According to the characters of poly-ether-ether-ketone (PEEK) plastic, the spinnerets with three kinds of different structure were designed. The effects of spinneret structure on the melt spinning conditions, melt flo...According to the characters of poly-ether-ether-ketone (PEEK) plastic, the spinnerets with three kinds of different structure were designed. The effects of spinneret structure on the melt spinning conditions, melt flow instability of the screw extrusion, and the performance of PEEK fibers were studied. The results show that the appropriate screw extrusion temperature is 370 385℃. The PEEK fibers extruded using the spinnerets with L/D=6, 8holes and 0.5mm in diameter have better performances. The performances of PEEK fibers are related to the dia- meter of the spinneret hole. Increasing the L/D value of the spinnerets can not always improve the surface quality and the performances of PEEK fibers. The extrusion pressure is about 50% of that of the spinneret with 12holes and 0.3mm in diameter.展开更多
Inherent drawbacks associated with drug-eluting stents have prompted the development of bioresorbable cardiovascular stents.Additive manufacturing(3-dimentional(3D)printing)has been widely applied in medical devices.I...Inherent drawbacks associated with drug-eluting stents have prompted the development of bioresorbable cardiovascular stents.Additive manufacturing(3-dimentional(3D)printing)has been widely applied in medical devices.In this study,we develop a novel screw extrusion-based 3D printing system with a new designed mini-screw extruder to fabricate stents.A stent with a zero Poisson’s ratio(ZPR)structure is designed,and a preliminary monofilament test is conducted to investigate appropriate fabrication parameters.3D-printed stents with different geometric structures are fabricated and analyzed by observation of the surface morphology.An evaluation of the mechanical properties and a preliminary biological evaluation of 3D-printed stents with different parameters are carried out.In conclusion,the screw extrusion-based 3D printing system shows potential for customizable stent fabrication.展开更多
This research explored replacing acrylic core-shell impact modifier （AIM） by silica fume to toughen PVC. 100%, 75%, 50% and 25% of AIM （8 phr） were substituted by silica fume in PVC respectively, and then processe...This research explored replacing acrylic core-shell impact modifier （AIM） by silica fume to toughen PVC. 100%, 75%, 50% and 25% of AIM （8 phr） were substituted by silica fume in PVC respectively, and then processed by dry blending and twin-screw extrusion. Severe silica fume agglomeration was observed by scanning electron microscope （SEM） in the PVC matrix when 8 phr pure silica fume was used and processed by screw speed of 20 rpm. Its tensile strength was thereby reduced by 38% comparing to unmodified PVC. The silica fume was successfully dispersed while the screw speed was slowed down to 10 rpm to give a stronger screw torque and a longer melt residential time in the extruder. The tensile strength was ’recovered’ to a level comparable to unmodified PVC. Impact test were performed on all formulations extruded at 10 rpm screw speed and synergetic toughening effect was found with 50% substitution and it had the impact strength that was comparable to 8 phr pure AIM toughened PVC.展开更多
文摘According to the characters of poly-ether-ether-ketone (PEEK) plastic, the spinnerets with three kinds of different structure were designed. The effects of spinneret structure on the melt spinning conditions, melt flow instability of the screw extrusion, and the performance of PEEK fibers were studied. The results show that the appropriate screw extrusion temperature is 370 385℃. The PEEK fibers extruded using the spinnerets with L/D=6, 8holes and 0.5mm in diameter have better performances. The performances of PEEK fibers are related to the dia- meter of the spinneret hole. Increasing the L/D value of the spinnerets can not always improve the surface quality and the performances of PEEK fibers. The extrusion pressure is about 50% of that of the spinneret with 12holes and 0.3mm in diameter.
基金funding support from the Beijing Municipal Natural Science Foundation,China(Z150001)supported by Beijing Anzhen Hospital.
文摘Inherent drawbacks associated with drug-eluting stents have prompted the development of bioresorbable cardiovascular stents.Additive manufacturing(3-dimentional(3D)printing)has been widely applied in medical devices.In this study,we develop a novel screw extrusion-based 3D printing system with a new designed mini-screw extruder to fabricate stents.A stent with a zero Poisson’s ratio(ZPR)structure is designed,and a preliminary monofilament test is conducted to investigate appropriate fabrication parameters.3D-printed stents with different geometric structures are fabricated and analyzed by observation of the surface morphology.An evaluation of the mechanical properties and a preliminary biological evaluation of 3D-printed stents with different parameters are carried out.In conclusion,the screw extrusion-based 3D printing system shows potential for customizable stent fabrication.
文摘This research explored replacing acrylic core-shell impact modifier （AIM） by silica fume to toughen PVC. 100%, 75%, 50% and 25% of AIM （8 phr） were substituted by silica fume in PVC respectively, and then processed by dry blending and twin-screw extrusion. Severe silica fume agglomeration was observed by scanning electron microscope （SEM） in the PVC matrix when 8 phr pure silica fume was used and processed by screw speed of 20 rpm. Its tensile strength was thereby reduced by 38% comparing to unmodified PVC. The silica fume was successfully dispersed while the screw speed was slowed down to 10 rpm to give a stronger screw torque and a longer melt residential time in the extruder. The tensile strength was ’recovered’ to a level comparable to unmodified PVC. Impact test were performed on all formulations extruded at 10 rpm screw speed and synergetic toughening effect was found with 50% substitution and it had the impact strength that was comparable to 8 phr pure AIM toughened PVC.
