期刊文献+
共找到92篇文章
< 1 2 5 >
每页显示 20 50 100
NUMERICAL SIMULATION OF METHANE-AIR TURBULENT JET FLAME USING A NEW SECOND-ORDER MOMENT MODEL 被引量:4
1
作者 陈兴隆 周力行 张健 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2000年第1期41-47,共7页
A new second-order moment model for turbulent combustion is applied in the simulation of methane-air turbulent jet flame. The predicted results are compared with the experimental results and with those predicted using... A new second-order moment model for turbulent combustion is applied in the simulation of methane-air turbulent jet flame. The predicted results are compared with the experimental results and with those predicted using the well-known EBU-Arrhenius model and the original second-order moment model. The comparison shows the advantage of the new model that it requires almost the same computational storage and time as that of the original second-order moment model, but its modeling results are in better agreement with experiments than those using other models. Hence, the new second-order moment model is promising in modeling turbulent combustion with NOx formation with finite reaction rate for engineering application. 展开更多
关键词 turbulent combustion second-order moment model numerical simulation
下载PDF
Comparison of a Full Second-Order Moment Model and an Algebraic Stress Two-Phase Turbulence Model for Simulating Bubble-Liquid Flows in a Bubble Column 被引量:3
2
作者 周力行 杨玟 +2 位作者 廉春英 L.S.Fan D.J.Lee 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2002年第2期142-148,共7页
A full second-order moment (FSM) model and an algebraic stress (ASM) two-phase turbulence modelare proposed and applied to predict turbulent bubble-liquid flows in a 2D rectangular bubble column. Predictiongives the b... A full second-order moment (FSM) model and an algebraic stress (ASM) two-phase turbulence modelare proposed and applied to predict turbulent bubble-liquid flows in a 2D rectangular bubble column. Predictiongives the bubble and liquid velocities, bubble volume fraction, bubble and liquid Reynolds stresses and bubble-liquidvelocity correlation. For predicted two-phase velocities and bubble volume fraction there is only slight differencebetween these two models, and the simulation results using both two models are in good agreement with the particleimage velocimetry (PIV) measurements. Although the predicted two-phase Reynolds stresses using the FSM are insomewhat better agreement with the PIV measurements than those predicted using the ASM, the Reynolds stressespredicted using both two models are in general agreement with the experiments. Therefore, it is suggested to usethe ASM two-phase turbulence model in engineering application for saving the computation time. 展开更多
关键词 second-order moment model two-phase turbulence bubble-liquid flow bubble column
下载PDF
A two-scale second-order moment two-phase turbulence model for simulating dense gas-particle flows 被引量:4
3
作者 Zhuoxiong Zeng Lixing Zhou Jian Zhang 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2005年第5期425-429,共5页
A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concepts of particle large-scale fluctuation due to turbulence and particle small-scale flu... A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concepts of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision and through a unified treatment of these two kinds of fluctuations. The proposed model is used to simulate gas-particle flows in a channel and in a downer. Simulation results are in agreement with the experimental results reported in references and are near the results obtained using the sin- gle-scale second-order moment two-phase turbulence model superposed with a particle collision model (USM-θ model) in most regions. 展开更多
关键词 Gas-particle flows .second-order moment model . Two-scale fluctuation
下载PDF
MEAN-SQUARE RADIUS OF GYRATION AND DIPOLE MOMENT OF POLY(METHYLPHENYLSILOXANE) CHAINS
4
作者 马海珠 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2008年第6期741-749,共9页
The mean-square radius of gyration <S^2>,the mean-square dipole moment <D^2>,the mean-square end-to-end distance <R^2> and their temperature coefficients of unsymmetrical disubstituted poly(methylphe... The mean-square radius of gyration <S^2>,the mean-square dipole moment <D^2>,the mean-square end-to-end distance <R^2> and their temperature coefficients of unsymmetrical disubstituted poly(methylphenylsiloxane) (PMPS) chains, as a function of stereochemical structure,confomational energies and length of polymers,were studied by using an improved configurational-confomational statistical method based on the rotational-isomeric-state theory.It is found that the increase in isotacticity of P... 展开更多
关键词 Poly(methylphenylsiloxane) Stereochemical structure Mean-square radius of gyration Mean-square dipole moment Temperature coefficient.
