Preparation of a highly efficient Pt/USY catalyst for hydrogenation and selective ring-opening reaction of tetralin

Ultrastable Y zeolite（USY）-supported Pt catalyst was prepared by gas-bubbling-assisted membrane reduction. The influence of reaction conditions and the metal and acid sites of catalysts on the catalytic performance of catalyst in hydrogenation and selective ring opening of tetralin, 1,2,3,4-tetrahydronaphthalene（THN）, was studied. It was found that the optimal reaction conditions were at a temperature of 280 °C, hydrogen pressure of 4 MPa, liquid hourly space velocity of 2 h^-1 and H2/THN ratio of 750. Under these optimal conditions, a high conversion of almost 100% was achieved on the 0.3 Pt/USY catalyst. XRD patterns and TEM images revealed that Pt particles were highly dispersed on the USY, favorable to the hydrogenation reaction of tetralin. Ammonia temperature-programmed desorption and Py-IR results indicated that the introduction of Pt can reduce the acid sites of USY, particularly the strong acid sites of USY. Thus, the hydrocracking reaction can be suppressed.

Approaches to Improving Selectivity During Photoelectrochemical Transformation of Small Molecules

Photoelectrochemical (PEC) small-molecule oxidation can selectively transform substrates into high-value-added fine chemicals and increase the rate of cathode hydrogen evolution. Nevertheless, achieving high-selectivity PEC oxidation of small molecules to produce specific products is a very challenging task. In general, selectivity can be improved by changing the surface catalyticsites of the photoanode and modulating the interfacial environments of the reactions. Herein, recent advances in approaches to improving selective PEC oxidation of small molecules are introduced. We first briefly discuss the basic concept and fundamentals of small-molecule PEC oxidation. The reported approaches to improving the performance of selective PEC oxidation of small molecules are highlighted from two aspects: (1) changing the surface properties of photoanodes by selecting suitable materials or modifying the photoanodes and (2) mediating the oxidation reactions using redox mediators. The PEC oxidation mechanism of these studies is emphasized. We also discuss the challenges in this research direction and offer a perspective on the further development of selective PEC-based small-molecule transformation.

Enhancing selectivity in acidic CO_(2) electrolysis:Cation effects and catalyst innovation

The electrochemical reduction of CO_(2)(eCO_(2)R)under ambient conditions is crucial for reducing carbon emissions and achieving carbon neutrality.Despite progress with alkaline and neutral electrolytes,their efficiency is limited by(bi)carbonates formation.Acidic media have emerged as a solution,addressing the(bi)carbonates challenge but introducing the issue of the hydrogen evolu-tion reaction(HER),which reduces CO_(2) conversion efficiency in acidic environments.This review focuses on enhancing the selectivity of acidic CO_(2) electrolysis.It commences with an overview of the latest advancements in acidic CO_(2) electrolysis,focusing on product selectivity and electrocatalytic activity enhancements.It then delves into the critical factors shaping selectivity in acidic CO_(2) electrolysis,with a special emphasis on the influence of cations and catalyst design.Finally,the research challenges and personal perspectives of acidic CO_(2) electrolysis are suggested.

Laser-Constructing 3D Copper Current Collector with Crystalline Orientation Selectivity for Stable Lithium Metal Batteries

