The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole p...The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole production activities in the process of oil and gas development.The authors applied the DAS system in a gas production well in the South China Sea for in situ monitoring of the whole wellbore for the first time and obtained the distributed acoustic signals along the whole wellbore.These signals can clearly distinguish the vertical section,curve section,and horizontal production section.The collected acoustic signal with the frequency of approximately 50 Hz caused by the electric submersible pump exhibit a signal-to-noise ratio higher than 27 dB.By analyzing the acoustic signals in the production section,it can be located the layers with high gas production rates.Once an accurate physical model is built in the future,the gas production profile will be obtained.In addition,the DAS system can track the trajectory of downhole tools in the wellbore to guide the operation.Through the velocity analysis of the typical signals,the type of fluids in the wellbore can be distinguished.The successful application of the system provides a promising whole wellbore acoustic monitoring tool for the production of marine gas hydrate,with a good application prospect.展开更多
The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed ...The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed in the laboratory - optical fiber grating sensor for force measurement of anchor cable (OFBFMAC). No similar report about this kind of sensor has been found up to now in China and other countries. This sensor is proved to be an effective way of monitoring in processes of anchor cable installation, cable cutting, cable force regulation, etc, with the accurate and repeatable measuring results. Its successful application in the tie bar cable force safety monitoring for Wuhan Qingchuan bridge is a new exploration of optical fiber grating sensing technology in bridge tie bar monitoring system.展开更多
This paper presents a novel laser⁃induced fluorescence(LIF)Lidar system for marine oil spilling detection.A bifurcated Y⁃type optical fiber and an optical collimating lens compose a coaxial configuration transceiver f...This paper presents a novel laser⁃induced fluorescence(LIF)Lidar system for marine oil spilling detection.A bifurcated Y⁃type optical fiber and an optical collimating lens compose a coaxial configuration transceiver for this LIF⁃Lidar system.This LIF⁃Lidar system was further applied to measure the excitation spectra from floating oil slicks with different thicknesses on top of seawater at different distances.The system presents several advantages such as compact structure,stable optical path,and convenient operation,which offers a wide application prospect in ocean exploration.展开更多
Abstract: A new pyrometer, which can solve the affection of emissivity change in temperature measuring, has been developed by double Y - type optical fibers. The mathematical model of the new pyrometer is presented an...Abstract: A new pyrometer, which can solve the affection of emissivity change in temperature measuring, has been developed by double Y - type optical fibers. The mathematical model of the new pyrometer is presented and the errors of the new pyrometer are analyzed.展开更多
Salinity is an important property of industrial and natural waters. It is defined as the measure of the mass of dissolved salts in a given mass of solution. High salinity has an impact on people and industries reliant...Salinity is an important property of industrial and natural waters. It is defined as the measure of the mass of dissolved salts in a given mass of solution. High salinity has an impact on people and industries reliant on water. High levels of salt can reduce crop yields, limit the choice of crops that can be grown and, at higher concentrations over long periods, can kill trees and make the land unsuitable for agricultural purposes. Salinity increases the “hardness” of water, which can mean more soap and detergents have to be used or water softeners installed and maintained. This can also cause scaling in pipes and heaters. The experimental determination of the salt content by drying and weighing presents some difficulties due to the loss of some components. The only reliable way to determine the true or absolute salinity of natural water is to make a complete chemical analysis. However, the method is time consuming and cannot yield the precision necessity for accurate work. Thus to determine salinity, one normally used method involves the measurement of a physical property such as conductivity, density or refractive index. The paper reports the refractometric fiber optic sensor for detection of salinity of water. The mathematical model is developed for detection of the refractive index of liquid and simulated in MATLAB. The fiber optic sensor probe is developed to measure the refractive index of the solution containing different amount of salt dissolved in water i.e. different molar concentrations. Experiments are carried out using the developed probe for these solutions. Experimental results are showing good agreement with the simulated results.展开更多
