A new algorithm of retrieving a petroleum substances absorption coefficient in sea water based on a remote sensing image

Establishing the remote sensing algorithm of retrieving the absorption coefficient of seawater petroleum substances is an efficient way to improve the accuracy of retrieving a seawater petroleum concentration using a remote sensing technology. A remote sensing reflectance is a basic physical parameter in water color remote sensing. Apply it to directly retrieve the absorption coefficient of seawater petroleum substances is of potential advantage. The absorption coefficient of waters containing petroleum [ACWCP, a_o（λ）], consists of the absorption coefficient of pure water [ACPW, a_w（λ）], plankton [ACP, a_（ph）（λ）], colored scraps [ACCS, a_（d,g）（λ）], and petroleum substance [ACPS, a_（oil）（λ）]. Among those, ACCS consists of the absorption coefficient of nonalgal particle [ACNP, a_d（λ）] and colored dissolved organic matter [ACCDOM, a_g（λ）]. For waters containing petroleum, the retrieved ACCS using the existing method is a combination absorption coefficient of ACNP,ACCDOM and ACPA [CAC, a_（d,g,oil）（λ）]. Therefore, the principle question is how to extract ACPS from CAC.Through the analysis of the three proportion tests conducted between the year of 2013 and 2015 and the corresponding remote sensing data, an algorithm of retrieving the absorption coefficient of petroleum substances is proposed based on remote sensing reflectance. First of all, ACPS and CAC are retrieved from the reflectance using the quasi-analytical algorithm（QAA）, with some parameter modified. Secondly, given the fact that the backscatter coefficient [BC, b_（bp）（555）] of total particles at 555 nm can be obtained completely from the reflectance, the relation between BC and ACNP in petroleum contaminated water can be established. As a result, ACNP can be calculated. Then, combining the remote sensing retrieving algorithm of a_g（440）, the method of achieving the spectral slope of the absorption coefficient can be established, from which ACCDOM,can be calculated. Finally, ACPS can be computed as the residual. The accuracy of ACPS based on this algorithm is 86% compared with the in situ measurements.

Mechanical Properties of Sea Water Sea Sand Coral Concrete Modified with Different Cement and Fiber Types

The mechanical properties of modified sea water sea sand coral concrete(SWSSCC)under axial compression were experimentally studied.Two different parameters were considered in this test:types of cement and fiber.An experimental campaign was developed involving uniaxial compression tests and the use of digital image correlation(DIC)method to analyze the strain distribution and crack propagation of specimen.Test results indicated that the compressive strength and elastic modulus of SWSSCC were improved by adding stainless steel fibers(SSF),while polypropylene fibers(PF)enhanced the SWSSCC peak deformation.It was found that the elastic modulus and strength of SWSSCC using ordinary Portland cement(OPC)were higher compared to specimen with low alkalinity sulphoaluminate cement(LAS).Typical strain distribution changed with the variation of fiber types.The propagation and characteristics of cracks in SWSSCC containing PF were similar to those of cracks in SWSSCC.However,the propagation of cracks and the development of plastic deformation in SWSSCC were effectively hindered by adopting SSF.Finally,an analytical stress-strain expression of specimen considering the influences of fibers was established.The obtained results would provide a basis for the application of SWSSCC.

Bacterial and archaeal communities in deep sea waters near the Ninetyeast Ridge in Indian Ocean

Depth-dependent distribution patterns of bacterial and archaeal communities in deep sea water column around the Ninetyeast Ridge in the Indian Ocean were investigated using 16S rRNA gene profiling.Sampling was conducted at the northern Ninetyeast Ridge(1°59.89′N–9°59.70′S,87°58.90′E–88°00.03′E)from September to November 2016 where samples were collected from the bathyal(1000 m)to bathypelagic depths(>4000 m)in four different stations.A total of 1565405 clean data falling into 6712 bacterial OTUs and 1452727 clean data falling into 806 archaeal OTUs based on 97%similarity level were analyzed.Most of the bacterial 16S rRNA gene sequences were affiliated with Gammaproteobacteria,followed by Alphaproteobacteria and Bacteroidia.The archaeal 16S rRNA gene sequences mostly affiliated to Nitrososphaeria(Thaumarchaeota)dominated with relative abundances ranging from 52.68%to 97.2%,followed by Thermoplasmata(Euryarchaeota).Vertical partitioning of bacterial and archaeal communities among different water layers was observed.Canonical correspondence analysis(CCA)and Spearman’s correlations revealed that depth(P=0.003),dissolved oxygen(P=0.019),and nitrite(P=0.033)were the main environmental factors affecting bacterial community structure at genus level in the Ninetyeast Ridge.On the other hand,the first two CCA axes accounted for 74.4%of the explained total variance,it seems that the archaeal communities at genus level were heavily influenced by the environmental variables including depth,dissolved oxygen(DO),nitrite,salinity,phosphate,ammonia,nitrate,and silicate,but none of them exhibited any significant correlation on the structuring(P>0.1).