下载PDF
EFFECT OF EMPIRICAL COEFFICIENTS ON SIMULATION IN TWO-SCALE SECOND-ORDER MOMENT PARTICLE-PHASE TURBULENCE MODEL
5
作者 胡春波 曾卓雄 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2006年第11期1491-1497,共7页
A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concept of particle large-scale fluctuation due to turbulence and particle small-scale fluc... A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concept of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision. The proposed model is used to simulate gas-particle downer reactor flows. The computational results of both particle volume fraction and mean velocity are in agreement with the experimental results. After analyzing effects of empirical coefficient on prediction results, we can come to a conclusion that, inside the limit range of empirical coefficient, the predictions do not reveal a large sensitivity to the empirical coefficient in the downer reactor, but a relatively great change of the constants has important effect on the prediction. 展开更多
关键词 two-phase flow second-order moment model two-scale fluctuation empirical coefficients
下载PDF
SECOND-ORDER MOMENT MODEL FOR DENSE TWO-PHASE TURBULENT FLOW OF BINGHAM FLUID WITH PARTICLES
6
作者 曾卓雄 周力行 刘志和 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2006年第10期1373-1381,共9页
The USM-θ model of Bingham fluid for dense two-phase turbulent flow was developed, which combines the second-order moment model for two-phase turbulence with the particle kinetic theory for the inter-particle collisi... The USM-θ model of Bingham fluid for dense two-phase turbulent flow was developed, which combines the second-order moment model for two-phase turbulence with the particle kinetic theory for the inter-particle collision. In this model, phases interaction and the extra term of Bingham fluid yield stress are taken into account. An algorithm for USM-θ model in dense two-phase flow was proposed, in which the influence of particle volume fraction is accounted for. This model was used to simulate turbulent flow of Bingham fluid single-phase and dense liquid-particle two-phase in pipe. It is shown USM-θ model has better prediction result than the five-equation model, in which the particle-particle collision is modeled by the particle kinetic theory, while the turbulence of both phase is simulated by the two-equation turbulence model. The USM-θ model was then used to simulate the dense two-phase turbulent up flow of Bingham fluid with particles. With the increasing of the yield stress, the velocities of Bingham and particle decrease near the pipe centre. Comparing the two-phase flow of Bingham-particle with that of liquid-particle, it is found the source term of yield stress has significant effect on flow. 展开更多
关键词 Bingham fluid two-phase flow yield stress second-order moment model
下载PDF
Binding Energy, Root-Mean Square Radius and Magnetic Dipole Moment of the Nucleus 6Li
7
作者 Khadija Abdelhassan Kharroube 《Open Journal of Microphysics》 2024年第4期89-101,共13页
