Unlocking the potential of ultra-thin two-dimensional antimony materials:Selective growth and carbon coating for efficient potassium-ion storage

Antimony-based anodes have attracted wide attention in potassium-ion batteries due to their high theoretical specific capacities(∼660 mA h g^(-1))and suitable voltage platforms.However,severe capacity fading caused by huge volume change and limited ion transportation hinders their practical applications.Recently,strategies for controlling the morphologies of Sb-based materials to improve the electrochemical performances have been proposed.Among these,the two-dimensional Sb(2D-Sb)materials present excellent properties due to shorted ion immigration paths and enhanced ion diffusion.Nevertheless,the synthetic methods are usually tedious,and even the mechanism of these strategies remains elusive,especially how to obtain large-scale 2D-Sb materials.Herein,a novel strategy to synthesize 2D-Sb material using a straightforward solvothermal method without the requirement of a complex nanostructure design is provided.This method leverages the selective adsorption of aldehyde groups in furfural to induce crystal growth,while concurrently reducing and coating a nitrogen-doped carbon layer.Compared to the reported methods,it is simpler,more efficient,and conducive to the production of composite nanosheets with uniform thickness(3–4 nm).The 2D-Sb@NC nanosheet anode delivers an extremely high capacity of 504.5 mA h g^(-1) at current densities of 100 mA g^(-1) and remains stable for more than 200 cycles.Through characterizations and molecular dynamic simulations,how potassium storage kinetics between 2D Sb-based materials and bulk Sb-based materials are explored,and detailed explanations are provided.These findings offer novel insights into the development of durable 2D alloy-based anodes for next-generation potassium-ion batteries.

Selective Area Growth and Characterization of GaN Nanorods Fabricated by Adjusting the Hydrogen Flow Rate and Growth Temperature with Metal Organic Chemical Vapor Deposition

CaN nanorods are successfully fabricated by adjusting the flow rate ratio of hydrogen （H2）/nitrogen （N2） and growth temperature of the selective area growth （SAG） method with metal organic chemical vapor deposition （MOCVD）. The SAG template is obtained by nanospherical-lens photolithography. It is found that increasing the flow rate of 1-12 will change the CaN crystal shape from pyramid to vertical rod, while increasing the growth temperature will reduce the diameters of GaN rods to nanometer scale. Finally the CaN nanorods with smooth lateral surface and relatively good quality are obtained under the condition that the H2：N2 ratio is 1：1 and the growth temperature is 1030℃. The good crystal quality and orientation of GaN nanorods are confirmed by high resolution transmission electron microscopy. The cathodoluminescence spectrum suggests that the crystal and optical quality is also improved with increasing the temperature.

Fabrication of 32 Gb/s Electroabsorption Modulated Distributed Feedback Lasers by Selective Area Growth Technology

A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.

Selective Area Growth of GaAs in V-Grooved Trenches on Si(001) Substrates by Aspect-Ratio Trapping

A high quality of GaAs crystal growth in nanoscale V-shape trenches on Si（O01） substrates is achieved by using the aspect-ratio trapping method. GaAs thin films are deposited via metal-organic chemical vapor deposition by using a two-step growth process. Threading disJocations arising from lattice mismatch are trapped by laterally confining sidewalls, and antiphase domains boundaries are completely restricted by V-groove trenches with Si { 111} facets. Material quality is confirmed by scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and high resolution X-ray diffraction. Low temperature photoluminescence （PL） measurement is used to analyze the thermal strain relaxation in GaAs layers. This approach shows great promise for the realization of high mobility devices or optoelectronie integrated circuits on Si substrates.

Highly selective growth of(6,5)single-walled carbon nanotubes from sigma phase alloy catalyst

The chirality structure of a single-walled carbon nanotube(SWNT)strongly depends on the composition of catalyst used in the chemical vapor deposition process.In this study,we develop a porous magnesia supported manganese-rhenium(MnRe/MgO)catalyst for chirality-selective synthesis of SWNTs.Detailed characterizations reveal that(6,5)tubes with a selectivity higher than 70%are grown from the Re-rich MnRe/MgO catalyst.By comparing the SWNT growth results with those of monometallic Mn or Re,the formation of sigma phase,an intermetallic compound occurring in transition-metal alloy systems,is revealed to be crucial for the dominant synthesis of(6,5)SWNTs.This work not only extends the application of sigma phase alloy for catalytic synthesis of SWNTs,but also sheds lights on the growth of SWNTs with a high chirality selectivity.

