Mapping of QTLs Related to Grain Weight Using Chromosome Single Segment Substitution Lines in Rice

Grain weight, one of the major factors determining rice yield, is a typical quantitative trait control ed by multiple genes. With Guangluai 4 as recipient and Nipponbare as donor, a population of 119 chromosome single segment substitution lines had been developed. Correlation analysis between grain weight and grain shape by SPSS revealed that 1 000-grain weight shared extremely significant posi-tive correlation with grain length and length-width ratio, but no significant correlation with grain width and thickness. The QTL analysis of grain weight was carried out using one-way analysis of variance and Dunnett＇s test. Nineteen stable QTLs re-sponsible for grain weight were identified over two years. Al 19 QTLs were identi-fied on al chromosomes except for chromosome 10 and 12 at a significance level of P≤0.001. Among them, 10 QTLs had a positive effect and were derived from the Nipponbare al ele, the additive effect of these QTLs ranged from 0.49 to 2.74 g, and the contributions of the additive effects ranged from 2.00% to 11.05%. Another 9 QTLs had a negative effect and were al derived from Guangluai 4 al ele, the ad-ditive effect of these QTLs ranged from 0.60 to 2.35 g, and the contributions of the additive effects ranged from 2.40% to 9.84%. The results provide a basis for the fine mapping and gene cloning of novel locus associated with rice grain weight.

QTLs Mapping for Salinity Tolerance at Seedling Stage or Rice(Oryza sativa L.) Using Chromosome Segment Substitution Lines

In this study, a population of chromosome segment substitution lines （CSSLs） derived from the cross between 9311 （indica） and Nipponbare （japonica） was employed to map the quantitative trait loci （QTLs） for salt tolerance under the salt stress simulated with 0.5% NaCI, using survival rate as the index. The data were analyzed by QTL IciMapping v3.1, and the results showed that one QTL （QSsr3） related to salt tolerance was located in the vicinity of the marker RM1350 on chromosome 3, into a genetic interval of 113.2-132.8 cM, with a contribution rate of 17.75%. The additive effect was 10.9, indicating that the QTL derived from the parent Nipponbare improved the salt tolerance of rice at seedling stage. This study will provide a theoretical basis for the selection of salt tolerant rice germplasm.

Mapping QTLs Associated with Sheath Blight Resistance Using Chromosome Segment Substitution Lines of Rice(Oryza sativa L.)

In this study, a population of 119 chromosome segment substitution lines （CSSLs） derived from backcross between indica 9311 and japonica Nipponbare was employed to map quantitative trait loci （QTL） associated with sheath blight resis-tance in rice with toothpick inoculation method. A total of three sheath blight resis-tance-associated QTLs （qsb8-1, qsb8-2 and qsb8-3） were identified, which were lo-cated on adjacent molecular markers RM3262, RM5485 and RM3496 of chromo-some 8; the genetic interval was 81.7cM-91.7cM, 91.7cM-108.1cM and 108.1cM-119.6cM, respectively. The additive effect of qsb8-2 was negative, indicating that sheath blight resistance of susceptible parent harboring qsb8-2 fragment was en-hanced; additive effects of qsb8-1 and qsb8-3 were positive, indicating that sheath blight resistance of susceptible parent harboring qsb8-1 and qsb8-3 fragments was reduced.

Unconditional and Conditional QTL Mapping for Tiller Numbers at Various Stages with Single Segment Substitution Lines in Rice(Oryza sativa L.)