The practical application of lithium(Li)metal anodes in high-capacity batteries is impeded by the formation of hazardous Li dendrites.To address this challenge,this research presents a novel methodology that combines laser ablation and heat treatment to precisely induce controlled grain growth within laser-structured grooves on copper(Cu)current collectors.Specifically,this approach enhances the prevalence of Cu(100)facets within the grooves,effectively lowering the overpotential for Li nucleation and promoting preferential Li deposition.Unlike approaches that modify the entire surface of collectors,our work focuses on selectively enhancing lithiophilicity within the grooves to mitigate the formation of Li dendrites and exhibit exceptional performance metrics.The half-cell with these collectors maintains a remarkable Coulombic efficiency of 97.42%over 350 cycles at 1 mA cm^(−2).The symmetric cell can cycle stably for 1600 h at 0.5 mA cm^(−2).Furthermore,when integrated with LiFePO4 cathodes,the full-cell configuration demonstrates outstanding capacity retention of 92.39%after 400 cycles at a 1C discharge rate.This study introduces a novel technique for fabricating selective lithiophilic three-dimensional(3D)Cu current collectors,thereby enhancing the performance of Li metal batteries.The insights gained from this approach hold promise for enhancing the performance of all laser-processed 3D Cu current collectors by enabling precise lithiophilic modifications within complex structures.

Tuning the product selectivity of dimethyl oxalate hydrogenation over WO_(x) modified Cu/SiO_(2) catalysts

Product selectivity and reaction pathway are highly dependent on surface structure of heterogeneous catalysts.For vapor-phase hydrogenation of dimethyl oxalate(DMO),"EG route"(DMO→methyl glycolate(MG)ethylene glycol(EG)→ethanol(ET))and"MA route"(DMO→MG→methyl acetate(MA))were proposed over traditional Cu based catalysts and Mo-based or Fe-based catalysts,respectively.Herein,tunable yield of ET(93.7%)and MA(72.1%)were obtained through different reaction routes over WO_(x) modified Cu/SiO_(2) catalysts,and the corresponding reaction route was further proved by kinetic study and in-situ DRIFTS technology.Mechanistic studies demonstrated that H_(2) activation ability,acid density and Cu-WO_(x) interaction on the catalysts were tuned by regulating the surface W density,which resulted in the different reaction pathway and product selectivity.What's more,high yield of MA produced from DMO hydrogenation was firstly reported with the H_(2) pressure as low as 0.5 MPa.

An mmWave Dual-Band Integrated Substrate Gap Waveguide Single Cavity Filter with Frequency Selectivity

A novel dual-band ISGW cavity filter with enhanced frequency selectivity is proposed in this paper by utilizing a multi-mode coupling topology.Its cavity is designed to control the number of modes,and then the ports are determined by analyzing the coupling relationship between these selected modes.By synthesizing the coupling matrix of the filter,a nonresonating node(NRN)structure is introduced to flexibly tune the frequency of modes,which gets a dualband and quad-band filtering response from a tri-band filter no the NRN.Furthermore,a frequency selective surface(FSS)has been newly designed as the upper surface of the cavity,which significantly improves the bad out-of-band suppression and frequency selectivity that often exists in most traditional cavity filter designs and measurements.The results show that its two center frequencies are f01=27.50 GHz and f02=32.92GHz,respectively.Compared with the dual-band filter that there is no the FSS metasurface,the out-of-band suppression level is improved from measured 5 dB to18 dB,and its finite transmission zero(FTZ)numbers is increased from measured 1 to 4 between the two designed bands.Compared with the tri-band and quadband filter,its passband bandwidth is expanded from measured 1.17%,1.14%,and 1.13% or 1.31%,1.50%,0.56%,and 0.57% to 1.71% and 1.87%.In addition,the filter has compact,small,and lightweight characteristics.

High adsorption selectivity of activated carbon and carbon molecular sieve boosting CO_(2)/N_(2) and CH_(4)/N_(2) separation

Flue gas and coal bed methane are two important sources of greenhouse gases.Pressure swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is crucial.In this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 kPa.The experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric heat.Both the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular sieve.Moreover,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) separation.The study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.

