Quantitative characterization of tight gas sandstone reservoirs using seismic data via an integrated rock-physics-based framework

Seismic characterizing of tight gas sandstone (TGS) reservoirs is essential for identifying promising gas-bearing regions. However, exploring the petrophysical significance of seismic-inverted elastic properties is challenging due to the complex microstructures in TGSs. Meanwhile, interbedded structures of sandstone and mudstone intensify the difficulty in accurately extracting the crucial tight sandstone properties. An integrated rock-physics-based framework is proposed to estimate the reservoir quality of TGSs from seismic data. TGSs with complex pore structures are modeled using the double-porosity model, providing a practical tool to compute rock physics templates for reservoir parameter estimation. The VP/VS ratio is utilized to predict the cumulative thickness of the TGS reservoirs within the target range via the threshold value evaluated from wireline logs for lithology discrimination. This approach also facilitates better capturing the elastic properties of the TGSs for quantitative seismic interpretation. Total porosity is estimated from P-wave impedance using the correlation obtained based on wireline log analysis. After that, the three-dimensional rock-physics templates integrated with the estimated total porosity are constructed to interpret microfracture porosity and gas saturation from velocity ratio and bulk modulus. The integrated framework can optimally estimate the parameters dominating the reservoir quality. The results of the indicator proposed based on the obtained parameters are in good agreement with the gas productions and can be utilized to predict promising TGS reservoirs. Moreover, the results suggest that considering microfracture porosity allows a more accurate prediction of high-quality reservoirs, further validating the applicability of the proposed method in the studied region.

Brittleness index and seismic rock physics model for anisotropic tight-oil sandstone reservoirs

Brittleness analysis becomes important when looking for sweet spots in tightoil sandstone reservoirs. Hence, appropriate indices are required as accurate brittleness evaluation criteria. We construct a seismic rock physics model for tight-oil sandstone reservoirs with vertical fractures. Because of the complexities in lithology and pore structure and the anisotropic characteristics of tight-oil sandstone reservoirs, the proposed model is based on the solid components, pore connectivity, pore type, and fractures to better describe the sandstone reservoir microstructure. Using the model, we analyze the brittleness sensitivity of the elastic parameters in an anisotropic medium and establish a new brittleness index. We show the applicability of the proposed brittleness index for tight-oil sandstone reservoirs by considering the brittleness sensitivity, the rock physics response characteristics, and cross-plots. Compared with conventional brittleness indexes, the new brittleness index has high brittleness sensitivity and it is the highest in oil-bearing brittle zones with relatively high porosity. The results also suggest that the new brittleness index is much more sensitive to elastic properties variations, and thus can presumably better predict the brittleness characteristics of sweet spots in tight-oil sandstone reservoirs.

K-Ar Dating of Authigenic Illites and Its Applications to the Study of Hydrocarbon Charging Histories of Typical Sandstone Reservoirs in Tarim Basin, China

The Tarim Basin in China comprises eight sets of sandstone reservoirs, five of which are investigated in detail in this study. The main purpose of this study is to investigate the hydrocarbon charging histories of reservoirs by applying K-Ar dating of authigenic illites. The ages of authigenic illites from the Lower Silurian bituminous sandstones in the Central Uplift area range from 383.5 to 235.2 Ma, suggesting that the Silurian oil accumulations were formed from the late Caledonian till the late Hercynian. The ages of authigenic illites from the Upper Devonian Donghe Sandstone reservoirs range from 263.8 to 231.3 Ma, indicating that hydrocarbon accumulations within the Donghe sandstone were formed mainly in the late Hercynian. The authigenic illites ages from the Lower Jurassic Yangxia Group sandstones in the Yinan-2 gas reservoir (Yinan-2, Kuqa Depression) range from 28.1 to 23.9 Ma, suggesting that the initial hydrocarbon charging occurred in the Miocene. The ages of the authigenic illites from the Lower Cretaceous sandstones in the Akemomu gas field (Ake-1, Kashi Sag, Southwest Depression) range from 22.6 to 18.8 Ma, indicating a probable early oil accumulation or early migration of hydrocarbon within this area. The illites from the Paleogene sandstones in the Dina-2 gas reservoir (Dina-201, Kuqa Depression) have a detrital origin; they cannot be used to study the hydrocarbon charging histories. The ages of authigenic illites in the underlying Cretaceous sandstones in the same well (Dina-201) range from 25.5 to 15.5 Ma, indicating that hydrocarbon charging in this reservoir probably occurred within the Miocene. This study highlights the potential of applying K-Ar dating of authigenic illites to investigate the timing of hydrocarbon charging histories of the Tarim Basin reservoir sandstones.