Tiller is one of the most important agronomic traits which influences quantity and quality of effective panicles and finally influences yield in rice. It is important to understand ＂static＂ and ＂dynamic＂ information of the QTLs for tillers in rice. This work was the first time to simultaneously map unconditional and conditional QTLs for tiller numbers at various stages by using single segment substitution lines in rice. Fourteen QTLs for tiller number, distributing on the corresponding substitution segments of chromosomes 1, 2, 3, 4, 6, 7 and 8 were detected. Both the number and the effect of the QTLs for tiller number were various at different stages, from 6 to 9 in the number and from 1.49 to 3.49 in the effect, respectively. Tiller number QTLs expressed in a time order, mainly detected at three stages of 0-7 d, 14-21 d and 35-42 d after transplanting with 6 positive, 9 random and 6 negative expressing QTLs, respectively. Each of the QTLs expressed one time at least during the whole duration of rice. The tiller number at a specific stage was determined by sum of QTL effects estimated by the unconditional method, while the increasing or decreasing number in a given time interval was controlled by the total of QTL effects estimated by the conditional method. These results demonstrated that it is highly effective and accurate for mapping of the QTLs by using single segment substitution lines and the conditional analysis methodology.

Identification of QTLs for Plant Height and Its Components by Using Single Segment Substitution Lines in Rice (Oryza sativa)

QTLs for plant height and its components on the substituted segments of fifty-two single segment substitution lines （SSSLs） in rice were identified through t-test （P〈0.001） for comparison between each SSSL and recipient parent Huajingxian 74. On the 14 substituted segments, 24 QTLs were detected, 10 for plant height, 2 for panicle length, 4 for length of the first internode from the top, 5 for length of the second internode from the top and 3 for length of the third internode from the top, respectively. All these QTLs were distributed on nine rice chromosomes except chromosomes 5, 9 and 11. The additive effect ranged from -4.08 to 3.98 cm, and the additive effect percentages varied from -19.35% to 10.43%.

Identification of Multiple Alleles at the Wx Locus and Development of Single Segment Substitution Lines for the Alleles in Rice

The microsatellite markers 484/485 and 484/W2R were used to identify the multiple alleles at the Wx locus in rice germplasm. Fifteen alleles were identified in 278 accessions by using microsatellite class and G-T polymorphism. Among these alleles, （CT）12-G, （CT）15-G, （CT）16-G, （CT）17-G, （CT）18-G and （CT）21-G have not been reported. Seventy-two single-segment substitution lines （SSSLs） carrying different alleles at the Wx locus were developed by using Huajingxian 74 with the （CT）11-G allele as a recipient and 20 accessions containing 12 different alleles at the Wx locus as donors. The estimated length of the substituted segments ranged from 2.2 to 77.3 cM with an average of 17.4 cM.

Detection of QTL for Cold Tolerance at Bud Bursting Stage Using Chromosome Segment Substitution Lines in Rice (Oryza sativa)

Ab The cold tolerance at the bud bursting stage （CTB） was evaluated at 5℃ by using a set of 95 chromosome segment substitution lines （CSSLs） derived from an indica rice 9311 and a japonica rice Nipponbare with a genetic background of 9311. The result showed that six CSSLs had slightly stronger effect on CTB than 9311. Total four quantitative trait loci （QTLs） for CTB were preliminary mapped on chromosomes 5 and 7 by substitution mapping, qCTB-5-1, qCTB-5-2 and qCTB-5-3 were mapped in the region of RM267-RM1237, RM2422-RM6054 and RM3321-RM1054, which were 21.3 cM, 27.4 cM and 12.7 cM in genetic distance on rice chromosome 5, respectively, qCTB-7 was mapped in a 6.8-cM region of RM11-RM2752 on rice chromosome 7.

QTL Detection for Rice Grain Shape Using Chromosome Single Segment Substitution Lines

Rice grain shape is one of the important factors affecting grain quality and yield,but it is liable to be influenced by genetic backgrounds and environments.The chromosome single segment substitution lines(SSSLs) in rice have been considered as ideal populations to identify the quantitative trait loci(QTLs).In this study,22 QTLs affecting rice grain shape were detected to be distributed on eight chromosomes except chromosomes 6,9,11 and 12 by using SSSLs.Among them,seven QTLs conditioned grain length,six conditioned grain width,five affected grain length-width ratio and four controlled grain thickness.