An efficient strategy for the preparation of MIL-53(Al)-NH_(2)membranes with high ion selectivity and desalination performance

The efficient extraction of sodium(Na^(+))and lithium(Li^(+))from seawater and salt lakes is increasingly demanding due to their great application value in chemical industries.However,coexisting cations such as divalent calcium(Ca^(2+))and magnesium(Mg^(2+))ions are at the subnanometer scale in diameter,similar to target monovalent ions,making ion separation a great challenge.Here,we propose a simple and fast secondary growth method for the preparation of MIL-53(Al)-NH_(2)membranes on the surface of anodic aluminum oxide.Such membranes contain angstrom-scale(~7Å)channels for the entrance of small monovalent ions and water molecules,endowing the selectivities for monovalent cations over divalent cations and water over salt molecules.The resulting high-connectivity MIL-53(Al)-NH_(2)membranes exhibit excellent ion separation performance(a selectivity of 121.42 for Na^(+)/Ca^(2+)and 93.81 for Li^(+)/Mg^(2+))and desalination performance(a water/salt selectivity of up to 5196).This work highlights metal–organic framework membranes as potential candidates for realizing ion separation and desalination in liquid treatment.

基于SELECT理念腹腔镜下保留脾脏的胰体尾切除

腹腔镜下胰体尾切除术目前已经成为治疗胰腺体尾部肿瘤的标准术式。而腹腔镜下保留脾脏的胰体尾切除术由于可保留脾脏功能,减少脾切除术后并发症,越来越受到重视。然而,胰腺肿瘤发病隐匿、解剖位置复杂,这些对其诊断和保留脾脏的胰体尾切除术带来了挑战。近年来,我们团队积累了丰富的胰腺肿瘤诊疗经验,创新提出“SELECT”(S-Single-Operator Cholangiopancreatoscopy,E-ERCP,L-Laparoscopy,E-Endoscopic ultrasound,C-Choledochoscopy/Confocal laser endomicroscopy,T-Traditional Chinese medicine)多镜组合中西医微创诊治理念。根据胰腺肿瘤的类型及特点,应用多种内镜和腹腔镜技术,多种不同微创诊疗方法的优选组合,围手术期采用中医药,进行中西医结合加速康复。将SELECT理念充分应用于腹腔镜下保留脾脏的胰体尾切除术,有利于术前精准诊断、术中精准切除、术后并发症预判和治疗,一站式诊治胰腺肿瘤,使病人利益最大化。

On the Manipulation of the Selectivity of Encoding and Decoding overthe Translator's Subjectivity

The translation activity is a process of the interlinguistic transmission of information realized by the information encoding and decoding.Encoding and decoding,cognitive practices operated in objective contexts,are inevitably of selectivity ascribing to the restriction of contextual reasons.The translator as the intermediary agent connects the original author(encoder)and the target readers(decoder),shouldering the dual duties of the decoder and the encoder,for which his subjectivity is irrevocably manipulated by the selectivity of encoding and decoding.

CO2 hydrogenation to methanol over Cu/CeO2 and Cu/ZrO2 catalysts:Tuning methanol selectivity via metal-support interaction

Copper-based catalysts for CO2 hydrogenation to methanol are supported on ZrO2 and CeO2,respectively.Reaction results at 3.0 MPa and temperatures between 200 and 300°C reveal that Cu catalysts supported on ZrO2 and CeO2 exhibit better activity and selectivity than pure Cu catalyst due to Cu-support(ZrO2 and CeO2)interaction.Combining the structural characterizations with in-situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRIFTS),Cu/CeO2 shows the higher methanol selectivity due to the formation of main carbonates intermediates,which are closely related with the oxygen vacancies over Cu/CeO2.In contrast,bicarbonate and carboxyl species are observed on Cu/ZrO2,which originates from the hydroxyl groups presented on catalyst surfaces.Difference in CO2 adsorption intermediates results in the distinct methanol selectivity over the two catalysts.

Pun's Effectiveness and Selectivity in English Advertisements

This paper lays particular emphasis on pun's effectiveness and selectivity in English advertisements.The illustration and examples can help us understand the English advertisements well and foster our ability to appreciate the charm of English.

