Optimal scale selection is the key step of the slope segmentation. Taking three geomorphological units in different parts of the loess as test areas and 5 m-resolution DEMs as original test date, this paper employed t...Optimal scale selection is the key step of the slope segmentation. Taking three geomorphological units in different parts of the loess as test areas and 5 m-resolution DEMs as original test date, this paper employed the changed ROC-LV (Lucian, 2010) in judging the optimal scales in the slope segmentation process. The experiment results showed that this method is effective in determining the optimal scale in the slope segmentation. The results also showed that the slope segmentation of the different geomorphological units require different optimal scales because the landform complexity is varied. The three test areas require the same scale which could distinguish the small gully because all the test areas have many gullies of the same size, however, when come to distinguish the basins, since the complexity of the three areas is different, the test areas require different scales.展开更多
A set of new parameterizations for the friction velocity and temperature scale over gently sloped terrain and in calm synoptic conditions are theoretically derived. The friction velocity is found to be proportional to...A set of new parameterizations for the friction velocity and temperature scale over gently sloped terrain and in calm synoptic conditions are theoretically derived. The friction velocity is found to be proportional to the product of the square root of the total accumulated heating in the boundary layer and the sinusoidal function of the slope angle, while the temperature scale is proportional to the product of the boundary layer depth, the sinusoidal function of the slope angle and the potential temperature gradient in the free atmosphere. Using the new friction velocity parameterization, together with a parameterization of eddy diffusivity and an initial potential temperature profile around sunrise, an improved parameterization for the thermally induced upslope flow profile is derived by solving the Prandtl equations. The upslope flow profile is found to be simply proportional to the friction velocity.展开更多
The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in m...The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in mountainous areas. In this study, an analytical approach based on the energy equilibrium principle is presented to solve the flexural buckling stability of stratified rock slopes within the framework of multilayer beam theory. The generalized HoekBrown failure criterion is introduced to reflect the influences of slope size(scale effects) on the buckling stability. Subsequently, numerical and physical modellings from previous literatures are employed to validate the proposed approach. Furthermore, a practical case of Bawang Mountain landslide is also used for the comparative analysis. The study shows that the present analytical approach is capable to provide a more reasonable assessment for the buckling failure of stratified rock slopes, compared with several existing analytical approaches. Finally, a detailed parametric study is implemented, and the results indicate that the effects of rock strength, rock deformation modulus, geological strength index, layer thickness and disturbance degree of rock mass on the buckling failure of stratified rock slopes are more significant than that of rock type and slope angle.展开更多
This paper discusses oasis stability at regional scale with a case study in the northern slope areas of the Tianshan Mountains (NSTM). The results showed certain significant aspects. (1) As long as water resources in ...This paper discusses oasis stability at regional scale with a case study in the northern slope areas of the Tianshan Mountains (NSTM). The results showed certain significant aspects. (1) As long as water resources in the oasis keep stable and their utilization efficiency can be maintained or gradually increased, the primary productivity could be continuously increased and the natural primary productivity keeped relatively stable. In this case, it is considered that the oasis is stable and its sustainable development can be achieved at regional scale. (2) Considering the availability of water resources in the oases, the oases on the alluvial-diluvial fans are highly stable. In the alluvial plain downstream of the groundwater overflowing zones the oases are moderately stable and in the lacustrine deltas or dry lacustrine deltas the oases are lowly stable. (3) Enlargement of oases and the increase of water resources and vegetation coverage in the oasis will certainly enhance the 'cold-island effect' of the oasis and increase the stability of oases.展开更多
During the construction of some large-scale rock engineering,high-steep slopes and insufficient slope stability induced by unloading fissures are often encountered.For the reinforcement of these slopes,some techniques...During the construction of some large-scale rock engineering,high-steep slopes and insufficient slope stability induced by unloading fissures are often encountered.For the reinforcement of these slopes,some techniques(including conventional pre-stressed anchoring cable and unconventional anchoring hole)are usually utilized,however,having several obvious defects.Thus,it is very difficult for a designer to design an efficient reinforcement scheme for the high-steep slopes.For this reason,the authors develop the pre-stressed anchoring beam technique,in which tensile capacity of pre-stressed structures are fully utilized.It is analyzed that the new technique is characterized by multi-functions,including engineering investigation,efficient reinforcement,drainage,monitoring and urgent strength supplement,and hoped to be extensively applicable in the reinforcement of high-steep slopes.展开更多
A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency wav...A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.展开更多
文摘Optimal scale selection is the key step of the slope segmentation. Taking three geomorphological units in different parts of the loess as test areas and 5 m-resolution DEMs as original test date, this paper employed the changed ROC-LV (Lucian, 2010) in judging the optimal scales in the slope segmentation process. The experiment results showed that this method is effective in determining the optimal scale in the slope segmentation. The results also showed that the slope segmentation of the different geomorphological units require different optimal scales because the landform complexity is varied. The three test areas require the same scale which could distinguish the small gully because all the test areas have many gullies of the same size, however, when come to distinguish the basins, since the complexity of the three areas is different, the test areas require different scales.