Numerical modelling of the dynamic process of oil displacement by water in sandstone reservoirs with random pore structures

The study aims to identify a suitable site for open and bore well in a farmhouseusing ground magnetic survey in south India.It also aims to define depth to granitoid and structural elements which traverse the selected area.Magnetic data(n=84)measured,processed and interpreted as qualitative and quantitatively.The results of total magnetic intensities indicate that the area is composed of linear magnetic lows trending NE-SW direction and circular to semi-circular causative bodies.The magnetic values ranged from-137 nT to 2345 nT with a mean of 465 nT.Reduction to equator shows significant shifting of causative bodies in the southern and northern directions.Analytical signal map shows exact boundary of granitic bodies.Cosine directional filter has brought out structural element trending NE-SW direction.Results of individual profile brought to light structurally weak zone between 90 m and 100 m in all the profile lines.Sudden decrease of magnetic values from 2042 nT to 126 nT noticed in profile line 6 between 20 m and 30 m indicates fault occurrence.Magnetic breaks obtained from these maps were visualized,interpreted and identified two suitable sites for open and bore well.Radially averaged power spectrum estimates depth of shallow and deep sources in 5 m and 50 m,respectively.Euler method has also been applied to estimate depth of granitoid and structural elements using structural indexes 0,1,2,and 3 and found depth ranges from<10 m to>90 m.Study indicates magnetic method is one of the geophysical methods suitable for groundwater exploration and site selection for open and borewells.

Mapping of thin sandstone reservoirs in bisol field, Niger delta, Nigeria using spectral decomposition technique

This study focuses on using spectral decomposition(SD)technique to characterize complicated reservoirs to understand the structural and stratigraphic variations in the interpreted horizons from Bisol field.The purpose of this study is to use geophysical and well logging data sets to map the thin-bedded sandstone reservoirs and prospect zones within the multiple reservoirs in Bisol field,Niger Delta.The interpretation of faults and horizons was carried out on the seismic section,which was further used to produce the structural maps.Seismic attributes such as trace and variance were used to enhance the truncated structures from the seismic section,while the produced spectra were used to delineate the stratigraphy and thickness of the thin-bedded reservoirs.Thin sandstone reservoirs were identified from well logs and consequently mapped on the seismic section.Fast Fourier Transform workflow was successfully used to image the stratigraphic features in the study area.Three horizons(S1T,S2T and S3T)were delineated from the seismic section,and four reservoirs were mapped and correlated across the wells.Frequency analyses from the seismic sectional view revealed some thin pay sandstone reservoirs,which were characterized by high amplitude.Three new probable zones(Prospect A,B and C)of hydrocarbon accumulation were identified using the SD technique.

Depositional and Diagenetic Controls on Sandstone Reservoirs with Low Porosity and Low Permeability in the Eastern Sulige Gas Field, China

In order to determine the genesis and the factors that control the low-porosity and low- permeability sandstone reservoirs in the eastern Sulige Gas Field in the Ordos Basin, systematic studies on the sedimentary facies and diagenesis were conducted by means of analysis of cores, thin sections, fluid inclusions, X-ray diffraction, cathode luminescence and scanning electron microscope. It was found that the sand bodies of the major gas reservoirs in the Shan1 section （P1S1） and the He8 section （P2H8） were formed during the Permian as sedimentary facies such as braided-channel bars, braided-river channels and point bars of a meandering river. Four types of diagenetic facies developed subsequently： in order from the best to the poorest properties these are type A （weak compaction, early calcite cement-chlorite film facies）, type B （moderate compaction, quartz overgrowth-feldspar corrosion-kaolinite filling facies）, type C （strong compaction, late calcite cement-quartz corrosion facies） and type D （matrix filling and strong compaction facies）. This diagenesis is undoubtedly the main reason for the poor reservoir properties of sandstone reservoirs, but the sedimentary facies are the underlying factors that greatly affect the diagenesis and thus the reservoir performance. Favorable diagenetic facies developed mainly in relatively small lithofacies such as braided-river channels, channel bars and point bars. The vertical distribution of the physical properties and the diagenetic facies of the reservoirs are related to the stratigraphic succession. Most of the sandstones between mudstones and thin beds of sandstone are unfavorable diagenetic facies. Analyses indicate that siliceous cementation can hardly be stopped by hydrocarbon filling. Authigenic chlorite could hardly protect the primary porosity. It not only occupies pore space, but also blocks pathways through sandstone reservoirs, so that it has significant influence on the permeability. Authigenic chlorite cannot be used as a marker for a specific sedimentary facies because it can be formed in different sedimentary facies, but it indicates high hydrodynamic conditions and presence of favorable reservoirs.

