Al/TiO_(2) SELF-COMBUSTION SYNTHESIS REACTION

Al/TiO_(2) self-combustion synthesis reaction has been studied,including the effect of initial conditions of reactants on combustion temperature,combustion velocity and combustion stability etc.The reaction mechanism of Al/TiO_(2) self-combustion synthesis has been studied emphatically and the dynamic reaction model has been created.

Study on trifluoromethanesulfonic acid-promoted synthesis of daidzein: Process optimization and reaction mechanism

Daidzein has been widely used in pharmaceuticals,nutraceuticals,cosmetics,feed additives,etc.Its preparation process and related reaction mechanism need to be further investigated.A cost-effective process for synthesizing daidzein was developed in this work.In this article,a two-step synthesis of daidzein(Friedel–Crafts acylation and[5+1]cyclization)was developed via the employment of trifluoromethanesulfonic acid(TfOH)as an effective promoting reagent.The effect of reaction conditions such as solvent,the amount of TfOH,reaction temperature,and reactant ratio on the conversion rate and the yield of the reaction,respectively,was systematically investigated,and daidzein was obtained in 74.0%isolated yield under optimal conditions.Due to the facilitating effect of TfOH,the Friedel–Crafts acylation was completed within 10 min at 90℃ and the[5+1]cyclization was completed within 180 min at 25℃.In addition,a possible reaction mechanism for this process was proposed.The results of the study may provide useful guidance for industrial production of daidzein on a large scale.

Exploring nitrogen reduction reaction mechanisms in electrocatalytic ammonia synthesis:A comprehensive review

The electrochemical nitrogen reduction reaction(eNRR)holds significant promise as a sustainable alternative to the conventional large-scale Haber Bosch process,offering a carbon footprint-free approach for ammonia synthesis.While the process is thermodynamically feasible at ambient temperature and pressure,challenges such as the competing hydrogen evolution reaction,low nitrogen solubility in electrolytes,and the activation of inert dinitrogen(N_(2))gas adversely affect the performance of ammonia production.These hurdles result in low Faradaic efficiency and low ammonia production rate,which pose obstacles to the commercialisation of the process.Researchers have been actively designing and proposing various electrocatalysts to address these issues,but challenges still need to be resolved.A key strategy in electrocatalyst design lies in understanding the underlying mechanisms that govern the success or failure of the electrocatalyst in driving the electrochemical reaction.Through mechanistic studies,we gain valuable insights into the factors affecting the reaction,enabling us to propose optimised designs to overcome the barriers.This review aims to provide a comprehensive understanding of the various mechanisms involved in eNRR on the electrocatalyst surface.It delves into the various mechanisms such as dissociative,associative,Mars-van Krevelen,lithium-mediated nitrogen reduction and surface hydrogenation mechanisms of nitrogen reduction.By unravelling the intricacies of eNRR mechanisms and exploring promising avenues,we can pave the way for more efficient and commercially viable ammonia synthesis through this sustainable electrochemical process by designing an efficient electrocatalyst.

Efficient Solvothermal Synthesis of Defect-Rich Cu-BTC•MOF with Enhanced Electrocatalytic Activity in Alkaline Hydrogen Evolution Reaction

Porous metal–organic frameworks(MOFs)have been recently discovered to be effi cient catalysts for energy applications and green technologies.Here,we report on a scalable catalytic platform using Cu-based MOFs for electrocatalytic alkaline hydrogen evolution reaction.First,the solvothermal synthesis of Cu-BTC MOFs(BTC=1,3,5-benzenetricarboxylate)at 85°C and a 1:60 ligand-to-solvent ratio allowed for minimizing the chemical consumption.Second,the obtained platform demonstrated enhanced electrochemical performance compared with commercially available Cu-based MOFs,with a potential of-230 versus-232 eV,logarithm of the current density of-3.6 versus-4.2 cm 2,and electrochemical surface area of 75 versus 25 cm 2 per cm 2 of geometric area,respectively.Morphological and Raman analyses also revealed that the high concentration of defects in the obtained submicron Cu-BTC MOFs can contribute to their improved catalytic performance.Thus,our fi ndings pave the way to the low-cost synthesis of energy-effi cient MOF-based catalysts for hydrogen production.

Microwave direct synthesis and thermoelectric properties of Mg_(2)Si by solid-state reaction

In order to reduce the oxidation and volatilization caused by Mg element in the traditional methods for synthesizing Mg2Si compounds,Mg2Si thermoelectric materials were prepared by solid state reaction and microwave radiation techniques.Structure and phase composition of the materials were investigated by X-ray diffraction.The electrical conductivity,Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 700 K.It is found that high purity Mg2Si powders can be obtained with excessive content of 8% Mg from the stoichiometric Mg2Si at 853 K and 2.5 kW for 30 min.A maximum dimensionless figure of merit,ZT,of about 0.13 was obtained for Mg2Si at 600 K.