变压器热点温度作为运行经济性、安全性的关键指标,是设备在线监测及状态评估中的重点。该文对变压器内部散热进行研究,着眼于饼式绕组及其油道结构,基于能量流向建立绕组温度变化的物理模型。基于这一模型,在一台内置分布式传感光纤的1...变压器热点温度作为运行经济性、安全性的关键指标,是设备在线监测及状态评估中的重点。该文对变压器内部散热进行研究,着眼于饼式绕组及其油道结构,基于能量流向建立绕组温度变化的物理模型。基于这一模型,在一台内置分布式传感光纤的110kV三相ONAN变压器上开展试验研究,使用分布式光纤测温(distributed temperature sensing,DTS)技术对运行状况下的绕组整体温度分布进行实时监测,分析绕组在ONAN冷却方式下的散热状况。在变压器启动初期,绕组各处散热量较低,温升速率较快。约2 h后,各饼散热量基本与损耗相一致,散热率可达98%以上,因此将这一阶段称为准稳态。准稳态阶段,绕组整体散热率基本一致。负载变化前期不同位置散热量的差异是温度梯度形成的主要原因。基于DTS手段及散热器进出口处油温,提出绕组每饼平均对流换热系数的计算方法,基于无量纲数建立绕组内外表面局部对流换热系数的计算方法,对不同位置、负载率下两种对流换热系数的变化规律进行分析获得了绕组运行过程中对流换热系数分布规律及变化趋势。展开更多
We report the design and analysis of a rod-type photonic crystal fiber with Er-Yb co-doped for the high power 1.5-μm band amplifier.The fiber structure is designed to be the 120-μm extreme large core diameter,300-μ...We report the design and analysis of a rod-type photonic crystal fiber with Er-Yb co-doped for the high power 1.5-μm band amplifier.The fiber structure is designed to be the 120-μm extreme large core diameter,300-μm inner cladding diameter,and 1.5-mm outer cladding diameter that ensure the single mode output during high power amplification.Both the continuous wave(CW) and pulsed amplification characteristics are analyzed based on the exact modeling and simulation under the designed geometry.The 4-mJ pulse energy and 400-kW peak power are obtained in theory,so the 1.5-μm band amplifier that achieves milojoule level pulse energy meanwhile keeping single mode is firstly designed.展开更多
基金jointly supported by the Science and Technology Program of Guangzhou (202103040003)the offshore NGHs production test projects under the Marine Geological Survey Program initiated by the China Geological Survey (DD20190226, DD20190218 and DD20221706)+2 种基金the Key Program of Marine Economy Development Special Foundation of Department of Natural Resources of Guangdong Province (GDNRC [2020] 045)the financial support from China Geological Survey (DD20221703)the National Natural Science Foundation of China (NSFC) (6210030553)。
文摘The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole production activities in the process of oil and gas development.The authors applied the DAS system in a gas production well in the South China Sea for in situ monitoring of the whole wellbore for the first time and obtained the distributed acoustic signals along the whole wellbore.These signals can clearly distinguish the vertical section,curve section,and horizontal production section.The collected acoustic signal with the frequency of approximately 50 Hz caused by the electric submersible pump exhibit a signal-to-noise ratio higher than 27 dB.By analyzing the acoustic signals in the production section,it can be located the layers with high gas production rates.Once an accurate physical model is built in the future,the gas production profile will be obtained.In addition,the DAS system can track the trajectory of downhole tools in the wellbore to guide the operation.Through the velocity analysis of the typical signals,the type of fluids in the wellbore can be distinguished.The successful application of the system provides a promising whole wellbore acoustic monitoring tool for the production of marine gas hydrate,with a good application prospect.
基金Supported by the National Natural Science Foundation ofChina (60537050)
文摘The development of the sensor suitable for measuring large load stress to the anchor cable becomes an important task in bridge construction and maintenance. Therefore, a new type of optical fiber sensor was developed in the laboratory - optical fiber grating sensor for force measurement of anchor cable (OFBFMAC). No similar report about this kind of sensor has been found up to now in China and other countries. This sensor is proved to be an effective way of monitoring in processes of anchor cable installation, cable cutting, cable force regulation, etc, with the accurate and repeatable measuring results. Its successful application in the tie bar cable force safety monitoring for Wuhan Qingchuan bridge is a new exploration of optical fiber grating sensing technology in bridge tie bar monitoring system.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61605033)the Natural Science Foundation of Shandong Province(Grant No.ZR2016FQ24)+1 种基金the Taishan Blue Industry Leadership Program,Project of Shandong Province(Grant No.[2015]1363)the Fundamental Research Funds for the Central Universities(Grant No.HIT.NSRIF.201719).