Evaluation and prevention of formation damage in offshore sandstone reservoirs in China

Reduction in water injectivity would be harmful to the waterflood development of offshore sandstone oil reservoirs. In this paper the magnitude of formation damage during water injection was evaluated by analyzing the performance of water injection in the Bohai offshore oilfield, China. Two parameters, permeability reduction and rate of wellhead pressure rise, were proposed to evaluate the formation damage around injection wells. The pressure performance curve could be divided into three stages with different characteristics. Analysis of field data shows that formation damage caused by water injection was severe in some wells in the Bohai offshore oilfield, China. In the laboratory, the content of clay minerals in reservoir rock was analyzed and sensitivity tests （including sensitivity to water, ftow rate, alkali, salt and acid） were also conducted. Experimental results show that the reservoir had a strong to medium sensitivity to water （i.e. clay swelling） and a strong to medium sensitivity to flow rate, which may cause formation damage. For formation damage prevention, three injection schemes of clay stabilizer （CS） were studied, i.e. continuous injection of low concentration CS （CI）, slug injection of high concentration CS （SI）, and slug injection of high concentration CS followed by continuous injection of low concentration CS （SI-CI）. Core flooding experiments show that SI-CI is an effective scheme to prevent formation damage and is recommended for the sandstone oil reservoirs in the Bohai offshore oilfield during water injection.

Physical properties of sandstone reservoirs: Implication for fluid mobility

Core samples representing depths of hydrocarbon-bearing zones are not readily accessible for reservoir evaluations.On the other hand,wireline logs with incorporated seismic data,which can be archived over a more extended period while retaining their original forms,are typically more available for research purposes.Therefore,the study relies on wireline logs with seismic data to predict the reservoirs'fluid mobility by evaluating the hydraulic(flow)units,reservoir depths,fluid saturations,and geothermal gradients.It also indicates the associated water cut(C_(w))within Ritchie oil and gas field,Niger Delta considering a three-phase(oil-gas-water-bearing)reservoir(R_(A))and an oil-saturated reservoir(R_(B))delineated across three wells(R_(W1),R_(W2) and R_(W3)).Research activities combining the presented factors to achieve the stated objectives are not quite common within the study location.It shows lower,average and upper limits of the flow unit factors and irreducible water saturation(S_(wirr))within the reservoirs.The study shows the relationship between hydraulic units/fluid saturations and fluid mobility/associated C_(w) within the sandstone reservoirs.It maximises porosity(Ф)for the theoretical flow units'prediction during qualitative and quantitative estimation based on the adopted expressions.Therefore,the study reveals that water saturation(S_(w))and hydrocarbon/water ratios substantially control C_(w),and other contributing factors include thermal gradients and S_(wirr).The flow unit factors are also significant and will encourage fluid mobility.The evaluated reservoirs(R_(A) and R_(B))are below 10400 ft(3170 m)across wells R_(W1),R_(W2) and R_(W3) within the Agbada Formation of a geothermal gradient up to 2.7℃/100 m;therefore,they have good thermal conditions to enhance hydrocarbon mobility and increase S wirr.Hence,the reservoir should feature significant hydrocarbon extraction via primary recovery.The average water cut(C_(w-avg).)(12.3%)estimated for reservoir R_(A) is within the acceptable range;therefore,the associated water production from the three-phase reservoir will not be much of a concern.In addition,simple models are presented to aid an alternative approach for predicting reservoir quality and C_(w) within sandstone res-ervoirs,especially in the absence of core samples.