In this work, we have applied the translation invariant shell model with number of quanta of excitations N=2,4,6,8and 10 to define the ground-state eigenenergies and their corresponding normalized eigenstates, the roo... In this work, we have applied the translation invariant shell model with number of quanta of excitations N=2,4,6,8and 10 to define the ground-state eigenenergies and their corresponding normalized eigenstates, the root mean-square radius, and the magnetic dipole moment of the nucleus 6Li. We have computed the necessary two-particle orbital fractional parentage coefficients for nuclei with mass number A=6and number of quanta of excitations N=10, which are not available in the literature. In addition, we have used our previous findings on the nucleon-nucleon interaction with Gaussian radial dependencies, which fits the deuteron characteristics as well as the triton binding energy, root-mean square radius and magnetic dipole moment. The numerical results obtained in this work are in excellent agreement with the corresponding experimental data and the previously published theoretical results in the literature. 展开更多
关键词 Nuclear Structure The Nucleus 6Li The Translation Invariant Shell Model Binding Energy Root-Mean Square radius Magnetic Dipole moment
下载PDF
Quark Mass Dependence of Nucleon Magnetic Moment and Charge Radii 被引量:1
8
作者 MA Wei-Xing ZHOU Li-Juan +1 位作者 GU Yun-Ting PING Rong-Gang 《Communications in Theoretical Physics》 SCIE CAS CSCD 2005年第2X期333-336,共4页
Understanding hadron structure within the framework of QCD is an extremely challenging problem. Our purpose here is to explain the model-independent consequences of the approximated chiral symmetry of QCD for two famo... Understanding hadron structure within the framework of QCD is an extremely challenging problem. Our purpose here is to explain the model-independent consequences of the approximated chiral symmetry of QCD for two famous results concerning the quark structure of the nucleon. We show that both the apparent success of the constituent quark model in reproducing the ratio of proton to neutron magnetic moments and the apparent success of the Foldy term in reproducing the observed charge radius of the neutron are coincidental. That is, a relatively small change of the current quark mass would spoil both results. 展开更多
关键词 quark mass nucleon magnetic moment nucleon charge radius
下载PDF
Relativistic description of second-order correction to nuclear magnetic moments with point-coupling residual interaction 被引量:7
9
作者 LI Jian MENG Jie +2 位作者 RING Peter YAO JiangMing ARIMA Akito 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2011年第2期204-209,共6页
Using the single particle states and the residual interaction derived from the relativistic point-coupling model with the PC-F1 parameter set,the second-order core polarization corrections to nuclear magnetic moments ... Using the single particle states and the residual interaction derived from the relativistic point-coupling model with the PC-F1 parameter set,the second-order core polarization corrections to nuclear magnetic moments of LS closed shell nuclei ±1 nucleon with A = 15,17,39 and 41 are studied and compared with previous non-relativistic results.It is found that the second-order corrections are significant.With these corrections,the isovector magnetic moments of the concerned nuclei are well reproduced,especially those for A = 17 and A = 41. 展开更多
关键词 second-order core polarization magnetic moments relativistic point-coupling model residual interaction
原文传递
Second-order moment modeling of dispersed two-phase turbulence——Part 1:USM,k-ε-k_p,and non-linear k-ε-k_p two-phase turbulence models 被引量:4
10
作者 ZHOU LiXing 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2011年第6期1098-1107,共10页