Hydrothermal Synthesis and Field Enhancement Behavior of ZnO Nanorods Pattern

We provide a new way to prepare ZnO nanorods pattern from the solution composed of hexamethylenetetramine （HMT） and Zn（NO3）2. The substrate is ITO substrate covered by well ordered Au islands. Since Au and the underneath ITO substrate have two different nucleation rates in the initial stage of heterogeneous nucleation process, the subsequent ZnO growth on the quick nucleating area takes place under diffusion control and is able to confine the synthesis of ZnO nanorods to specific locations. The concentrations of zinc nitrate and HMT are well adjusted to show the possibility of the new route for the patterning of the ZnO nanorods. Furthermore, the nanorods pattern was characterized by X-ray diffraction and photoluminescence and the performance of field emission property from ZnO nanorod patterns was investigated. The ZnO nanorods pattern with a good alignment also shows a good field enhancement behavior with a high value of the field enhancement factor.

A Wavelength Tunable DBR Laser Integrated with an Electro-Absorption Modulator by a Combined Method of SAG and QWI

We report a wavelength tunable electro-absorption modulated DBR laser based on a combined method of SAG and QWI. The threshold current is 37mA and the output power at 100mA gain current is 3.5mW. When coupled to a single-mode fiber with a coupling efficiency of 15% ,more than a 20dB extinction ratio is observed over the change of EAM bias from 0 to -2V. The 4.4nm continuous wavelength tuning range covers 6 channels on a 100GHz grid for WDM telecommunications.

An Electroabsorption Modulator Monolithically Integrated with a Semiconductor Optical Amplifier and a Dual-Waveguide Spot-Size Converter

A semiconductor optical amplifier and electroabsorption modulator monolithically integrated with a spotsize converter input and output is fabricated by means of selective area growth,quantum well intermixing,and asymmetric twin waveguide technology. A 1550-1600nm lossless operation with a high DC extinction ratio of 25dB and more than 10GHz 3dB bandwidth are successfully achieved. The output beam divergence angles of the device in the horizontal and vertical directions are as small as 7.3°× 18.0°, respectively, resulting in a 3.0dB coupling loss with a cleaved single-mode optical fiber.

1.5μm Self-Aligned Spotsize Converter Integrated DFB Fabricated by Selective Area Grown MOVPE

High performance 1 57μm spotsize converter monolithically integrated DFB is fabricated by the technique of self aligned selective area growth.The upper optical confinement layer and the butt coupled tapered thickness waveguide are regrown simultaneously,which not only offeres the separated optimization of the active region and the integrated spotsize converter,but also reduces the difficulty of the butt joint selective regrowth.The threshold current is as low as 4 4mA.The output power at 49mA is 10 1mW.The side mode suppression ratio (SMSR) is 33 2dB.The vertical and horizontal far field divergence angles are as small as 9° and 15° respectively,the 1dB misalignment tolerance are 3 6μm and 3 4μm.

Migration characterization of Ga and In adatoms on dielectric surface in selective MOVPE

Migration characterizations of Ga and In adatoms on the dielectric surface in selective metal organic vapor phase epitaxy （MOVPE） were investigated. In the typical MOVPE environment, the selectivity of growth is preserved for GaN, and the growth rate of GaN micro-pyramids is sensitive to the period of the patterned SiO2 mask. A surface migration induced model was adopted to figure out the effective migration length of Ga adatoms on the dielectric surface. Different from the growth of GaN, the selective area growth of InGaN on the patterned template would induce the deposition of InGaN polycrystalline particles on the patterned Si02 mask with a long period. It was demonstrated with a scanning electron microscope and energy dispersive spectroscopy that the In adatoms exhibit a shorter migration length on the dielectric surface.