Characterization of favorable lithofacies in tight sandstone reservoirs and its significance for gas exploration and exploitation: A case study of the 2nd Member of Triassic Xujiahe Formation in the Xinchang area, Sichuan Basin

By using core,logging curves,and experiment data,favorable lithofacies types in the 2 nd Member of Triassic Xujiahe Formation in the Xinchang area,Sichuan Basin were classified,standard of the favorable lithofacies was established,planar distribution regularities of the favorable lithofacies were identified,and forming mechanisms of the favorable lithofacies and their control effect on production were examined.(1)The 2 nd Member of Xujiahe Formation has twelve types of lithofacies,among which multiple layer medium-coarse grain sandstone lithofacies,parallel bedding medium-coarse grain sandstone lithofacies,massive bedding medium-coarse grain sandstone lithofacies,inclined bedding medium-coarse grain sandstone lithofacies,and charcoal-bearing medium-coarse grain sandstone lithofacies with better physical properties and higher gas content are favorable lithofacies;they feature low gamma,low neutron porosity,low resistivity,and high acoustic travel time on logging curves.(2)The sedimentary process controls spatial distribution of sand bodies which are the material basis of the favorable lithofacies;post diagenetic fluids would differentially reconstruct the favorable lithofacies;tectonic activities and abnormal formation pressure made strata slide along the weakness plane,giving rise to fractures in different types of rocks,which can enhance the reservoir permeability significantly.(3)The development degree of favorable lithofacies is a major factor affecting stable production of gas well.

Quantitative Characterization of Interlayer Interference in Multi-Layered Sandstone Reservoirs Offshore China

X oilfield is a typical multi-layer sandstone reservoir in offshore China. In the early stage, in order to obtain economic oil production, directional well was used to adopt a set of multi-layer combined production, which resulted in serious interlayer interference, water injection inrush and low reserve utilization. Based on the theory of single-phase unstable seepage flow and the theory of oil-water two-phase non-piston displacement, the author innovatively established a mathematical model of interlayer dynamic interference in multilayer sandstone reservoirs, revealed the influence law of main controlling factors such as permeability, viscosity, starting pressure gradient and reservoir type on interlayer interference, and innovatively formed a quantitative characterization theory of interlayer interference in multilayer combined oil production. The technical demarcation of offshore multi-zone combined oil production reservoir system is formulated and the recombination of oil field development system is guided.

Fractal Characteristics and Main Controlling Factors of High-Quality Tight Sandstone Reservoirs in the Southeastern Ordos Basin

Due to the complex conditions and strong heterogeneity of tight sandstone reservoirs,the reservoirs should be classified and the controlling factors of physical properties should be studied.Cast thin section observations,cathodoluminescence,scanning electron microscopy(SEM),X-ray diffraction(XRD),and high-pressure mercury injection(HPMI)were used to classify and optimize the reservoir.The Brooks-Corey model and stepwise regression were used to study the fractal dimension and main controlling factors of the physical properties of the high-quality reservoir.The results show that the reservoirs in the study area can be divided into four types,and the high-quality reservoir has the best physical properties and pore-throat characteristics.In the high-quality reservoir,the homogeneity of transitional pores was the best,followed by that of micropores,and the worst was mesopores.The porosity was controlled by depth and kaolinite.The model with standardized coefficients is y=12.454−0.778×(Depth)+0.395×(Kaolinite).The permeability was controlled by depth,illite/montmorillonite,and siliceous cement,and the model with standardized coefficients is y=1.689−0.683×(Depth)−0.395×(Illite/Montmorillonite)−0.337×(Siliceous Cement).The pore-throat evolutionary model shows that the early-middle diagenetic period was when the reservoir physical properties were at their best,and the kaolinite intercrystalline pores and residual intergranular pores were the most important.