Turbulent dispersed multiphase flows,including gas-particle,gas-droplet and bubble-liquid flows,are widely encountered in various engineering facilities.Modeling of two-phase turbulence,in particular the dispersed pha... Turbulent dispersed multiphase flows,including gas-particle,gas-droplet and bubble-liquid flows,are widely encountered in various engineering facilities.Modeling of two-phase turbulence,in particular the dispersed phase turbulence,is the key problem in the Eulerian-Eulerian simulation of practical dispersed multiphase flows.Although different models were developed and used,the experimental validation shows that they cannot always give satisfactory prediction results.In this paper the present author give a detailed review of the unified second-order moment (USM),k-k p and nonlinear k-k p two-phase turbulence models,proposed by him.The derivation and closure of these models are described in detail and the experimental validation and application of these models are extensively discussed. 展开更多
关键词 dispersed multiphase flows second-order moment model two-phase turbulence
原文传递
A TWO-SCALE SECOND-ORDER MOMENT PARTICLE TURBULENCE MODEL FOR GAS-PARTICLE FLOW 被引量:5
11
作者 ZENG Zhuo-xiong ZHOU Li-xing 《Journal of Hydrodynamics》 SCIE EI CSCD 2006年第6期659-665,共7页
A two-scale second-order moment two-phase turbulence model was developed and used to simulate gas-particle flow in a sudden-expansion chamber and a channel. The simulation results were in agreement with the experiment... A two-scale second-order moment two-phase turbulence model was developed and used to simulate gas-particle flow in a sudden-expansion chamber and a channel. The simulation results were in agreement with the experimental results, and the results were compared with those of the single-scale second-order moment two-phase turbulence model. Several improved features show that the two-scale model is to a certain extent better than the single-scale model, which may be attributed to the fact that particle turbulence is well characterized by the two-scale turbulence model. 展开更多
关键词 gas-particle flow second-order moment model two-scale fluctuation
原文传递
Second-order moment modeling of dispersed two-phase turbulence-Part 2-USM-Θ two-phase turbulence model and USM-SGS two-phase stress model 被引量:2
12
作者 ZHOU LiXing 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2011年第7期1296-1303,共8页
Dense gas-particle flows are frequently encountered in fluidized beds,riser and downer reactors,pneumatic transport and the near-wall zone of dilute gas-particle flows.Particle-particle collision plays an important ro... Dense gas-particle flows are frequently encountered in fluidized beds,riser and downer reactors,pneumatic transport and the near-wall zone of dilute gas-particle flows.Particle-particle collision plays an important role in the behavior of two-phase flows.In this paper a USM-Q two-phase turbulence model for dense gas-particle flows is proposed to account for both two-phase turbulence and inter-particle collision.For two-fluid large-eddy simulation of gas-particle flows,the author proposed a unified second-order moment(USM) two-phase SGS stress model and a two-phase k-kp SGS energy-equation stress model.The proposed models can fully account for the interaction between the gas and particle SGS stresses. 展开更多
关键词 densed gas-particle flows second-order moment model two-phase turbulence large-eddy simulation
原文传递
双金属复合管屈曲失效机理及临界载荷研究
13
作者 肖世轩 吕志阳 +2 位作者 朱学铭 曲琳 梁学泉 《石油机械》 北大核心 2024年第5期138-144,共7页
