Activated red mud(RM)has been proved to be a promising base material for the selective catalysis reduction(SCR)of NOx.The inherent low reducibility and acidity limited its low-temperature activity.In this work,molybde...Activated red mud(RM)has been proved to be a promising base material for the selective catalysis reduction(SCR)of NOx.The inherent low reducibility and acidity limited its low-temperature activity.In this work,molybdenum oxide,tungsten oxide,and cerium oxide were used to reconfigure the redox sites and acid sites of red mud based catalyst.When activated red mud was reconfigured by cerium-tungsten oxide(Ce-W@RM),the NOx conversion kept above 90%at 219-480℃.The existence of Ce^(3+)/Ce^(4+) redox electron pairs provided more surface adsorbed oxygen(O_(α)) and served as a redox cycle.Positive interactions between Ce,W species and Fe oxide in red mud occurred,which led to the formation of unsaturated chemical bond and promoted the activation of adsorbed NH_(3) species.WO_(3) and Ce_(2)(WO_(4))_(3)(formed by solid-state reaction between Ce and W species)could provide more Brønsted acid sites(W-O modes of WO_(3),W=O or W-O-W modes of Ce_(2)(WO_(4))_(3)).CeO_(2) species could provide more Lewis acid sites.The Langmuir-Hinshelwood(L-H)routes and Eley-Rideal(E-R)routes occurred in the low-temperature SCR reaction on the Ce-W@RM surface.NH_(4)^(+) species on Brønsted acid sites,NH_(3) species on Lewis acid sites,bidentate nitrate and bridging nitrate species were key active intermediates species.展开更多
This work aims to study the improvement effect of Sm on Mn-based catalysts for selective catalytic reduction (SCR) of NO with NH3.A series of Sm_(x)Mn_(0.3-x)-xTi catalysts (x=0,0.1,0.15,0.2,and 0.3) were prepared by ...This work aims to study the improvement effect of Sm on Mn-based catalysts for selective catalytic reduction (SCR) of NO with NH3.A series of Sm_(x)Mn_(0.3-x)-xTi catalysts (x=0,0.1,0.15,0.2,and 0.3) were prepared by co-precipitation.Activity tests indicated that the Sm_(0.15)Mn_(0.15)Ti catalyst showed superior performances,with a NO conversion of 100%and N_(2)selectivity above 87%at 180–300℃.The characterizations showed that Sm doping suppressed the crystallization of TiO_(2)and Mn2O3phases and increased the specific surface area and acidity.In particular,the surface area increased from 152.2 m^(2)·g^(-1)for Mn0.3Ti to 241.7 m^(2)·g^(-1)for Sm_(0.15)Mn_(0.15)Ti.These effects contributed to the high catalytic activity.The X-ray photoelectron spectroscopy (XPS) results indicated that the relative atomic ratios of Sm^(3+)/Sm and Oβ/O of Sm_(0.15)Mn_(0.15)Ti were 76.77at%and 44.11at%,respectively.The presence of Sm contributed to an increase in surface-absorbed oxygen (Oβ) and a decrease in Mn^(4+)surface concentration,which improved the catalytic activity.In the results of hydrogen temperature-programmed reduction(H_(2)-TPR),the presence of Sm induced a higher reduction temperature and lower H_(2)consumption (0.3 mmol·g^(-1)) for the Sm_(0.15)Mn_(0.15)Ti catalyst compared to the Mn0.3Ti catalyst.The decrease in Mn^(4+)weakened the redox property of the catalysts and increased the N_(2)selectivity by suppressing N_(2)O formation from NH3oxidation and the nonselective catalytic reduction reaction.The in situ diffuse reflectance infrared Fourier transform spectra (DRIFTs) revealed that NH3-SCR of NO over the Sm_(0.15)Mn_(0.15)Ti catalyst mainly followed the Eley–Rideal mechanism.Sm doping increased surface-absorbed oxygen and weakened the redox property to improve the NO conversion and N_(2)selectivity of the Sm_(0.15)Mn_(0.15)Ti catalyst.展开更多
NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperat...NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperatures are essential to denitration. In this work, a series of bimetallic CeCu-SAPO-34 molecular sieves were synthesized by one-step hydrothermal method. The Ce Cu-SAPO-34 maintained good crystallinity and a regular hexahedron appearance of Cu-SAPO-34 after introducing Ce species, while exhibiting a higher specific surface area and pore volume. The as-prepared CeCu-SAPO-34 with 0.02%(mass) Ce constituent exhibited the best catalytic activity below 300℃ and a maximum NO_(x) conversion of 99% was attained;the NO_(x) removal rates of more than 68% and 94% were achieved at 150℃ and 200℃, respectively. And the introduction of cerium species in Cu-SAPO-34 improves the low-temperature hydrothermal stability of the catalyst towards NH_(3)-SCR reaction. Additionally, the introduced Ce species could enhance the formation of abundant weak Br?nsted acid centers and promote the synergistic effect between CuO grains and isolated Cu^(2+) to enhance the redox cycle, which benefit the NH_(3)-SCR reaction.This work provides a facile synthesis method of high-efficiency SCR denitration catalysts towards diesel vehicles exhaust treatment under low temperature.展开更多
