Growth performance and physiological parameters of the second generation selected and control groups of Pinctada martensii

In May of 2007,the second generation selected （SS） and control （SC） groups of pearl oyster Pinctada martensii were established by selecting 10% breeders with the largest and mean shell length,respectively,from the first generation selected group.Growth performance of the SS and SC groups were compared on the basis of measurement data at Days 8,18,60,95,195 and 365.On Day 365,100 individuals （60.0–75.0 mm at shell length） were sampled from each group and then subjected to the experiment where physiological parameters such as filtrate rate,oxygen consumption and ammonia excretion were measured at 15,20,25 and 30°C.The results show that the SS group had significantly larger mean shell length and shell height than the SC group at Days 8,18,60,95,195 and 365 （P 0.05）.The genetic gains at different ages varied from 6.0% to 17.0% for shell length and 5.7% to 14.6% for shell height,respectively.At 15,20,25 and 30 ° C,the SS groups had significantly larger filtrate rate than the SC group （P 0.05）.At 15 and 25 °C,the differences in oxygen consumption rate between the SS and SC groups were not significant （P 0.05）.At 20 and 30 °C,however,the oxygen consumption rate of the SS group was significantly larger than the SC group （P 0.05）.At 15,20,25 and 30 °C,there were no significant differences in ammonia excretion rate between the SS and SC groups （P 0.05）.The present results indicate that there existed considerable genetic variability in the base population and a further selection could be likely fruitful.Mass selection for faster growth might produce animals that had higher intake of metabolizable energy by virtue of faster filtrating behavior.

NEW METHOD FOR WEAK FAULT FEATURE EXTRACTION BASED ON SECOND GENERATION WAVELET TRANSFORM AND ITS APPLICATION

A new time-domain analysis method that uses second generation wavelettransform (SGWT) for weak fault feature extraction is proposed. To extract incipient fault feature,a biorthogonal wavelet with the characteristics of impact is constructed by using SGWT. Processingdetail signal of SGWT with a sliding window devised on the basis of rotating operation cycle, andextracting modulus maximum from each window, fault features in time-domain are highlighted. To makefurther analysis on the reason of the fault, wavelet package transform based on SGWT is used toprocess vibration data again. Calculating the energy of each frequency-band, the energy distributionfeatures of the signal are attained. Then taking account of the fault features and the energydistribution, the reason of the fault is worked out. An early impact-rub fault caused by axismisalignment and rotor imbalance is successfully detected by using this method in an oil refinery.

Second Generation Wavelet Finite Element and Rotor Cracks Quantitative Identification Method

The presence of cracks in the rotor is one of the most dangerous and critical defects for rotating machinery. Defect of fatigue cracks may lead to long out-of-service periods, heavy damages of machines and severe economic consequences. With the method of finite element, vibration behavior of cracked rotors and crack detection was received considerable attention in the academic and engineering field. Various researchers studied the response of a cracked rotor and most of them are focused on the crack detection based on vibration behavior of cracked rotors. But it is often difficult to identify the crack parameters quantitatively. Second generation wavelets （SGW） finite element has good ability in modal analysis for singularity problems like a cracked rotor. Based on the fact that the feature of SGW could be designed depending on applications, a multiresolution finite element method is presented. The new model of SGW beam element is constructed. The first three natural frequencies of the rotor with different crack location and size were solved with SGW beam elements, and the database for crack diagnosis is obtained. The first three metrical natural frequencies are employed as inputs of the database and the intersection of the three frequencies contour lines predicted the normalized crack location and size. With the Bently RK4 rotor test rig, rotors with different crack location and size are tested and diagnosed. The experimental results denote the cracks quantitative identification method has higher identification precision. With SGW finite element method, a novel method is presented that has higher precision and faster computing speed to identify the crack location and size.

