Non-Darcy flow seepage characteristics of saturated broken rocks under compression with lateral constraint

Using an MTS816.03 test system and self-designed seepage apparatus, seepage tests of saturated broken rocks were conducted, and the influence of lithology, axial stress, grain size distribution and loading rate on seepage characteristics was analyzed. The results show that： （1） Under the same axial stress （12 MPa）, the permeability of different lithologic samples increases in the order： gangue 〈 mudstone 〈 sandstone 〈 limestone. The permeability of gangue is 3 magnitudes lower than that of limestone. The absolute value of the non-Darcy coefficient β increases in the order： limestone 〈 sandstone 〈 mudstone 〈 gangue. The non-Darcy coefficient β of limestone, which is positive, is 5 magnitudes lower than that of gangue. （2） With increasing axial stress, the permeability of saturated broken sandstone decreases, and the absolute value of the non-Darcy coefficient β increases. After the axial stress exceeds 12 MPa, the curves of permeability and non-Darcy coefficient β all tend to be stable. （3） With increasing Talbol power exponent, the permeability increases, and the absolute value of the non-Darcy coefficient β decreases. （4） With increasing loading, the permeability increases, and the absolute value of the non-Darcy coefficient β decreases. When the loading rate is 0.5 kN/s, the non-Darcy coefficient β is positive.

Oxygen transfer characteristics of water and bubble mixture pipe flow through two sudden contractions and expansions

The dissolved oxygen （DO） concentration is an important index of water quality. This paper studies the dissolved oxygen recovery of the water and bubble mixture pipe flow through two sudden contractions and expansions. A 3-D computational fluid dy- namics model is established to simulate the water and bubble mixture flow with a DO transport model. An experiment is conducted to validate the mathematical model. The mathematical model is used to evaluate the effect of geometric parameters on the head loss coefficient, the relative saturation coefficient and the oxygen absorption efficiency. It is found that the contraction ratio is a signi- ficant influencing factor, other than the relative length and the relative distance. Given the same relative length and relative distance, the head loss coefficient, the relative saturation coefficient and the oxygen absorption efficiency increase with the decrease of the contraction ratio, respectively. Given the same relative length and contraction ratio, the head loss coefficient increases with the in- crease of the relative distance firstly, and then decreases gradually, in contrast, the relative saturation coefficient and the oxygen ab- sorption efficiency decrease with the increase of the relative distance firstly, and then increase gradually, the relative saturation coefficient and the oxygen absorption efficiency are inversely proportional to the head loss coefficient, respectively.

Effect of cerium on structure,magnetism and magnetostriction of Fe_(81)Ga_(19) alloy

FeGa alloy is a new kind of magnetostrictive material, and rare-earth cerium can improve its magnetostrictive property.（Fe（81）Ga（19））（100-x）Cex（x = 0, 0.3 at%, 0.7 at%, 1 at%） samples were prepared by doping cerium in Fe（81）Ga（19） alloy. Their microstructures and phases were studied, and valence electronic structures were investigated. Electromagnetic parameters, such as coercivity, saturation magnetization,remnant magnetization and saturation magnetostrictive coefficients（λs） of every sample were measured.Cerium atoms are distributed at grain boundaries, and the Ce-doped alloys remain the A2 structure of FeGa alloy. When x is 0.7, the value of saturation magnetism is 217.08 emu/g, which is the maximum in the Ce-doped samples. The equivalent half length of single bond is the maximum also, and reaches to0.11380 nm. At the same time, the number of covalent electrons is 3.5672, and is the minimum of the Cedoped samples. Its As is the largest in the four samples. The change of As results in the change of equivalent half length of single bond in Ce-doped alloy.