Application of 9-component S-wave 3D seismic data to study sedimentary facies and reservoirs in a biogasbearing area:A case study on the Pleistocene Qigequan Formation in Taidong area,Sanhu Depression,Qaidam Basin,NW China

To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.

Evolutions of sedimentary facies and palaeoenvironment and their controls on the development of source rocks in continental margin basins:A case study from the Qiongdongnan Basin,South China Sea

Hydrocarbon resources in the Qiongdongnan Basin have become an important exploration target in China.However,the development of high-quality source rocks in this basin,especially in its deep-water areas,are still not fully understood.In this study,evolutions of sedimentary facies and palaeoenvironment and their influences on the development of source rocks in diverse tectonic regions of the Qiongdongnan Basin were investigated.The results show that during the Oligocene and to Miocene periods,the sedimentary environment of this basin progressively varied from a semi-closed gulf to an open marine environment,which resulted in significant differences in palaeoenvironmental conditions of the water column for various tectonic regions of the basin.In shallow-water areas,the palaeoproductivity and reducibility successively decrease,and the hydrodynamic intensity gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In deep-water areas,the water column of the Yacheng and Lingshui strata has a higher palaeoproductivity and a weaker hydrodynamic intensity than that of the Sanya-Meishan strata,while the reducibility gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In general,the palaeoenvironmental conditions of the water column are the most favorable to the development of the Yacheng organic-rich source rocks.Meanwhile,the Miocene marine source rocks in the deep-water areas of the Qiongdongnan Basin may also have a certain hydrocarbon potential.The differences in the development models of source rocks in various tectonic regions of continental margin basins should be fully evaluated in the exploration and development of hydrocarbons.

Automatic discrimination of sedimentary facies and lithologies in reef-bank reservoirs using borehole image logs

Reef-bank reservoirs are an important target for petroleum exploration in marine carbonates and also an essential supplemental area for oil and gas production in China. Due to the diversity of reservoirs and the extreme heterogeneity of reef-banks, it is very difficult to discriminate the sedimentary facies and lithologies in reef-bank reservoirs using conventional well logs. The borehole image log provides clear identification of sedimentary structures and textures and is an ideal tool for discriminating sedimentary facies and lithologies. After examining a large number of borehole images and cores, we propose nine typical patterns for borehole image interpretation and a method that uses these patterns to discriminate sedimentary facies and lithologies in reeI^bank reservoirs automatically. We also develop software with user-friendly interface. The results of applications in reef-bank reservoirs in the middle Tarim Basin and northeast Sichuan have proved that the proposed method and the corresponding software are quite effective.

Cenozoic uplift of the Tibetan Plateau:Evidence from the tectonic-sedimentary evolution of the western Qaidam Basin

Geologists agree that the collision of the Indian and Asian plates caused uplift of the Tibet Plateau. However, controversy still exists regarding the modes and mechanisms of the Tibetan Plateau uplift. Geology has recorded this uplift well in the Qaidam Basin. This paper analyzes the tectonic and sedimentary evolution of the western Qaidam Basin using sub-surface seismic and drill data. The Cenozoic intensity and history of deformation in the Qaidam Basin have been reconstructed based on the tectonic developments, faults growth index, sedimentary facies variations, and the migration of the depositional depressions. The changes in the sedimentary facies show that lakes in the western Qaidam Basin had gone from inflow to still water deposition to withdrawal. Tectonic movements controlled deposition in various depressions, and the depressions gradually shifted southeastward. In addition, the morphology of the surface structures in the western Qaidam Basin shows that the Cenozoic tectonic movements controlled the evolution of the Basin and divided it into （a） the southern fault terrace zone, （b） a central Yingxiongling orogenic belt, and （c） the northern fold-thrust belt; divided by the XI fault （Youshi fault） and Youbei fault, respectively. The field data indicate that the western Qaidam Basin formed in a Cenozoic compressive tectonic environment caused by the India--Asia plate collision. Further, the Basin experienced two phases of intensive tectonic deformation. The first phase occurred during the Middle Eocene--Early Miocene （Xia Ganchaigou Fm. and Shang Ganchaigou Fro., 43.8- 22 Ma）, and peaked in the Early Oligocene （Upper Xia Ganchaigou Fro., 31.5 Ma）. The second phase occurred between the Middle Miocene and the Present （Shang Youshashan Fro. and Qigequan Fro., 14.9-0 Ma）, and was stronger than the first phase. The tectonic--sedimentary evolution and the orienta- tion of surface structures in the western Qaidam Basin resulted from the Tibetan Plateau uplift, and recorded the periodic northward growth of the Plateau. Recognizing this early tectonic--sedimentary evolution supports the previous conclusion that northern Tibet responded to the collision between India and Asia shortly after its initiation. However, the current results reveal that northern Tibet also experi- enced another phase of uplift during the late Neogene. The effects of these two stages of tectonic activity combined to produce the current Tibetan Plateau.