Binary metal oxide(MnOx-A/TiO2)catalysts were prepared by adding the second metal to manganese oxides supported on titanium dioxide(TiO2),where,A indicates Fe2O3,WO3,MoO3,and Cr2O3.Their catalytic activity,N2 sele...Binary metal oxide(MnOx-A/TiO2)catalysts were prepared by adding the second metal to manganese oxides supported on titanium dioxide(TiO2),where,A indicates Fe2O3,WO3,MoO3,and Cr2O3.Their catalytic activity,N2 selectivity,and SO2 poisonous tolerance were investigated.The catalytic performance at low temperatures decreased in the following order:Mn-W/TiO2〉Mn-Fe/TiO2〉Mn-Cr/TiO2〉Mn-Mo/TiO2,whereas the N2 selectivity decreased in the order:Mn-Fe/TiO2〉Mn-W/TiO2〉Mn-Mo/TiO2〉Mn-Cr/TiO2.In the presence of 0.01%SO2 and 6%H2O,the NOx conversions in the presence of Mn-W/TiO2,Mn-Fe/TiO2,or Mn-Mo/TiO2 maintain 98.5%,95.8%and 94.2%, respectively,after 8 h at 120°C at GHSV 12600 h? 1 .As effective promoters,WO3 and Fe2O3 can increase N2 selectivity and the resistance to SO2 of MnOx/TiO2 significantly.The Fourier transform infrared(FTIR)spectra of NH3 over WO3 show the presence of Lewis acid sites.The results suggest that WO3 is the best promoter of MnOx/TiO2,and Mn-W/TiO2 is one of the most active catalysts for the low temperature selective catalytic reduction of NO with NH3.展开更多
The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the pre...The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results showed that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3 at 350-450℃, respectively. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.展开更多
Catalytic properties of MnOx-FeOx complex oxide (hereafter denoted as Mn-Fe) catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, su...Catalytic properties of MnOx-FeOx complex oxide (hereafter denoted as Mn-Fe) catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, such as N2 physisorption, X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), in situ Fourier transform infrared spectroscopy (in situ FT-IR) and temperature-programmed reduction (TPR) and their catalytic activities were evaluated with the selective catalytic reduction (SCR) of NOx by NH3. It was found that with the addition of Cr, more NO could be removed in the low-temperature window (below 120 ℃). Among the tested catalysts, Mn-Fe- Cr (2 : 2 : 1) catalyst exhibited the best catalytic performance at 80 ℃ with the NO conversion higher than 90%. The combination of the reaction and characterization results indicated that (1) the strong interaction among tertiary metal oxides existed in the catalysts when Cr was appropriately added, which made the active components better dispersed with less agglomeration and sintering and the largest BET specific surface area could be obtained; (2) Cr improved the low-temperature reducibility of the catalyst and promoted the formation of the active intermediate (-NH3+), which favored the low-temperature SCR reaction.展开更多
Monolithic catalysts of Pt/La-Al2O3 and Pt/Ce0.67Zr0.3302 were prepared to investigate methane selective catalytic reduction (SCR) of NO. The results indicate that Pt/Ce0.67Zr0.33O2 shows high activity and both NO a...Monolithic catalysts of Pt/La-Al2O3 and Pt/Ce0.67Zr0.3302 were prepared to investigate methane selective catalytic reduction (SCR) of NO. The results indicate that Pt/Ce0.67Zr0.33O2 shows high activity and both NO and CH4 can be converted completely at 450℃. Meanwhile, NO and CH4 can be converted completely when there exists excess oxygen. The Pt/Ce0.67Zr0.33O2 catalyst were further investigated by using methane as reducing agent to SCR NO in a novel equipment which combined the CH4 selective catalytic reduction of NO with methane combustion. The result shows that the catalyst is high active and the novel equipment is very effective. The conversion of NO is above 92% under the conditions used in this work. The prepared burner and catalysts have great potential for application.展开更多
The performance of Mn-W/TiO2 for selective catalytic reduction(SCR) of NOx with NH3 and its resistance to different concentrations of SO2 at various temperatures were investigated. The results show that WO3 increase...The performance of Mn-W/TiO2 for selective catalytic reduction(SCR) of NOx with NH3 and its resistance to different concentrations of SO2 at various temperatures were investigated. The results show that WO3 increased the active sites and enhanced the strength of acid, so it was an effective promoter of MnOJTiO2. The NOx conversion on Mn-W/TiO2 ranges from 80.3% to 99.6% between 100 ℃to 350℃ at GHSV=18900 h 1, while N2 product selectivity changes from 100% to 98.7%. In the presence of 0.01% SO2 and 6% H20, NOx conversion maintained 98.5% at 120℃. The influence of more than 0.01% SO2 on the activity of MnOx-WO3/TiO2 will disappear if the temperature rises above 250℃. By means of heating and sweeping with He, the activity of the catalysts can be recovered. At 300℃, NOx conversion yielded 99% with 0.07% SO2 and reached the level of commercial V-W/TiO2 catalysts. The Mn-W/TiO2 catalyst showed excellent performance for SCR of NOx with NH3 in a wider range of temperature with strong tolerance to SO2.展开更多
In this work,the characterizations of Cu-SSZ-13 after hydrothermal aging(HTA)and thermal aging(TA)at different temperatures(750,800,and 850°C)are compared,and the differences between those two serious aged sample...In this work,the characterizations of Cu-SSZ-13 after hydrothermal aging(HTA)and thermal aging(TA)at different temperatures(750,800,and 850°C)are compared,and the differences between those two serious aged samples are analyzed.With this data,the effect of steam on catalysts deactivation during hydrothermal aging is analyzed.The TA at 750 and 800°C causes the dealumination and the agglomeration of Cu^(2+)ions to Cu O,resulting in the activity loss of Cu-SSZ-13.The presence of steam upon HTA at750 and 800°C aggravates the catalyst deactivation by increasing the Al detachment and the Cu^(2+)agglomeration.The structure and cupric state are almost the same in the Cu-SSZ-13 after TA and HTA at 850°C,respectively,indicating that the steam has little influence on the deactivation.The formation of CuAl_(2)O_(4) spinel is the primary reason for the deactivation after both HTA and TA at 850°C,probably attributed to the strong interaction between Cu^(2+)ions and framework Al sites at high temperatures.展开更多
