimated for reservoir R_(A) is within the acceptable range;therefore,the associated water production from the three-phase reservoir will not be much of a concern.In addition,simple models are presented to aid an alternative approach for predicting reservoir quality and C_(w) within sandstone res-ervoirs,especially in the absence of core samples.

Fractal Characteristics and Main Controlling Factors of High-Quality Tight Sandstone Reservoirs in the Southeastern Ordos Basin

Due to the complex conditions and strong heterogeneity of tight sandstone reservoirs,the reservoirs should be classified and the controlling factors of physical properties should be studied.Cast thin section observations,cathodoluminescence,scanning electron microscopy(SEM),X-ray diffraction(XRD),and high-pressure mercury injection(HPMI)were used to classify and optimize the reservoir.The Brooks-Corey model and stepwise regression were used to study the fractal dimension and main controlling factors of the physical properties of the high-quality reservoir.The results show that the reservoirs in the study area can be divided into four types,and the high-quality reservoir has the best physical properties and pore-throat characteristics.In the high-quality reservoir,the homogeneity of transitional pores was the best,followed by that of micropores,and the worst was mesopores.The porosity was controlled by depth and kaolinite.The model with standardized coefficients is y=12.454−0.778×(Depth)+0.395×(Kaolinite).The permeability was controlled by depth,illite/montmorillonite,and siliceous cement,and the model with standardized coefficients is y=1.689−0.683×(Depth)−0.395×(Illite/Montmorillonite)−0.337×(Siliceous Cement).The pore-throat evolutionary model shows that the early-middle diagenetic period was when the reservoir physical properties were at their best,and the kaolinite intercrystalline pores and residual intergranular pores were the most important.

Genesis Types and Diagenesis Compaction Mechanisms of Sandstone Rreservoirs in Dynamic Environments in Oil/Gas Basins in China

The diversity of sandstone diagenesis mechanisms caused by the complex geological conditions of oil/gas basins in China could hardly be reasonably explained by the traditional concept of burial diagenesis. Three genesis types of thermal diagenesis, tectonic diagenesis and fluid diagenesis are presented on the basis of the dynamic environment of the oil/gas basins and.the controlling factors and mechanisms of sandstone diagenesis. Thermal diagenesis of sandstone reservoirs is related not only to the effect of formation temperature on diagenesis, but also to the significant changes in diagenesis caused by geothermal gradients. The concept of thermal compaction is presented. Thermal compaction becomes weaker with increasing depth and becomes stronger at a higher geothermal gradient. At the same formation temperature, the sandstone porosity in the region with a lower geothermal gradient is e^0.077＋0.0042T times higher than that in the region with a higher geothermal gradient. Both sudden and gradual changes are observed in diagenetic evolution caused by structural deformation. Average sandstone compaction increased by 0.1051% for every 1.0MPa increase of lateral tectonic compressional stress, while late tectonic napping helped to preserve a higher porosity of underlying sandstone reservoir. Fluid diagenesis is a general phenomenon. The compaction caused by fluid properties is significant. The coarser the grain size, the stronger the fluid effect on compaction. The greater the burial depth, the weaker the fluid effect on compaction for the specific reservoir lithology and the greater the difference in the fluid effects on compaction between different grain sizes.

A Comprehensive Porosity Prediction Model for the Upper Paleozoic Tight Sandstone Reservoir in the Daniudi Gas Field, Ordos Basin

This paper investigated the porosity controlling factors for tight sandstone reservoir in the Daniudi gas field, Ordos Basin based on an integrated petrographic, petrophysical and geostatistical analyses, and proposed a comprehensive prediction model for reservoir porosity. Compaction was found to be a key factor for causing reservoir densification. The degree of sandstone compaction appears to be affected by grain sizes and sorting. Under normal compaction conditions（e.g., cement content less than 6%, and with no dissolution）, the variation in reservoir porosity with burial depth can be well correlated with grain compositions, grain sizes, and sorting. Based on qualitative examination of the controlling factors for reservoir porosities, geostatistics were used to quantify the effects of various geological parameters on reservoir porosities. A statistical model for comprehensive prediction of porosity was then established, on the assumption that the present reservoir porosity directly relates to both normal compaction and diagenesis. This model is easy to use, and has been validated with measured porosity data. The porosity controlling factors and the comprehensive porosity prediction can be used to quantify effects of the main controlling factors and their interaction on reservoir property evolution, and may provide a reference model for log interpretation.