Sedimentary environments controlled by tectonics and induced differential subsidence:A perspective in the Permian Liangshan and Qixia Formations,northwestern Sichuan Basin,China

Based on field observation,core description and well logging analysis,the tectonic-sedimentary framework of the Liangshan and Qixia Formations in the northwestern Sichuan Basin,China is deeply discussed.Two long-term sequence cycles were identified,denoted as LSC1 and LSC2,respectively.The sequence stratigraphic framework was established,suggesting the Liangshan Formation to be not isochronously deposited.Paleogeomorphy before deposition of LSC1 was reconstructed by the impression method.LSC1 was featured by thin,low-energy shoal deposits in the high topography,and thick inter-shoal sea and open sea deposits in the low topography.Meanwhile,paleogeomorphy before deposition of LSC2 was reconstructed using the residual thickness method,which was demonstrated to have primary high-energy,thick shoal deposits in the high topography,and thin inter-shoal and open sea deposits in the low topography.The results show that differential tectonic subsidence has already taken place during the Qixia Period,and thus the Dongwu Movement should occur earlier than previously expected.Meanwhile,pre-depositional paleogeomorphy has obvious controlling effects on the sequence stratigraphic filling and sedimentary facies distribution.Results of this study were expected to provide practical guidance to fine characterization of the sedimentary evolution process and prediction of high-quality reservoir distribution.

Detailed sedimentary facies of a sandstone reservoir in the eastern zone of the Sulige gas field, Ordos Basin

Given sustaining exploration, the eastern zone of the Sulige gas field may soon become a key area of exploitation. In order to explore its genesis, types and distribution of the reservoir sandstones in the eastern zone of this gas field, we focused in our study on the provenance and detailed sedimentary facies of sandstone of the He8 （the eighth part of the Shihezi formation, Permian system） and Shanxil （the first part of the Shanxi formation, Permian system） members, based on core observations, analyses in petrography, granularity and logging. The results show that： 1） the sandstone provenance of Shanxil and He8 in the eastern zone of the Sulige gas field is from the north of the Ordos Basin, characterized by dual directions from the north and northeast. 2） The He8 and Shanxil members were deposited in a fluvial-delta sedimentary system. The He8 was mainly deposited in braided rivers, in- cluding braided channels, channel bars, levee and floodplain sub-environments, whereas the Shanxil Member was deposited in braided rivers and deltas, including braided channels, channel bars, floodplains, tributaries and inter-tributary sub-environments. 3） Sedimentary facies bands migrated in drastic fashion towards the basin from the Shanxil to the He8 Member. Base levels of sedi- mentation generally present a trend of small increases in-amplitude, large decreasing amplitudes and slow and gradual Increases. 4） The continuity of the reservoir sandbodies along the source direction is better than that perpendicular to the direction. Compared with Shanxil, both dimensions and continuity of the sandbodies in He8 are better from which we conclude that it is the most fa- vorable part of the reservoir.

