Impact frequency variation of self-excited oscillation pulsed supercritical carbon dioxide jets

In order to obtain the impact frequency of resonant coal breaking by self-excited oscillation pulsed supercritical carbon dioxide(SC-CO_(2))jet,large eddy simulation was used to analyze the formation and development process of self-excited oscillation pulsed SC-CO_(2)jet,the variation of jet impact frequency in the nozzle and the free flow field,and the variation of jet impact frequency at different positions in the jet axis and under different cavity lengths.The test device of jet impact frequency was developed,and experiments were performed to verify the conclusions of the numerical simulations.The results show that the frequency of the self-excited oscillation pulsed SC-CO_(2)jet is different in the nozzle and the free flow field.In the nozzle,the frequency generated by the fluid disturbance is the same,and the jet frequency at the exit of the nozzle is consistent with that inside the nozzle.In the free flow field,due to the compressibility of CO_(2),the pressure,velocity and other parameters of SC-CO_(2)jets have obvious fluctuation patterns.This feature causes the impact frequency of the self-excited oscillation pulsed SC-CO_(2)jet to decrease gradually in the axis.Changing the cavity length allows the adjustment of the jet impact frequency in the free flow field by affecting the disturbance frequency of the self-excited oscillation pulsed SC-CO_(2)jet inside the nozzle.

Experimental and Numerical Evaluation of the Cavitation Performances of Self-Excited Oscillating Jets

Self-excited oscillating jets(SOJ)are used in several practical applications.Their performances are significantly affected by structural parameters and the target distance.In this study,a geometric model of the SOJ nozzle accounting for multiple structural parameters is introduced,then the related cavitation performances and the optimal target distance are investigated using a Large-Eddy Simulation(LES)approach.Results are also provided about an experiment,which was conducted to validate the simulation results.By analyzing the evolution of the vapor volume fraction at the nozzle outlet,a discussion is presented about the effect of the aforementioned structural parameters on the cavitation performances and the target distance.It is shown that the distribution of cavitation clouds at the outlet of the SOJ nozzle displays a non-monotonic trend(first increasing,then decreasing).Under working conditions with an inlet pressure of 4 MPa,a SOJ nozzle outlet/inlet diameter ratio(D_(1)/D_(2))of 1.2,and a chamber diameter ratio(D/L)close to 1.8,the nozzle outlet cavitation performance attains a maximum.The optimal structural parameters correspond to the optimal target distance,which is near 50 mm.The experiments have revealed that the SOJ nozzle with the above parameters displays a good cavitation erosion effect at the target distance of 50 mm,in satisfactory agreement with the numerical simulation results.

THEORY AND EXPERIMENTAL STUDY OF THE SELF-EXCITED OSCILLATION PULSED JET NOZZLE

Comparing with usual continuous jet nozzle, the self-excited oscillationpulsed jet nozzle SEOPJN) can make jet generate a higher peak of pressure and larger scouringvolume. And it can make jet increase the effective standoff distance, too. The basic theories of theSEOPJN are introduced. Some experimental results are shown. According to the results, using tricornbits assembled the SEOPJN to drill oil well, the ROP increases by 8 percent approx 77 percent, andthe rates of the footage for tricorn bit increases by 6.7 percent approx 44.0 percent.

The Theory and Experimental Study of the Self-Excited Oscillation Pulsed Jet Nozzle (Pipeline Pulsed Flow Generator)

In this paper, the basic theories of the Self-excited Oscillation Pulsed Jet Nozzle (SEOPJN) invented by the authors are introduced. Then, some experimental results are shown. According to the results, using tricorn bits assembled the SEOPJN to drill oil well, the rate of penetration (ROP) increases by 8% - 77%, and the rate of the footage for tricorn bit increases by 6.7% - 44%. Although the test was conducted in the water, good result was got in nature gas transportation. The volume of gas transportation could be increased by the Self-excited Oscillation Pulsed generator while the gas pressure drop could be decreased, since it significantly reduced the pressure loss during gas transportation.

Evolution of ionization waves in a multi-pulsed plasma jet:the role of memory charges

In this paper,we discuss the properties of ionization waves(IWs)in a multi-pulsed plasma jet while using the two-dimensional computational approach.The IWs are generated by application of three short negative pulses with a repetition frequency 12.5 MHz.The simulations are performed continuously during a single run while accounting for charges accumulated inside(surface charges)and outside(space charges)the tube.The plasma forming gas mixture(He/O2=99.8%/0.2%)is injected through the discharge tube into the surrounding humid air.We show that an IW can emerge from the tube exit at a pulse rising edge(as a negative IW)and at a falling edge of the same pulse(as a positive IW).It is demonstrated that remnants of the negative and positive charges play an essential role in the discharge evolution.The first pulse travels the shortest distance as it propagates through the initially non-ionized environment.The IWs developing during the second pulse essentially enlarge the plasma plume length.At the same time,the IWs generated by the third pulse eventually decay due to the remnants of charges accumulated during the previous pulses.Accumulated memory charges can lead to the IW extinction.

Generalized equation for calculating rock cutting efficiency by pulsed water jets

One of the promising methods for rock cutting technology is the use of high-speed water jets.In order to improve the cutting capacity of water jets without increasing the hydraulic power of equipment,pulsed water jets are basically used to increase the rock cutting efficiency.However,there are no mature recommendations for selection of rational parameters,and the relationship between indicators of rock cutting efficiency and parameters of pulsed water jet is still not established.In this context,we aimed at developing a generalized equation for calculating rock cutting efficiency,in which all the major parameters in consideration of rock cutting process are included.Then,a calibration of the rational parameters of rock cutting by pulsed water jets was conducted.The results are likely helpful for increasing productivity and reducing energy consumption.

Influence of the pulse polarity on micro-hollow cathode helium plasma jet

Helium plasma jets generated by micro-hollow cathode discharge(MHCD) with the squarewave power source of different polarities are investigated in this work. The effects of positive and negative polarity pulses on the MHCD and plasma jet were compared, and the time-resolved optical emission spectra of excited species(N_(2)^(+) and O) were studied. The results confirm that the electric field is a key factor for the propagation of the jet during the rising edge of the positive current pulse, while the gas expansion is mainly important for the jet propagation during the current stable phase. The time-resolved spectra show that the generation of specie O in the jetdriven by the electric field is more efficient.

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.

Characteristic plume morphologies of atmospheric Ar and He plasma jets excited by a pulsed microwave hairpin resonator

Different discharge morphologies in atmospheric Ar and He plasmas are excited by using a pulsed microwave hairpin resonator.Ar plasmas form an arched plasma plume at the opened end of the hairpin,whereas He plumes generate only a contracted plasmas in between both tips of metal electrodes.Despite this different point,their discharge processes have three similar characteristics:(i)the ionization occurs at the main electrode firstly and then develops to the slave electrode,(ii)during the shrinking stage the middle domain of the discharge channels disappears at last,and(iii)even at zero power input(in between pulses)a weak light region always exists in the discharge channels.Both experimental results and electromagnetic simulations suggest that the discharge is resonantly excited by the local enhanced electric fields.In addition,Ar ionization and excitation energies are lower than those of He,the effect of Ar gas flow is far greater than that of He gas,and the contribution of accelerated electrons only locates at the domain with the strongest electric fields.These reasons could be used to interpret the different characteristic plume morphologies of the proposed atmospheric Ar and He plasmas.

Dynamic effects of high-pressure pulsed water jet in low-permeability coal seams

Mine gas extraction in China is difficult due to the characteristics such as micro-porosity,low-permeability and high adsorption of coal seams.The pulsed mechanismof a high-pressure pulsed water jet was studied through theoretical analysis,experimentand field measurement.The results show that high-pressure pulsed water jet has threedynamic properties.What's more,the three dynamic effects can be found in low-permeabilitycoal seams.A new pulsed water jet with 200-1 000 Hz oscillation frequency andpeak pressure 2.5 times than average pressure was introduced.During bubble collapsing,sound vibration and instantaneous high pressures over 100 MPa enhanced the cuttingability of the high-pressure jet.Through high-pressure pulsed water jet drilling and slotting,the exposure area of coal bodies was greatly enlarged and pressure of the coal seamsrapidly decreased.Therefore,the permeability of coal seams was improved and gas absorptionrate also decreased.Application results show that gas adsorption rate decreasedby 30%-40%and the penetrability coefficient increased 100 times.This proves that high-pressurepulsed water is more efficient than other conventional methods.

Study of the expansion characteristics of a pulsed plasma jet in air

In the background of electrothermal-chemical （ETC） emission,an investigation has been conducted on the characteristics of a freely expanding pulsed plasma jet in air.The evolutionary process of the plasma jet is experimentally investigated using a piezoelectric pressure sensor and a digital high-speed video system.The variation relation in the extended volume,axial displacement and radial displacement of the pulsed plasma jet in atmosphere with time under different discharge voltages and jet breaking pressures is obtained.Based on experiments,a two-dimensional axisymmetric unsteady model is established to analyze the characteristics of the two-phase interface and the variation of flow-field parameters resulting from a pulsed plasma jet into air at a pressure of 1.5-3.5 MPa under three nozzle diameters （3 mm,4 mm and 5 ram,respectively）.The images of the plasma jet reveal a changing shape process,from a quasiellipsoid to a conical head and an elongated cylindrical tail.The axial displacement of the jet is always larger than that along the radial direction.The extended volume reveals a single peak distribution with time.Compared to the experiment,the numerical simulation agrees well with the experimental data.The parameters of the jet field mutate at the nozzle exit with a decrease in the parameter pulse near the nozzle,and become more and more gradual and close to environmental parameters.Increasing the injection pressure and nozzle diameter can increase the parameters of the flow field such as the expansion volume of the pulsed plasma jet,the size of the Mach disk and the pressure.In addition,the turbulent mixing in the expansion process is also enhanced.

Formation Principle and Characteristics of Self‑Supercharging Pulsed Water Jet

High-pressure pulsed water jet technology has considerable development potential in the field of rock fragmentation.To overcome the shortcomings of existing pulsed jets,a self-supercharging pulsed water jet(SSPWJ)generation method is proposed,which is based on the theory of the pulsed water jet and the principle of hydraulic boosting.The proposed method changes the flow direction of the fluid medium through the valve core to make the piston reciprocate in the cylinder and relies on the effective area difference between the front and rear chambers in the stroke stage of the piston to realize the organic combination of“pulse”and“supercharging”of the jet,thus forming an SSPWJ.On the basis of the formation principle of the SSPWJ,a SSPWJ testing platform was constructed,and tests were performed on the jet pressure acquisition,morphology capture,and granite erosion.Both the jet pressure and the jet morphology exhibited periodic changes,and a higher pulse pressure was obtained at lower inlet pressure.The error of the pressure ratio calculated according to the experimental results was<3%relative to the theoretical design value,confirming the feasibility of the method.The pulse pressure and pulse frequency are controllable;that is,as the inlet flow rate increases in the stroke stage of the piston,the pulse pressure and pulse frequency increase,and the pulse duration decreases.As the inlet flow rate increases in the backward-stroke stage of the piston,the pulse frequency increases,and the pulse pressure and pulse duration remain unchanged.Under the combined action of the waterhammer pressure,high-speed lateral flow,and high-frequency dynamic load of the SSPWJ,local flaky exfoliation was observed when the granite surface was eroded.The results of this study lay the foundation for enriching the theory of pulsed jet generation and expanding its application range.

Study of the influence of discharge loop parameters on anode side on generation characteristics of metal plasma jet in a pulsed vacuum discharge

In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance on the anode side on the discharge characteristics and the generation characteristics of plasma jet are investigated.Results show that the existence of a resistor on the anode side can increase the anode potential,thereby preventing charged particles from entering the anode and promoting the ejection of charged particles along the axis of the insulating sleeve nozzle.The application of a capacitor on the anode side can not only absorb electrons at the initial stage of discharge,increasing the peak value of the cathode hump potential,but also prevent charged particles from moving to the anode,thereby improving the ejection performance of the plasma jet.In addition,the use of a larger resistance and a smaller capacitance can improve the blocking effect on charged particles and further improve the ejection performance of the plasma jet.Results of this study will provide a reference for the improvement of the ejection performance of plasma jets and their applications.

Pulsed Gas Jets for Formation of High-Intensity Cluster Beams

The possibility of using of pulsed supersonic gas jets for the formation of high intensity cluster ion beams are discusses. The results of experimental investigations of pulsed gases expansion are generalized in terms of dimensionless similarity parameters. The results of the experimental study of formation of an high-intensity cluster beam of argon are presented. The fundamental phenomenon influences on the main parameters of cluster beam (cluster size, intensity ect.) are considered.

Influence of high-voltage pulse parameters on the propagation of a plasma synthetic jet

In this work, a typical pin-to-pin plasma synthetic jet in static air is excited by a pulsed DC power supply. The influences of the pulse rising time, the amplitude and the repetition frequency of the pulse voltage on the jet flow have been investigated. First, using a high-speed Schlieren imaging technique, the induced shock waves and the fast jet flow generated by the plasma synthetic jet are characterized. With a deposited energy of 44 m J per pulse, the velocity of the shock wave and the maximum velocity of the jet flow reach 320 m s-1 and 100 m s-1,respectively. Second, when the applied voltage increases from 12.8 kV to 16 kV, the maximum jet velocity increases from 66 m s-1 to 93 m s-1. On the other hand, as the pulse rising time varies from 50 ns to 500 ns, or the pulse repetition frequency increases from 5 Hz to 40 Hz, the jet velocity induced by the plasma synthetic jet is weakly dependent. In addition, a comparative study of the plasma synthetic jets using three commercial pulsed power supplies(XJ-15, NPG-18, and PG-30) is implemented. It reveals that the maximum jet velocity of 120 m s-1 is obtained in the case of PG-30, with the longest pulse rising time and the lowest breakdown voltage, while the maximum velocity of 33 m s-1 is detected in the case of NPG-18, even though it has the shortest pulse rising time and the highest breakdown voltage.

Microstructure and properties of nanocrystalline nickel coatings prepared by pulse jet electrodeposition

The fabrication of nanocrystalline nickel coatings was conducted by pulse jet electrodeposition on the substrate of 45# carbon steel.The effects of average current density on the surface morphology,microstructure,average grain size and microhardness of nickel coatings were investigated by scanning electron microscopy(SEM),X-ray diffractometry(XRD)and microhardness measurement.In addition,the corrosion resistances of coating and substrate were compared.It is revealed that the nickel coatings prepared by pulse jet electrodeposition exhibit a fine-grained structure with a smooth surface and a high density,although some pores and defects are still present in coatings.With the increase of average current density,the average grain size of nickel coatings is reduced at first and then increased.The coating with the optimum compactness,the smallest average grain size(13.7 nm)and the highest microhardness are obtained at current density of 39.8 A/dm2.The corrosion resistance is obviously increased for the coatings prepared by pulse jet electrodeposition;however,the corrosion rate is increased after a certain period due to the penetration of the corrosive media.

Experimental study on jet pulse assembly design and numerical simulation

Jet pulse assembly is one of the main components of jet hydraulic oscillator.The pressure wave characteristics produced by jet pulse assembly have an important influence on the performance of the tool.In this paper,the structure and working principle of jet pulse assembly are studied,the mechanical analysis model of piston rod is established,the dynamic resistance ratio formula of jet pulse assembly is deduced,and the numerical simulation test of 89-mm jet pulse assembly structure parameters is carried out.The results show that the piston rod downward stroke is driven by both the jet element driving force and the throttle plate load driving force,and can stably descend.The driving force of the piston rod upward stroke jet element is opposite to the load acting force of the throttle disc,and the jet driving force needs to be greater than the load resistance of the throttle disc to stably ascend.The dynamic resistance ratio formula is deduced.When the area of the end of the piston rod is reduced,the resistance of the throttle disc is reduced and the jet power is increased,thus solving the problem of insufficient power of the piston rod in the upstroke and ensuring the normal operation of the tool.Ten groups of numerical simulation tests were carried out,and it was found that the pressure amplitude and pressure drop of the tool decreased significantly with the increase of the tool size,and the error between the numerical simulation value and the theoretical calculation value was less than 9%,which verified the correctness of the theory.It is suggested to select tools on site according to the drilling construction situation to ensure the drilling effect.

Properties and testing of a hydraulic pulse jet and its application in offshore drilling

Offshore drilling has attracted more attention than ever before due to the increasing worldwide energy demand especially in China. High cost, long drilling cycles, and low rate of penetration （ROP） represent critical challenges for offshore drilling operations. The hydraulic pulse generator was specifically designed, based on China offshore drilling technologies and parameters, to overcome problems encountered during offshore drilling. Both laboratory and field tests were conducted to collect the characteristics of the hydraulic pulse generator. The relationships between flow rate and pressure amplitude, pressure loss and pulse frequency were obtained, which can be used to optimize operation parameters for hydraulic pulse jet drilling. Meanwhile a bottom hole assembly （BHA） for pulse jet drilling has been designed, combining the hydraulic pulse generator with the conventional BHA, positive displacement motor, and rotary steerable system （RSS） etc. Furthermore, the hydraulic pulse jet technique has been successfully applied in more than 10 offshore wells in China. The depth of the applied wells ranged from 2,000 m to 4,100 m with drilling bit diameters of 311 mm and 216 mm. The field application results showed that hydraulic pulse jet technique was feasible for various bit types and formations, and that ROP could be significantly increased, by more than 25%.

Deposition of SiCxHyOz thin film on epoxy resin by nanosecond pulsed APPJ for improving the surface insulating performance

Non-thermal plasma surface modification for epoxy resin（EP）to improve the insulation properties has wide application prospects in gas insulated switchgear and gas insulatedtransmission line.In this paper,a pulsed Ar dual dielectrics atmospheric-pressure plasma jet（APPJ）was used for Si CxHyOzthin film deposition on EP samples.The film deposition was optimized by varying the treatment time while other parameters were kept at constants（treatment distance：10 mm,precursor flow rate：0.6 l min-（-1）,maximum instantaneous power：3.08 k W and single pulse energy：0.18 m J）.It was found that the maximum value of flashover voltages for negative and positive voltage were improved by 18%and 13%when the deposition time was3 min,respectively.The flashover voltage reduced as treatment time increased.Moreover,all the surface conductivity,surface charge dissipation rate and surface trap level distribution reached an optimal value when thin film deposition time was 3 min.Other measurements,such as atomic force microscopy and scanning electron microscope for EP surface morphology,Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy for EP surface compositions,optical emission spectra for APPJ deposition process were carried out to better understand the deposition processes and mechanisms.The results indicated that the original organic groups（C–H,C–C,C=O,C=C）were gradually replaced by the Si containing inorganic groups（Si–O–Si and Si–OH）.The reduction of C=O in ester group and C=C in p-substituted benzene of the EP samples might be responsible for shallowing the trap level and then enhancing the flashover voltage.However,when the plasma treatment time was longer than 3 min,the significant increase of the surface roughness might increase the trap level depth and then deteriorate the flashover performance.

Ionization process and distinctive characteristic of atmospheric pressure cold plasma jet driven resonantly by microwave pulses

In the present study,a coaxial transmission line resonator is constructed,which is always capable of generating cold microwave plasma jet plumes in ambient air in spite of using argon,nitrogen,or even air,respectively.Although the different kinds of working gas induce the different discharge performance,their ionization processes all indicate that the ionization enhancement has taken place twice in each pulsed periods,and the electron densities measured by the method of microwave Rayleigh scattering are higher than the amplitude order of 10^(18)m^(-3).The tail region of plasma jets all contain a large number of active particles,like NO,O,emitted photons,etc,but without O_(3).The formation mechanism and the distinctive characteristics are attributed to the resonance excitation of the locally enhanced electric fields,the ionization wave propulsion,and the temporal and spatial distribution of different particles in the pulsed microwave plasma jets.The parameters of plasma jet could be modulated by adjusting microwave power,modulation pulse parameters(modulation frequency and duty ratio),gas type and its flow rate,according to the requirements of application scenarios.