Hydrocarbon indication in Rio Bonito Formation sandstone:Implication for CO_(2)storage in São Paulo,Brazil

São Paulo State has witnessed CO_(2)storage-based investigations considering the availability of suitable geologic structures and proximity to primary CO_(2)source sinks related to bioenergy and carbon capture and storage(BECCS)activities.The current study presents the hydrocarbon viability evaluations and CO_(2)storage prospects,focusing on the sandstone units of the Rio Bonito Formation.The objective is to apply petrophysical evaluations with geochemical inputs in predicting future hydrocarbon(gas)production to boost CO_(2)storage within the study location.The study used data from eleven wells with associated wireline logs(gamma ray,resistivity,density,neutron,and sonic)to predict potential hydrocarbon accumulation and fluid mobility in the investigated area.Rock samples(shale and carbonate)obtained from depths>200 m within the study location have shown bitumen presence.Organic geochemistry data of the Rio Bonito Formation shale beds suggest they are potential hydrocarbon source rocks and could have contributed to the gas accumulations within the sandstone units.Some drilled well data,e.g.,CB-1-SP and TI-1-SP,show hydrocarbon(gas)presence based on the typical resistivity and the combined neutron-density responses at depths up to 3400 m,indicating the possibility of other hydrocarbon members apart from the heavy oil(bitumen)observed from the near-surface rocks samples.From the three-dimensional(3-D)model,the free fluid indicator(FFI)is more significant towards the southwest and southeast of the area with deeper depths of occurrence,indicating portions with reasonable hydrocarbon recovery rates and good prospects for CO_(2)injection,circulation and permanent storage.However,future studies based on contemporary datasets are required to establish the hydrocarbon viability further,foster gas production events,and enhance CO_(2)storage possibilities within the region.

Gas-Water Production of a Continental Tight-Sandstone Gas Reservoir under Different Fracturing Conditions

A numerical model of hydraulic fracture propagation is introduced for a representative reservoir(Yuanba continental tight sandstone gas reservoir in Northeast Sichuan).Different parameters are considered,i.e.,the interlayer stress difference,the fracturing discharge rate and the fracturing fluid viscosity.The results show that these factors affect the gas and water production by influencing the fracture size.The interlayer stress difference can effectively control the fracture height.The greater the stress difference,the smaller the dimensionless reconstruction volume of the reservoir,while the flowback rate and gas production are lower.A large displacement fracturing construction increases the fracture-forming efficiency and expands the fracture size.The larger the displacement of fracturing construction,the larger the dimensionless reconstruction volume of the reservoir,and the higher the fracture-forming efficiency of fracturing fluid,the flowback rate,and the gas production.Low viscosity fracturing fluid is suitable for long fractures,while high viscosity fracturing fluid is suitable for wide fractures.With an increase in the fracturing fluid viscosity,the dimensionless reconstruction volume and flowback rate of the reservoir display a non-monotonic behavior,however,their changes are relatively small.

Production forecasting methods for different types of gas reservoirs

Hydrocarbon production in oil and gas fields generally progresses through stages of production ramp-up,plateau(peak),and decline during field development,with the whole process primarily modeled and forecasted using lifecycle models.SINOPEC's conventional gas reservoirs are dominated by carbonates,low-permeability tight sandstone,condensate,volcanic rocks,and medium-to-high-permeability sandstone.This study identifies the optimal production forecasting models by comparing the fitting coefficients of different models and calculating the relative errors in technically recoverable reserves.To improve forecast precision,it suggests substituting exponential smoothing method-derived predictions for anomalous data caused by subjective influences like market dynamics and maintenance activities.The preferred models for carbonate gas reservoir production forecasts are the generalized Weng's,Beta,Class-I generalized mathematical,and Hu-Chen models.The Vapor pressure and Beta models are optimal for forecasting the annual productivity of wells(APW)from gas-bearing low-permeability tight sandstone reservoirs.The Wang-Li,Beta,and Yu QT tb models are apt for moderate-to-small-reserves,single low-permeability tight sandstone gas reservoirs.The Rayleigh,Hu-Chen,and generalized Weng's models are suitable for condensate gas reservoirs.For medium-to-high-permeability sandstone gas reservoirs,the lognormal,generalized gamma,and Beta models are recommended.