High crystalline quality of SiGe fin fabrication with Si-rich composition area using replacement fin processing

A high crystalline quality of SiGe fin with an Si-rich composition area using the replacement fin processing is systematically demonstrated in this paper.The fin replacement process based on a standard FinFET process is developed.A width of less than 20-nm SiGe fin without obvious defect impact both in the direction across the fin and in the direction along the fin is verified by using the high angle annular dark field scanning transmission electron microscopy and the scanning moiréfringe imaging technique.Moreover,the SiGe composition is inhomogenous in the width of the fin.This is induced by the formation of 111 facets.Due to the atomic density of the 111 facets being higher,the epitaxial growth in the direction perpendicular to these facets is slower than in the direction perpendicular to 001.The Ge incorporation is then higher on the 111 facets than on the 001 facets.So,an Si-rich area is observed in the central area and on the bottom of SiGe fin.

Influence of adatom migration on wrinkling morphologies of AlGaN/GaN micro-pyramids grown by selective MOVPE

Ga N micro-pyramids with AlGaN capping layer are grown by selective metal–organic–vapor phase epitaxy（MOVPE）. Compared with bare Ga N micro-pyramids, AlGaN/Ga N micro-pyramids show wrinkling morphologies at the bottom of the structure. The formation of those special morphologies is associated with the spontaneously formed AlGaN polycrystalline particles on the dielectric mask, owing to the much higher bond energy of Al–N than that of Ga–N. When the sizes of the polycrystalline particles are larger than 50 nm, the uniform source supply behavior is disturbed, thereby leading to unsymmetrical surface morphology. Analysis reveals that the scale of surface wrinkling is related to the migration length of Ga adatoms along the AlGaN {1ī01} facet. The migration properties of Al and Ga further affect the distribution of Al composition along the sidewalls, characterized by the μ-PL measurement.

The Proteome Landscape of Human Placentas for Monochorionic Twins with Selective Intrauterine Growth Restriction

In perinatal medicine,intrauterine growth restriction(IUGR)is one of the greatest challenges.The etiology of IUGR is multifactorial,but most cases are thought to arise from placental insufficiency.However,identifying the placental cause of IUGR can be difficult due to numerous confounding factors.Selective IUGR(sIUGR)would be a good model to investigate how impaired placentation affects fetal development,as the growth discordance between monochorionic twins cannot be explained by confounding genetic or maternal factors.Herein,we constructed and analyzed the placental proteomic profiles of IUGR twins and normal cotwins.Specifically,we identified a total of 5481 proteins,of which 233 were differentially expressed(57 up-regulated and 176 down-regulated)in IUGR twins.Bioinformatics analysis indicates that these differentially expressed proteins(DEPs)are mainly associated with cardiovascular system development and function,organismal survival,and organismal development.Notably,34 DEPs are significantly enriched in angiogenesis,and diminished placental angiogenesis in IUGR twins has been further elaborately confirmed.Moreover,we found decreased expression of metadherin(MTDH)in the placentas of IUGR twins and demonstrated that MTDH contributes to placental angiogenesis and fetal growth in vitro.Collectively,our findings reveal the comprehensive proteomic signatures of placentas for sIUGR twins,and the DEPs identified may provide in-depth insights into the pathogenesis of placental dysfunction and subsequent impaired fetal growth.

Selective growth of wide band gap atomically thin Sb2O3 inorganic molecular crystal on WS2

Heterostructures combined by different individual two-dimensional(2D)materials are essential building blocks to realize unique electronic,optoelectronic properties and multifunctional applications.To date,the direct growth of 2D/2D atomic van der Waals heterostructures(vdWHs)have been extensively investigated.However,the heterostructures from 2D inorganic molecular crystals and atomic crystals have been rarely reported.Here we report two-step direct epitaxial growth of the inorganic molecular-atomic Sb2O3/WS2 vdWHs.The thickness of Sb2O3 nanosheets on WS2 nanosheets can be tuned by variable growth temperatures.Oriented growth behavior of Sb2O3 on WS2 was determined through statistics.Optical images,Raman spectra,Raman mappings and selected-area electron diffraction(SAED),etc.,reveal that Sb2O3/WS2 heterostructures are vertically stacked with high crystal quality.Electrical transport measurements demonstrate that the heterotransistors based on the heterostructures possess high current on/off ratio of 5 × 10^5,obvious gate-tunable and current rectification output characteristics.Optoelectronic characterizations show that the heterostructures have a clear photoresponse with high responsivity of 16.4 AW.The growth of vdWHs from 2D inorganic molecular-atomic crystals may open up new opportunities in 2D functional electronics and optoelectronics.

