A Self-Healing Optoacoustic Patch with High Damage Threshold and Conversion Efficiency for Biomedical Applications

Compared with traditional piezoelectric ultrasonic devices,optoacoustic devices have unique advantages such as a simple preparation process,anti-electromagnetic interference,and wireless long-distance power supply.However,current optoacoustic devices remain limited due to a low damage threshold and energy conversion efficiency,which seriously hinder their widespread applications.In this study,using a self-healing polydimethylsiloxane(PDMS,Fe-Hpdca-PDMS)and carbon nanotube composite,a flexible optoacoustic patch is developed,which possesses the self-healing capability at room temperature,and can even recover from damage induced by cutting or laser irradiation.Moreover,this patch can generate high-intensity ultrasound(>25 MPa)without the focusing structure.The laser damage threshold is greater than 183.44 mJ cm^(-2),and the optoacoustic energy conversion efficiency reaches a major achievement at 10.66×10^(-3),compared with other carbon-based nanomaterials and PDMS composites.This patch is also been successfully examined in the application of acoustic flow,thrombolysis,and wireless energy harvesting.All findings in this study provides new insight into designing and fabricating of novel ultrasound devices for biomedical applications.

Mechanical reliable,NIR light-induced rapid self-healing hydrogel electrolyte towards flexible zinc-ion hybrid supercapacitors with low-temperature adaptability and long service life

Hydrogel electrolytes hold great potential in flexible zinc ion supercapacitors(ZICs)due to their high conductivity,good safety,and flexibility.However,freezing of electrolytes at low temperature(subzero)leads to drastic reduction in ionic conductivity and mechanical properties that deteriorates the performance of flexible ZICs.Besides,the mechanical fracture during arbitrary deformations significantly prunes out the lifespan of the flexible device.Herein,a Zn^(2+)and Li^(+)co-doped,polypyrrole-dopamine decorated Sb_(2)S_(3)incorporated,and polyvinyl alcohol/poly(N-(2-hydroxyethyl)acrylamide)double-network hydrogel electrolyte is constructed with favorable mechanical reliability,anti-freezing,and self-healing ability.In addition,it delivers ultra-high ionic conductivity of 8.6 and 3.7 S m^(-1)at 20 and−30°C,respectively,and displays excellent mechanical properties to withstand tensile stress of 1.85 MPa with tensile elongation of 760%,together with fracture energy of 5.14 MJ m^(-3).Notably,the fractured hydrogel electrolyte can recover itself after only 90 s of infrared illumination,while regaining 83%of its tensile strain and almost 100%of its ionic conductivity during−30–60°C.Moreover,ZICs coupled with this hydrogel electrolyte not only show a wide voltage window(up to 2 V),but also provide high energy density of 230 Wh kg^(-1)at power density of 500 W kg^(-1)with a capacity retention of 86.7%after 20,000 cycles under 20°C.Furthermore,the ZICs are able to retain excellent capacity even under various mechanical deformation at−30°C.This contribution will open up new insights into design of advanced wearable flexible electronics with environmental adaptability and long-life span.

High performance photodegradation resistant PVA@TiO_(2)/carboxyl-PES self-healing reactive ultrafiltration membrane

The occurrence of ultrafiltration(UF)membrane fouling frequently hampers the sustainable advancement of UF technology.Reactive self-cleaning UF membranes can effectively alleviate the problem of membrane fouling.Nevertheless,the self-cleaning process may accelerate membrane aging.Addressing these concerns,we present an innovative design concept for composite self-healing materials based on self-cleaning UF membranes.To begin,TiO_(2)nanoparticles were incorporated into the polymer molecular structure via molecular design,resulting in the synthesis of TiO_(2)/carboxyl-polyether sulfone(PES)hybrid materials.Subsequently,the nonsolvent-induced phase inversion technique was employed to prepare a novel of UF membrane.Lastly,a polyvinyl alcohol(PVA)hydrogel coating was applied to the hybrid UF membrane surface to create PVA@TiO_(2)/carboxyl-PES self-healing reactive UF membranes.By establishing a covalent bond,the TiO_(2)nanoparticles were effectively and uniformly dispersed within the UF membrane,leading to exceptional self-cleaning properties.Furthermore,the water-absorbing and swelling properties of PVA hydrogel,along with its capacity to form hydrogen bonds with water molecules,resulted in UF membranes with improved hydrophilicity and active self-healing abilities.The results demonstrated that the water contact angle of PVA@5%TiO_(2)/carboxyl-PES UF membrane was 43.1°.Following a 1-h exposure to simulated solar exposure,the water flux recovery ratio increased from 48.16%to 81.03%.Moreover,even after undergoing five cycles of 12-h simulated sunlight exposure,the UF membranes exhibited a consistent retention rate of over 97%,thus fully demonstrating their exceptional self-cleaning,antifouling,and selfhealing capabilities.We anticipate that the self-healing reactive UF membrane system will serve as a pioneering and comprehensive solution for the self-cleaning antifouling challenges encountered in UF membranes while also effectively mitigating the aging effects of reactive UF membranes.