Reconstruction of paleo river systems and distribution of sedimentary facies of Shanxi and lower Shihezi formations in southern Ordos basin

The study area is located in the south of Huanxian county,in Yan'an and Puxian counties and to the north of Xi'an.The Shanxi and lower Shihezi formations are important gas-bearing formations.Given our analysis of the direction of rivers,the contents of stable heavy minerals and of feldspar of palaeo river systems,the study area is divided into six palaeodrainage patterns corresponding to six feldspar regions and six sedimentary facies regions.On this basis,the distribution of sedimentary facies was also analyzed.During the Shanxi stage,a delta front was deposited in the Huanxian region and delta plains and fronts were deposited in the Pingliang,Chunhua-Yaoxian and Hancheng-Chengcheng regions.In the Yan'an-Daning region,only a delta front was developed.The distribution of sedimentary facies in the earlier Shihezi stage originated from the Shanxi stage.A delta front was developed in the Huanxian region while a delta plain and front developed in the Pingliang-Zhenyuan region during the same time.Lakes originated only in the Zhenyuan-Huanxian-Huachi-Zhengning and Daning-Jixian zones.This analytical method shows that different palaeodrainage patterns can be effectively distinguished in order to forecast sedimentary facies.

Research on 3D Distribution of Meandering River Sand Body Using Sedimentary Facies Method and 3D Geological Modeling

Sedimentary facies study is an important method in describing the property and distribution of reservoir. 3D geological modeling is a powerful tool in 3D characterization of geological bodies. By combining the sedimentary facies study with 3D geological modeling to generate 3D sedimentary facies model, the 3D geometry and distribution feature of sand bodies can be more accurately characterized, particularly in 3D view. In Liuchu oilfield of Jizhong depression, the Ed2IV formation was recognized as meandering river deposition facies and five sedimentary facies were identified, which include point bar sand, levee, channel margin, abandoned channel and floodplain. All the 24 sand body facies in Ed2IV were mapped and the 3D sedimentary facies model established based on 2D facies maps. The result shows that the 3D sedimentary facies model is well matched for the research result of sedimentary facies. Being an extension of traditional sedimentary study, the 3D sedimentary facies model can be used to describe the 3D geometry and distribution orders of a single sand body more reliably and more accurately.

The sedimentary facies and dynamic environment of the Diaokou lobe in the modern Huanghe River Delta of China

The Huanghe River captures the Diaokou River in 1964 and forms a deltaic lobe in the subsequent 12 a. The progradational process of the Diaokou lobe is in associated with complicated evolution of riverine sheet flooding, merging, and swinging. On the basis of 11 borehole cores and 210 km high resolution seismic reflection data set, the sedimentary sequence and dynamic environment of the Diaokou lobe Cone subdelta lobe of the modern Huanghe River Delta） are studied. The stratigraphy of the lobe is characterized by an upward-coarsening ternary structure and forms a progradational deltaic clinoform. Totally six seismic surfaces are identifiable in seismic profiles, bounded six seismic units （SUs）. These SUs correspond to six depositional units （DUs） in the borehole cores, and among them, SUs 4-6 （DUs D to F） consist of the modern Diaokou lobe. Lithological and seismic evidences indicate that the delta plain part of the Diaokou lobe is comprised primarily by fluvial lag sediments together with sediments from sidebanks, overbanks, fluvial flood plains and levees, while the delta front part is a combination of river mouth bar sands （majority） and distal bar and deltaic margin sediments （minority）. As a result of the high sedimentation rate and weak hydrodynamic regime in the Huanghe River Delta, the sediments in the delta front are dominated by fine-grained materials. The grain size analysis indicates the Huanghe River hyperpycnal-concentrated flow shows the suspension, transportation and sedimentation characteristics of gravity flow, and the sediment transportation is primarily dominated by graded suspension, while uniform suspension and hydrostatic suspension are also observed in places. The strength of the hydrodynamic regime weakens gradually offshore from riverbed, river mouth bar, sidebank, distal bar subfacies to delta lateral margin and flooding plain subfacies.