The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction(SCR) of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and...The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction(SCR) of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and a N2 product selectivity of 100%—98.7% during 100 °C to 350 °C at gas hourly space velocity(GHSV)=18900 h-1.In the presence of 0.01% SO2 and 6% H2O at 120 °C,the NOx conversion can maintain 98.5%.At 300 °C and with 0.07% SO2 in reactant stream,the NOx conversion stabilized at 99% as high as the commercial V-W/TiO2 catalyst's level.The steady-state kinetics study shows that O2 played a promoting role.In the presence of less than 1.5% O2,NOx conversion can increase sharply with the increase of O2 concentration.The reaction order was zero with respect to NH3 and first with respect to NO with excess O2 and H2O.The kinetics active energy(Ea) of Mn-W/TiO2 was calculated to be 6.24 kJ/mol according to the kinetic experiment at various temperatures,much lower than those of other catalysts reported in the literature.Mn-W/TiO2 is an excellent catalyst for SCR of NO with NH3 by now.展开更多
To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstru...To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.展开更多
Catalytic performance of W/HZSM-5 in selective catalytic reduction of NO by acetylene was investigated in a reaction system with 1600 ppm of NO, 800 ppm of C2H2, and 9.95% of O2 in He. It was found that promotional ef...Catalytic performance of W/HZSM-5 in selective catalytic reduction of NO by acetylene was investigated in a reaction system with 1600 ppm of NO, 800 ppm of C2H2, and 9.95% of O2 in He. It was found that promotional effect of tungsten on the reaction is strongly affected by catalyst preparation conditions and Si/Al ratio of the parent zeolite. A better dispersion of tungsten on HZSM-5 and relatively more monomeric tungsten species were found on 8%W/HZSM-5 prepared by impregnation of the zeolite with lower SiO2/A1203 ratio (25) in ammonic ammonium tungstate solution and calcination of the resulting material at higher temperature (550 ℃). The highest NO conversion to N2 of 86.3% in the reaction system was obtained at 350 ℃ over the catalyst thus prepared. The mechanism of monomeric tungsten species improving the C2H2-SCR can be attributed to accelerating the formation of active nitrate species.展开更多
Waste selective catalytic reduction(SCR)catalyst as a hazardous waste has a significant impact on the environment and human health.In present study,a novel technology for thermal treatment of waste SCR catalyst was pr...Waste selective catalytic reduction(SCR)catalyst as a hazardous waste has a significant impact on the environment and human health.In present study,a novel technology for thermal treatment of waste SCR catalyst was proposed by adding it to sinter mix for iron ore sintering.The influences of coke rate on the flame front propagation,sinter microstructure,and sinter quality during sintering co-processing the waste SCR catalyst process were studied.In situ tests results indicated the maximum sintering bed temperature increased at higher coke rate,indicating more liquid phase generated and higher airflow resistance.The sintering time was longer and the calculated flame front speed dropped at higher coke rate.Sinter microstructure results found the coalescence and reshaping of bubbles were more fully with increasing coke rate.The porosity dropped from 35.28%to 25.66%,the pore average diameter of large pores decreased from 383.76μm to 311.43μm.With increasing coke rate,the sinter indexes of tumbler index,productivity,and yield,increased from 33.2%,9.2 t·m^(-2)·d^(-1),28.9%to 58.0%,36.0 t·m^(-2)·d^(-1),68.9%,respectively.Finally,a comprehensive index was introduced to systematically assess the influence of coke rate on sinter quality,which rose from 100 to 200 when coke rate was increased from 3.5%(mass)to 5.5%(mass).展开更多
The presented work reports the selective catalytic reduction(SCR)of NO_(x) assisted by dielectric barrier discharge plasma via simulating marine diesel engine exhaust,and the experimental results demonstrate that the ...The presented work reports the selective catalytic reduction(SCR)of NO_(x) assisted by dielectric barrier discharge plasma via simulating marine diesel engine exhaust,and the experimental results demonstrate that the low-temperature activity of NH_(3)-SCR assisted by non-thermal plasma is enhanced significantly,particularly in the presence of a C_(3)H_(6) additive.Simultaneously,CeMnZrO_(x)@TiO_(2) exhibits strong tolerance to SO_(2) poisoning and superior catalytic stability.It is worthwhile to explore a new approach to remove NO_(x) from marine diesel engine exhaust,which is of vital significance for both academic research and practical applications.展开更多