An intrinsically self-healing and anti-freezing molecular chains induced polyacrylamide-based hydrogel electrolytes for zinc manganese dioxide batteries

The anti-freezing strategy of hydrogels and their self-healing structure are often contradictory,it is vital to break through the molecular structure to design and construct hydrogels with intrinsic anti-freezing/self-healing for meeting the rapid development of flexible and wearable devices in diverse service conditions.Herein,we design a new hydrogel electrolyte(AF/SH-Hydrogel)with intrinsic anti-freezing/self-healing capabilities by introducing ethylene glycol molecules,dynamic chemical bonding(disulfide bond),and supramolecular interaction(multi-hydrogen bond)into the polyacrylamide molecular chain.Thanks to the exceptional freeze resistance(84%capacity retention at-20℃)and intrinsic self-healing capabilities(95%capacity retention after 5 cutting/self-healing cycles),the obtained AF/SH-Hydrogel makes the zinc||manganese dioxide cell an economically feasible battery for the state-of-the-art applications.The Zn||AF/SH-Hydrogel||MnO_(2)device offers a near-theoretical specific capacity of 285 m A h g^(-1)at 0.1 A g^(-1)(Coulombic efficiency≈100%),as well as good self-healing capability and mechanical flexibility in an ice bath.This work provides insight that can be utilized to develop multifunctional hydrogel electrolytes for application in next generation of self-healable and freeze-resistance smart aqueous energy storage devices.

Effect of drying cracks on swelling and self-healing of bentonite-sand blocks used as engineered barriers for radioactive waste disposal

Experiments were conducted to evaluate the healing of drying cracks in air-dried bentonite-sand blocks after hydration and swelling in groundwater,providing justifications to simplify the protection of blocks prior to installation in a high-level radioactive waste repository.Synthetic groundwater was prepared to represent the geochemistry of Beishan groundwater,and was used to hydrate the blocks during the swelling pressure and swelling strain measurements,as Beishan is the most promising site for China's repository.Healing of the surface cracks was recorded by photography,and healing of the internal cracks was visualized by CT images and hydraulic conductivity of air-dried blocks.The results indicate that the maximum swelling pressure and swelling strain are primarily affected by the geochemistry of Beishan groundwater,but not affected by the drying cracks.The maximum swelling pressure and swelling strain of air-dried blocks are comparable to or even higher than the pressure and strain of fresh blocks.The maximum swelling pressure measured in strong(i.e.high ion strength)Beishan groundwater was 44%of the pressure measured in deionized(DI)water,and the maximum swelling strain was reduced to 23%of the strain measured in DI water.Nevertheless,the remained swelling of the blocks hydrated in strong Beishan groundwater was sufficient to heal the surface and internal drying cracks,as demonstrated by the pictures of surface cracks and CT images.The hydraulic conductivity of the air-dried block permeated with strong groundwater was comparable(3.7×higher)to the hydraulic conductivity of the fresh block,indicating the self-healing of drying cracks after hydration and swelling in groundwater.A simplified method of protecting the block with plastic wraps before installation is recommended,since the remained swelling of the block hydrated in Beishan groundwater is sufficient to heal the drying cracks.

Intrinsic Self-Healing Chemistry for Next-Generation Flexible Energy Storage Devices

The booming wearable/portable electronic devices industry has stimulated the progress of supporting flexible energy storage devices.Excellent performance of flexible devices not only requires the component units of each device to maintain the original performance under external forces,but also demands the overall device to be flexible in response to external fields.However,flexible energy storage devices inevitably occur mechanical damages(extrusion,impact,vibration)/electrical damages(overcharge,over-discharge,external short circuit)during longterm complex deformation conditions,causing serious performance degradation and safety risks.Inspired by the healing phenomenon of nature,endowing energy storage devices with self-healing capability has become a promising strategy to effectively improve the durability and functionality of devices.Herein,this review systematically summarizes the latest progress in intrinsic self-healing chemistry for energy storage devices.Firstly,the main intrinsic self-healing mechanism is introduced.Then,the research situation of electrodes,electrolytes,artificial interface layers and integrated devices based on intrinsic self-healing and advanced characterization technology is reviewed.Finally,the current challenges and perspective are provided.We believe this critical review will contribute to the development of intrinsic self-healing chemistry in the flexible energy storage field.