Numerical Study of Oil Pollution on Sea Waters

This paper adopted an upstream FEM of 2-D unsteady flow to calculate the tidal flow in Zhoushan sea area. Based on the verification of the tidal current and environmental situation, the effects of the oily waste discharged from the oil berths on water quality have been calculated with a similar method. The isodilutions of oil pollutant are drawn from different sewage discharges. The moving loci of the slick centrepoint of oil spill have been calculated. The spreading area of the oil spill has also been forecasted. The results indicate that the set of models can predict the transport of oil spill in the sea area with reasonable accuracy.

Magnetic susceptibility measurements on metakaolin admixtured cement hydrated with ground water and sea water

The role of metakaolin in the properties of Portland cement hydrated with ground water and sea water was described by magnetic susceptibility study. Cement pastes containing 0wt%, 10wt%, 20wt% and 30wt% replacement of metakaolin and in a water/cement （W/C） ratio of 0.4 were prepared. The susceptibility at different hydration periods was determined by Faraday Curie balance and it was related to the changes in setting time and compressive strength of admixtured cement. Compared with sea water-treated cement paste, the magnetic susceptibility of ground water-treated cement paste is higher in value. The observed result shows that, irrespective of water, the magnetic susceptibility increases with increasing metakaolin percentage replacement level in cement.

Degradation of Pore Structure and Microstructures in Hardened Cement Paste Subjected to Flexural Loading and Wet-dry Cycles in Sea Water

Hardened cement paste was subjected to the flexural loading and wet-dry cycles in sea water. The degradation of microstructures was obtained using scanning electron microscope （SEM）, and the energy dispersive spectrum （EDS） analysis was carried to analyze the local composition. Mercury intrusion porosimetry （Poremaster GT-60） was used to analyze the degradation of pore structures. The experimental results show that the synergistic action of the flexural loading, wet-dry cycles and sea water leads to significant deterioration of hardened cement paste. The degradation of microstructures in the tensile region is more serious than that in the compressive region. The flexural loading and wet-dry cycles accelerate the chemical attack of sea water.

Sea water intrusion in coastal areas of Yellow Seaand Bohai Sea

ＳｅａｗａｔｅｒｉｎｔｒｕｓｉｏｎｉｎｃｏａｓｔａｌａｒｅａｓｏｆＹｅｌｌｏｗＳｅａａｎｄＢｏｈａｉＳｅａＳｈｅｎｇＸｕｅｂｉｎ；ＳｕｎＪｉａｎｚｈｏｎｇ；ＤａｉＺｈａｏｈｕａ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｅ...

Study on sea water intrusion into palaeochannels on south coastal plain of the Laizhou Bay by the Bohai Sea

The palaeochannel evolution in the study region is divided into four stages by such methods as 14C dating. Sea water intrusion through palaeochannels has been studied as a focal point. Palaeochannels are the main passageways through which the sea water intrudes at a higher speed, through many means and in a changeable dynamic state.

Test of numerical prediction of sea water temperature in the Taiwan Strait

A dynamic numerical prediction model of sea water temperature for limited sea area is used to predict the sea water temperature at the sea area near Fujian. Essential adjustments have been made in accordance with the characteristics of this region. Two Tests have been made. One is in summer (3 d) and the other is in winter (10 d). In the summer test, a typhoon is just passing by and the calculated current field well responds to typhoon. In the winter test, variation tendency of the predicted sea water temperature field agrees with that of the observation basically, the absolute mean error in the whole sea area is 0 .6 ℃. The variation of the sea water temperature is mostly af- fected by entrainment and pumping, which is related to the topography of the strait.

Effect of ocean environmental factors on sound absorption by boric acid relaxation in sea water

By using the expressions for the maximum absorption per wavelength (αλ),and the relaxation frequency fr of the boric acid relaxation derived previously by the author and employing the related oceanographic literatures, the effects of pressure, temperature, pH and salinity on (αλ)r and ∫r of the boric acid relaxation in sea water have been estimated. Results show that ( αλ), not only increases with pH but also increases approximately linearly with pressure and temperature, and is nearly proportional to the 1. 35 power of salinity. However, pressure, pH and salinity have negligible effect on ∫r; therefore, ∫r, can be approximately expressed as a function of temperature only. Comparisons of the predicted with the measured ( αλ)r and ∫r in different ocean areas are given.