The influences of steam and sulfide on the efficiency of NOx reduction using ammonia(NH_(3))over the nanometer-class V-W/Ti catalyst in conditions of high temperature is experimentally investigated using a steady-flow...The influences of steam and sulfide on the efficiency of NOx reduction using ammonia(NH_(3))over the nanometer-class V-W/Ti catalyst in conditions of high temperature is experimentally investigated using a steady-flow reactor.The results showed that selective catalytic reduction(SCR)is inhibited by H_(2)O at low temperature,but higher NO conversion efficiency is achieved at high temperature since the reaction of NH_(3) oxidized by O_(2) to NOx is inhibited by H_(2)O.The activity of SCR is promoted by SO_(2) in the temperature range of 200~500℃,the NO conversion efficiency was improved to 98%from 94%by adding SO_(2).SCR would be improved at 350~500℃ when H_(2)O and SO_(2) exist at the same time.Furthermore,the positive influence to the NOx conversion was proved in the presence of H_(2)O and SO_(2) as a result of the European Stationary Cycle test.展开更多
Various Er modified MnO_(x) catalysts were synthesized using co-precipitation approach and tested in the selective catalytic reduction of NO_(x) by ammonia(NH_(3)-SCR).Catalysts were analyzed with various characteriza...Various Er modified MnO_(x) catalysts were synthesized using co-precipitation approach and tested in the selective catalytic reduction of NO_(x) by ammonia(NH_(3)-SCR).Catalysts were analyzed with various characterization techniques,and it is found that the doping of Er can enormously enhance the catalytic performance of MnO_(x)catalyst.MnEr_(0.1)demonstrates advantageous catalytic performance in the NH_(3)-SCR reaction owing to rich surface acidic sites,high surface content of Mn^(4+),superior redox capacity,and enhanced surface-adsorbed oxygen.From diffuse reflectance infrared Fourier transform spectroscopy(DRIFTs)analysis,it is suggested that the MnEr0.1catalyst follows mainly Eley-Rideal mechanism while MnO_(x) is dominated by Langmuir-Hinshelwood mechanism.展开更多
Three kinds of Ce-based catalysts(CePO_(4),CeVO_(4),Ce_(2)(SO_(4))_(3))were synthesized and used for the selective catalytic reduction(SCR)of NO by NH_(3).NH_(3)-SCR performances were conducted in the temperature rang...Three kinds of Ce-based catalysts(CePO_(4),CeVO_(4),Ce_(2)(SO_(4))_(3))were synthesized and used for the selective catalytic reduction(SCR)of NO by NH_(3).NH_(3)-SCR performances were conducted in the temperature range of 80 to 400°C.The catalytic efficiencies of the three catalysts are as follow:CePO_(4)>CeVO_(4)>Ce_(2)(SO_(4))_(3),which is in agreement with their abilities of NH_(3)adsorption capacities.The highest NO conversion rate of CePO_(4)could reach about 95%,and the catalyst had more than 90%NO conversion rate between 260 and 320°C.The effect of PO_(4)^(3–),VO_(4)^(3–)and SO_(4)^(2–)on NH_(3)-SCR performances of Ce-based catalysts was systematically investigated by the X-ray photoelectron spectroscopy analysis,NH_(3)temperature programmed desorption,H2 temperature programmed reduction and field emission scanning electron microscopy tests.The key factors that can enhance the SCR are the existence of Ce4+,large NH_(3)adsorption capacity,high and early H2 consumptions,and suitable microstructures for gas adsorption.Finally,CePO_(4)and CeVO_(4)catalysts also exhibited relatively strong tolerance of SO2,and the upward trend about 8%was detected due to the sulfation enhancement by SO2 for Ce_(2)(SO_(4))3.展开更多
Ce-ZrO2 is a widely used three-way catalyst support. Because of the large surface area and excellent redox quality, Ce-ZrO2 may have potential application in selective catalytic reduction (SCR) systems. In the prese...Ce-ZrO2 is a widely used three-way catalyst support. Because of the large surface area and excellent redox quality, Ce-ZrO2 may have potential application in selective catalytic reduction (SCR) systems. In the present work, Ce-ZrO2 was introduced into a low-temperature SCR system and CeO2 and ZrO2 supports were also introduced to make a contrastive study. Mn/CeO2, Mn/ZrO2 and Mn/Ce-ZrO2 were prepared by impregnating these supports with Mn(NO3)2 solution, and have been characterized by N2-BET, XRD, TPR, TPD, XPS, FT-IR and TG. The activity and resistance to SO2 and H2O of the catalysts were investigated. Mn/Ce-ZrO2 and Mn/CeO2 were proved to have better low-temperature activities than Mn/ZrO2, and yielded 98.6% and 96.8% NO conversion at 180℃, respectively. This is mainly because Mn/Ce-ZrO2 and Mn/CeO2 had higher dispersion of manganese oxides, better redox properties and more weakly adsorbed oxygen species than Mn/ZrO2. In addition, Mn/Ce-ZrO2 showed a good resistance to SO2 and H2O and presented 87.1% NO conversion, even under SO2 and H2O treatment for 6 hours, and the activity of Mn/Ce-ZrO2 was almost restored to its original level after cutting off the injection of SO2 and H2O. This was due to the weak water absorption and weak sulfation process on the surface of the catalyst.展开更多
In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied compara...In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20%(All Ce contents are in mass fractions), but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce^(3+)species and more Br?nsted acid sites than that by impregnation. The vacancies caused by more Ce^(3+)species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOxspecies generated more Br?nsted acid sites. It could be supposed that dispersed Ce Oxspecies and WOxspecies offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by coprecipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts.展开更多
基金supported by the National Natural Science Foundation of China(21906090)the National Key Research and Development Program(2017YFC0210200,2017YFC0212800)Primary Research&Development Project of Shandong Province(2018GSF117034,2019JZZY020305).