Optimization of reaction for synthesis of polyisobutylene amine between amination agent and epoxy polyisobutylene

An optimization study on the amination reaction of epoxy polyisobutylene for synthesis of polyisobutylene amine is presented. The experimental results indicate that n-butanol and ethylenediamine are the suitable solvent and amination agents for the reaction, respectively. The reaction yield of the amination reaction is notably increased with the enhanced molar ratio of either n-butanol against epoxy polyisobutylene or ethylenediamine against epoxy polyisobutylene. Also, the yield is enhanced with increasing temperature and time during the experimental range. Strikingly, the yield reaches as high as 91. 30% under optimal conditions; with the molar ratio of ethylenediamine, n-butanol and PIBO of 10∶ 6∶ 1, the reaction temperature of 150 ℃ and the reaction time of 6 h. In addition, the yield of the reaction is slightly decreased with the enhanced water content of the system. Accordingly, the mass concentration of water should be controlled within 1. 7% during the reaction.

Precisely Controlled Synthesis of Pt-Pd Octahedral Nanoframes as a Superior Catalyst towards Oxygen Reduction Reaction

Pt-based nanoframes represent a class of promising catalysts towards oxygen reduction reaction. Herein, we, for the first time, successfully prepared Pt-Pd octahedral nanoframes with ultrathin ridges less than 2 nm in thickness. The Pt-Pd octahedral nanoframes were obtained through site-selected deposition of Pt atoms onto the edge sites of Pd octahedral seeds, followed by selective removal of the Pd octahedral cores via chemical etching. Due to that a combination of three-dimensional opens geometrical structure and Pt-skin surface compositional structure, the Pt-Pd octahedral nanoframes/C catalyst shows a mass activity of 1.15 A/mgPt towards oxygen reduction reaction, 5.8 times enhancement in mass activity relative to commercial Pt/C catalyst （0.20 A/mgPt）. Moreover, even after 8000 cycles of accelerated durability test, the Pt-Pd octahedral nanoframes/C catalyst still exhibits a mass activity which is more than three times higher than that of pristine Pt/C catalyst.

Reaction Mechanism,Synthesis and Characterization of Urea-glyoxal(UG) Resin

The reaction mechanism of glyoxal （G） with urea （U） under weak acid condition was theoretically investigated at PW91/DNP/COSMO of quantum chemistry using density functional theory （DFT） method. The results show that the addition reaction of G with U under the conditions mainly involves the reactions of U with protonated glyoxal （p-G）, protonated 2,2-dihy- droxyacetaldehyde （p-G 1） and protonated bis-hemdiol （p-G2） to form two important carbocation reactive intermediates of C-p-UG and C-p-UG1, and two important hydroxyl compounds of UG and UG1. These compounds play important roles in the formation of UG resin. According to the result of quantum chemical calculation, UG resin was synthesized successfully under weak acid conditions. The UG resin was characterized by matrix assisted laser desorption ionization time of flight mass spectrometry （MALDI-TOF-MS）, ultraviolet and visible spectroscopy （UV-vis）, Fourier transform infrared spectroscopy （FT1R） and nuclear magnetic resonance spectroscopy （13CNMR and 1HNMR）. These instrumental analytical results agree with each other and further confirm the addition reaction pathway of glyoxal with urea proposed by quantum chemical calculation.

Kinetics of synthesis of Li_4Ti_5O_(12) through solid-solid reaction

Sohd-solid reaction under low heat or low temperature is an approach to synthesize various kinds of materials that were widely used in electrochemistry field. In this paper a theoretical treatment has been presented for analyzing the mechanism of sohd-solid reaction and deriving a series of formulae to describe the variation and rate of reactions. This new model has been used in the manufacturing of spinel Li4Ti5O12. The results show that this new model works very well and will play a useful role for guiding the manufacturing of electrochemical materials.

Ultrasonicwave-assisted tandem-reaction for synthesis of symmetrical vicinal diamines

A practical synthesis of symmetrical vicinal diamines with broad chemistry scope is described. The key step is the ultrasonicwave promoted tandem-reaction, two-step reaction sequence combining Mannich double condensations with benzo- triazole, glyoxal and primary or secondary amines and reduction of the bis（benzotriazole）-adducts with sodium borohydride proceeded smoothly in tetrahydrofuran in high yield at room temperature.

Synthesis methods and powder quality of titanium monocarbide

Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its realization.Herein,the methods for synthesizing TiC powders based on a reaction system are reviewed.This analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of powders.Notably,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer processes.Furthermore,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.

