Damage characteristics and seismic capacity of buildings during Nepal M_s 8.1 earthquake

The extensive damage to buildings caused by the Nepal Ms8.1 earthquake has attracted much attention by the international community.Afterthe preliminary scientific investigations on the different affected areas inNepal,the construction and damage characteristics of five different types of buildings commonly existing in Nepal were discussed and the reasons of their disaster performance were analyzed.Types of buildings investigated include reinforced concrete(RC) frame structures,rubble structures,brick-wood structures,raw soil structures,and brick-wood structures of historic buildings.In addition,the weak links of the seismic design were pointed out,which was very important for the post-earthquake reconstruction and recovery,and gave a preliminary explanations for the damage experienced.

Seismic fragility assessment of RC frame structure designed according to modern Chinese code for seismic design of buildings

Following several damaging earthquakes in China, research has been devoted to find the causes of the collapse of reinforced concrete （RC） building sand studying the vulnerability of existing buildings. The Chinese Code for Seismic Design of Buildings （CCSDB） has evolved over time, however, there is still reported earthquake induced damage of newly designed RC buildings. Thus, to investigate modern Chinese seismic design code, three low-, mid- and high-rise RC frames were designed according to the 2010 CCSDB and the corresponding vulnerability curves were derived by computing a probabilistic seismic demand model （PSDM）.The PSDM was computed by carrying out nonlinear time history analysis using thirty ground motions obtained from the Pacific Earthquake Engineering Research Center. Finally, the PSDM was used to generate fragility curves for immediate occupancy, significant damage, and collapse prevention damage levels. Results of the vulnerability assessment indicate that the seismic demands on the three different frames designed according to the 2010 CCSDB meet the seismic requirements and are almost in the same safety level.

Seismic response of tall building considering soil-pile-structure interaction

The seismic behavior of tall buildings can he greatly affected by non-linear soil-pile interaction during strong earthquakes.In this study a 20-storey building is examined as a typical structure supported on a pile foundation for different conditions:(1) rigid base,i.e.no deformation in the foundation:(2) linear soil-pile system;and (3) nonlinear soil-pile system. The effects of pile foundation displacements on the behavior of tall building are investigated,and compared with the behavior of buildings supported on shallow foundation.With a model of non-reflective boundary between the near field and far field, Novak's method of soil-pile interaction is improved.The computation method for vibration of pile foundations and DYNAN computer program are introduced comprehensively.A series of dynamic experiments have been done on full-scale piles, including single pile and group,linear vibration and nonlinear vibration,to verify the validity of boundary zone model.

Introduction to Technical Specification for Seismic Appraisement and Strengthening of Buildings in the Province of Sichuan

On May 5, 2008, China experienced a devastating earthquake, also known as Wenchuan earth-quake. Many buildings, whose seismic design levels were too low to endure a strong earthquake, were severely damaged or even destroyed in the disaster.

Discussion on seismic design of high-rise building structure in China

With the rapid development of China＇s economy, the modernization drive and the process of urbanization continue to advance, land for urban construction is becoming more and tenser and land prices are rising steadily, there are more and more high-rise buildings, its density is also increasing. With the increasing number trend of high-rise building development, anti-seismic building requirement as an important part of architectural design is worthy of our exploration and study. Seismic resistance has become an important subject of engineering design. This paper will discuss the technical principle of seismic design in building structure design, so as to optimize the seismic design of high-rise building structure better.

Estimation of the behavior factor of existing RC-MRF buildings

In recent years, several research groups have studied a new generation of analysis methods for seismic response assessment of existing buildings. Nevertheless, many important developments are still needed in order to define more reliable and effective assessment procedures. Moreover, regarding existing buildings, it should be highlighted that due to the low knowledge level, the linear elastic analysis is the only analysis method allowed. The same codes（such as NTC2008, EC8） consider the linear dynamic analysis with behavior factor as the reference method for the evaluation of seismic demand. This type of analysis is based on a linear-elastic structural model subject to a design spectrum, obtained by reducing the elastic spectrum through a behavior factor. The behavior factor（reduction factor or q factor in some codes） is used to reduce the elastic spectrum ordinate or the forces obtained from a linear analysis in order to take into account the non-linear structural capacities. The behavior factors should be defined based on several parameters that influence the seismic nonlinear capacity, such as mechanical materials characteristics, structural system, irregularity and design procedures. In practical applications, there is still an evident lack of detailed rules and accurate behavior factor values adequate for existing buildings. In this work, some investigations of the seismic capacity of the main existing RC-MRF building types have been carried out. In order to make a correct evaluation of the seismic force demand, actual behavior factor values coherent with force based seismic safety assessment procedure have been proposed and compared with the values reported in the Italian seismic code, NTC08.

Study on the Remote Sensing Assessment of Seismic Intensity of the Yushu Earthquake Based on the Synthetic Seismic Damage Index

This paper provides an overview of the ideas and methods of the assessment of seismic intensity based on remote sensing and describes the models used to assess the remote sensing based synthetic seismic damage index and seismic intensity. With the data of damage information extracted from the high-resolution aerial images in the earthquake-stricken areas( Jiegu town,Yushu city,Qinghai) of the 2010 MS7. 1 Yushu earthquake,and the data obtained through post-earthquake field investigation,the seismic damage degree and seismic intensity have been estimated. The analysis of the results shows that the seismic intensity in Yushu city is estimated as IX through the RS assessment method,which is consistent with the result estimated according to the ground surveys. The results are discussed in the last part of the paper and indicate that the RS techniques are expected to be one of the main methods used to estimate the seismic intensity values in the emergency stage.

Amelioration and retrofitting of educational buildings

Following a seismic event that occurred years ago in Central Italy, the public opinion was growing and growing a concern on the adequacy of educational buildings all across Italy. This activated several political decisions and a consequent technical effort is in progress. Technically speaking one has to manage the classical problem of retrofitting existing buildings. However, the legal environment goes across national codes, targeted guidelines and the professional need of achieving pragmatic solutions based on ethical and social acceptation schemes.This paper introduces the topic in its worldwide exception and focuses then on some operative aspects in the Italian situation. It outlines the consolidated steps along this technical process and emphasizes the weak aspects one meets when going across the designers＇ reports.