Sedimentary Features and Sea-Level Changes Reflected in Drill Holes in the Zhuhai Area

Abstract Experimental examinations and analyses have been made of the sediments from drill holes in the Zhuhai area, Guangdong Province. The studies show that there occurred four transgressions in this area over the historical times. The first transgression occurred at 7500 a B.P., with the maxium sea level up to about 1 m above the present level. The second transgression occurred at 5750 a B.P., with the sea level possibly 4 m higher than the present. The third and fourth transgressions took place at 4650 a B.P. and 2600 a B.P. respectively, which lasted for a long time with multiple fluctuations. The fifth transgression is in process. It could be predicted that the sea level at Zhuhai would rise by 15–20 cm in the coming 50 years.

Jurassic sedimentary features and tectonic settings of southeastern China

Two types of the Jurassic basins are distinguished in SE China based on their geodynamic features: the Late Triassic-Early Jurassic post-orogenic basins and the Middle Jurassic intra-continental extensional basins. The Lower Jurassic sequence shows a change from coarseto fine-grained accumulation, suggesting a gradually deepening depositional environment from river to shore-lake and to deep-water lake. In contrast, the Middle Jurassic accumulation was changed from claystone to conglomerate along the coastal provinces in SE China, indicative of an initial crustal uplift. The Wuyi Mountains have been a paleogeograghic separating zone since the Middle Jurassic. The Late Jurassic strata are absent in most areas of SE China. A large-scale bimodal intra-continental rift-type volcanism occurred during the Middle Jurassic along a 40-60 km wide and 200 km long area in western Fujian and southern Jiangxi provinces, which is most likely the strongest volcanism in SE China since the Cambrian. The SHRIMP zircon U-Pb analyses on the rhyolite from the Dongkeng basin in the southern Jiangxi area yield a concord U-Pb age of 160±0.5 Ma, providing an upper age limit for the bimodal volcanic eruption. The analyses of the basin features indicate a change of the depositional environment during the interval from Middle Triassic to Late Triassic from a shallow-sea to an intra-continent in SE China in response to the strong collision between the Yangtze and North China Blocks. Sedimentary structures record a southward direction of Early Jurassic paleo-currents, reflecting that their source areas were to the north side. We propose that the Wuyi region was uplifted as early as Middle Jurassic, followed by a wide E-W-trending extended depression and bimodal volcanism in the western foot of the Wuyi Mountains. Presumably the uplift of the Wuyi domain changed the Middle Jurassic paleo geographic outline and formed the transformational tectonic regime from compression to extension as a tectonic response to the Pacific plate subduction.

Sedimentary features of the Permian-Triassic boundary sequence of the Meishan section in Changxing County,Zhejiang Province

The Global Stratotype Section and Point(GSSP) for the Permian-Triassic boundary was placed in Bed 27 of Meishan section D where the conodont species Hindeodus parvus first occurs.Bed 27 was usually considered comprising continuouslydeposited,homogeneous silty limestone,with no depositional hiatus near the boundary.Detailed study on the boundary sequence revealed that a typical firmground characterized by Glossifungites ichnofacies developed about 2 cm below the Permian-Triassic boundary in Bed 27.Fossil content and lithology show apparent differences across the firmground crust.The abundance of the Permian bioclasts decreases significantly across the firmground,and is accompanied by a shift of dominating carbonate precipitation from calcite to dolomite.The firmground marked a rapid transgression at the very end of the Late Permian and significant shifts of sedimentary environment and paleoclimate.This transgressive submerging surface is also observed at the Huangzhishan section of the shallow-water carbonate platform facies in Zhejiang Province,the Jiangya section of the lower-slope to basinal-margin facies in Hunan Province,the Pingdingshan section of the basinal facies in Anhui Province of South China,as well as the Selong section in Tibet of the northern peri-Gondwana.The transgressive submerging surface marks the onset of a rapid global transgression at the latest Permian.