Development of Chromosomal Segment Substitution Lines from a Backcross Recombinant Inbred Population of Interspecific Rice Cross

A backcross recombinant inbred line population consisting of 202 lines was developed from Xieqingzao B//Xieqingzao B / Dongxiang wild rice. The population was assayed with DNA markers and phenotyped on planthopper resistance and yield traits. A linkage map consisting of 119 DNA markers and spanned for 1188 cM over the 12 rice chromosomes was constructed. Thirty-two chromosomal segment substitution lines were selected based on the percentage of Xieqingzao B allele at marker loci. These lines are of great potential for gene mapping and alien gene introgression.

QTL Mapping for Rice RVA Properties Using High-Throughput Re-sequenced Chromosome Segment Substitution Lines

The rapid visco analyser （RVA） profile is an important factor for evaluation of the cooking and eating quality of rice. To improve rice quality, the identification of new quantitative trait loci （QTLs） for RVA profiling is of great significance. We used a japonica rice cultivar Nipponbare as the recipient and indica rice 9311 as the donor to develop a population containing 38 chromosome segment substitution lines （CSSLs） genotyped by a high-throughput re-sequencing strategy. In this study, the population and the parent lines, which contained similar apparent amylose contents, were used to map the QTLs of RVA properties including peak paste viscosity （PKV）, hot paste viscosity （HPV）, cool paste viscosity （CPV）, breakdown viscosity （BKV）, setback viscosity （SBV）, consistency viscosity （CSV）, peak time （PET） and pasting temperature （PAT）. QTL analysis was carried out using one-way analysis of variance and Dunnett＇s test, and stable QTLs were identified over two years and under two environments. We identified 10 stable QTLs： qPKV2-1, qSBV2-1; qPKV5-1, qHPV5-1, qCPV5-1; qPKV7-1, qHPV7-1, qCPV7-1, qSBV7-1; and qPKV8-1 on chromosomes 2, 5, 7 and 8, respectively, with contributions ranging from -95.6% to 47.1%. Besides, there was pleiotropy in the QTLs on chromosomes 2, 5 and 7.

Characterization of chromosome segment substitution lines reveals candidate genes associated with the nodule number in soybean

Soybean is one of the most important food crops worldwide.Like other legumes,soybean can form symbiotic relationships with Rhizobium species.Nitrogen fixation of soybean via its symbiosis with Rhizobium is pivotal for sustainable agriculture.Type Ⅲ effectors(T3Es)are essential regulators of the establishment of the symbiosis,and nodule number is a feature of nitrogen-affected nodulation.However,genes encoding T3Es at quantitative trait loci(QTLs)related to nodulation have rarely been identified.Chromosome segment substitution lines(CSSLs)have a common genetic background but only a few loci with heterogeneous genetic information;thus,they are suitable materials for identifying candidate genes at a target locus.In this study,a CSSL population was used to identify the QTLs related to nodule number in soybean.Single nucleotide polymorphism(SNP)markers and candidate genes within the QTLs interval were detected,and it was determined which genes showed differential expression between isolines.Four candidate genes(GmCDPK28,GmNAC1,GmbHLH,and GmERF5)linked to the SNPs were identified as being related to nodule traits and pivotal processes and pathways involved in symbiosis establishment.A candidate gene(GmERF5)encoding a transcription factor that may interact directly with the T3E NopAA was identified.The confirmed CSSLs with important segments and candidate genes identified in this study are valuable resources for further studies on the genetic network and T3Es involved in the signaling pathway that is essential for symbiosis establishment.

Evaluation of Agronomic Traits in Chromosome Segment Substitution Lines of KDML105 Containing Drought Tolerance QTL under Drought Stress