文摘Activated red mud(RM)has been proved to be a promising base material for the selective catalysis reduction(SCR)of NOx.The inherent low reducibility and acidity limited its low-temperature activity.In this work,molybdenum oxide,tungsten oxide,and cerium oxide were used to reconfigure the redox sites and acid sites of red mud based catalyst.When activated red mud was reconfigured by cerium-tungsten oxide(Ce-W@RM),the NOx conversion kept above 90%at 219-480℃.The existence of Ce^(3+)/Ce^(4+) redox electron pairs provided more surface adsorbed oxygen(O_(α)) and served as a redox cycle.Positive interactions between Ce,W species and Fe oxide in red mud occurred,which led to the formation of unsaturated chemical bond and promoted the activation of adsorbed NH_(3) species.WO_(3) and Ce_(2)(WO_(4))_(3)(formed by solid-state reaction between Ce and W species)could provide more Brønsted acid sites(W-O modes of WO_(3),W=O or W-O-W modes of Ce_(2)(WO_(4))_(3)).CeO_(2) species could provide more Lewis acid sites.The Langmuir-Hinshelwood(L-H)routes and Eley-Rideal(E-R)routes occurred in the low-temperature SCR reaction on the Ce-W@RM surface.NH_(4)^(+) species on Brønsted acid sites,NH_(3) species on Lewis acid sites,bidentate nitrate and bridging nitrate species were key active intermediates species.
基金sponsored by the National Key R&D Program of China(Nos.2021YFC1910504,2019YFC 1907101,and 2019YFC1907103)the Key R&D Program of Ningxia Hui Autonomous Region,China(Nos.2020BCE01001 and 2021BEG01003)+3 种基金the National Natural Science Foundation of China(Nos.U2002212,51672024,52102058,and 52204414)the Xijiang Innovation and Entrepreneurship Team(No.2017A0109004)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP20-097A1Z and FRF-TP-20-031A1)the Foshan Science and Technology Innovation Special Foundation(No.BK22BE001)。
文摘This work aims to study the improvement effect of Sm on Mn-based catalysts for selective catalytic reduction (SCR) of NO with NH3.A series of Sm_(x)Mn_(0.3-x)-xTi catalysts (x=0,0.1,0.15,0.2,and 0.3) were prepared by co-precipitation.Activity tests indicated that the Sm_(0.15)Mn_(0.15)Ti catalyst showed superior performances,with a NO conversion of 100%and N_(2)selectivity above 87%at 180–300℃.The characterizations showed that Sm doping suppressed the crystallization of TiO_(2)and Mn2O3phases and increased the specific surface area and acidity.In particular,the surface area increased from 152.2 m^(2)·g^(-1)for Mn0.3Ti to 241.7 m^(2)·g^(-1)for Sm_(0.15)Mn_(0.15)Ti.These effects contributed to the high catalytic activity.The X-ray photoelectron spectroscopy (XPS) results indicated that the relative atomic ratios of Sm^(3+)/Sm and Oβ/O of Sm_(0.15)Mn_(0.15)Ti were 76.77at%and 44.11at%,respectively.The presence of Sm contributed to an increase in surface-absorbed oxygen (Oβ) and a decrease in Mn^(4+)surface concentration,which improved the catalytic activity.In the results of hydrogen temperature-programmed reduction(H_(2)-TPR),the presence of Sm induced a higher reduction temperature and lower H_(2)consumption (0.3 mmol·g^(-1)) for the Sm_(0.15)Mn_(0.15)Ti catalyst compared to the Mn0.3Ti catalyst.The decrease in Mn^(4+)weakened the redox property of the catalysts and increased the N_(2)selectivity by suppressing N_(2)O formation from NH3oxidation and the nonselective catalytic reduction reaction.The in situ diffuse reflectance infrared Fourier transform spectra (DRIFTs) revealed that NH3-SCR of NO over the Sm_(0.15)Mn_(0.15)Ti catalyst mainly followed the Eley–Rideal mechanism.Sm doping increased surface-absorbed oxygen and weakened the redox property to improve the NO conversion and N_(2)selectivity of the Sm_(0.15)Mn_(0.15)Ti catalyst.
基金supported by Project of Central Government for Local Science and Technology Development of China (2022JH6/100100050)the National Natural Science Foundation of China (21776028)Liaoning Key Laboratory of Chemical Additive Synthesis and Separation (ZJKF2001)。
文摘NH_(3) selective catalytic reduction(SCR) has been widely recognized as a promising technique for reducing nitrogen oxides from diesel vehicle exhausts. High-efficiency SCR catalysts that could perform at low temperatures are essential to denitration. In this work, a series of bimetallic CeCu-SAPO-34 molecular sieves were synthesized by one-step hydrothermal method. The Ce Cu-SAPO-34 maintained good crystallinity and a regular hexahedron appearance of Cu-SAPO-34 after introducing Ce species, while exhibiting a higher specific surface area and pore volume. The as-prepared CeCu-SAPO-34 with 0.02%(mass) Ce constituent exhibited the best catalytic activity below 300℃ and a maximum NO_(x) conversion of 99% was attained;the NO_(x) removal rates of more than 68% and 94% were achieved at 150℃ and 200℃, respectively. And the introduction of cerium species in Cu-SAPO-34 improves the low-temperature hydrothermal stability of the catalyst towards NH_(3)-SCR reaction. Additionally, the introduced Ce species could enhance the formation of abundant weak Br?nsted acid centers and promote the synergistic effect between CuO grains and isolated Cu^(2+) to enhance the redox cycle, which benefit the NH_(3)-SCR reaction.This work provides a facile synthesis method of high-efficiency SCR denitration catalysts towards diesel vehicles exhaust treatment under low temperature.