Performance evaluation for selectivity of the flocculant on hematite in selective flocculation

Increased demand for iron ore necessitates the utilization of low-grade iron ore fines, slimes, and existing tailings. Selective flocculation can be an alternative physico-chemical process for utilizing these low-grade fines, slimes, and tailings. In selective fiocculation, the most critical objective is the selection of proper reagents that will make fioc of desired minerals. In present study, selective flocculation was applied to ultra-fine synthetic mixtures of hematite and kaolinite, and the Fe value was upgraded up to 65.78% with the reduction of Al2O3 and SiO2 values to 2.65% and 3.6670, respectively. Here, degraded wheat starch was used as a flocculant.In this process, separation occurs on the basis of the selectivity of the flocculant. The selectivity of the fiocculant can be quantified in terms of separation efficiency. Here, an attempt was also made to develop a correlation between separation efficiency and major operating parameters such as flocculent dose, pH value, and solid concentration to predict the separation performance.

Electrochemical characterization of ion selectivity in electrodeposited nickel hexacyanoferrate thin films

The ion selectivity of electrodeposited nickel hexacyanoferrate （NiHCF） thin films was investigated using electrochemical impedance spectroscopy （EIS） and cyclic voltammetry （CV）. NiHCF thin films were prepared by cathodic deposition on Pt and Al substrates. EIS and CV curves were determined in 1 mol/L （KNO3＋C5NO3） and 1 mol/L （NaNO3＋CsNO3） mixture solutions, which were sensitive to the concentration of Cs^＋ in the electrolytes. Experimental results show that all Nyquist impedance plots show depressed semicircles in the high-frequency range changing over into straight lines at lower frequencies. With increasing amounts of Cs^＋, the redox potentials in CV curves shift toward more positive values and the redox peaks broaden; the semicircle radius in corresponding EIS curves and the charge transfer resistance also increase. EIS combining CV is able to provide valuable insights into the ion selectivity of NiHCF thin films. 2008 University of Science and Technology Beijing. All rights reserved.

Selectivity and sublethal effects of some frequently-used biopesticides on the predator Cyrtorhinus lividipennis Reuter(Hemiptera: Miridae)

The green miridbug,Cyrtorhinus lividipennis,is an important predator of the rice brown planthopper,Nilaparvata lugens.In this study,the selective toxicity of seven commercial biopesticides for C.lividipennis was examined under laboratory conditions; abamectin was the most selective to C.lividipennis,followed by matrine and azadirachtin.Veratridine,rotenone,Bacillus thuringiensis and Beauveria bassiana showed less selectivity for C.lividipennis.Subsequently,matrine,abamectin and azadirachtin were selected for sublethal assessments with respect to C.lividipennis due to their high toxicities to N.lugens.C.lividipennis treated with sublethal concentrations(LC10 and LC20) of the three biopesticides could distinguish volatiles released from healthy and N.lugens-infested plants indicating that the biopesticides tested did not affect the foraging ability of surviving miridbugs.Azadirachtin decreased the consumption capability of C.lividipennis when the densities of N.lugens were 20,30,40 and 50 insects per vial.Sublethal concentration treatment did not impact the pre-oviposition period or egg hatchability of C.lividipennis.However,the fecundity of C.lividipennis exposed to azadirachtin and abamectin increased by 27–41% compared to the untreated individuals.In summary,abamectin or matrine together with C.lividipennis could be considered an effective,sustainable pest management strategy for rice.

The template-assisted zinc ion incorporation in SAPO-34 and the enhanced ethylene selectivity in MTO reaction

The SAPO-34 catalyst was fine-tuned with zinc cations through a straightforward template-assisted ion incorporation (TH) process, without the necessary template pre-removal and the preparation of NH4- SAPO-34 intermediate, which is more facile, efficient and cost-effective than the conventional ion exchange process. The template-assisted zinc cations incorporated SAPO-34 catalysts were characterized by XRD, XRF, N2 adsorption-desorption, XPS, SEM, EDX,NMR, respectively. Enhanced selectivity to ethylene and ratio of ethylene to propylene in MTO reaction are observed over the zinc cations modified SAPO-34 catalysts, due to the facilitated formation of lower methylbenzenes that favour the ethylene gen eration, as well as the increased diffusion hindrance originated from the zinc cations incorporation and the facil让ated generation of aromatics compound.