Sea Water Intrusion Modeling in Rashid Area of Nile Delta (Egypt) via the Inversion of DC Resistivity Data

The current research focuses on the detection of sea water intrusion in Rashid area which is located about 75 km east to Alexandria, Egypt. For this purpose, geoelectrical survey was carried out using the Schlumberger Vertical Electric Sounding (VES) to identify freshwater thickness, sea water intrusion and estimate subsurface lithology. Seventeen VES stations were measured with current electrode separation (AB/2) ranging from 1.5 m to 100 m. Then, the VES data was interpreted using 1-D and 2-D inversion schemes of DC resistivity data based on least squares method with smoothness constrains. The inverted resistivity distribution at relatively shallow depth shows an important low resistivity zone that probably reflects salt water alteration zone (northern parts). Depth to the freshwater bearing layer reaches its maximum at the south and decreases towards the north. From quantitative interpretation, invasion of salt water started at depth about 10 m at north in the thickness of freshwater bearing layer ranging from 15 to 25 m, while at depth of about 120 m all the layers were saturated with salt water.

Nrf2 Pathway Involvement in the Beneficial Skin Effects of Moderate Ionic Osmotic Stress—The Case of The Dead Sea Water

Objectives: Exposing skin to moderate ionic osmotic stress (MIOS) triggers several biochemical responses. The objective of this work is to reveal the mechanism triggered by MIOS on the skin surface. Furthermore, this work aims to study the involvement of the Nrf2 (nuclear factor erythroid-2-related factor 2) pathway, activated by MIOS, and its beneficial effect in protecting skin against stress via the stimulation of phase II enzymes. Methods: HaCaT cells and human skin organ culture were exposed to Dead Sea Water (DSW) as MIOS inducers and the induction of internal ROS elevation, Nrf2 translocation, mRNA gene expressions of the phase II enzymes, heme-oxygenase 1 (HO1), and Catalase (CAT) were determined. Results: Skin exposure to MIOS increases Nrf2 translocation to the nucleus, leading to increased levels of ROS, HO1, and CAT. Furthermore, exposing skin to MIOS promotes protection against UVB-related risks. This is demonstrated by attenuation of the expression of biomarkers, related to UVB-induced damage, Caspase-3, IL-8, and IL-1β. Conclusions: Skin exposure to MIOS leads to the activation of Nrf2 skin defense pathway and, therefore, could present beneficial advantages to human skin health, as demonstrated on human skin models. The beneficial effects of MIOS, induced by DSW are significantly superior to eq. NaCl brine, suggests that MIOS protection of skin against stress is partially related to specific mineral combinations.

THE CHARACTERISTIC AND CAUSE OF SEA WATER INTRUSION AND POLLUTION IN SOUTH LIAODONG PENINSULA

Based on various patterns of groundwater and their abundance characters in south Liaodong Peninsula, the distribution, stage, pattern and characters of sea water intrusion in the serious sea water intrusion areas are analysed. The reasons to cause sea water intrusion are uneven precipitation, limited recharge of surface water, artificial overpumping, lithology and geological structure. It can provide scientific basis for reasonable utilization of limited water resource in line with the local conditions.

Corrosion characteristics of copper in magnetized sea water

The corrosion characteristics of copper in magnetic action system were investigated by mass loss method,electrochemical test,scanning electron microscopy(SEM) and energy analysis. It is found that the corrosion process of copper is influenced by magnetic field. The flow corrosion rate of copper decreases at the initial segment,then drives to gentle stage at the final segment. From electrochemical test,the corrosion rate of copper in the magnetized sea water is minimal compared with that in 3.5% NaCl solution and sea water. Electrochemical impedance spectroscopy(EIS) plots of copper in 3.5% NaCl,sea water and magnetized sea water are similar. However,EIS plot of copper in magnetized sea water shifts rightwards due to the effect of magnetic field on sea water. The corrosion process of copper in magnetized sea water is pitting corrosion. The surfaces of samples are finer in magnetized sea water relative to those in 3.5% NaCl solution and sea water. The corrosion products of copper include large amount of Cu element,O element and Cl element. Cu2O and CuCl2 are the primary products. This suggests that electromagnetic treatment has remarkable effect on the corrosion of copper.

What Depth Should Deep-Sea Water be Pumped up from in the South China Sea for Medicinal Research?

In this study, seawater was pumped up from 150, 200, 300, 500 and 1000 m in the South China Sea and analyzed to make certain what depth should deep-sea water (DSW) be pumped up for medicinal usage. The pumping depth of DSW was determined on the basis of chemical ingredients. The analyses of inorganic elements and dissolved organic matter (DOM) were performed by inductively coupled plasma mass spectrometry (ICP-MS) and ultra performance liquid chromatography-mass spectrometry (UPLC-MS) respectively. The raw data were used for hierarchical cluster analysis (HCA) and principal component analysis (PCA). The results showed that seawater pumped up from 500 m and 1000 m was similar in their chemical ingredients, and was different from the seawater pumped up from other depths. These results indicated that seawater from more than 500 m depth had relatively stable chemical ingredients and could be used as DSW in the South China Sea.