The Features of Sedimentary Facies and Copper Enrichment Metallogenic Regularities of Kuzigongsu Group in Sareke Glutenite Type Copper Deposits,Wuqia,Xinjiang

1 Introduction Sareke glutenite-type copper deposit is the large size copper deposit discovered in recent years,and it is located Sarekebayi intracontinental pull-apart basin in the western margin of the Tarim basin.Conglomerate of

A Study of Sedimentary Environment and Reservoir Quality of the Carboniferous Donghe Sandstonein the Tarim Basin

Very thick, fine-grained quartzose sandstone of the Lower Carboniferous (called the Donghe sandstone) was discovered in Donghe-1 well in the Tarim basin. Highly-productive commercial oil and gas flows were obtained when a well completion test was conducted. This important discovery proved that the quartzose sandstone is a prospecting target with good prospects. After that, other two paying oil and gas flows were found in the Lower Carboniferous in the Tazhong-4 and Tazhong-10 structures (Tazhong means central Tarim), equivalent to the Donghe sandstone. The Tazhong-4 structural oil field is the biggest oil field ever discovered. Therefore it is of guiding importance in oil and gas exploration to deepen the study of sedimentary and reservoir features and the sedimentary environment of the Donghe sandstone and to build a sedimentary model in order to understand the reservoir distribution pattern.

Sedimentary facies of the subaqueous Changjiang River delta since the late Pleistocene

The sedimentary facies of the subaqueous Changjiang （Yangtze） River delta since the late Pleistocene was studied based on lithology and foraminifera analysis for two boreholes, CJK07 and CJK11, along with 14C dating. Four sedimentary facies were identified, namely fluvial, tidal flat, offshore, and prodelta facies. The fluvial sedimentary facies is comprised of fluvial channel lag deposits, fluvial point bar deposits, and floodplain deposits, showing a fining-upward sequence in general with no benthic foraminifera. A layer of stiff clay overlies the fluvial deposits in core CJK07, indicating a long-term exposure environment during the Last Glacial Maximum （LGM）. During the postglacial sea-level rise around 13-7.5 cal ka BP, the tidal flat facies was deposited in core CJK11, characterized by abundant silt-clay couplets. Euryhaline species dominate the subtidal fiat foraminiferal assemblages, while almost no foraminifera was found in the intertidal fiat. The offshore environment was the major sedimentary environment when the sea level reached its highest level around 7.5 cal ka BP, with a maximum accumulation rate of 10 mm/a found in core CJK11. Prodelta sediments have been deposited in core CJK11 since -3 cal ka BP, after the formation of the Changjiang River delta. The difference in sedimentary facies between core CJK07 and CJK11 is due to their location： core CJK07 was in an interfluve while core CJK11 was in an incised valley during the LGM. Furthermore, AMS 14C dating of core CJK07 shows poor chronological order, indicating that the sediments were reworked by strong tidal currents and that sediment deposited since -7.7 cal ka BP in core CJK07 was eroded away by modem hydrodynamic forces caused by the southward shift of the Changjiang River delta depocenter.

The Sedimentary System and Evolution of the Early Tertiary in the Sunda Basin, Indonesia

The Sunda basin is located at the north of the Sunda Strait situated between Sumatra and Java islands, Indonesia. It is an early Tertiary typical half-graben basin, in which developed a series of terrigenous clastic sedimentation. Previous work suggested that the early Tertiary sediments were alluvial, fluvial, lacustrine and swamp deposits, of which the Banuwati formation was alluvial and lacustrine deposits, the Zelda member fluvial deposits, and Gita member fluvial and swamp deposits. In this paper, based on the integrated research on core lithology （including lithology succession and structure）, well log shape, and seismic reflection characteristics, a more detailed sedimentation system was set up as follows： l） In addition to the alluvial, lacustrine, fluvial and the swamp deposits presented in previous work, subaqeous fan, shore-shallow lacustrine, deep lacustrine and turbidite fan, fan delta and delta deposits also developed in this basin. 2） Alluvial fan, subaqeous fan and fan delta deposits occurred on the steep slope adjacent to the synrift boundary fault; while the deltaic depositional system usually distributed on the gentle slope of the basins. 3） The Zelda member that was interpreted as a fluvial deposit in previous work is now interpreted as a subaqueous fan, fan delta, delta and lacustrine deposit system. 4） From the point of view of sedimentology, the evolution of basin could be divided into four stages： the initial subsidence （matching the Banuwati formation）, the rapid subsidence （matching the low Zelda member of Talang Akar formation）, the steady subsidence or fluctuation （matching the middle Zelda member of Talang Akar formation）, and the uplifting （matching the upper Zelda member and the Gita member of Talang Akar formation）. At the initial subsidence stage, the alluvial fan, flood plain, braided stream deposits developed, and then subaqeous fan sedimentation; at the rapid subsidence stage, shore-shallow lacustrine and deep lacustrine deposits and turbidite fans occurred; at the steady subsidence stage, thick fan deltas and delta sandstones developed; and at the uplifting stage, came fluvial （including meandering fiver and the anastomosed stream） and swamp sediments. Sediment supply was mainly from the northwest, secondly from the east. From the beginning to the end of the terrigenous basin evolution, the area of sedimentation was gradually enlarged. The palaeo-topography became increasingly flat.

