An efficient strategy for the preparation of MIL-53(Al)-NH_(2)membranes with high ion selectivity and desalination performance

The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divalent calcium(Ca^(2+))and magnesium(Mg^(2+))ions are at the subnanometer scale in diameter,similar to target monovalent ions,making ion separation a great challenge.Here,we propose a simple and fast secondary growth method for the preparation of MIL-53(Al)-NH_(2)membranes on the surface of anodic aluminum oxide.Such membranes contain angstrom-scale(~7Å)channels for the entrance of small monovalent ions and water molecules,endowing the selectivities for monovalent cations over divalent cations and water over salt molecules.The resulting high-connectivity MIL-53(Al)-NH_(2)membranes exhibit excellent ion separation performance(a selectivity of 121.42 for Na^(+)/Ca^(2+)and 93.81 for Li^(+)/Mg^(2+))and desalination performance(a water/salt selectivity of up to 5196).This work highlights metal–organic framework membranes as potential candidates for realizing ion separation and desalination in liquid treatment.

A collinear tandem time-of-flight mass spectrometer for infrared photodissociation spectroscopy of mass-selected ions

An apparatus based on collinear tandem time-of-flight mass spectrometer has been designed for the measurement of infrared photodissociation spectroscopy of mass-selected ions in the gas phase.The ions from a pulsed laser vaporization supersonic ion source are skimmed and mass separated by a Wiley-McLaren time-of-flight mass spectrometer.The ion of interest is mass selected,decelerated and dissociated by a tunable IR laser.The fragment and parent ions are reaccelerated and mass analyzed by the second time-of-flight mass spectrometer.A simple new assembly integrated with mass gate,deceleration and reacceleration ion optics was designed,which allows us to measure the infrared spectra of mass selected ions with high sensitivity and easy timing synchronization.

Measurement of Ion Mobilities of Selected Amines by Ion Mobility Spectrometry

The ion mobilities of selected amines were measured by IMS. The minimum detection limits and linear ranges of selected amines were detected.

Electrochemical characterization of ion selectivity in electrodeposited nickel hexacyanoferrate thin films

The ion selectivity of electrodeposited nickel hexacyanoferrate （NiHCF） thin films was investigated using electrochemical impedance spectroscopy （EIS） and cyclic voltammetry （CV）. NiHCF thin films were prepared by cathodic deposition on Pt and Al substrates. EIS and CV curves were determined in 1 mol/L （KNO3＋C5NO3） and 1 mol/L （NaNO3＋CsNO3） mixture solutions, which were sensitive to the concentration of Cs^＋ in the electrolytes. Experimental results show that all Nyquist impedance plots show depressed semicircles in the high-frequency range changing over into straight lines at lower frequencies. With increasing amounts of Cs^＋, the redox potentials in CV curves shift toward more positive values and the redox peaks broaden; the semicircle radius in corresponding EIS curves and the charge transfer resistance also increase. EIS combining CV is able to provide valuable insights into the ion selectivity of NiHCF thin films. 2008 University of Science and Technology Beijing. All rights reserved.

Free cupric ions in contaminated agricultural soils around a copper mine in eastern Nanjing City, China

To determine the environmental free metal ion activity was a recent hot issue. A method to measure low-level free cupric ion activity in soil solution extracted with 0.01 mol/L KNO3 was developed by using cupric ion-selective electrode （ISE） and calibrating with Cu-buffer solution. Three copper buffers including iminodiacetic acid （IDA）, ethylenediamine （EN）, and glycine （Gly） were compared for calibrating the Cu-ISE curves in the range of free cupric ions （pCu^2＋） 7-13. The Cu-EN buffer showed the best electrode response and thus was applied as the calibration buffer. The pCu^2＋ of 39 contaminated agricultural soils around a copper mine was measured, ranging from 5.03 to 9.20. Most Cu in the soil solutions was found to be complexed with dissolved soil organic matters, averaging 98.1%. The proportion of free Cu^2＋ ions in the soil solutions decreased with the increasing of solution pH. Soluble Cu and free Cu^2＋ ions concentrations were analyzed by multiple linear regressions to evaluate the effects of soil properties on metal levels and speciation. The results showed that soil solution pH was the most significant factor influencing pCu^2＋ （with R^2 value of 0.76）, while not important for the soluble Cu concentration.