The Features of Sedimentary Facies and Copper Enrichment Metallogenic Regularities of Kuzigongsu Group in Sareke Glutenite Type Copper Deposits,Wuqia,Xinjiang

1 Introduction Sareke glutenite-type copper deposit is the large size copper deposit discovered in recent years,and it is located Sarekebayi intracontinental pull-apart basin in the western margin of the Tarim basin.Conglomerate of

Geological Features of Devonian Sedimentary Basins in South China and Their Deposition and Mineralization

The Devonian succession in South China is well-known for its complete development, vari-fied sedimentary types, remarkable lithofacies variation and abundant mineral resources. The South China plate was formed by the collision and collage of the Yangtze plate and the Cathaysian plate. The collision began approximately at the Jinningian stage and the collage was not finalized until the Guangxian movement. It was on the South China plate with a somewhat different nature of the basement that the Devonian deposition formed.

Petrographic Features and Sedimentary Environments of the Middle-Upper Ordovician at Shetai Town of Urad Front Banner, Inner Mongolia

Most of the hinterland of the North China platform is devoid of Late Ordovician strata. The BaiyanhuaMountain section at Shetai Town is a standard section of the Upper Ordovician newly established in recentyears at the northernmost margin of the platform. This establishment directly involved the determination of thenorth boundary of the platform and the understanding of its evolutionary Listory. The area is quite differentfrom the binterland of the platform in Middle Ordovician rock types and sedimentary environments, with theformer characterized by frequent slope deposits and the latter consisting almost entirely of platform deposits.The present paper focuses on the petrographic features and sedimentary ervironments of the Middle-UpperOrdovician strata in the area, providing further theoretical support to the establishment of the section and fil-ling the gap in this respect.

Topographic and geomorphological features and tectogenesis of the southern section of the Kyushu-Palau Ridge(KPR)and its adjacent areas

The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of the Shikoku and Parece Vela basins.Based on surveyed data of massive high-resolution multibeam bathymetric data and sub-bottom profiles data collected from the southern section of the KPR from 2018 to 2021,this paper analyzes the topographic and geomorphological features,shallow sedimentary features,and tectonic genesis of the southern section of the KPR,obtaining the following conclusions.The southern section of the KPR has complex and rugged topography,with positive and negative topography alternatingly distributed and a maximum height difference of 4086 m.The slope of seamounts in this section generally exceeds 10°and is up to a maximum of 59°.All these contribute noticeably discontinuous topography.There are primarily nine geomorphological types in the southern section of the KPR,including seamounts,ridges,and intermontane valleys,etc.Among them,seven independent seamount groups are divided by five large troughs,forming an overall geomorphological pattern of seven abyssal seamount groups and five troughs.This reflects the geomorphological features of a deep oceanic ridge.Intramontane basins and intermontane valleys in the southern section of the KPR are covered by evenly thick sediments.In contrast,sediments in ridges and seamounts in this section are thin or even missing,with slumps developing locally.Therefore,the sediments are discontinuous and unevenly developed.The KPR formed under the control of tectonism such as volcanic activities and plate movements.In addition,exogenic forces such as underflow scouring and sedimentation also play a certain role in shaping seafloor landforms in the KPR.

Coarse grain deposit feature of Guantao formation in western depression Shuyi area of Liaohe basin

The extensive distribution of coarse-grained clastic rock of Guantao formation in Shuyi area of Liaohe basin was considered as a result of fluvial deposit. According to the comprehensive analysis of seism data, well log, core observation and experimental data, this kind of clastic rock is composed of pebblestone-cobblestone, microconglomerate, sand conglomerate, medium-coarse grained sandstone and fine-sandstone. According to the clast composition, sedimentary texture, structure and rock type, 3 kinds of sediment facies can be recognized ie the mixed accumulation-conglomerate dominated debris flow, pebblestone-cobblestone dominated gradient flow and sandstone dominated braided stream. Vertically, the bottom gradient current deposit and top braided stream deposit form fining-upward sediment sequence, and the debris flow deposit distributes in them at random. The sedimentary feature of coarse grain clastic of Guantao formation in Shuyi area is accordant with proximal wet alluvial fan deposited in wet climate at foreland and this kind of alluvial fan is different from the traditional one.