High resolution continuous sedimentary records of Upper Cretaceous obtained from the continental drilling(SK-1) borehole in Songliao Basin:Sifangtai and Mingshui Formations

The Sifangtai and Mingshui formations were continuously cored in the SK-1 n borehole（China Cretaceous Continental Scientific Drilling-SongKe1-the north borehole）.The core is 767.96 m long,and the recovery is 94.7%.The ages of the formations range from middle Campanian to Danian.The sequence and process of lithology-lithofacies and cyclic stratigraphy were described in detail.Eight litho-types compose the Sifangtai Formation,and 15 litho-types compose the Mingshui Formation.Deposition was predominantly in meandering river and lacustrine environments,including 10 microfacies in the Sifangtai Formation and 15 microfacies in the Mingshui Formation.The complete sequence is composed of 535 m-scale cycles（sixth-order cycle）,152 fifth-order cycles,42 fourth-order cycles and five third-order cycles.The centimeter-scale description of the section revealed some previously unknown horizons such as a special type of mudstone,marl,volcanic ash and favorable sand reservoirs in the formations.The new-found evidence is very important for the interpretation of the evolution of the basin,conditions such as lake oxic events,the K/Pg boundary,tectonism in the late sag basin stage,and the reservoir-cap rock assemblages in the shallow stratigraphy.

Sedimentary facies characteristics and organic matter enrichment mechanism of lower Cambrian Niutitang Formation in South China

The purpose of this study was to examine the sedimentary facies characteristics of lower Cambrian Niutitang Formation(∈1n)in South China,to reveal the mechanism of organic matter enrichment,and to guide exploration of shale gas.Macro investigation and experimental analyses were used to assess the lithology in detail,total organic matter mass fraction w(TOC),mineral composition,and trace element characteristics of∈1n.The influencing factors of organic matter enrichment were discussed extensively,and a sedimentary facies mode was suggested.In the early stage of∈1n,the locations of Well E’yangye 1,Well Ciye 1,Well Changye 1,and Well Anye 1 respectively develop,platform inner sag,outer shelf,Jiangnan slope belt,and South China detention basin.In the late stage of∈1n,the sedimentary facies evolve with decreasing sea level.The study area presents a complete three-step basin in the Early Cambrian.In the early stage of∈1n,the first step is the Yangtze carbonate platform,the second step is the outer shelf and slope,and the third step is the deep-water basin.From the Yangtze carbonate platform to the deep-water basin,w(TOC)and the mass fraction of quartz gradually increase,the mass fraction of carbonate mineral decreases,and the mass fraction of clay mineral is higher in the second step.The sea level fluctuation results in a higher w(TOC)vertically in the lower∈1n shale,and the paleogeographic(provenance)conditions lead to better horizontal development of organic matter in the outer shelf,slope and detention basin.Trace elements are abundant in the lower∈1n,and w(TOC)is correlated positively with many trace elements.In the outer shelf,slope,and adjacent areas,hydrothermal activity and upwelling current bring nutrient-rich material and promote organic matter enrichment under a strong reducing condition.Deep-shelf,slope and deep-water basin are the best facies for the formation and preservation of organic matter,especially deep-water basin facies.It remains necessary to strengthen the exploration of shale gas in the deep-water basin of∈1n in central Hunan,China.