A Method of Determining Selectivity Coefficients Based on the Practical Slope of Ion Selective Electrodes

It is a problem to be solved that the experimental selectivity coefficients of ion selective electrodes (ISEs) depend on the activity. This paper studied the new method of determining selectivity coefficients. A mixed ion response equation, which was similar to Nicolsky-Eisenman (N-E) equation recommended by IUPAC, was proposed. The equation includes the practical response slope of ISEs to the primary ion and the interfering ion. The selectivity coefficient was defined by the equation instead of the N-E equation. The experimental part of the method is similar to that based on the N-E equation. The values of selectivity coefficients obtained with this method do not depend on the activity whether the electrodes exhibit the Nernst response or non-Nernst response. The feasibility of the new method is illustrated experimentally.

Determination of Boron Trifluoride in Boron Trifluoride Complex by Fluoride Ion Selective Electrode

A method was proposed to determine boron trifluoride in boron trifluoride complex using fluoride ion selective electrode(ISE). Hydroxide was chosen to mask aluminum for the determination of 0.01—0.1 mol/L of fluoride. The simulation indicated that the permissible aluminum masked at a certain p H value was limited and hardly related to F-concentration and boric acid. It is better to control p H value below 11.5 and the aluminum concentration within 0.025 mol/L to minimize the interference of hydroxide to the fluoride ISE. The decomposition conditions of boron trifluoride by aluminum chloride were investigated. It is found that the F-detection ratio will approach 1.0 if the Al/F molar ratio is 0.3—0.7 and aluminum concentration is no more than 0.02 mol/L when heated at 80 ℃ for 10 min. In one word, hydroxide is quite fit to mask aluminum for samples which contain high content of fluoride and aluminum and the BF3 content can be successfully determined by this method.

A New Type of Dibenzoyl Tartaric Acid Selective Electrode Based on Polymer Membrane Containing Calixarene Ionophore

A new type of di benzoyl tartaric acid selective electr ode has been developed. Three double\| arm calixarene derivatives were emp loyed as the neutral ionophores. The poly(vinyl chloride) membrane electrode containing an amide derivative of ca lixarene as the neutral carrier an d a dibutyl phthalate as the plastici zer exhibited the highest sensitivity for dibenzoyl tartaric acid. The slop e of linear portion was 27.8 mV per c oncertration decade. The electrode has a fast response and a long lifetime .

Ion and water transport in charge-modified graphene nanopores

Porous graphene has a high mechanical strength and an atomic-layer thickness that makes it a promising material for material separation and biomolecule sensing. Electrostatic interactions between charges in aqueous solutions are a type of strong long-range interaction that may greatly influence fluid transport through nanopores. In this study, molecular dynamic simulations were conducted to investigate ion and water transport through 1.05-nm diameter monolayer graphene nanopores, with their edges charge-modified. Our results indicated that these nanopores are selective to counterions when they are charged. As the charge amount increases, the total ionic currents show an increase-decrease profile while the coion currents monotonically decrease. The co-ion rejection can reach 76.5% and 90.2% when the nanopores are negatively and positively charged, respectively. The Cl-ion current increases and reaches a plateau, and the Na＋current decreases as the charge amount increases in systems in which Na＋ions act as counterions. In addition, charge modification can enhance water transport through nanopores. This is mainly due to the ion selectivity of the nanopores. Notably, positive charges on the pore edges facilitate water transport much more strongly than negative charges.