为探究双金属复合管的屈曲失效机理,利用ABAQUS软件建立了双金属复合管有限元模型,考虑成型残余应力的存在,分析了弯曲过程中弯矩、椭圆度和内衬褶皱幅值随曲率的变化规律;研究了内衬管屈服强度、内衬管径厚比以及外基管径厚比对双金属... 为探究双金属复合管的屈曲失效机理,利用ABAQUS软件建立了双金属复合管有限元模型,考虑成型残余应力的存在,分析了弯曲过程中弯矩、椭圆度和内衬褶皱幅值随曲率的变化规律;研究了内衬管屈服强度、内衬管径厚比以及外基管径厚比对双金属复合管屈曲失效的影响,并进一步给出了临界弯矩和临界曲率的预测公式。分析结果表明:屈服强度更高的内衬管可提高复合管的临界弯矩,但会降低复合管的临界曲率;更小的内衬管径厚比和外基管径厚比均可提高复合管的临界弯矩和临界曲率;相较于临界弯矩,内衬管屈服强度和径厚比的改变对临界曲率影响更为明显,外基管径厚比的改变则对两者均具有十分明显的影响;临界弯矩和临界曲率公式预测结果与有限元计算结果的相对误差不超过4%和12%。所得结论可为双金属复合管的设计和安全评价提供参考依据。 展开更多
关键词 双金属复合管 屈曲失效 内衬褶皱 径厚比 临界弯矩 临界曲率
下载PDF
用于模式识别的极半径不变矩 被引量:16
14
作者 曹茂永 孙农亮 郁道银 《计算机学报》 EI CSCD 北大核心 2004年第6期860-864,共5页
提出了用于目标物识别和分类的极半径不变矩 .对目标物进行分割后 ,先求出目标物的形心 ,进而求出极半径矩、归一化矩和归一化的中心矩 .在此基础上 ,给出了 5个具有平移、旋转和尺度变换不变性的特征量用于物体形状的识别 .文中给出了... 提出了用于目标物识别和分类的极半径不变矩 .对目标物进行分割后 ,先求出目标物的形心 ,进而求出极半径矩、归一化矩和归一化的中心矩 .在此基础上 ,给出了 5个具有平移、旋转和尺度变换不变性的特征量用于物体形状的识别 .文中给出了这些不变矩的特性 ,并给出了极半径不变矩和边界序列矩以及Hu提出的不变矩的实验比较结果 .该文提出的极半径不变矩 ,既可用于区域目标的识别 ,也可用于边界形状的识别 . 展开更多
关键词 模式识别 极半径不变矩 区域目标识别 边界序列矩 边界形状识别
下载PDF
不变矩方法研究 被引量:15
15
作者 魏伟波 芮筱亭 《火力与指挥控制》 CSCD 北大核心 2007年第11期114-117,共4页
不变矩方法是一种比较经典的特征提取方法。自1962年Hu提出代数不变矩以来,已被成功应用于很多领域。首先介绍了不变矩的基本理论以及Hu提出的七个不变矩,并对不变矩的物理含义进行了分析。利用Matlab编程后,对给定目标图像旋转、缩放... 不变矩方法是一种比较经典的特征提取方法。自1962年Hu提出代数不变矩以来,已被成功应用于很多领域。首先介绍了不变矩的基本理论以及Hu提出的七个不变矩,并对不变矩的物理含义进行了分析。利用Matlab编程后,对给定目标图像旋转、缩放后图像的不变矩进行了计算,给出了计算结果,并与原图像的不变矩进行了比较,分析了不变矩方法的特点。最后介绍了一种适用范围更广的极半径不变矩,与Hu不变矩进行了比较。 展开更多
关键词 不变矩 物理含义 计算 极半径不变矩
下载PDF
基于信任力矩的网络资源选择模型 被引量:2
16
作者 刘玉玲 杜瑞忠 +1 位作者 田俊峰 袁鹏 《通信学报》 EI CSCD 北大核心 2012年第4期85-92,共8页
提出了基于信任力矩的网格资源选择模型,将网格资源按类型划分为多个可信资源域,每个域的网格资源由其域代理负责组织管理,通过对资源节点进行信任评估,依靠历史交易经验、当前资源属性和个人偏好综合判断,实现了既注重用户资源选择的... 提出了基于信任力矩的网格资源选择模型,将网格资源按类型划分为多个可信资源域,每个域的网格资源由其域代理负责组织管理,通过对资源节点进行信任评估,依靠历史交易经验、当前资源属性和个人偏好综合判断,实现了既注重用户资源选择的服务质量,又能满足用户需求偏好的资源选择算法。通过仿真实验验证了模型的可行性和有效性。 展开更多
关键词 网格 资源选择 信任引力 信任半径 信任力矩
下载PDF
多层微通道平行流式换热器绕弯成形工艺 被引量:5
17
作者 张志伟 张卿卿 +2 位作者 唐鼎 李大永 彭颖红 《塑性工程学报》 CAS CSCD 北大核心 2011年第4期106-111,共6页
研究了多层微细通道平行流式换热器的绕弯成形过程。基于绕弯成形机理和LS-DYNA软件平台建立了多层换热器的有限元模型,并通过实验的方法,研究了换热器层数和弯曲力矩之间的关系及换热器和翅片的变形情况,验证了有限元模型的可靠性。利... 研究了多层微细通道平行流式换热器的绕弯成形过程。基于绕弯成形机理和LS-DYNA软件平台建立了多层换热器的有限元模型,并通过实验的方法,研究了换热器层数和弯曲力矩之间的关系及换热器和翅片的变形情况,验证了有限元模型的可靠性。利用验证过的有限元模型,分析了不同的翅片形状及弯曲半径对换热器成形质量的影响。研究结果表明,随着换热器层数的增加,弯曲力矩呈线性增加;对于不同形状的翅片,三角形翅片更适合微细通道平行流式换热器的弯曲成形;在一定范围内,较大弯曲半径更有利于换热器的弯曲成形。 展开更多
关键词 微细通道平行流式换热器 弯曲力矩 翅片形状 弯曲半径 有限元法
下载PDF
轮-履式移动机器人履带转向运动 被引量:6
18
作者 帅立国 苏慧哲 +1 位作者 郑丽媛 费燕琼 《哈尔滨工程大学学报》 EI CAS CSCD 北大核心 2017年第10期1630-1634,共5页
针对室内外不同工作环境对移动机器人的结构有不同的要求,本文设计了一种的模块化的轮-履式移动机器人,描述了该轮-履式移动机器人纯轮式、纯履带式及轮履混合式等不同的运动模式;基于该机器人模块化的履带式结构特性,依据刚体平面运动... 针对室内外不同工作环境对移动机器人的结构有不同的要求,本文设计了一种的模块化的轮-履式移动机器人,描述了该轮-履式移动机器人纯轮式、纯履带式及轮履混合式等不同的运动模式;基于该机器人模块化的履带式结构特性,依据刚体平面运动理论,分析了该机器人的转向运动条件;基于转向阻力矩模型,建立了该轮-履式移动机器人完成履带式转向运动的约束方程。仿真和实验证明,此种轮-履式移动机器人地形适应能力强,在履带运动模式下,采取大的转向半径及小的转向比可有效减少机器人的转向阻力矩,能很好地完成转弯运动。 展开更多
关键词 轮履 运动模式 移动机器人 转向运动 模块化 阻力矩 转向半径 转向比
下载PDF
东南沿海地区中强地震震前地震矩释放研究 被引量:3
19
作者 李盛 张慧 +1 位作者 李志雄 郭昱琴 《华南地震》 2018年第1期31-38,共8页
对1970年以来东南沿海地震地区的中强地震的地震前矩释放进行研究,获取了东南沿海地区18次M_L≥5.0以上地震前一定搜索半径内(100 km和150 km)地震矩释放的空间分布图和时序变化图。结果表明:在搜索半径内地震目录G关系符合线性特征的... 对1970年以来东南沿海地震地区的中强地震的地震前矩释放进行研究,获取了东南沿海地区18次M_L≥5.0以上地震前一定搜索半径内(100 km和150 km)地震矩释放的空间分布图和时序变化图。结果表明:在搜索半径内地震目录G关系符合线性特征的情况下,当搜索半径为100 km时,12个地震震前存在地震矩加速释放现象;当搜索半径150 km情况时,9个地震震前存在地震矩加速释放现象。因此,相对而言,搜索半径为100 km时,存在地震矩加速释放现象的地震比例更高。 展开更多
关键词 地震矩 搜索半径 加速 减速
下载PDF
波纹钢板截面几何性质计算 被引量:13
20
作者 张敏 李百建 《科学技术与工程》 北大核心 2012年第10期2400-2403,共4页
在应力和应变计算中,将要用到截面的几何性质。以材料力学为基础,计算了波纹钢板的截面面积、惯性矩、截面模量、回转半径,同时也介绍了利用CAD软件计算图形的几何性质。最后通过算例验算计算公式的正确性。
关键词 波纹钢板 截面面积 惯性矩 截面模量 回转半径 转轴公式
下载PDF
上一页 1 2 5 下一页 到第
使用帮助 返回顶部