Motion Planning Algorithms of Redundant Manipulators Based on Self-motion Manifolds

The current motion planning approaches for redundant manipulators mainly includes two categories： improved gradient-projection method and some other efficiency numerical methods. The former is excessively sensitive to parameters, which makes adjustment difficult; and the latter treats the motion planning as general task by ignoring the particularity, which has good universal property but reduces the solving speed for on-line real-time planning. In this paper, a novel stepwise solution based on self-motion manifold is proposed for motion planning of redundant manipulators, namely, the chief tasks and secondary tasks are implemented step by step. Firstly, the posture tracking of end-effector is achieved accurately by employing the non-redundant joint. Secondly, the end-effector is set to keep stationary. Finally, self-motion of manipulator is realized via additional work on the gradient of redundant joint displacement. To verify this solution, experiments of round obstacle avoiding are carried out via the planar 3 degree-of-~eedom manipulator. And the experimental results indicate that this motion planning algorithm can effectively achieve obstacle avoiding and posture tracking of the end-effector. Compared with traditional gradient projection method, this approach can accelerate the problem-solving process, and is more applicable to obstacle avoiding and other additional work in displacement level.

A Real Time Self-Tuning Motion Controller for Mobile Robot Systems

This paper proposes an intelligent controller for motion control of robotic systems to obtain high precision tracking without the need for a real-time trial and error method.In addition, a new self-tuning algorithm has been developed based on both the ant colony algorithm and a fuzzy system for real-time tuning of controller parameters. Simulations and experiments using a real robot have been addressed to demonstrate the success of the proposed controller and validate the theoretical analysis. Obtained results confirm that the proposed controller ensures robust performance in the presence of disturbances and parametric uncertainties without the need for adjustment of control law parameters by a trial and error method.

Averaging Analysis of Self-Excited Motion of a Quasi-Axisymmetrical Gyrostat

The averaging analysis was carried out to study the motion of a quasi axisymmetrical gyrostat under a small magnitude self excited control torque. The common approach to investigating the problem of rigid body rotation under the action of a small torque known in the body frame was described. Using this approach, the problem (Grammel's problem for the case of small torque) that is maintaining the angular velocity of a quasi axisymmetrical gyrostat using a control torque quadratic in the angular velocity was solved.

THE SELF-GRINDING MECHANISM AND AFFECTING FACTORS OF BULK MATERIAL IN FLUID MOTION

The fluidity and classification of bulk material (loose body) were introduced, the self-grinding mechanism and the affecting factors of bulk materials in various forms of phase, state and motion were investigated. A rotational-flow-state centrifugal autogenous grinder was developed on the basis of applying self-grinding mechanism of bulk material,the result tested by the autogenous grinder was compared with that tested by 4R Raymond mills, and fine particles with extremely high specific area were obtained. The feasibility of the developed new-type autogenous grinder in the view of fluid motion of bulk material was proved.

“Eternal Motion” as a “Form of Movement of a Special Nature” and the Main Condition for the Creation of the Universe

The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-sufficiency, and by “Special Nature”, gravitational and two other properties of matter, “tied” to the “Eternal Movement” and completely dependent on it. Carriers of key properties of a “Special Nature” have been established: “0”-DE particles and “3”-DM particles (UDM). The unity of their inherent “motionally-gravitational” properties and the peculiarity of the relationship between “motion” and “gravity” are revealed: the higher the intensity of “Eternal Motion”, the stronger the gravitational properties of matter are manifested (and vice versa). The relationship of “time” with the “vibration frequency” and the “mass” of photons with the “degree of bonding and deformation properties of the field” is shown. The maximum level of gravity has been determined, which allows Nature to successfully create the Universe: such a landmark is the proximity to the property of the Primary Source—the “pure graviton” of the OSP space, the most powerful “motionally-gravitational” particle of the Universe. The reasons for the emergence of such an identity of the gravitational properties of particles with the indicators of a “pure graviton” are established: for “0”-DE particles, this is the acquisition of the function of “freedom of movement”;for “3”-DM particles (UDM), the creation of a special structure—a “double field” (“Main” and “Small”). The presence in the “double field” of specific “tools” for the creation of the worlds of the Universe—gravitational “waves” gives rise to impulses (shocks) of varying intensity and shape. A list of functions performed by “waves” in the “Main” and “Small” fields has been compiled. The specific conditions for the formation of “UDM Streams”, their transformation into a “Vortex” and, under the influence of a powerful Initial Impulse (push), sending them to the “place” of the creation of galaxies, are shown. It is suggested that there is a “Cycle of Matter in Nature” in the closed structure of our Universe due to the “work” of “waves” and the functioning of special “factories” in the form of exotic space objects—Black holes.