文摘Binary metal oxide(MnOx-A/TiO2)catalysts were prepared by adding the second metal to manganese oxides supported on titanium dioxide(TiO2),where,A indicates Fe2O3,WO3,MoO3,and Cr2O3.Their catalytic activity,N2 selectivity,and SO2 poisonous tolerance were investigated.The catalytic performance at low temperatures decreased in the following order:Mn-W/TiO2〉Mn-Fe/TiO2〉Mn-Cr/TiO2〉Mn-Mo/TiO2,whereas the N2 selectivity decreased in the order:Mn-Fe/TiO2〉Mn-W/TiO2〉Mn-Mo/TiO2〉Mn-Cr/TiO2.In the presence of 0.01%SO2 and 6%H2O,the NOx conversions in the presence of Mn-W/TiO2,Mn-Fe/TiO2,or Mn-Mo/TiO2 maintain 98.5%,95.8%and 94.2%, respectively,after 8 h at 120°C at GHSV 12600 h? 1 .As effective promoters,WO3 and Fe2O3 can increase N2 selectivity and the resistance to SO2 of MnOx/TiO2 significantly.The Fourier transform infrared(FTIR)spectra of NH3 over WO3 show the presence of Lewis acid sites.The results suggest that WO3 is the best promoter of MnOx/TiO2,and Mn-W/TiO2 is one of the most active catalysts for the low temperature selective catalytic reduction of NO with NH3.
基金Project supported by the CCSS of Shanxi Provincial Government of China(No.200032,200516)
文摘The catalyst of Fe-Mo/ZSM-5 has been found to be more active than Fe-ZSM-5 and Mo/ZSM-5 separately for selective catalytic reduction (SCR) of nitric oxide (NO) with NH3. The kinetics of the SCR reaction in the presence of O2 was studied in this work. The results showed that the observed reaction orders were 0.74-0.99, 0.01-0.13, and 0 for NO, O2 and NH3 at 350-450℃, respectively. And the apparent activation energy of the SCR was 65 kJ/mol on the Fe-Mo/ZSM-5 catalyst. The SCR mechanism was also deduced. Adsorbed NO species can react directly with adsorbed ammonia species on the active sites to form N2 and H2O. Gaseous O2 might serve as a reoxidizing agent for the active sites that have undergone reduction in the SCR process. It is also important to note that a certain amount of NO was decomposed directly over the Fe-Mo/ZSM-5 catalyst in the absence of NH3.
基金supported by Jiangsu Natural Science Foundation (No. BK2012347)the National High Technology and Development Program of China (863 Programs, No.2007AA061802)
文摘Catalytic properties of MnOx-FeOx complex oxide (hereafter denoted as Mn-Fe) catalysts modified with different loadings of chromium oxide were investigated by using the combination of physico-cbemical techniques, such as N2 physisorption, X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), in situ Fourier transform infrared spectroscopy (in situ FT-IR) and temperature-programmed reduction (TPR) and their catalytic activities were evaluated with the selective catalytic reduction (SCR) of NOx by NH3. It was found that with the addition of Cr, more NO could be removed in the low-temperature window (below 120 ℃). Among the tested catalysts, Mn-Fe- Cr (2 : 2 : 1) catalyst exhibited the best catalytic performance at 80 ℃ with the NO conversion higher than 90%. The combination of the reaction and characterization results indicated that (1) the strong interaction among tertiary metal oxides existed in the catalysts when Cr was appropriately added, which made the active components better dispersed with less agglomeration and sintering and the largest BET specific surface area could be obtained; (2) Cr improved the low-temperature reducibility of the catalyst and promoted the formation of the active intermediate (-NH3+), which favored the low-temperature SCR reaction.
基金Supported by the National High Technology Research and Development Program of China (863 Program, 2006AA06Z347)the NationalNatural Science Foundation of China (20773090).
文摘Monolithic catalysts of Pt/La-Al2O3 and Pt/Ce0.67Zr0.3302 were prepared to investigate methane selective catalytic reduction (SCR) of NO. The results indicate that Pt/Ce0.67Zr0.33O2 shows high activity and both NO and CH4 can be converted completely at 450℃. Meanwhile, NO and CH4 can be converted completely when there exists excess oxygen. The Pt/Ce0.67Zr0.33O2 catalyst were further investigated by using methane as reducing agent to SCR NO in a novel equipment which combined the CH4 selective catalytic reduction of NO with methane combustion. The result shows that the catalyst is high active and the novel equipment is very effective. The conversion of NO is above 92% under the conditions used in this work. The prepared burner and catalysts have great potential for application.
文摘The performance of Mn-W/TiO2 for selective catalytic reduction(SCR) of NOx with NH3 and its resistance to different concentrations of SO2 at various temperatures were investigated. The results show that WO3 increased the active sites and enhanced the strength of acid, so it was an effective promoter of MnOJTiO2. The NOx conversion on Mn-W/TiO2 ranges from 80.3% to 99.6% between 100 ℃to 350℃ at GHSV=18900 h 1, while N2 product selectivity changes from 100% to 98.7%. In the presence of 0.01% SO2 and 6% H20, NOx conversion maintained 98.5% at 120℃. The influence of more than 0.01% SO2 on the activity of MnOx-WO3/TiO2 will disappear if the temperature rises above 250℃. By means of heating and sweeping with He, the activity of the catalysts can be recovered. At 300℃, NOx conversion yielded 99% with 0.07% SO2 and reached the level of commercial V-W/TiO2 catalysts. The Mn-W/TiO2 catalyst showed excellent performance for SCR of NOx with NH3 in a wider range of temperature with strong tolerance to SO2.