Effect and quantitative evaluation of CO_2 derived from organic matter in coal on the formation of tight sandstone reservoirs

Tight reservoirs are widely distributed, especially in coal measure strata. Identification of the densification mechanism of the tight sandstone reservoirs is critical in effectively exploring and exploiting tight gasoil resources. In this study, the gas for mation from type III organic matter in coal was kinetically modeled for the whole diagenetic stage, from the shallow buried biogas generation stage to the deep buried thermal gas generation stage. The results demonstrated that during hydrocarbon formation, quantities of nonhydrocarbon gases, such as CO2, were generated. The proportion of CO2 is about 50%70% of that of the C15, which far exceeds the CO2 content （05%） in the natural gas in the sedimentary basins. Geological case study analysis showed that a considerable part of the ＂lost＂ gaseous CO2 was converted into carbonate cement under favorable envi ronments. Under the ideal conditions, the volume of the carbonate cement transformed from total CO2 generated by 1 m3 coal （Junggar Basin Jurassic, TOC 67%） can amount to 0.32 m3. Obviously, this process plays a very important role in the for mation of tight sandstone reservoirs in the coal measures. Our results also show that the kinetic generation processes of Ci5 and CO2 are asynchronous. There are two main stages of CO2 generation, one at the weak diagenetic stage and the other at the overmature stage, which are different from largescale multistage hydrocarbon gas generation. Therefore, we can understand the mechanism of tight gas charging by determining the filling time for a tight gas reservoir and the key period of CO2 genera tion. Further analysis and correlation studies of a specific region are of great significance for determining the mechanism and modeling gas charging in tight reservoirs. It should be noted that the formation of tight sandstone reservoirs is the combined result of complex organicinorganic and waterrockhydrocarbon interactions. The details of spatial and temporal distributions of the carbonate cement derived from the organic C02, which combines with metal ions （Ca/Mg/Fe） in the formation water, should be further investigated.

Siliceous Cementation of Chlorite-Coated Grains in the Permian Sandstone Gas Reservoirs,Ordos Basin

Objective It has long been controversial that whether authigenic chlorite coatings in sandstone reservoirs can prevent precipitation of siliceous cements. It is commonly believed that chlorite coatings （also called chlorite films, chlorite linings, or chlorite rims） may prevent quartz overgrowth, and thus help the preservation of original pores in sandstone reservoirs. Recently, however, this assumption has been challenged by reservoir geologists. This dispute cannot be solved by mere analysis of thin sections, nor by chemical equations and diagenesis analysis. The main objective of the present contribution is to shed light on this problem on the basis of sandstone samples from the Permian Shanxi and Shihezi Formations in the eastern part of the Sulige gas field, Ordos Basin in central China.

Genesis Types and Diagenesis Compaction Mechanisms of Sandstone Rreservoirs in Dynamic Environments in Oil/Gas Basins in China

The diversity of sandstone diagenesis mechanisms caused by the complex geological conditions of oil/gas basins in China could hardly be reasonably explained by the traditional concept of burial diagenesis. Three genesis types of thermal diagenesis, tectonic diagenesis and fluid diagenesis are presented on the basis of the dynamic environment of the oil/gas basins and.the controlling factors and mechanisms of sandstone diagenesis. Thermal diagenesis of sandstone reservoirs is related not only to the effect of formation temperature on diagenesis, but also to the significant changes in diagenesis caused by geothermal gradients. The concept of thermal compaction is presented. Thermal compaction becomes weaker with increasing depth and becomes stronger at a higher geothermal gradient. At the same formation temperature, the sandstone porosity in the region with a lower geothermal gradient is e^0.077＋0.0042T times higher than that in the region with a higher geothermal gradient. Both sudden and gradual changes are observed in diagenetic evolution caused by structural deformation. Average sandstone compaction increased by 0.1051% for every 1.0MPa increase of lateral tectonic compressional stress, while late tectonic napping helped to preserve a higher porosity of underlying sandstone reservoir. Fluid diagenesis is a general phenomenon. The compaction caused by fluid properties is significant. The coarser the grain size, the stronger the fluid effect on compaction. The greater the burial depth, the weaker the fluid effect on compaction for the specific reservoir lithology and the greater the difference in the fluid effects on compaction between different grain sizes.

Displacement behavior and mechanism of long-term water flooding in sandstone oil reservoirs

Sandstone oil reservoirs with huge bottom water and high permeability are generally developed with high flow rate.After long-term water flooding(LTWF),the water flooding characteristics are quite different from that of original reservoir.In this paper,the effects of the PV number,viscosity,and displacement rate during LTWF are studied through experiments.The mechanism is analyzed based on analysis of changes in oil composition,rock mineral composition and wettability.The oil-water relative permeability curves,oil recovery and wettability were obtained with new experiments methods,which avoids the oil metering error by measuring oil and water separately.The research indicates that when the viscosity increases,the water phase permeability decreases,the residual oil saturation increases,and the water content rate increases earlier.A higher water flooding rate results in a higher ultimate recovery.A higher asphaltene content results in a higher viscosity and more oil-wet reservoir conditions.After LTWF,the wettability tends to water-wet,which is more favorable for heavy oil recovery.Moreover,LTWF reduces the clay content,which creates a more water-wet surface and a larger reservoir pore throat environment.This research provides insightful characteristics of offshore sandstone oil reservoirs,which can be used to enhance oil recovery.