Self-propulsion of flapping bodies in viscous fluids: Recent advances and perspectives

Flapping-powered propulsion is used by many animals to locomote through air or water. Here we review recent experimental and numerical studies on self-propelled mechanical systems powered by a flapping motion. These studies improve our understanding of the mutual interaction between actively flapping bodies and surrounding fluids. The results obtained in these works provide not only new insights into biolocomotion but also useful information for the biomimetic design of artificial flyers and swimmers.

Forward flight of a model butterfly: Simulation by equations of motion coupled with the Navier-Stokes equations

The forward flight of a model butterfly was stud- ied by simulation using the equations of motion coupled with the Navier-Stokes equations. The model butterfly moved under the action of aerodynamic and gravitational forces, where the aerodynamic forces were generated by flapping wings which moved with the body, allowing the body os- cillations of the model butterfly to be simulated. The main results are as follows： （1） The aerodynamic force produced by the wings is approximately perpendicular to the long-axis of body and is much larger in the downstroke than in the up- stroke. In the downstroke the body pitch angle is small and the large aerodynamic force points up and slightly backward, giving the weight-supporting vertical force and a small neg- ative horizontal force, whilst in the upstroke, the body an- gle is large and the relatively small aerodynamic force points forward and slightly downward, giving a positive horizon- tal force which overcomes the body drag and the negative horizontal force generated in the downstroke. （2） Pitching oscillation of the butterfly body plays an equivalent role of the wing-rotation of many other insects. （3） The body-mass- specific power of the model butterfly is 33.3 W/kg, not very different from that of many other insects, e.g., fruitflies and dragonflies.

Effect of varying normal stress on stability and dynamic motion of a spring-slider system with rate- and state-dependent friction

Incorporating rate and state friction laws, stability of linearly stable （i.e., with stiffness greater than the critical value） spring-slider systems subjected to triggering perturbations was analyzed under variable normal stress condition, and comparison was made between our results and that of fixed normal stress cases revealed in previous studies. For systems associated with the slip law, the critical mag- nitude of rate steps for triggering unstable slips are found to have a similar pattern to the fixed normal stress case, and the critical velocity steps scale with a/（b - a） when k = kcr for both cases. The rate-step boundaries for the variable normal stress cases are revealed to be lower than the fixed normal stress case by 7 %-16 % for a relatively large ct = 0.56 with （b - a）/a ranging from 0.25 to 1, indicating easier triggering under the variable normal stress condition with rate steps. The difference between fixed and variable normal stress cases decreases when the α value is smaller. In the same slip- law-type systems, critical displacements to trigger instability are revealed to be little affected by the variable normal stress condition. When k 〉 kcr（V,）, a spring-slider system with the slowness law is much more stable than with the slip law,suggesting that the slowness law fits experimental data better when a single state variable is adopted. In stick-slip motions, the variable normal stress case has larger stress drops than the constant normal stress case. The variable normal stress has little effect on the range of slip velocity in systems associated with the slowness law, whereas systems associated with the slip law have a slowest slip velocity immensely smaller than the fixed normal stress case, by ~ 10 orders of magnitude.

Strong Local Non-Determinism of Sub-Fractional Brownian Motion

Let be a subfractional Brownian motion in . We prove that is strongly locally nondeterministic.