基金supported by the National Key Research and Development Program of China (2018YFC0214103)the National Natural Science Foundation of China (22006044)the Scientific Research Funds of Huaqiao University (605-50Y200270001)。
文摘In this work,the characterizations of Cu-SSZ-13 after hydrothermal aging(HTA)and thermal aging(TA)at different temperatures(750,800,and 850°C)are compared,and the differences between those two serious aged samples are analyzed.With this data,the effect of steam on catalysts deactivation during hydrothermal aging is analyzed.The TA at 750 and 800°C causes the dealumination and the agglomeration of Cu^(2+)ions to Cu O,resulting in the activity loss of Cu-SSZ-13.The presence of steam upon HTA at750 and 800°C aggravates the catalyst deactivation by increasing the Al detachment and the Cu^(2+)agglomeration.The structure and cupric state are almost the same in the Cu-SSZ-13 after TA and HTA at 850°C,respectively,indicating that the steam has little influence on the deactivation.The formation of CuAl_(2)O_(4) spinel is the primary reason for the deactivation after both HTA and TA at 850°C,probably attributed to the strong interaction between Cu^(2+)ions and framework Al sites at high temperatures.
文摘The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction(SCR) of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and a N2 product selectivity of 100%—98.7% during 100 °C to 350 °C at gas hourly space velocity(GHSV)=18900 h-1.In the presence of 0.01% SO2 and 6% H2O at 120 °C,the NOx conversion can maintain 98.5%.At 300 °C and with 0.07% SO2 in reactant stream,the NOx conversion stabilized at 99% as high as the commercial V-W/TiO2 catalyst's level.The steady-state kinetics study shows that O2 played a promoting role.In the presence of less than 1.5% O2,NOx conversion can increase sharply with the increase of O2 concentration.The reaction order was zero with respect to NH3 and first with respect to NO with excess O2 and H2O.The kinetics active energy(Ea) of Mn-W/TiO2 was calculated to be 6.24 kJ/mol according to the kinetic experiment at various temperatures,much lower than those of other catalysts reported in the literature.Mn-W/TiO2 is an excellent catalyst for SCR of NO with NH3 by now.
基金Open Fund of Key Laboratory of Ministry of Education for Metallurgical Emission Reduction and Comprehensive Utilization of Resources,China(No.JKF19-08)General Project of Science and Technology Plan of Yunnan Science and Technology Department,China(No.2019FB077)+1 种基金Industrialization Cultivation Project of Scientific Research Fund of Yunnan Provincial Department of Education,China(No.2016CYH07)Top Young Talents of Yunnan Ten Thousand Talents Plan,China(No.YNWR-QNBJ-2019-263)。
文摘To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.
基金the National Natural Science Foundation of China(20677006)
文摘Catalytic performance of W/HZSM-5 in selective catalytic reduction of NO by acetylene was investigated in a reaction system with 1600 ppm of NO, 800 ppm of C2H2, and 9.95% of O2 in He. It was found that promotional effect of tungsten on the reaction is strongly affected by catalyst preparation conditions and Si/Al ratio of the parent zeolite. A better dispersion of tungsten on HZSM-5 and relatively more monomeric tungsten species were found on 8%W/HZSM-5 prepared by impregnation of the zeolite with lower SiO2/A1203 ratio (25) in ammonic ammonium tungstate solution and calcination of the resulting material at higher temperature (550 ℃). The highest NO conversion to N2 of 86.3% in the reaction system was obtained at 350 ℃ over the catalyst thus prepared. The mechanism of monomeric tungsten species improving the C2H2-SCR can be attributed to accelerating the formation of active nitrate species.
基金supported by the National Natural Science Foundation of China(52036008).
文摘Waste selective catalytic reduction(SCR)catalyst as a hazardous waste has a significant impact on the environment and human health.In present study,a novel technology for thermal treatment of waste SCR catalyst was proposed by adding it to sinter mix for iron ore sintering.The influences of coke rate on the flame front propagation,sinter microstructure,and sinter quality during sintering co-processing the waste SCR catalyst process were studied.In situ tests results indicated the maximum sintering bed temperature increased at higher coke rate,indicating more liquid phase generated and higher airflow resistance.The sintering time was longer and the calculated flame front speed dropped at higher coke rate.Sinter microstructure results found the coalescence and reshaping of bubbles were more fully with increasing coke rate.The porosity dropped from 35.28%to 25.66%,the pore average diameter of large pores decreased from 383.76μm to 311.43μm.With increasing coke rate,the sinter indexes of tumbler index,productivity,and yield,increased from 33.2%,9.2 t·m^(-2)·d^(-1),28.9%to 58.0%,36.0 t·m^(-2)·d^(-1),68.9%,respectively.Finally,a comprehensive index was introduced to systematically assess the influence of coke rate on sinter quality,which rose from 100 to 200 when coke rate was increased from 3.5%(mass)to 5.5%(mass).
基金supported by National Key Research and Development Project of China(No.2019YFC1805503)National Engineering Laboratory for Mobile Source Emission Control Technology(No.NELMS2019A13)+1 种基金the Open Project Program of the State Key Laboratory of Petroleum Pollution Control(No.PPC2019013)Major Science and Technology Projects of Shanxi Province(No.20181102017)。
文摘The presented work reports the selective catalytic reduction(SCR)of NO_(x) assisted by dielectric barrier discharge plasma via simulating marine diesel engine exhaust,and the experimental results demonstrate that the low-temperature activity of NH_(3)-SCR assisted by non-thermal plasma is enhanced significantly,particularly in the presence of a C_(3)H_(6) additive.Simultaneously,CeMnZrO_(x)@TiO_(2) exhibits strong tolerance to SO_(2) poisoning and superior catalytic stability.It is worthwhile to explore a new approach to remove NO_(x) from marine diesel engine exhaust,which is of vital significance for both academic research and practical applications.
基金supported by the Ministry of Science and Technology of the People’s Republic of China[Grant number 2017YFC0211305]the Science Fund of State Key Laboratory of Engine Reliability[Grant number Skler-201610].