Selective Fetal Growth Restriction in Monochorionic Diamniotic Twins: Diagnosis and Management

Selective fetal growth restriction (sFGR) is a severe condition that complicates 10% to 15% of all monochorionic diamniotic (MCDA) twin pregnancies. Pregnancies complicated with sFGR are at high risk of intrauterine demise or adverse perinatal outcome for the twins. Three clinical types have been described according to the umbilical artery (UA) Doppler pattern observed in the smaller twin: type I, when the UA Doppler is normal;type II, when there is persistent absent or reversed end-diastolic blood flow in the UA Doppler;and type III, when there is intermittent absent and/or reversed end-diastolic blood flow in the UA Doppler. Clinical evolution and management options mainly depend on the type of sFGR. Type I is usually associated with a good prognosis and is managed conservatively. There is no consensus on the management of types II and III, but in earlier and more severe presentations, fetal interventions such as selective laser photocoagulation of placental anastomoses or selective fetal cord occlusion of the smaller twin may be considered. This review aims to provide updated information about the diagnosis, evaluation, follow-up, and management of sFGR in MCDA twin pregnancies.

Selective Growth of ZnO Nanorods on SiO2/Si Substrates Using a Graphene Buffer Layer

A promising strategy for the selective growth of ZnO nanorods on SiO2/Si substrates using a graphene buffer layer in a low temperature solution process is described. High densities of ZnO nanorods were grown over a large area and most ZnO nanorods were vertically well-aligned on graphene. Furthermore, selective growth of ZnO nanorods on graphene was realized by applying a simple mechanical treatment, since ZnO nanorods formed on graphene are mechanically stable on an atomic level. These results were confirmed by first principles calculations which showed that the ZnO-graphene binding has a low destabilization energy. In addition, it was found that ZnO nanorods grown on SiO2/Si with a graphene buffer layer have better optical properties than ZnO nanorods grown on bare SiO2/Si. The nanostructured ZnO-graphene materials have promising applications in future flexible electronic and optical devices.

Selective Growth of GaN on Slope Cone-shaped Patterned Sapphire Substrate

Cone-shaped patterned sapphire substrate was prepared by inductively coupled plasma etching and GaN nucleation layer was grown on it by metal-organic chemical vapor deposition.A selective growth of GaN nucleation layer was found on the slope of the cone-shaped patterned sapphire substrat,and the distribution morphology of GaN had significantly changed after it was recrystallized.GaN selective growth and redistribution were analyzed by investigating the distribution of crystallographic planes on the cone surface and the atom array of specific planes at atom level.

Selected area growth integrated wavelength converter based on PD-EAM optical logic gate

A selected area growth wavelength converter based on a PD-EAM optical logic gate for WDM application is presented, integrating an EML transmitter and a SOA-PD receiver. The design, fabrication, and DC characters were analyzed. A 2 Gb/s NRZ signal based on the C-band wavelength converted to 1555 nm with the highest extinction ratio of 7 dB was achieved and wavelength converted eye diagrams with eyes opened were presented.

4 × 25 GHz uni-traveling carrier photodiode arrays monolithic with In P-based AWG demultiplexers using the selective area growth technique

InP-based photonics integration is becoming a competi- tive candidate for realizing optical modules with enhanced functionality at a reduced cost, especially in optical com- munication systems, since the proposal of wavelength division multiplexing （WDM）. In recent years, network traffic has raised demands for high capacity, high speed transmission systems.

Selectivity of Crystal Growth Direction in Layered Double Hydroxides

Investigation of selectivity of crystal growth direction in layered double hydroxides is helpful to control their particle sizes in different directions. Mg-AI layered double hydroxides (LDHs) were synthesized using a coprecipitation method. The influences of aging temperature, aging time, and Mg/AI molar ratio on the crystal structure, the LDHs particle size, and the selectivity of crystal growth in different directions were investigated. The results show that the size of the crystallites in the a direction is larger than that in the c direction for all experimental conditions, indicating faster crystal growth in the a direction than in the c direction. The crystallite sizes in the a and c directions both increase with decreasing Mg/AI molar ratio but with less difference between the sizes in the two directions. Therefore, the crystal growth rate in the c direction increases more than that in the a direction as the Mg/AI molar ratio decreases. The influence of the aging time, aging temperature, and Mg/AI molar ratio on the selectivity of the crystal growth direction can be used to prepare LDHs with selected sizes in the a and c directions.