Numerical study on wave loads and motions of two ships advancing in waves by using three-dimensional translating-pulsating source

A frequency domain analysis method based on the three-dimensional translating-pulsating （3DTP） source Green function is developed to investigate wave loads and free motions of two ships advancing on parallel course in waves. Two experiments are carried out respectively to mea- sure the wave loads and the free motions for a pair of side-by- side arranged ship models advancing with an identical speed in head regular waves. For comparison, each model is also tested alone. Predictions obtained by the present solution are found in favorable agreement with the model tests and are more accurate than the traditional method based on the three dimensional pulsating （3DP） source Green function. Numer- ical resonances and peak shift can be found in the 3DP pre- dictions, which result from the wave energy trapped in the gap between two ships and the extremely inhomogeneous wave load distribution on each hull. However, they can be eliminated by 3DTP, in which the speed affects the free sur- face and most of the wave energy can be escaped from the gap. Both the experiment and the present prediction show that hydrodynamic interaction effects on wave loads and free motions are significant. The present solver may serve as a validated tool to predict wave loads and motions of two ves- sels under replenishment at sea, and may help to evaluate the hydrodynamic interaction effects on the ships safety in replenishment operation.

近断层地震动下摇摆-自复位桥墩连续梁地震反应

为讨论近断层地震动下摇摆-自复位(Rocking Self-Centering,RSC)桥墩连续梁的地震反应及其抗震优缺点。基于OpenSees有限元分析平台讨论了RSC桥墩三维建模方法,通过对6个试验构件的模拟,比较模拟与试验桥墩滞回曲线、预应力筋最大应力等指标,验证了模型准确性。建立设置RSC桥墩和普通钢筋混凝土(Reinforced Concrete,RC)桥墩的上部结构相同的两座连续梁桥,输入3组含有强速度脉冲的近断层地震波进行非线性动力时程分析,对比其抗震性能。结果表明:在0.4 g近断层地震动下,RSC桥墩与普通RC桥墩相比,RSC桥墩的最大位移角为普通RC桥墩的78.1%~97.6%,墩底曲率延性系数仅为普通RC桥墩的24.0%~34.0%,减小了桥墩的最大变形,也减轻了桥墩地震损伤,不利的一点是使用RSC桥墩会导致支座位移增大。RSC桥墩震后的残余位移较小,且预应力筋处于弹性受力阶段,为实现震后桥梁功能的快速恢复提供了条件。

Parameter Self - Learning of Generalized Predictive Control Using BP Neural Network

This paper describes the self—adjustment of some tuning-knobs of the generalized predictive controller(GPC).A three feedforward neural network was utilized to on line learn two key tuning-knobs of GPC,and BP algorithm was used for the training of the linking-weights of the neural network.Hence it gets rid of the difficulty of choosing these tuning-knobs manually and provides easier condition for the wide applications of GPC on industrial plants.Simulation results illustrated the effectiveness of the method.

Self - Crosslinking Behavior of Self - Emulsion Water - Based Polyure-thane Coating Agents

The relation between structures and properties of polyurethane are investigated by modern physical and chemical methods.The results obtained are as follows:the effects of the content of self-crosslinking agent on the properties of polyurethane,i.e.,dispersion stability,dynamical viscoelasticity and mechanical properties are discussed.It is found that the optimum molar ratio of epichlorohydrin and diethylenetriamine is 1:2.A mois-

Culture Self- Consciousness in Transmission of Chinese Philosophy from the Perspective of English Globalization -- Taking the Belt and Road Initiative for Example

The Belt and Road Initiative contains the aspiration of Chinese nation to pursue ideological freedom and desire of strengthening international exchanges and cooperation. This paper takes the Belt and Road Initiative for example,emphasizing the interpretation of the inheritance and development of Chinese culture so as to study the importance of Culture Self-Consciousness in Chinese Philosophy,in the context of English globalization. That is to say,this paper stresses the spirits and the stand of nation 's demonstration on pursuing peace,cooperation and sustainable development in the civilization continuity from traditional China to the contemporary China,with practical philosophic view.

Motion planning for redundant prismatic-jointed manipulators in the free-floating mode

This paper investigates the motion planning of redundant free-floating manipulators with seven prismatic joints. On the earth, prismatic-jointed manipulators could only position their end-effectors in a desired way. However, in space, the end-effectors of free-floating manipulators can achieve both the desired orientation and desired position due to the dynamical coupling between manipulator and satellite movement, which is formally expressed by linear and angular momentum conservation laws. In this study, a tractable algorithm particle swarm optimization combined with differential evolution （PSODE） is provided to deal with the motion planning of redundant free-floating prismatic-jointed manipulators, which could avoid the pseudo inverse of the Jacobian matrix. The polynomial functions, as argument in sine functions are used to specify the joint paths. The co- efficients of the polynomials are optimized to achieve the desired end-effector orientation and position, and simulta- neously minimize the unit-mass-kinetic energy using the redundancy. Relevant simulations prove that this method pro- vides satisfactory smooth paths for redundant free-floating prismatic-jointed manipulators. This study could help to recognize the advantages of redundant prismatic-jointed space manipulators.