Authigenic clay minerals and calcite dissolution influence reservoir quality in tight sandstones:Insights from the central Junggar Basin,NW China

Authigenic clays and calcite cements are important in the development of reservoir tightness and the formation of hydrocarbon sweet spots.We investigated Jurassic low-permeability sandstone reservoirs in the central Junggar Basin,NW China,using petrography,mineralogy,porosity,and permeability assessment,and stable C and O isotope analysis to ascertain the influence of authigenic clays and calcites on reservoir quality.Here,we establish the properties and diagenetic processes of the reservoir sandstones,and construct a generalizable model of reservoir quality.The results show that the sandstones are mainly litharenite and feldspathic litharenite and can be classified into ductile-lithic-rich sandstones and ductile-lithic-poor sandstones according to rock composition.The ductile-lithic-rich sandstones are tight(mean porosity?7.31%;mean permeability?0.08 mD)as a result of intense compaction.In contrast,the ductile-lithic-poor sandstones can be classified into five types according to diagenetic process.The formation of favorable hydrocarbon reservoir properties is closely related to the presence of authigenic clays and dissolution of calcite.In particular,kaolinite fills intergranular pores,thereby blocking pore space and reducing reservoir quality.Chlorite coating resists compaction and limits the formation of quartz overgrowths,thereby preserving pore space and enhancing reservoir quality.Calcite controls reservoir quality through both precipitation and dissolution.Calcite precipitation results in reduced reservoir quality,whereby early calcites that were precipitated in formation water resist compaction and provide the basis for subsequent dissolution and late precipitation,whereas dissolution of calcite in mesodiagenesis improves reservoir quality.A generalized model is formulated by relating diagenetic facies types to depth and porosity,providing a reference for other similar reservoirs.Our data suggest that deeply buried tight sandstones can be exploration prospects under favorable conditions involving the presence of authigenic clays and dissolution of calcite,as in the central Junggar Basin of this study.

Siliceous Cementation of Chlorite-Coated Grains in the Permian Sandstone Gas Reservoirs,Ordos Basin

Objective It has long been controversial that whether authigenic chlorite coatings in sandstone reservoirs can prevent precipitation of siliceous cements. It is commonly believed that chlorite coatings （also called chlorite films, chlorite linings, or chlorite rims） may prevent quartz overgrowth, and thus help the preservation of original pores in sandstone reservoirs. Recently, however, this assumption has been challenged by reservoir geologists. This dispute cannot be solved by mere analysis of thin sections, nor by chemical equations and diagenesis analysis. The main objective of the present contribution is to shed light on this problem on the basis of sandstone samples from the Permian Shanxi and Shihezi Formations in the eastern part of the Sulige gas field, Ordos Basin in central China.

Types and genesis of sweet spots in the tight sandstone gas reservoirs:Insights from the Xujiahe Formation,northern Sichuan Basin,China

Through comprehensively applying geological and geophysical data,as well as core and thin section observation,the characteristics of reservoirs and fractures in the second member of the Xujiahe Formation(hereinafter referred to as Xu2 Member)in the Yuanba area,northern Sichuan Basin,were studied.Combined with the analysis of the main controlling factors of production capacity,the types and characteristics of the sweet spots in the tight sandstone gas reservoir were determined.The evaluation standards and geological models of the sweet spots were established.The results are as follows:(1)There are bedding-parallel fracture-,fault-induced fracture-,and pore-dominated sweet spots in the tight sandstone gas reservoirs of the Xu2 Member.(2)The bedding parallel fracture-dominated sweet spots have developed in quartz sandstones with well-developed horizontal fractures and micro-fractures.They are characterized by high permeability and high gas output during production tests.This kind of sweet spots is thin and shows a limited distribution.Their logging responses show extremely low gamma-ray(GR)values and medium-high AC values.Moreover,the bedding parallel fracture-dominated sweet spots can be mapped using seismic methods.(3)The fault-induced fracture-dominated sweet spots have welldeveloped medium-and high-angle shear fractures.Their logging responses show an increase in peaks of AC values and total hydrocarbon content and a decrease in resistivity.Seismically,the areas with welldeveloped fault-induced fracture-dominated sweet spots can be effectively mapped using the properties such as seismic entropy and maximum likelihood.(4)The pore-dominated sweet spots are developed in medium-grained feldspathic litharenites with good reservoir properties.They are thick and widely distributed.(5)These three types of sweet spots are mainly determined by sedimentation,diagenesis,and tectonism.The bedding parallel fracture-dominated sweet spots are distributed in beachbar quartz sandstones on the top of the 1st sand layer group in the Xu2 Member,which develops in a shore-shallow lake environment.The fault-induced fracture-dominated sweet spots mainly occur near faults.They are increasingly developed in areas closer to faults.The pore-dominated sweet spots are primarily distributed in the 2nd and 3rd sand layer groups,which lie in the development areas of distributary channels near provenances at western Yuanba area.Based on the geological and seismic data,a comprehensive evaluation standard for these three types of sweet spots of the tight sandstone reservoirs in the Xu2 Member has been established,which,on the one hand,lays the foundation for the development and evaluation of the gas reservoir,and on the other hand,deepens the understanding of sweet spot in the tight sandstone gas reservoirs.