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper,ring-opening polymerization of trimethylene carbonate(TMC)with rare earth(Nd,Y,La)ρ-tert- butylcalix[n]arene(n=4,6,and 8)complexes as catalysts has been studied.Poly(trimethylene carbonate)(PTMC)with M_v of 21,400 was produced by bulk polymerization under the conditions as follows:[TMC]_0/[Nd](molar ratio)=1000,80℃, 8 h.Mechanism study reveals that the polymerization proceeds via a coordination mechanism.

Enhancement of bimetallic Fe-Mn/CNTs nano catalyst activity and product selectivity using microemulsion technique

Bimetallic Fe-Mn nano catalysts supported on carbon nanotubes(CNTs) were prepared using microemulsion technique with water-to-surfactant ratios of 0.4-1.6. The nano catalysts were extensively characterized by different methods and their activity and selectivity in Fischer-Tropsch synthesis(FTS) have been assessed in a fixed-bed microreactor. The physicochemical properties and performance of the nanocatalysts were compared with the catalyst prepared by impregnation method. Very narrow particle size distribution has been produced by the microemulsion technique at relatively high loading of active metal. TEM images showed that small metal nano particles in the range of 3–7 nm were not only confined inside the CNTs but also located on the outer surface of the CNTs. Using microemulsion technique with water to surfactant ratio of0.4 decreased the average iron particle sizes to 5.1 nm. The reduction percentage and dispersion percentage were almost doubled. Activity and selectivity were found to be dependent on the catalyst preparation method and average iron particle size. CO conversion and FTS rate increased from 49.1% to 71.0% and 0.144 to 0.289 gHC/(gcat h), respectively. While the WGS rate decreased from 0.097 to 0.056 gCO2/(gcat h). C5+liquid hydrocarbons selectivity decreased slightly and olefins selectivity almost doubled.

Industrial catalysis:Strategies to enhance selectivity

Precise control of catalytic selectivity is a key concept of green chemistry,and also an important driving force for the sustainable development of catalytic industry.Selectivity not only determines the atomic economy of the catalytic process,but also affects the energy consumption of subsequent separation process.The objective of this review is to illustrate successful catalyst design strategies to enhance selectivity,by using several important catalytic cases of petroleum refining and petrochemicals.These industrial applications and cutting-edge research cases mainly use the strategies of coupling,decoupling or confinement of adsorption sites and active sites to tune the diffusion barrier and activation energy barrier in different routes,so as to improve the selectivity of catalyst.Based on the preliminary understanding of selectivity improvement,it is necessary to systematically investigate the selective catalytic processes using combination of multiple strategies,thereby realizing the design of highly selective catalyst over reasonable time scales and space scales.

A Method of Determining Selectivity Coefficients Based on the Practical Slope of Ion Selective Electrodes

It is a problem to be solved that the experimental selectivity coefficients of ion selective electrodes (ISEs) depend on the activity. This paper studied the new method of determining selectivity coefficients. A mixed ion response equation, which was similar to Nicolsky-Eisenman (N-E) equation recommended by IUPAC, was proposed. The equation includes the practical response slope of ISEs to the primary ion and the interfering ion. The selectivity coefficient was defined by the equation instead of the N-E equation. The experimental part of the method is similar to that based on the N-E equation. The values of selectivity coefficients obtained with this method do not depend on the activity whether the electrodes exhibit the Nernst response or non-Nernst response. The feasibility of the new method is illustrated experimentally.