Providing QoS guarantees for self-similar traffic flows

Provisioning network resource to meet the quality of Service (QoS) demand is a key issue for future network services. Such functions may be realized by an admission control algorithm, which determines whether or not a new traffic flow can be admitted into the network. It is widely accepted that many traffic flows have self-similar character that has detrimental influence on network performance. This characteristic has made old mathematical models invalid, and a new model must work with self-similar fractal instead. This paper applies Fractional Brownian Motion(FBM) model and integrates it into the comprehensive admission control scheme, which takes account of aggregated traffic behavior to get the statistical multiplexing performance gain. Experiment verifies that FBM model can be used to realistically describe packet traffic in modern packet networks and accurately predict their performance.

Movement of Self-Organizing Solitons in Ferromagnet

Precessing ball solitons (PBS) in a ferromagnet during the first order phase transition induced by a magnetic field directed along the axis of anisotropy, while the additional action of high-frequency field perpendicular to the main magnetic field, are analyzed. It is shown that the spatial motion of solitons, associated with thermal fluctuations in the crystal, does not destroy the equilibrium of self-organized PBS.

两轴径向独立轮副轨道车辆动力学性能

针对独立车轮导向问题提出后倾角导向方法,使独立轮副轨道车辆获得自导向能力。阐述车辆的自导向原理,利用横向轮轨力和后倾角力臂形成摇头力矩,使独立车轮自动转向。关于中心对称的前后独立轮副分别向相反方向转向,使独立车轮处于径向位置。采用多体动力学方法分析独立轮副轨道车辆的自导向性能。结果表明:在直线轨道上,后倾角对车辆横向位移和摇头角的影响明显。带后倾角车辆出现类蛇行运动现象。具有后倾角的车辆在直线轨道上能够自动复位。在曲线轨道上,左前导向轮具有较大的冲角。后倾角能够使车辆动态对中,最终回到轨道中心线位置。带后倾角的独立轮副轨道车辆在曲线轨道上具有有限的导向能力。

液压泵用推力球轴承疲劳剥落原因

某台液压泵推力球轴承发生疲劳剥落现象。采用宏观观察、化学成分分析、金相检验、硬度测试、压印深度测量等方法对轴承剥落的原因进行分析。结果表明:轴承发生疲劳剥落的原因为,保持架兜孔压印部位变形量大,钢球受到过度约束,钢球与保持架发生运动干涉,最终导致轴承疲劳剥落。采用聚醚醚酮材料制造的自锁保持架替代铜实体保持架,可有效改善推力球轴承疲劳剥落的问题。

近场脉冲型地震作用下附加支撑双柱式摇摆桥墩的抗震性能研究

为了解决摇摆桥墩承载力和耗能能力不足的问题,该文提出一种附加人字形支撑的双柱式摇摆桥墩结构,支撑为纯耗能支撑或自复位耗能支撑,支撑通过连接装置安装在双柱式摇摆桥墩的盖梁和承台之间。为了研究新型附加人字形支撑双柱式摇摆桥墩的抗震性能,对其进行拟静力分析,将双柱式现浇桥墩和双柱式纯摇摆桥墩作为对比模型,研究附加纯耗能支撑和自复位耗能支撑双柱式摇摆桥墩的滞回性能;分别对这四种桥墩结构进行动力时程分析,探究这四种桥墩在近场对称脉冲、近场非对称脉冲和远场无脉冲地震动作用下的动力响应。研究结果表明:附加支撑的双柱式摇摆桥墩中的墩柱仍具有摇摆机制,可有效避免墩身出现塑性铰发生严重的损伤破坏,同时附加的支撑可以显著提高桥墩的承载能力和耗能能力,有效降低桥墩结构的位移响应,特别是自复位耗能支撑还可额外为桥墩提供自恢复力,有效提高结构的抗震性能。