The Sedimentary Evolution During Late Triassic-Jurassic Period and the Hydrocarbon Exploration Direction in the Eastern Part of the Qiangtang Basin, Tibet

Based on the field outcrops surveyed,combined with recent published the regional tectonic evolution and geochronology data,we analyzed the lithologies and rock associations of strata,identified the sedimentary facies types,and discussed the distribution sedimentary facies and the hydrocarbon accumulation in the eastern Qiangtang basin during the Late Triassic–Jurassic.Marked by regional unconformities,there are two tectono-stratigraphic units(from the Carnian to the Norian and from the Rhaetian to the Kimmeridgian,respectively)in the eastern part of Qiangtang basin.We systematically described the distribution range,thickness variation and lithological characteristics of different formations in the tectonostratigraphic units.The Late Triassic-Jurassic is dominated by marine facies and marine-continental transitional facies.The marine-continental transitional facies include deltaic and tidallagoon facies.Marine facies including gentle carbonate slope,evaporative platform,restricted platform,littoral,neritic,bathyal and abysmal facies.The Carnian stage is dominated by littoral–neritic–bathyal–abysmal facies in the north Qiangtang depression otherwise the littoral–neritic facies in the south Qiangtang depression.The early Norian stage is dominated by carbonate gentle slope-mixed continental shelf facies.The late Norian,Bajocian,Callovian and Kimmeridgian stage are dominated by tidal flat-delta facies in the north Qiangtang depression and littoral-neritic facies in the south Qiangtang depression.The Bathonian and Oxfordian stage are dominated by evaporative platform-restricted platform-mixed continental shelf facies.The sedimentary facies formed zones from north to south and extended in an E–W direction.The Eastern Lower Uplift(ELU)played an important role in the division zones of sedimentary facies from north to south.During the Bathonian and Oxfordian,the ELU developed below the sea level and controlled the distribution of restricted platform,evaporative platform and platform margin.We analyzed 20 source rock samples from the upper Triassic-Jurassic.The total organic carbon(TOC)value from Qoimaco,Buqu and Adula Formations.of late TriassicJurassic in the eastern Qiangtang basin are ranges from 0.17~0.33%(average 0.28%),0.05~0.25%(average 0.15%)and 10.32~28.78%(average 19.33%),respectively.Obviously,the Adula Fm.developed good source rocks.The values of Tmax and S1+S2 in the Adula formation are 459-461℃(average 460℃)and 6.75-28.55 mg/g(average 18.18 mg/g),indicating that the Adula source rock has reached high-over-maturity stage.The bathyal,gentle slop and platform facie belts of the Upper Triassic can configurate the good hydrocarbon prospects in the northeastern area of the Qiangtang basin.

Sequence Stratigraphy and Sedimentary Facies of Feixianguan Formation in the Kaijiang-Liangping Area of Sichuan Basin, China

The Feixianguan formation in the Kaijiang-Liangping basin has been the focus of extensive research on multiple aspects. Based on field survey, core observation, laboratory analysis and seismic data interpretation, the sequence stratigraphy and sedimentary facies of the Kaijiang-Liangping area are studied. Four sequence boundaries and three maximum flooding surfaces of the Feixianguan formation are detected in this area. Three third-order sequences are identified as first sequence (SQ1), the second sequence (SQ2), and the third sequence (SQ3) in which SQ1 corresponds to the member 1 of the Feixianguan formation, SQ2 corresponds to the member 2, and SQ3 corresponds to the member 3 and member 4. Member 1, 2, 3 and 4 are lithologic sections divided by predecessors. On the basis of this sequence division and their sedimentary marks, the facies of the Feixianguan formation can be divided into open platform and evaporate platform categories. The open platform is composed of three subfacies identified as platform bank or basin marginal bank, interbank, and platform basin. Thus, a sedimentary evolution model is established. According to the sedimentary and seismic characteristics of the Kaijiang-Liangping area, we determine that two oolitic bank models, the aggradation model and the progradation model, are developed in this area. The aggradation model is developed in the Longgang region, which includes the basin marginal bank as a favorable exploring zone. The progradation model is developed in the Jiulongshan and Longhui areas, besides the basin marginal bank, the favorable exploration zones also include the oolitic bank developing areas of the inner basin.