Types and genesis of sweet spots in the tight sandstone gas reservoirs:Insights from the Xujiahe Formation,northern Sichuan Basin,China

Through comprehensively applying geological and geophysical data,as well as core and thin section observation,the characteristics of reservoirs and fractures in the second member of the Xujiahe Formation(hereinafter referred to as Xu2 Member)in the Yuanba area,northern Sichuan Basin,were studied.Combined with the analysis of the main controlling factors of production capacity,the types and characteristics of the sweet spots in the tight sandstone gas reservoir were determined.The evaluation standards and geological models of the sweet spots were established.The results are as follows:(1)There are bedding-parallel fracture-,fault-induced fracture-,and pore-dominated sweet spots in the tight sandstone gas reservoirs of the Xu2 Member.(2)The bedding parallel fracture-dominated sweet spots have developed in quartz sandstones with well-developed horizontal fractures and micro-fractures.They are characterized by high permeability and high gas output during production tests.This kind of sweet spots is thin and shows a limited distribution.Their logging responses show extremely low gamma-ray(GR)values and medium-high AC values.Moreover,the bedding parallel fracture-dominated sweet spots can be mapped using seismic methods.(3)The fault-induced fracture-dominated sweet spots have welldeveloped medium-and high-angle shear fractures.Their logging responses show an increase in peaks of AC values and total hydrocarbon content and a decrease in resistivity.Seismically,the areas with welldeveloped fault-induced fracture-dominated sweet spots can be effectively mapped using the properties such as seismic entropy and maximum likelihood.(4)The pore-dominated sweet spots are developed in medium-grained feldspathic litharenites with good reservoir properties.They are thick and widely distributed.(5)These three types of sweet spots are mainly determined by sedimentation,diagenesis,and tectonism.The bedding parallel fracture-dominated sweet spots are distributed in beachbar quartz sandstones on the top of the 1st sand layer group in the Xu2 Member,which develops in a shore-shallow lake environment.The fault-induced fracture-dominated sweet spots mainly occur near faults.They are increasingly developed in areas closer to faults.The pore-dominated sweet spots are primarily distributed in the 2nd and 3rd sand layer groups,which lie in the development areas of distributary channels near provenances at western Yuanba area.Based on the geological and seismic data,a comprehensive evaluation standard for these three types of sweet spots of the tight sandstone reservoirs in the Xu2 Member has been established,which,on the one hand,lays the foundation for the development and evaluation of the gas reservoir,and on the other hand,deepens the understanding of sweet spot in the tight sandstone gas reservoirs.

Laboratory study of fluid viscosity induced ultrasonic velocity dispersion in reservoir sandstones

Ultrasonic velocities of a set of saturated sandstone samples were measured at simulated in-situ pressures in the laboratory.The samples were obtained from the W formation of the WXS Depression and covered low to nearly high porosity and permeability ranges.The brine and four different density oils were used as pore fluids,which provided a good chance to investigate fluid viscosity-induced velocity dispersion.The analysis of experimental observations of velocity dispersion indicates that（1）the Biot model can explain most of the small discrepancy（about 2–3%）between ultrasonic measurements and zero frequency Gassmann predictions for high porosity and permeability samples saturated by all the fluids used in this experiment and is also valid for medium porosity and permeability samples saturated with low viscosity fluids（less than approximately 3 mP·S）and（2）the squirt flow mechanism dominates the low to medium porosity and permeability samples when fluid viscosity increases and produces large velocity dispersions as high as about 8%. The microfracture aspect ratios were also estimated for the reservoir sandstones and applied to calculate the characteristic frequency of the squirt flow model,above which the Gassmann’ s assumptions are violated and the measured high frequency velocities cannot be directly used for Gassmann’s fluid replacement at the exploration seismic frequency band for W formation sandstones.