“Second-generation” stem cells for cardiac repair

Over the last years, stem cell therapy has emerged asan inspiring alternative to restore cardiac function after myocardial infarction. A large body of evidence has been obtained in this field but there is no conclusive data on the efficacy of these treatments. Preclinical studies and early reports in humans have been encouraging and have fostered a rapid clinical translation, but positive results have not been uniformly observed and when present, they have been modest. Several types of stem cells, manufacturing methods and delivery routes have been tested in different clinical settings but direct comparison between them is challenging and hinders further research. Despite enormous achievements, major barriers have been found and many fundamental issues remain to be resolved. A better knowledge of the molecular mechanisms implicated in cardiac development and myocardial regeneration is critically needed to overcome some of these hurdles. Genetic and pharmacological priming together with the discovery of new sources of cells have led to a "second generation" of cell products that holds an encouraging promise in cardiovascular regenerative medicine. In this report, we review recent advances in this field focusing on the new types of stem cells that are currently being tested in human beings and on the novel strategies employed to boost cell performance in order to improve cardiac function and outcomes after myocardial infarction.

SAR image despeckling based on edge detection and nonsubsampled second generation bandelets

To preserve the sharp features and details of the synthetic aperture radar （SAR） image effectively when despeckling, a despeckling algorithm with edge detection in nonsubsampled second generation bandelet transform （NSBT） domain is proposed. First, the Canny operator is utilized to detect and remove edges from the SAR image. Then the NSBT which has an optimal approximation to the edges of images and a hard thresholding rule are used to approximate the details while despeckling the edge-removed image. Finally, the removed edges are added to the reconstructed image. As the edges axe detected and protected, and the NSBT is used, the proposed algorithm reaches the state-of-the-art effect which realizes both despeckling and preserving edges and details simultaneously. Experimental results show that both the subjective visual effect and the mainly objective performance indexes of the proposed algorithm outperform that of both Bayesian wavelet shrinkage with edge detection and Bayesian least square-Gaussian scale mixture （BLS-GSM）.

Second Harmonic Generation of Lamb Wave in Numerical Perspective

The influences of phase and group velocity matching on cumulative second harmonic generation of Lamb waves are investigated in numerical perspective. Finite element simulations of nonlinear Lamb wave propagation are performed for Lamb wave mode pairs with exact and approximate phase velocity matching, with and without group velocity matching, respectively. The evolution of time-domain second harmonic Lamb waves is analyzed with the propagation distance. The amplitudes of primary and second harmonic waves are calculated to characterize the acoustic nonlinearity. The results verify that phase velocity matching is necessary for generation of the cumulative second harmonic Lamb wave in numerical perspective, while group velocity matching is demonstrated to not be a necessary condition.

Dual bound states in the continuum enhanced second harmonic generation with transition metal dichalcogenides monolayer

The emergence of two dimensional(2D)materials has opened new possibilities for exhibiting second harmonic genera-tion(SHG)at the nanoscale,due to their remarkable optical response related to stable excitons at room temperature.However,the ultimate atomic-scale interaction length with light makes the SHG of Transition Metal Dichalcogenides(TM-Ds)monolayers naturally weak.Here,we propose coupling a monolayer of TMDs with a photonic grating slab that works with doubly resonant bound states in the continuum(BIC).The BIC slabs are designed to exhibit a pair of BICs,reson-ant with both the fundamental wave(FW)and the second harmonic wave(SHW).Firstly,the spatial mode matching can be fulfilled by tilting FW's incident angle.We theoretically demonstrate that this strategy leads to more than four orders of magnitude enhancement of SHG efficiency than a sole monolayer of TMDs,under a pump light intensity of 0.1 GW/cm^(2).Moreover,we demonstrate that patterning the TMDs monolayer can further enhance the spatial overlap coefficient,which leads to an extra three orders of magnitude enhancement of SHG efficiency.These results demonstrate remarkable pos-sibilities for enhancing SHG with nonlinear 2D materials,opening many opportunities for chip-based light sources,nano-lasers,imaging,and biochemical sensing.

Photoinduced Second Harmonic Generation of Bi_2S_3 Microcrystallite Doped Silica Glass

Silica glasses doped with Bi2S3 microcystallite was prepared by the sol-gel process. Photoinduced second harmonic generation (SHG) was observed in the glass when it was irradiated with intense 1.06 μm and frequency doubled laser beams from a mode-locked Nd: YAG laser. It was found that the signal intensity increased with the irradiating time and approached a saturation gradually. The effect may be explained reasonably by the DC field model.