文摘The influences of steam and sulfide on the efficiency of NOx reduction using ammonia(NH_(3))over the nanometer-class V-W/Ti catalyst in conditions of high temperature is experimentally investigated using a steady-flow reactor.The results showed that selective catalytic reduction(SCR)is inhibited by H_(2)O at low temperature,but higher NO conversion efficiency is achieved at high temperature since the reaction of NH_(3) oxidized by O_(2) to NOx is inhibited by H_(2)O.The activity of SCR is promoted by SO_(2) in the temperature range of 200~500℃,the NO conversion efficiency was improved to 98%from 94%by adding SO_(2).SCR would be improved at 350~500℃ when H_(2)O and SO_(2) exist at the same time.Furthermore,the positive influence to the NOx conversion was proved in the presence of H_(2)O and SO_(2) as a result of the European Stationary Cycle test.
基金Project supported by the National Natural Science Foundation of China(21922602,U1905214,22106101)Shanghai Science and Technology Innovation Action Plan(20dz1204200)Fundamental Research Funds for the Central Universities。
文摘Various Er modified MnO_(x) catalysts were synthesized using co-precipitation approach and tested in the selective catalytic reduction of NO_(x) by ammonia(NH_(3)-SCR).Catalysts were analyzed with various characterization techniques,and it is found that the doping of Er can enormously enhance the catalytic performance of MnO_(x)catalyst.MnEr_(0.1)demonstrates advantageous catalytic performance in the NH_(3)-SCR reaction owing to rich surface acidic sites,high surface content of Mn^(4+),superior redox capacity,and enhanced surface-adsorbed oxygen.From diffuse reflectance infrared Fourier transform spectroscopy(DRIFTs)analysis,it is suggested that the MnEr0.1catalyst follows mainly Eley-Rideal mechanism while MnO_(x) is dominated by Langmuir-Hinshelwood mechanism.
基金This work was financially supported by the National Natural Science Foundation of China(Grant No.52102367)And the tests of XRD and XPS were supported by Research and Test Center of Materials,Wuhan University of TechnologyDRIFTS,TPD and TPR tests were supported by State Key Laboratory of Silicate Materials for Architectures,Wuhan University of Technology.
文摘Three kinds of Ce-based catalysts(CePO_(4),CeVO_(4),Ce_(2)(SO_(4))_(3))were synthesized and used for the selective catalytic reduction(SCR)of NO by NH_(3).NH_(3)-SCR performances were conducted in the temperature range of 80 to 400°C.The catalytic efficiencies of the three catalysts are as follow:CePO_(4)>CeVO_(4)>Ce_(2)(SO_(4))_(3),which is in agreement with their abilities of NH_(3)adsorption capacities.The highest NO conversion rate of CePO_(4)could reach about 95%,and the catalyst had more than 90%NO conversion rate between 260 and 320°C.The effect of PO_(4)^(3–),VO_(4)^(3–)and SO_(4)^(2–)on NH_(3)-SCR performances of Ce-based catalysts was systematically investigated by the X-ray photoelectron spectroscopy analysis,NH_(3)temperature programmed desorption,H2 temperature programmed reduction and field emission scanning electron microscopy tests.The key factors that can enhance the SCR are the existence of Ce4+,large NH_(3)adsorption capacity,high and early H2 consumptions,and suitable microstructures for gas adsorption.Finally,CePO_(4)and CeVO_(4)catalysts also exhibited relatively strong tolerance of SO2,and the upward trend about 8%was detected due to the sulfation enhancement by SO2 for Ce_(2)(SO_(4))3.
基金supported by the National Natural Science Foundation of China (No. 51176077,50976050)the Tianjin Municipal Natural Science Foundation Project(No. 12JCZDJC29300)
文摘Ce-ZrO2 is a widely used three-way catalyst support. Because of the large surface area and excellent redox quality, Ce-ZrO2 may have potential application in selective catalytic reduction (SCR) systems. In the present work, Ce-ZrO2 was introduced into a low-temperature SCR system and CeO2 and ZrO2 supports were also introduced to make a contrastive study. Mn/CeO2, Mn/ZrO2 and Mn/Ce-ZrO2 were prepared by impregnating these supports with Mn(NO3)2 solution, and have been characterized by N2-BET, XRD, TPR, TPD, XPS, FT-IR and TG. The activity and resistance to SO2 and H2O of the catalysts were investigated. Mn/Ce-ZrO2 and Mn/CeO2 were proved to have better low-temperature activities than Mn/ZrO2, and yielded 98.6% and 96.8% NO conversion at 180℃, respectively. This is mainly because Mn/Ce-ZrO2 and Mn/CeO2 had higher dispersion of manganese oxides, better redox properties and more weakly adsorbed oxygen species than Mn/ZrO2. In addition, Mn/Ce-ZrO2 showed a good resistance to SO2 and H2O and presented 87.1% NO conversion, even under SO2 and H2O treatment for 6 hours, and the activity of Mn/Ce-ZrO2 was almost restored to its original level after cutting off the injection of SO2 and H2O. This was due to the weak water absorption and weak sulfation process on the surface of the catalyst.
基金Project supported by the Guangxi Natural Science Foundation(2014GXNSFAA118057)Guangxi Science and Technology Planning Project(AB16380276)
文摘In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOxby NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20%(All Ce contents are in mass fractions), but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce^(3+)species and more Br?nsted acid sites than that by impregnation. The vacancies caused by more Ce^(3+)species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOxspecies generated more Br?nsted acid sites. It could be supposed that dispersed Ce Oxspecies and WOxspecies offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by coprecipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts.