Bimolecular Self-Condensation of Pyrrolizinones Induced byGrignard Reagent

The products of pyrrolizinones with 3-methoxyphenyl magnesium bromide were bimolecular condensation compounds, not the related alcohol, and they were confirmed by IR, H-1-NMR, C-13-NMR. HMQC, HMBC. NOE-differ., MS and Elemental Anal.. This indicated that Grignard reagent is a catalyst here.

Studies on the Self-condensing Vinyl Polymerization of a Novel Maleimide Inimer

The self-condensing vinyl polymerization(SCVP) of a novel maleimide inimer(initiator-monomer) 1, N-(4-α-bromobutyryloxy phenyl) maleimide with the complex of CuBr/Bipy(2, 2′-bipyridine) as the catalyst was studied. GPC was used to determine the molecular weight and the results show that the molecular weight increases exponentially with polymerization time during the first hour, and then the rate of increase molecular weight slows down. The molecular weight also increases with increasing dosage of the catalyst. The coincidence of the molecular weights determined by 1H NMR and GPC proves that the polymer obtained from the SCVP of inimer 1 has a linear structure, which is further verified by 13C NMR spectrum. A hyperbranched polymer was obtained by the copolymerization of inimer 1 and styrene.

Studies on the Self-condensing Vinyl Living Radical Polymerization of a Novel Acrylate Inimer

A novel acrylate inimer, 2-（2-chloroacetyloxy） ethyl acrylate, was prepared by the reaction of 2-hydroxyethyl acrylate with chloroacetyl chloride in the presence of triethylamine. The self-condensing vinyl living radical polymerization of the inimer was studied and the hyperbranched macromolecules containing ester linkages on their backbone were prepared. All the polymerization products were characterized by 1H NMR. The polymerization degree and the branching parameter were calculated based on the 1H NMR spectra. It has been shown that this inimer exhibits a very distinctive polymerization behavior. Similar to step-growth polymerization, the polymerization degree of the products formed increased exponentially during the early stage of the polymerization, and then the increasing rate slowed down. However, the inimer remained present throughout the polymerization consistent with conventional free radical polymerization. Also, if much longer polymerization time was used, the polymerization system would become gel due to the crosslinking reaction derived from radical-radical recombination. As a result of the unequal reactivity of -CH2Cl and >CHCl, an almost linear product was obtained at a molar ratio of bipy to inimer=0.05, while a relatively high ratio of bipy to inimer 1 favored the formation of the branched structure. The macromolecules formed at a high ratio of bipy to inimer 1 exhibited an excellent solubility in organic solvents such as acetone.

Synthesis of Highly Branched Poly(ε-caprolactone) by Self-condensing Atom Transfer Radical Polymerization of Macroinimers

Branched poly（ε-capmlactone） was synthesized by self-condensing atom transfer radical polymerization of macroinimer, α-acryloyoxy-ω-2-bromopropionyloxy poly（ε-caprolactone）, which was prepared by enzyme-catalyzed ring-opening polymerization of ε-caprolactone with 2-hydroxylethyl acrylate as initiator and esterification of the ω-hydroxyl group of the obtained poly（ε-caprolactone） by 2-bromopropionyl bromide.

Heat Recuperation for the Self-Condensing CO_(2)Transcritical Power Cycle

The supercritical CO_(2)Brayton cycle has potential to be used in electricity generation occasions with its advantages of high efficiency and compact structure.Focusing on a so-called self-condensing CO_(2)transcritical power cycle,a model was established and four different layouts of heat recuperation process were analyzed,a without-recuperation cycle,a post-recuperation cycle,a pre-recuperation cycle and a re-recuperation cycle.The results showed that the internal normal cycle's share of the whole cycle increases with increasing the cooling pressure and decreasing the final cooled temperature.Heat load in the supercritical heater decreases with increasing the cooling pressure.From perspective of performance,the re-recuperation cycle and the pre-recuperation cycle have similar thermal efficiency which is much higher than other two layouts.Both thermal efficiency and net power output have a maximum value with the cooling pressure,except in the condition with the final cooled temperature of 31℃.Considering both the complexity and the economy,the pre-recuperation cycle is more applicable than the other options.Under 35℃of the final cooled temperature,the thermal efficiency of the pre-recuperation cycle reaches the peak 0.34 with the cooling pressure of 8.4 MPa and the maximum net power output is 2355.24 kW at 8.2 MPa of the cooling pressure.

Kinetic theory of self-condensing vinyl polymerization

This review introduces the kinetic theory of self-condensing vinyl polymerization (SCVP),including the SCVP of AB inimers,the SCVP with non-equal reactivity between A and B groups,the SCVP in the presence of a small amount of multifunctional initiators,also the SCVP of both inimers and comonomers.The analytical expressions of various molecular parameters for the resulting hyperbranched polymers,such as the molecular size distribution function,the average molecular weight,the polydispersity index and the degree of branching,are reviewed systematically.

Statistical and thermodynamic properties of binary self-condensing vinyl polymerization

The thermodynamic properties of a binary self-condensing vinyl polymerization system consisting of monomers and inimers are investigated by the principle of statistical mechanics.In detail,in terms of two types of canonical partition functions constructed from different viewpoints,the equilibrium free energy,the law of mass action and the size distribution of hyperbranched polymers are obtained.As an application,the specific heat,equation of state and isothermal compressibility concerning the polymerization are given as well.To study the dimension of hyperbranched polymers in the system,a recursion formula satisfied by the(k+1)-th and k-th mean square radius of gyration is derived,and then the first,second and third radius of gyration under different solvent conditions are presented.The influences of the fraction of inimers,the conversion of vinyl groups and the solvent effect on the average dimension of hyperbranched polymers are discussed.

A SYNTHETIC APPROACH FOR WATER SOLUBLE HYPERBRANCHED POLY(N,N-ETHYLIDENEBIS(N-2-CHLOROACETYL ACRYLAMIDE)) WITH HIGH DEGREE OF BRANCHING VIA ATOM TRANSFER RADICAL POLYMERIZATION/SELF-CONDENSING VINYL POLYMERIZATION

A novel acrylamide A2B2＊ （A = alkene, B＊ = alkyl chlorine） type inimer was obtained from commercially available 1,2-ethylenediamine, chloroacetyl chloride and acryloyl chloride. The as-prepared monomer can form water-soluble hyperbranched poly（N,N-ethylidene bis（N-2-chloroacetyl acrylamide））s （HPECA） through atom transfer radical polymerization/self-condensing vinyl polymerization method in the presence alkyl chlorine/CuCl/2,2-bipyridine activation system which can effectively suppress the gelation formation.1H-NMR spectra and dual detector size exclusion chromatography proved the hyperbranched structure indisputably, and the degree of branching was determined by the detailed analyses of 1H-NMR spectra. The trend of the degree of branching was in consistent with the result of Mark- Houwink exponent a. The experiment results suggested that the conversion was 67%, Mw = 13.2 x 104, Mark-Houwink a = 0.282 and the degree of branching = 64% when the reaction temperature was 120 ℃, reaction time = 168 h and N,N- ethylidene bis（N-2-chloroacetyl acrylamide）：Cu（I） = 50：0.62.

A Unified Theoretical Treatment on Statistical Properties of the Semi-batch Self-condensing Vinyl Polymerization System

We present a novel generating function(GF)method for the self-condensing vinyl polymerization(SCVP)system with any initial distribution of preexisted polymers.Such a method was proven to be especially useful to investigate the semi-batch SCVP system allowing a sequence of feeding operations during the polymerization.Consequently,the number-,weight-,and z-average molecular weights as well as dispersity index of hyperbranched polymers can be explicitly given,which are determined by predetermined feeding details and conversions in each polymerization step.These analytical results are further confirmed by the corresponding Monte Carlo simulations.Therefore,the present GF method has provided a unified treatment to the semi-batch SCVP system.Accordingly,hyperbranched polymers with desired properties can be prepared by designing feeding details and presetting conversions at each step based on the present GF method.