Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd：YAG Thomson scattering system is developed for the Heliotron J helical device. A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier （H-mode） or the internal transport barrier of the helical plasma. The system has 25 spatial points with -10 mm resolution. Two high repetition Nd：YAG lasers （〉 550 m J@ 50 Hz） realize the measurement of the time evolution of the plasma profile with ~10 ms time intervals. Scattered light is collected by a large concave mirror （D----800 mm, f/2.25） with a solid angle of -100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form. The signal is amplified by newly designed fast preamplifiers with DC and AC output, which reduces the low frequency background noise. The signals are digitized with a multi-event QDC, fast gated integrators. The data acquisition is performed by a VME-based system operated by the CINOS.

High sampling-rate measurement of turbulence velocity fluctuations in Mach 1.8 Laval jet using interferometric Rayleigh scattering

Interferometric Rayleigh scattering diagnostic technique for the time-resolved measurement of flow velocity is studied. Theoretically, this systematic velocity-measured accuracy can reach up to 1.23 m/s. Measurement accuracy is then evaluated by comparing with hot wire anemometry results. Moreover, the distributions of velocity and turbulence intensity in a supersonic free jet from a Laval nozzle with a Mach number of 1.8 are also obtained quantitatively. The sampling rate in this measurement is determined to be approximately 10 k Hz.

Scattering Centers Measurements by a Modified MEMP Method

A modified matrix enhancement and matrix pencil (MMEMP) method is presented for the scattering centers measurements in step-frequency radar. The method estimates the signal parameter pairs directly unlike the matrix enhancement and matrix pencil (MEMP) method which contains an additional step to pair the parameters related to each dimension. The downrange and crossrange expressions of the scattering centers are deduced, as well as the range ambiguities, from the point of view of MMEMP method. Compared with the Fourier transform method, the numerical simulation shows that both the resolution and precision of the MMEMP method are higher than those of the Fourier method. The processing results of the real measured data for three cylinders prove the above conclusions further.

Determination of bulk viscosity of liquid water via pulse duration measurements in stimulated Brillouin scattering

We present a method by which to determine the bulk viscosity of water from pulse duration measurements of stimulated Brillouin scattering （SBS）. Beginning from a common model of Brillouin scattering, the bulk viscosity is shown to play an important role in Brillouin linewidth determination. Pulse durations of SBS back-reflected optical pulses are measured over the temperature range of 5-40℃. SBS linewidths are de- termined via Fourier transformation of the time-domain results, and the bulk viscosity of water is measured and derived from the obtained values. Our results show that the proposed method for measurement of pulse durations is an effective approach for determining bulk viscosity. The method can be easily extended to determine bulk viscosities of other Newtonian liquids.

The signal selection and processing method for polarization measurement radar

Based on the ambiguity function, a novel signal processing method for the polarization measurement radar is developed. One advantage of this method is that the two orthogonal polarized signals do not have to be perpendicular to each other, which is required by traditional methods. The error due to the correlation of the two transmitting signals in the traditional method, can be reduced by this new approach. A concept called ambiguity function matrix （AFM） is introduced based on this method. AFM is a promising tool for the signal selection and design in the polarization scattering matrix measurement. The waveforms of the polarimetric radar are categorized and analyzed based on AFM in this paper. The signal processing flow of this method is explained. And the polarization scattering matrix measurement performance is testified by simulation. Furthermore, this signal processing method can be used in the inter-pulse interval measurement technique as well as in the instantaneous measurement technique.

Inversion of particle size distribution from light-scattering data using a modified regularization algorithm

A modified regularization algorithm with a more proper operator was proposed for the inversion of particle size distribution （PSD） from light-scattering data in a laser particle sizer based on the Mie scattering principle. The Generalized Cross-Validation （GCV） method and the L-curve method were used for deter- mining the regularization parameter. The Successive Over-Relaxation （SOR） iterative method was used to increase the exactness and stability of the converged result. The simulated results based on the modified algorithm are in a good agreement with the experimental data measured for nine standard particulate samples, their mixtures as well as three natural particulate materials with irregular shapes, indicating that this modified regularization method is not only feasible but also effective for the simulation of PSD from corresponding light-scattering data.