Generation of femtosecond laser pulses at 396 nm in K_3B_6O_(10)Cl crystal

K3B6O10Cl （KBOC）, a new nonlinear optical crystal, shows potential advantages for the generation of deep ultraviolet （UV） light compared with other borate crystals. In this paper we study for the first time the second harmonic generation （SHG） of a femtosecond Ti：sapphire amplifier with this crystal. Laser power is obtained to be as high as 220 mW at the central wavelength of 396 nm with a 1-mm-long crystal, and the maximum SHG conversion efficiency reaches 39.3%. The typical pulse duration is 83 fs, The results show that second harmonic （SH） conversion efficiency has the room to be further improved and that the new nonlinear crystal is very suited to generate the high efficiency deep ultraviolet laser radiation below 266 nm.

The Lifting Scheme Based on the Second Generation Wavelets

The lifting scheme is a custom design construclion of Biorthogonal wavelets, a fast and efficient method to realize wavelet transform,which provides a wider range of application and efficiently reduces the computing time with its particular frame. This paper aims at introducing the second generation wavelets, begins with traditional Mallat algorithms, illustrates the lifting scheme and brings out the detail steps in the construction of Biorthogonal wavelets. Because of isolating the degrees of freedom remaining the biorthogonality relations, we can fully control over the lifting operators to design the wavelet for a particular application, such as increasing the number of the vanishing moments.

Generation of 15 W femtosecond laser pulse from a Kerr-lens mode-locked Yb:YAG thin-disk oscillator

We demonstrated a robust power-scalable Kerr-lens mode-locked（KLM） operation based on a Yb：YAG thin-disk oscillator.15-W,272-fs pulses were realized at a repetition rate of 86.7 MHz with an additional Kerr medium and a 2.5 mm hard aperture in the cavity.247-fs pulses with an average power of 11 W could also be obtained by using a 2.4 mm hard aperture.Based on this shorter pulse,high efficient second-harmonic generation（SHG） was performed with a 1.7-mm-long Li B3O5（LBO） crystal.The SHG laser power was up to 5 W with the power fluctuation RMS of 1% measured over one hour.

Properties of periodic multicrystal configurations in walk-off-compensating second harmonic generation of ultrashort pulses

This work designs a four-platelet periodic multicrystal configuration in the second harmonic generation of ultra- short pulses as a new walk-off-compensating device. It theoretically investigates a proposed active and a typical passive compensating scheme with the undepleted-pump approximation. The result shows that the angular and spectral band- widths are proportional to the number of crystal pairs as expected, but the temperature tunability is basically unaltered owing to inter-plate pulse interference. At the same time, an analysis reveals that a misuse of the phase mismatch factor is responsible for a historic controversy about pulse interference. A real design of an ultraviolet second harmonic generation （262.5 nm） is considered in a passive periodic [3-Barium Borate-calcite configuration, where the inter-plate pulse interference is found to form an azimuthal tuning restriction and to lower plate length tolerance. A subsequent numerical simulation with pump depletion is in good accordance with theoretical prediction.

Order-Disorder Transition of Carboxyl Terminated Chains in Polydiacetylenes Vesicles Probed by Second Harmonic Generation and Two-Photon Fluorescence

To understand and control the interfacial properties of polydiacetylenes(PDAs)vesicles withπ-conjugated backbone is very important for their colorimetric sensing of chemical and biological targets.In this work,we adopted 10,12-pentacosadiynoic acid(PCDA)as the model molecule to prepare PDAs vesicles in aqueous solution with different forms(from monomer to blue-to-purple-to-red phase)by controlling the UV irradiation dose.The variations of the interfacial conformation of PDAs vesicles during chromatic transitions were inspected by the adsorption behaviors of probe molecules(4-(4-diethylaminostyry)-1-methylpyridinium iodide,D289)on vesicle surface with surface-specific second harmonic generation(SHG)and zeta potential measurements.Resonant SHG signal from D289 adsorbed on vesicle surface attenuated sharply,and the adsorption free energy as well as the corresponding two-photon fluorescence signal decreased slightly in chromatic transitions.While,the change in the surface density of the adsorbed D289 molecules for PDAs vesicles with different forms was relatively small as estimated from zeta potential measurements.The attenuation of the SHG intensity was thus attributed to the overall order-disorder transition and the changed orientation of D289 molecules caused by the gradual distortion of carboxyl head group driven by backbone perturbation.