Drought is a major abiotic constraint to rice production in rainfed lowland and insufficiently irrigated areas. The improvement of drought tolerant varieties is one of the strategies to reduce the negative effects of drought. Quantitative trait loci （QTLs） for primary and secondary traits related to drought tolerance （DT） on chromosomes 1, 3, 4, 8 and 9 that determined from double haploid lines derived from a cross between CT9993 and IR62266 were introgressed and dissected into small pieces in the genetic background of Khao Dawk Mall 105 （KDML105） to develop chromosome segment substitution line （CSSL） population. The CSSLs were evaluated at the reproductive stage for their agronomic performance and yield components under drought stress, and results were compared with irrigated condition. The flowering of CSSL lines was 6 to 7 d earlier than KDML105. The mean values of grain yields in the CSSLs were higher than KDML105 under drought and irrigated conditions. At irrigated condition, the grain yields of introgression lines carrying DT-QTLs from chromosomes 4 and 8 were higher than that of KDML105, whereas other traits showed little difference with KDML105. Analysis indicated that grain yield has positive correlation with plant height, tiller and panicle number per plant, and total grain weight per plant under drought stress while negatively correlated with days to flowering. As mentioned above, CSSLs showing good adaptation under drought stress can be used as genetic materials to improve drought tolerance in Thai rainfed lowland rice breeding program, and as materials to dissect genes underlying drought tolerance.

Positional Error Model of Line Segments with Modeling and Measuring Errors Using Brownian Bridge

Spatial linear features are often represented as a series of line segments joined by measured endpoints in surveying and geographic information science.There are not only the measuring errors of the endpoints but also the modeling errors between the line segments and the actual geographical features.This paper presents a Brownian bridge error model for line segments combining both the modeling and measuring errors.First,the Brownian bridge is used to establish the position distribution of the actual geographic feature represented by the line segment.Second,an error propagation model with the constraints of the measuring error distribution of the endpoints is proposed.Third,a comprehensive error band of the line segment is constructed,wherein both the modeling and measuring errors are contained.The proposed error model can be used to evaluate line segments’overall accuracy and trustability influenced by modeling and measuring errors,and provides a comprehensive quality indicator for the geospatial data.

Sonar Image Registration and Mosaic Based on Line Detection and Triangle Matching

Image registration is an important research topic in the field of computer vision,in which the registration and mosaic of side-scan sonar images is the keypoints of underwater navigation.However,the image registration method of keypoints is not suitable for sonar images which do not have obvious feature points.Therefore,a method of sonar-image registration and mosaic based on line segment extraction and triangle matching is proposed in this paper.Firstly,in order to extract features from sonar image,the LSD method is introduced to detect line feature from images,and line segments are filtered by the principle of attention;after that,triangles are formed from line segments,an image transformation matrix can be calculated through the heuristic greedy algorithm from these triangles;finally,images are merged based on the transformation information.On the basis of practical tests,it is found that,the feature extraction method used in this paper can better describe the outline of underwater terrain,and there is no obvious stitching gap between the result of sonar images stitched.Experimental results show that the proposed method is effective than the keypoints method of the registration and mosaic of sonar images.

A Fingerprint Minutiae Matching Method Based on Line Segment Vector

Minutiae-based fingerprint matching is the most commonly used in an automatic fingerprint identification system. In this paper, we propose a minutia matching method based on line segment vector. This method uses all the detected minutiae （the ridge ending and the ridge bifurcation） in a fingerprint image to create a set of new vectors （line segment vector）. Using these vectors, we can determine a truer reference point more efficiently. In addition, this new minutiae vector can also increase the accuracy of the minutiae matching. By experiment on the public domain collections of fingerprint images fvc2004 DID set A and DB4 set A, the result shows that our algorithm can obtain an improved verification performance.

Line clipping against polygonal window algorithm based on the multiple virtual boxes rejecting

This paper presents a new algorithm for line clipping against a polygonal window by exploiting the local relationship between each line segment and the polygon. Firstly, a minimal enclosing box （MEB） of the polygon is adopted to reject the invisible line segments located outside the MEB. Secondly, a 45° rotated box is used to encode the endpoint of the line segment, and then reject a portion of the invisible segments crossing polygon comers. Finally, instead of encoding the endpoints of all line segments with respect to the polygonal window, each vertex of the polygon is encoded, taking the line segment to be clipped as reference. For efficient encoding of the polygon vertices, a new concept, termed with slope adaptive virtual box, is introduced regarding each line segment. Such a box can not only conveniently reject all totally invisible lines lying outside the MEB conveniently, but also precisely identify the edges of the polygon with which the line segment potentially intersects. With the summation of the vertex codes, it can be verified whether the line segment is separated from or potentially intersects the polygon window. Based on the product of the codes of adjacent vertices, singular cases of intersection can be solved accurately. Experimental results demonstrate the efficiency and stability of the new algorithm.