Sedimentary Facies Architectures of Third-Order Sequences from Early to Middle Triassic in Nanpanjiang Basin

There are complex and regular changes on sedimentary facies from the Early to the Middle Triassic in the Nanpanjiang basin. After the obvious drowned event of carbonate platforms in the transitional period between Permian and Triassic, carbonate platforms have evolved into the ramp type from the rimmed shelf type. The differentiation of sedimentary facies becomes clearer in space, which are marked by the changes from an attached platform to a turbidity basin and several isolated platforms in the basin. The striking characteristics are the development of oolitic banks on isolated platforms in Nanning and Jingxi and the reef and bank limestones in the margin of the attached platform in the Early Triassic. Despite the difference of the time span and the architecture of facies succession of third order sedimentary sequences, the process of the third order relative sea level changes reflected by the sedimentary facies succession of the third order sequences is generally synchronous. Therefore, six third order sequences could be discerned in the strata from the Early to the Middle Triassic in the Nanpanjiang basin. Using two types of facies changing surfaces and two types of diachronisms in stratigraphic records as the key elements, the sedimentary facies architectures of the third order sequences that represent sequence stratigraphic frameworks from the Early to the Middle Triassic in the Nanpanjiang basin could be constructed.

Sedimentary characteristics and processes of the Paleogene Dainan Formation in the Gaoyou Depression, North Jiangsu Basin, eastern China

In this paper,the type,vertical evolution,and distribution pattern of sedimentary facies of the Paleogene Dainan Formation in the Gaoyou Depression of the North Jiangsu Basin are studied in detail.Results show that fan delta,delta,nearshore subaqueous fan,and lacustrine facies developed during the Dainan Formation period and their distribution pattern was mainly controlled by tectonics and paleogeography.The fan delta and nearshore subaqueous fan facies predominantly occur in the southern steep slope region where fault-induced subsidence is thought to have created substantial accommodation,whereas the delta facies are distributed on the northern gentle slope which is thought to have experienced less subsidence.Finally,the lacustrine facies is shown to have developed in the center of the depression,as well as on the flanks of the fan delta,delta,and nearshore subaqueous fan facies.Vertically,the Dainan Formation represents an integrated transgressiveregressive cycle,with the E2d1being the transgressive sequence and the E2d2being the regressive sequence.This distribution model of sedimentary facies plays an important role in predicting favorable reservoir belts for the Dainan Formation in the Gaoyou Depression and similar areas.In the Gaoyou Depression,sandstones of the subaqueous distributary channels in the fan delta and the subaqueous branch channels in the delta are characterized by physical properties favorable for reservoir formation.

Lower Jurassic Sequence Stratigraphy and Sedimentary Facies on the North Slope of Mount Qomolangma

The Lower Jurassic is subdivided in ascending order into the Wulong, Kangdui and Yongjia Formations on the north slope of Mount Qomolangma, with a total thickness of 1362 m. They are thought to have been deposited respectively in the environments of the carbonate ramp fault-bounded basins and carbonate platform, with six sedimentary facies and six sub-facies. During the Early Jurassic, the Qomolangma area experienced strong faulting and subsidence, and was of a matured rift basin. The Lower Jurassic consists of eleven 3rd-order sequences, which can be grouped into three 2nd-order sequences and form a large transgressive-regressive cycle. The 3rd-order sequences and the corresponding sea-level changes recognized in the area can be correlated quite well with those set up in the western Tethys, and may have been caused by the eustatic fluctuations, while the 2nd-order sequences seem to be more closely related to the basement subsidence and the variation in sedimentary influx, indicating the evolution of the eastern Neotethys and the movement of the plates on its two sides.