Reconstructing proton channels via Zr-MOFs realizes highly ion-selective and proton-conductive SPEEK-based hybrid membrane for vanadium flow battery

There is an urgent need to break through the trade-off between proton conductivity and ion selectivity of proton exchange membrane(PEM)in vanadium flow battery(VFB).Proton channels in PEM are the key to controlling the ion sieving and proton conductivity in VFB.Herein,two types of proton channels are reconstructed in the hybrid membrane via introducing modified Zr-MOFs(IM-UIO-66-AS)into SPEEK matrix.Internal proton channels in IM-UIO-66-AS and interfacial proton channels between grafted imidazole groups on Zr-MOFs and SPEEK greatly improve the conductivity of the IM-UIO-66-AS/SPEEK hybrid membrane.More importantly,both reconstructed proton channels block the vanadium-ion permeation to realize enhanced ion selectivity according to the size sieving and Donnan exclusion effects,respectively.Moreover,the hybrid membrane exhibits good mechanical property and dimensional stability.Benefiting from such rational design,a VFB loading with the optimized membrane exhibits enhanced voltage efficiency of 79.9%and outstanding energy efficiency of 79.6%at 200 m A cm^(-2),and keeps a notable cycle stability for 300 cycles in the long-term cycling test.Therefore,this study provides inspiration for preparing next-generation PEMs with high ion selectivity and proton conductivity for VFB application.

Synthetic Channel-forming Peptides and Ion Selectivity

Introduction Peptides made up of alternating L- and D- amino acids can form β-helices as in gramicidin A or cyclic peptides that aggregate to form tubes In both cases the structures are hollow with all the side chains projecting outwards. Kennedy et al. postulated that. peptides having the （LLLD）n configuration could form helices with every fourth side chain projecting inward. It is a fact that synthetic N-formyl- （LeuSerLeuGly） 6- OH, when added to a lipid bilayer, dimerizes, to form ion channels having conductances greater than that of gramicidin.

Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membranewith isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. ThepH-responsive ion recognition of the modified electrode was investigated by use of someneurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.

Effect of Preparation Process of Functional Polymer Active Materials on Properties of Gadolinium Ion Selective Electrode

Recently we have studied the rare earth ion-selective electrodes with active materials of the func-tional polymers and found that the process chosen for the functional polymers had an effect on the propertiesof gadolinium ion selective electrode besides the effects of their structures.1.Effect of preparation process of the grafted polymers on the properties ofgadolinium ion selective electrodesThe electrode membranes which consist of functional polymers as active materials were prepared by re-action of gadolinium chloride with the radiation grafted clmer of acrlic acid and polystyrene of which

DETERMINATION OF SERUM ALBUMIN USING A SILVER ION SELECTIVE ELECTRODE

In this paper is reported a new method of determining serum albumin with potentiometry. The silver ion selective electrode was used as working electrode and S. C. E as reference electrode. By controlling the ionic strength, PH and temperature constant, a good linear relationship was obtained between the cell potential and albumin concentration. This method .possessed characters-of operating simplicity, rapidity and directness. The samples could be detected directly and the results were in accordance with the values detected by classic K method.

EFFECT OF STRUCTURE OF FUNCTIONAL POLYMER ACTIVE MATERIALS ON PROPERTIES OF GADOLINIUM ION SELECTIVE ELECTRODE

In this paper,the functional polymeric active materials were prepared by the grafting copolymerization and their structure and properties were studied.The results show that the structure and properties of these ac- tive materials have the relative large effects on the properties of gadolinium ion selective electrodes.

Determination of Fluoride in Various Samples Using a Fluoride Selective Electrode

Fluoride is widespread in the environment, water, air, vegetation and Earth’s crust which can entre ground and surface water by natural process. Fluoride in minute quantities is essential component for human health and help in normal mineralization of bone and formation of dental enamel. The determination of fluoride in some species was performed by using fluoride ion-selective electrode by direct measurement and standard addition method. The concentration of fluoride ion was determined in drinking water (from different place at Kathmandu), toothpaste, various brand of tea and coffees. The range of fluoride concentration in water sample was 0.16 to 0.39 mg/l, tea and coffee samples were 0.011 to 0.084 mg/l and its value of toothpaste was 0.026 to 0.75 mg/l. The concentration of fluoride ion obtain from different sample was compared with the legitimate value given by the world health organization.