Kinetics of the water-gas shift reaction in Fischer-Tropsch synthesis over a nano-structured iron catalyst

Based on formate and direct oxidation mechanisms,three Langmuir-Hinshelwood-Hougen-Watson （LHHW） kinetic models of the water-gasshift （WGS） reaction over a nano-structured iron catalyst under Fischer-Tropsch synthesis （FTS） reaction conditions were derived and compared with those over the conventional catalyst.The conventional and nanostructured Fe/Cu/La/Si catalysts were prepared by co-precipitation of Fe and Cu nitrates in aqueous media and water-oil micro-emulsion,respectively.The WGS kinetic data were measured by experiments over a wide range of reaction conditions and comparisons were also made for various rate equations.WGS rate expressions based on the formate mechanism with the assumption that the formation of formate is rate determining step were found to be the best.

MICROSTRUCTURE AND PROPERTY OF Al/TiC COMPOSITES PREPARED BY REACTION SYNTHESIS

A novel in-situ process-Reaction Synthesis has been used to fabricate Al/TiC compos-ites,the phase constitute,microstructure and mechanical property of the Al/TiC composite have been investigated by the use of XRD and SEM.It has been shown that the reaction synthesized TiC particu-late is submicron in size(about 0.1~0.8μpm),spherical in shape and smooth in surface.In macrostruc-ture the distribution of the TiC particulate in matrix is homogeneous,but in micostructure there is micro-segregation of the TiC particulate at the intergrannular.The cast structure become fine because of the existence of the TiC particulate.In addition«with the increasing of weight percentage of TiC partic-ulate in alloy,the yield strength and ultimate tensile strength of the composite increase significantly«e.g.at 15%TiC,117% and 103% increase respectively,in the same time the elongation of the composite is still more than 4.5%.In the end,the analysis has been done by SEM on the fracture morphology of the composite.The results show that the fracture is ductility,and mainly because of the cluster of TiC particulate to intergrannular and the synthesis of bar morphology Al_(3)Ti.

Asymmetric Pictet-Spengler Reactions:Synthesis of Tetrahydroisoquinoline Derivatives from L-DOPA

The cis-l-substituted-6,7-dihydroxy-l,2,3,4-tetrahydroisoquinoline-3-carboxylic acid esters 3 can be obtained in a highly diastereoselective fashion through 1,3-induction Pictet- Spengler (P-S) cyclization of the L-DOPA (3,4-dihydroxyphenylalanine) methyl ester with aromatic or aliphatic aldehydes under acidic conditions. Their epimers 4 are also obtained as minor products.

Electrochemical synthesis of trimetallic nickel-iron-copper nanoparticles via potential-cycling for high current density anion exchange membrane water-splitting applications

Hydrogen is known for its elevated energy density and environmental compatibility and is a promising alternative to fossil fuels.Alkaline water electrolysis utilizing renewable energy sources has emerged as a means to obtain high-purity hydrogen.Nevertheless,electrocatalysts used in the process are fabricated using conventional wet chemical synthesis methods,such as sol-gel,hydrothermal,or surfactantassisted approaches,which often necessitate intricate pretreatment procedures and are vulnerable to post-treatment contamination.Therefore,this study introduces a streamlined and environmentally conscious one-step potential-cycling approach to generate a highly efficient trimetallic nickel-iron-copper electrocatalyst in situ on nickel foam.The synthesized material exhibited remarkable performance,requiring a mere 476 mV to drive electrochemical water splitting at 100 mA cm^(-2)current density in alkaline solution.Furthermore,this material was integrated into an anion exchange membrane watersplitting device and achieved an exceptionally high current density of 1 A cm^(-2)at a low cell voltage of2.13 V,outperforming the noble-metal benchmark(2.51 V).Additionally,ex situ characterizations were employed to detect transformations in the active sites during the catalytic process,revealing the structural transformations and providing inspiration for further design of electrocatalysts.

Solid-phase Synthesis of PNA Monomer by Ugi Four-component Condensation Reaction

Peptide nucleic acids (PNA) oligomers were synthesized in most cases by peptide synthesis from N-protected monomers. In this work a new method of obtaining PNA monomer by Ugi four-component condensation reaction was tested by solid-phase synthesis. The Fmoc protected PNA monomer was build up with thymin-1-yl acetic acid, 3-methylbutyl aldehyde, Fmoc protected aminoethyl isocyanide and Gly-Wang resin.