文摘This paper presents a novel laser⁃induced fluorescence(LIF)Lidar system for marine oil spilling detection.A bifurcated Y⁃type optical fiber and an optical collimating lens compose a coaxial configuration transceiver for this LIF⁃Lidar system.This LIF⁃Lidar system was further applied to measure the excitation spectra from floating oil slicks with different thicknesses on top of seawater at different distances.The system presents several advantages such as compact structure,stable optical path,and convenient operation,which offers a wide application prospect in ocean exploration.
文摘Abstract: A new pyrometer, which can solve the affection of emissivity change in temperature measuring, has been developed by double Y - type optical fibers. The mathematical model of the new pyrometer is presented and the errors of the new pyrometer are analyzed.
文摘Salinity is an important property of industrial and natural waters. It is defined as the measure of the mass of dissolved salts in a given mass of solution. High salinity has an impact on people and industries reliant on water. High levels of salt can reduce crop yields, limit the choice of crops that can be grown and, at higher concentrations over long periods, can kill trees and make the land unsuitable for agricultural purposes. Salinity increases the “hardness” of water, which can mean more soap and detergents have to be used or water softeners installed and maintained. This can also cause scaling in pipes and heaters. The experimental determination of the salt content by drying and weighing presents some difficulties due to the loss of some components. The only reliable way to determine the true or absolute salinity of natural water is to make a complete chemical analysis. However, the method is time consuming and cannot yield the precision necessity for accurate work. Thus to determine salinity, one normally used method involves the measurement of a physical property such as conductivity, density or refractive index. The paper reports the refractometric fiber optic sensor for detection of salinity of water. The mathematical model is developed for detection of the refractive index of liquid and simulated in MATLAB. The fiber optic sensor probe is developed to measure the refractive index of the solution containing different amount of salt dissolved in water i.e. different molar concentrations. Experiments are carried out using the developed probe for these solutions. Experimental results are showing good agreement with the simulated results.
文摘变压器热点温度作为运行经济性、安全性的关键指标,是设备在线监测及状态评估中的重点。该文对变压器内部散热进行研究,着眼于饼式绕组及其油道结构,基于能量流向建立绕组温度变化的物理模型。基于这一模型,在一台内置分布式传感光纤的110kV三相ONAN变压器上开展试验研究,使用分布式光纤测温(distributed temperature sensing,DTS)技术对运行状况下的绕组整体温度分布进行实时监测,分析绕组在ONAN冷却方式下的散热状况。在变压器启动初期,绕组各处散热量较低,温升速率较快。约2 h后,各饼散热量基本与损耗相一致,散热率可达98%以上,因此将这一阶段称为准稳态。准稳态阶段,绕组整体散热率基本一致。负载变化前期不同位置散热量的差异是温度梯度形成的主要原因。基于DTS手段及散热器进出口处油温,提出绕组每饼平均对流换热系数的计算方法,基于无量纲数建立绕组内外表面局部对流换热系数的计算方法,对不同位置、负载率下两种对流换热系数的变化规律进行分析获得了绕组运行过程中对流换热系数分布规律及变化趋势。
文摘We report the design and analysis of a rod-type photonic crystal fiber with Er-Yb co-doped for the high power 1.5-μm band amplifier.The fiber structure is designed to be the 120-μm extreme large core diameter,300-μm inner cladding diameter,and 1.5-mm outer cladding diameter that ensure the single mode output during high power amplification.Both the continuous wave(CW) and pulsed amplification characteristics are analyzed based on the exact modeling and simulation under the designed geometry.The 4-mJ pulse energy and 400-kW peak power are obtained in theory,so the 1.5-μm band amplifier that achieves milojoule level pulse energy meanwhile keeping single mode is firstly designed.