Ion Selective Electrode Determination of Ammonia Nitrogen in Passaic River Waste Water in New Jersey Essex County Area

The percent ammonia nitrogen was determined in Passaic River waste water using Ion-Selective Electrode EPA Method 350.3. The intelligent ammonia sensor integrates ammonia electrode, pH electrode and Ammonia Ion electrode together to realize the in situ detection of ammonia. The test results have shown that the sensor is easy operation, low cost and no pollution. The ammonia is determined potentiometrically using an ammonia ion selective electrode and a pH/mV meter, having an expanded millivolt scale. The ammonia selective electrode uses a hydrophobic gas-permeable membrane to separate the sample solution from an electrode internal solution of ammonium chloride. Dissolved ammonia is converted to NH3 gas by raising the pH to above 11.0 with a strong base. NH3 gas diffuses the membrane and changes the internal solution pH that is sensed by the electrode. In single laboratory test results have been found 1.001 NH3-/L and 0.897 mg NH3-N/L, recoveries were 77.3% and 83.1%, respectively.

The Status of the Isotope Separation by PSP

Experiments, prqiects and patents, concerning practical usage of a separation method, based on ICR （ion cyclotron resonance） in plasma, carried out in the 2000s in USA, EU and in Russia, are discussed in this article. It was planned to use ICR method for production of isotopically enriched burnable poisons for nuclear reactor fuel, and also to use this method for extraction of neutron-excess isotopes for the purpose of observation of neutrinoless double beta decay （ββ0v）. One more application of this method can be a nuclear waste treatment technology. Current situation with realization of these plans is considered.

Composite laminar membranes for electricity generation from water evaporation

Harvesting clean energy from water evaporation has been extensively investigated due to its sustainability.To achieve high efficiency,energy conversion materials should contain multiple features which are difficult to be simultaneously obtained from single-component materials.Here we use composite laminar membranes assembled by nanosheets of graphene oxide and mica,and find a sustained power density induced by water evaporation that is two orders of magnitude larger than that from membranes made by either of the components.The power output is attributed to selective proton transport driven by water evaporation through the interlayer nanochannels in the membranes.This process relies on the synergistic effects from negatively charged and hydrophilic mica surfaces that are important for proton selectivity and water transport,and the tunable electrical conductivity of graphene oxide that provides optimized internal resistance.The demonstrated composite membranes offer a strategy of enhancing power generation by combining the advantages from each of their components.

WTV2.0:A high-coverage plant volatilomics method with a comprehensive selective ion monitoring acquisition mode

Volatilomics is essential for understanding the biological functions and fragrance contributions of plant volatiles.However,the annotation coverage achieved using current untargeted and widely targeted volatomics(WTV)methods has been limited by low sensitivity and/or low acquisition coverage.Here,we introduce WTV 2.0,which enabled the construction of a high-coverage library containing 2111 plant volatiles,and report the development of a comprehensive selective ion monitoring(cSIM)acquisition method,including the selection of characteristic qualitative ions with the minimal ion number for each compound and an optimized segmentation method,that can acquire the smallest but sufficient number of ions for most plant volatiles,as well as the automatic qualitative and semi-quantitative analysis of cSIM data.Importantly,the library and acquisition method we developed can be self-expanded by incorporating compounds not present in the library,utilizing the obtained cSIM data.We showed that WTV 2.0 increases the median signal-to-noise ratio by 7.6-fold compared with the untargeted method,doubled the annotation coverage compared with the untargeted and WTV 1.0 methods in tomato fruit,and led to the discovery of menthofuran as a novel flavor compound in passion fruit.WTV 2.0 is a Python library with a user-friendly interface and is applicable to profiling of volatiles and primary metabolites in any species.