基金supported by the National Natural Science Foundation of China(Grant No. 40233032)Ministry of Science and Tech-nology (Grant No. 2006BAB18B03 and Grant No.2006BAB18B05)Office of Naval Research (Grant No.N0001409WR20177)
文摘A set of new parameterizations for the friction velocity and temperature scale over gently sloped terrain and in calm synoptic conditions are theoretically derived. The friction velocity is found to be proportional to the product of the square root of the total accumulated heating in the boundary layer and the sinusoidal function of the slope angle, while the temperature scale is proportional to the product of the boundary layer depth, the sinusoidal function of the slope angle and the potential temperature gradient in the free atmosphere. Using the new friction velocity parameterization, together with a parameterization of eddy diffusivity and an initial potential temperature profile around sunrise, an improved parameterization for the thermally induced upslope flow profile is derived by solving the Prandtl equations. The upslope flow profile is found to be simply proportional to the friction velocity.
基金the financial support of the National Natural Science Foundation of China (Grant No.51579032, 51509173, U1765107)Fundamental Research Funds for the Central Universities (Grant No.DUT16ZD211, DUT17ZD205)
文摘The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in mountainous areas. In this study, an analytical approach based on the energy equilibrium principle is presented to solve the flexural buckling stability of stratified rock slopes within the framework of multilayer beam theory. The generalized HoekBrown failure criterion is introduced to reflect the influences of slope size(scale effects) on the buckling stability. Subsequently, numerical and physical modellings from previous literatures are employed to validate the proposed approach. Furthermore, a practical case of Bawang Mountain landslide is also used for the comparative analysis. The study shows that the present analytical approach is capable to provide a more reasonable assessment for the buckling failure of stratified rock slopes, compared with several existing analytical approaches. Finally, a detailed parametric study is implemented, and the results indicate that the effects of rock strength, rock deformation modulus, geological strength index, layer thickness and disturbance degree of rock mass on the buckling failure of stratified rock slopes are more significant than that of rock type and slope angle.
基金funded by one of National Basic Research Program of China (Grant No.2009CB825105)the National Natural Science Foundation of China (Grant No.40671015)
文摘This paper discusses oasis stability at regional scale with a case study in the northern slope areas of the Tianshan Mountains (NSTM). The results showed certain significant aspects. (1) As long as water resources in the oasis keep stable and their utilization efficiency can be maintained or gradually increased, the primary productivity could be continuously increased and the natural primary productivity keeped relatively stable. In this case, it is considered that the oasis is stable and its sustainable development can be achieved at regional scale. (2) Considering the availability of water resources in the oases, the oases on the alluvial-diluvial fans are highly stable. In the alluvial plain downstream of the groundwater overflowing zones the oases are moderately stable and in the lacustrine deltas or dry lacustrine deltas the oases are lowly stable. (3) Enlargement of oases and the increase of water resources and vegetation coverage in the oasis will certainly enhance the 'cold-island effect' of the oasis and increase the stability of oases.
基金This paper was financially supported by the Project 973 of Chinese National Program of Basic Research (No. 2002CB412701) the National Natural Science Foundation (No. 40502027)the Project of Innovation Program of Chinese Academy of Sciences (No. KZCX2-306).
文摘During the construction of some large-scale rock engineering,high-steep slopes and insufficient slope stability induced by unloading fissures are often encountered.For the reinforcement of these slopes,some techniques(including conventional pre-stressed anchoring cable and unconventional anchoring hole)are usually utilized,however,having several obvious defects.Thus,it is very difficult for a designer to design an efficient reinforcement scheme for the high-steep slopes.For this reason,the authors develop the pre-stressed anchoring beam technique,in which tensile capacity of pre-stressed structures are fully utilized.It is analyzed that the new technique is characterized by multi-functions,including engineering investigation,efficient reinforcement,drainage,monitoring and urgent strength supplement,and hoped to be extensively applicable in the reinforcement of high-steep slopes.
文摘A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.