Study of narrow-band second harmonic generation from a broad-band fundamental pulse

This paper studies the type-I phase-matched second harmonic generation using 25-fs input laser pulses in a thick BBO crystal. The harmonic signal exhibits a narrow spectrum bandwidth, even though the input pulse has a broad bandwidth. The energy transfer efficiency and modulation of the fundamental spectrum are investigated.

Surface second harmonic generation of chiral molecules using three-coupled-oscillator model

Based on the three-coupled-oscillator molecular model we proposed, the relation between the second-order susceptibilities of a chiral film and the molecular hyperpolarizabilities is given. The effect of microscopic parameters on the second-order susceptibilities is simulated numerically and the difference between the efficiencies of s-polarized secondharmonic fields induced by the left- and the right-handed circularly-polarized fundamental beams is discussed. The theoretical basis for studying second-order nonlinear optical properties of the chiral molecular media with a tripod-like structure is provided in this paper.

Effects of the second-generation larch plantations onsoil fertility and tree growth

In order to realize the effect of second generation of larch plantations on soil fertility and tree growth and to provide the theoretical base and the reasonable management measures, the growth of larch plantations for different generations at different soil conditions were inventoried and compared. The relationship between soil nutrition and tree growth of the second-generation larch plantations was analyzed. Comparing with the first generation, the second generation of larch did not present acidation phenomenon on the dark brown soil. With respect to the organic matter, rapidly available K and N, the values of the second-generation larch is close to that of first generation at later time. Platform-preparation is good measures for improving soil conditions

Second harmonic generation in inhomogeneous MgO:LiNbO_3 waveguides

A fibre laser at 1111.6 nm is frequency doubled by two inhomogeneous MgO：LiNbO3 waveguides and the output powers of 85 mW and 49 mW at 555.8 nm have been generated with the conversion efficiencies of 47% and 27% respectively. By analysing the second harmonic generation temperature tuning curves, we investigate the influence of the optical inhomogeneities upon the conversion efficiency. The final result shows that the efficiency difference is mainly affected by the optical inhomogeneities in our case.

Phase-matched second-harmonic generation in hybrid polymer-LN waveguides

Here we propose a hybrid polymer-LN waveguide for achieving phase-matched second-harmonic generation(SHG).From the aspect of super-mode theory,the geometric parameters of the hybrid semi-nonlinear waveguide were optimized to utilize both symmetric(even)and antisymmetric(odd)modes of the pump and SHG waves so as to facilitate phase matching with large modal overlap.Phase matching between a fundamental even(TE_(00)-like)mode at 1320 nm and a fundamental odd(TE_(01)-like)mode at 660 nm was found with a calculated modal overlap integral of 0.299,while utilizing the largest nonlinear coefficient d_(33),and achieving an efficient calculated normalized conversion efficiency of 148%W^(-1)·cm^(-2).Considering the fabrication feasibility of such hybrid waveguide with features including etchless,large dimension,and low structural sensitivity,we believe our findings would provide a useful reference for future on-chip efficient nonlinear conversion devices.

Second harmonic generation of metal nanoparticles under tightly focused illumination

The near-field and far-field second harmonic （SH） responses of a metal spherical nanoparticle placed in the focal region of a highly focused beam are investigated by using the calculation model based on three-dimensional finite-difference time-domain （FDTD） method. The results show that off-axis backward-propagating SH response can be reinforced by tightly focusing, due to the increase of the relative magnitude of the longitudinal field component and the phase shift along the propagation direction.

MULTIPHOTON MICROSCOPIC IMAGING OF MOUSE INTESTINAL MUCOSA BASED ON TWO-PHOTON EXCITED FLUORESCENCE AND SECOND HARMONIC GENERATION

Multiphoton microscopy(MPM),based on two-photon excited fuorescence and second harmonic generation,enables direct noninvasive visualization of tissue architecture and cell morphology in live tissues without the administration of exogenous contrast agents.In this paper,we used MPM to image the microstructures of the mucosa in fresh,unfixed,and unstained intestinal tissue of mouse.The morphology and distribution of the main components in mucosa layer such as columnar cells,goblet cells,intestinal glands,and a little collagen fibers were clearly observed in MPM images,and then compared with standard H&:E images from paired specimens.Our results indicate that MPM combined with endoscopy and miniaturization probes has the potential application in the clinical diagnosis and in vivo monitoring of early intestinal cancer.