Line Segment Optimization Algorithm for High Resolution Optical Remote Sensing Image Based on Geometric and Texture Constraints

Aiming at the problem that high-resolution optical remote sensing image,lines are prone to fracture,and a line segment optimization algorithm is proposed in this paper.Firstly,the line segment is regarded as a way to express the contour of the ground object,and the laws of line segment fracture from two aspects of geometric features and texture features are analyzed;Secondly,the line segment optimization algorithm is proposed.It takes the results of detecting line segments as the processing primitives,determines the initial optimized line segment according to the length of the line segment,establishes the tracking rectangular region and geometric constraint model for the fractured line segments,builds a dynamic optimization model,and gives a complete line optimization process.Through the analysis of experimental results of multiple actual scenes and different types of remote sensing images,it is shown that this algorithm can not only solve the problem of line segment fracture caused by terrain occlusion,edge blurring,and edge serration,but also comparing with other methods,the proposed algorithm has great advantages in optimizing line length and restraining over extraction problem.

QTL Detection and Epistasis Analysis for Heading Date Using Single Segment Substitution Lines in Rice(Oryza sativa L.)

Heading date of rice is a key agronomic trait determining cultivated areas and seasons and affecting yield. In the present study, ifve primary single segment substitution lines with the same genetic background were used to detect quantitative trait loci （QTLs） for heading date in rice. Two QTLs, qHD3 and qHD6 on the short arm of chromosome 3 and the short arm of chromosome 6, respectively, were identiifed under natural long-day （NLD）. Nineteen secondary single segment substitution lines （SSSLs） and seven double segments pyramiding lines were designed to map the two QTLs and to evaluate their epistatic interaction between them. By overlapping mapping, qHD3 was mapped in a 791-kb interval between SSR markers RM3894 and RM569 and qHD6 in a 1 125-kb interval between RM587 and RM225. Results revealed the existence of epistatic interaction between qHD3 and qHD6 under natural long-day （NLD）. It was also found that qHD3 and qHD6 had signiifcant effects on plant height and yield traits, indicating that both of the QTLs have pleiotropic effects.

Optimal design scheme based on the segmental transmission line methodology for high-frequency interconnection in 3D micro/nano integration

With the continuous growth of signal frequency and package density, discontinuity of the high-frequency interconnection in 3 D micro/nano integration becomes unavoidable, which results in serious signal integrity problems. Traditional interconnection design schemes, such as termination and shielding/isolation, cannot meet the requirements under the unified constraints of specific cost, space occupancy, and performance. In this study, a transmission line design optimization scheme based on the segmental transmission line(STL) methodology is proposed. The genetic algorithm is used to select the optimal segment structure parameters of the transmission line to construct an STL with satisfying transmission performance or meet the specific signal amplitude adjustment requirements. This scheme can be adapted to various signal transmission scenarios to significantly improve the signal loss caused by reflection or other negative electromagnetic factors and meet the requirements for the modeling of discontinuous transmission lines. The simulation results show that this scheme is effective in the design scenario of performance improvement or equivalent modeling of discontinuous transmission lines and has significant advantages in circuit area reduction.

General Entropy Model of Line Segments Uncertainty in GIS

Spatial data uncertainty can directly affect the quality of digital products and GIS-based decision making. On the basis of the characteristics of randomicity of positional data and fuzziness of attribute data, taking entropy as a measure, the stochastic entropy model of positional data uncertainty and fuzzy entropy model of attribute data uncertainty are proposed. As both randomic-ity and fuzziness usually simultaneously exist in linear segments, their omnibus effects are also investigated and quantified. A novel uncertainty measure, general entropy, is presented. The general entropy can be used as a uniform measure to quantify the total un-certainty caused by stochastic uncertainty and fuzzy uncertainty in GIS.