Synthesis of NO by rotating sliding arc discharge reactor with conical-spiral electrodes

The present work investigates the potential applications of nitrogen oxides(NO_(x)),particularly nitric oxide(NO)and nitrogen dioxide(NO_(2)),generated through discharge plasma in diverse sectors such as medicine,nitrogen fixation,energy,and environmental protection.In this study,a rotating sliding arc discharge reactor was initially employed to produce high concentrations of gaseous NO_(x),followed by the utilization of a molybdenum wire redox reactor for NO_(2)-to-NO conversion.The outcomes reveal that the discharge states and generations of NO_(x) are affected by varying parameters,including the applied energies,frequencies and airflow states(1.3-2.6 m/s are the laminar flow,2.6-5.2 m/s are the transition state,5.2-6.5 m/s are the turbulent flow),and the concentrations of NO_(x) within the arc discharge are higher than that in the spark discharge.Moreover,the concentrations of NO,NO_(2) and NO_(x) gradually increased,and the concentration ratios of NO/NO_(2) and NO_(x)/NO_(2) decreased with increasing the applied energy for one cycle from 14.8 mJ to 24.3 mJ.Meanwhile,the concentrations of NO,NO_(2) and NO_(x) gradually decreased,and the concentration ratios of NO/NO_(2) and NO_(x)/NO_(2) first decreased and then increased with increasing the applied frequencies from 5.0 kHz to 9.0 kHz.Further,the concentrations of NO,NO_(2) and NO_(x) gradually decreased,and the concentration ratios of NO/NO_(2) and NO_(x)/NO_(2) first increased and then decreased with increasing the air flow speeds from 1.3 m/s to 6.5 m/s.Lastly,the concentrations of NO increased and NO_(2) decreased with increasing temperature from 25℃ to 400℃ using molybdenum converted.These findings provide experimental support for the application of plasma in the fields of medicine,nitrogen fixation,energy and environmental protection.

Porous TiFe_(2) intermetallic compound fabricated via elemental powder reactive synthesis

Porous intermetallics show potential in the field of filtration and separation as well as in the field of catalysis.Herein,porous Ti Fe2intermetallics were fabricated by the reactive synthesis of elemental powders.The phase transformation and pore formation of porous TiFe2intermetallics were investigated,and its corrosion behavior and hydrogen evolution reaction(HER)performance in alkali solution were studied.Porous TiFe2intermetallics with porosity in the range of 34.4%-56.4%were synthesized by the diffusion reaction of Ti and Fe elements,and the pore formation of porous TiFe2intermetallic compound is the result of a combination of the bridging effect and the Kirkendall effect.The porous TiFe2samples exhibit better corrosion resistance compared with porous 316L stainless steel,which is related to the formation of uniform nanosheets on the surface that hinder further corrosion,and porous TiFe2electrode shows the overpotential of 220.6 and 295.6 mV at 10 and 100 mA·cm-2,suggesting a good catalytic performance.The synthesized porous Fe-based intermetallic has a controllable pore structure as well as excellent corrosion resistance,showing its potential in the field of filtration and separation.

Atomically Adjustable Rhodium Catalyst Synthesis with Outstanding Mass Activity via Surface-Li mi ted Cation Exchange

Rh has been widely studied as a catalyst for the promising hydrazine oxidation reaction that can replace oxygen evolution reactions for boosting hydrogen production from hydrazine-containing wastewater.Despite Rh being expensive,only a few studies have examined its electrocatalytic mass activity.Herein,surface-limited cation exchange and electrochemical activation processes are designed to remarkably enhance the mass activity of Rh.Rh atoms were readily replaced at the Ni sites on the surface of NiOOH electrodes by cation exchange,and the resulting RhOOH compounds were activated by the electrochemical reduction process.The cation exchange-derived Rh catalysts exhibited particle sizes not exceeding 2 nm without agglomeration,indicating a decrease in the number of inactive inner Rh atoms.Consequently,an improved mass activity of 30 A mg_(Rh)^(-1)was achieved at 0.4 V versus reversible hydrogen electrode.Furthermore,the two-electrode system employing the same CE-derived Rh electrodes achieved overall hydrazine splitting over 36 h at a stable low voltage.The proposed surface-limited CE process is an effective method for reducing inactive atoms of expensive noble metal catalysts.

Reaction dynamics in the combustion synthesis system of Al-CrO_3-Al_2O_3-NaF-N_2-O_2

A new material with heat-resistant and adiabatic characteristics and high strength was prepared using the combustion synthesis method by mixed powders of CrO3, Al, Al2O3, and NaF in atmospheric gas. The reaction dynamic process of the Al-CrO3-NaF-Al2O3-N2-O2 new material system by the combustion synthesis method was discussed based on the observation results by SEM, EDS, and XRD in combination with the combustion front quenching method （CFQM） and the relation curves between reaction free enthalpies and the corresponding temperatures. The combustion synthesis mechanism and the formation reasons of the phase in the combustion product were analyzed.