Self-Healing Liquid Metal Magnetic Hydrogels for Smart Feedback Sensors and High-Performance Electromagnetic Shielding

Hydrogels exhibit potential applications in smart wearable devices because of their exceptional sensitivity to various external stimuli.However,their applications are limited by challenges in terms of issues in biocompatibility,custom shape,and self-healing.Herein,a conductive,stretchable,adaptable,self-healing,and biocompatible liquid metal GaInSn/Ni-based composite hydrogel is developed by incorporating a magnetic liquid metal into the hydrogel framework through crosslinking polyvinyl alcohol(PVA)with sodium tetraborate.The excellent stretchability and fast self-healing capability of the PVA/liquid metal hydrogel are derived from its abundant hydrogen binding sites and liquid metal fusion.Significantly,owing to the magnetic constituent,the PVA/liquid metal hydrogel can be guided remotely using an external magnetic field to a specific position to repair the broken wires with no need for manual operation.The composite hydrogel also exhibits sensitive deformation responses and can be used as a strain sensor to monitor various body motions.Additionally,the multifunctional hydrogel displays absorption-dominated electromagnetic interference(EMI)shielding properties.The total shielding performance of the composite hydrogel increases to~62.5 dB from~31.8 dB of the pure PVA hydrogel at the thickness of 3.0 mm.The proposed bioinspired multifunctional magnetic hydrogel demonstrates substantial application potential in the field of intelligent wearable devices.

Self-Healing MXene-and Graphene-Based Composites:Properties and Applications

Today,self-healing graphene-and MXene-based composites have attracted researchers due to the increase in durability as well as the cost reduction in long-time applications.Different studies have focused on designing novel self-healing graphene-and MXenebased composites with enhanced sensitivity,stretchability,and flexibility as well as improved electrical conductivity,healing efficacy,mechanical properties,and energy conversion efficacy.These composites with self-healing properties can be employed in the field of wearable sensors,supercapacitors,anticorrosive coatings,electromagnetic interference shielding,electronic-skin,soft robotics,etc.However,it appears that more explorations are still needed to achieve composites with excellent arbitrary shape adaptability,suitable adhesiveness,ideal durability,high stretchability,immediate self-healing responsibility,and outstanding electromagnetic features.Besides,optimizing reaction/synthesis conditions and finding suitable strategies for functionalization/modification are crucial aspects that should be comprehensively investigated.MXenes and graphene exhibited superior electrochemical properties with abundant surface terminations and great surface area,which are important to evolve biomedical and sensing applications.However,flexibility and stretchability are important criteria that need to be improved for their future applications.Herein,the most recent advancements pertaining to the applications and properties of self-healing graphene-and MXene-based composites are deliberated,focusing on crucial challenges and future perspectives.

Self-healing wearable self-powered deep ultraviolet photodetectors based on Ga_(2)O_(3)

Gallium oxide(Ga_(2)O_(3))based flexible heterojunction type deep ultraviolet(UV)photodetectors show excellent solar-blind photoelectric performance,even when not powered,which makes them ideal for use in intelligent wearable devices.How-ever,traditional flexible photodetectors are prone to damage during use due to poor toughness,which reduces the service life of these devices.Self-healing hydrogels have been demonstrated to have the ability to repair damage and their combination with Ga_(2)O_(3) could potentially improve the lifetime of the flexible photodetectors while maintaining their performance.Herein,a novel self-healing and self-powered flexible photodetector has been constructed onto the hydrogel substrate,which exhibits an excellent responsivity of 0.24 mA/W under 254 nm UV light at zero bias due to the built-in electric field originating from the PEDOT:PSS/Ga_(2)O_(3) heterojunction.The self-healing of the Ga_(2)O_(3) based photodetector was enabled by the reversible property of the synthesis of agarose and polyvinyl alcohol double network,which allows the photodetector to recover its original configu-ration and function after damage.After self-healing,the photocurrent of the photodetector decreases from 1.23 to 1.21μA,while the dark current rises from 0.95 to 0.97μA,with a barely unchanged of photoresponse speed.Such a remarkable recov-ery capability and the photodetector’s superior photoelectric performance not only significantly enhance a device lifespan but also present new possibilities to develop wearable and intelligent electronics in the future.

基于主客观环流分型的强降水数值预报MODE检验方法及其在2019年暖季东北地区的应用

本文构建了基于主客观环流分型的强降水数值预报空间检验(MODE)方法框架,并利用该框架对欧洲中期天气预报中心全球模式(ECMWF)和中国气象局区域中尺度数值天气预报模式(CMA_MESO)的2019年暖季东北地区强降水预报进行检验。结果表明,2019年暖季东北地区54个强降水日的环流型可分为:西风槽型(15个)、副热带高压影响型(13个)、急流型(5个)、西部(12个)和东部冷涡型(9个)。其中,西风槽型和急流型以区域性强降水为主,模式对其强降水发生与否的预报能力强,TS评分较高;西部、东部冷涡型强降水的局地性强,模式对其强降水发生与否的预报能力差,TS评分低;副热带高压影响型也以区域性强降水为主,模式对其强降水发生与否的预报能力也比较强,但是对其强降水质心位置、强度、面积等属性预报偏差较大,TS评分也相对较低。另外,从两种模式预报性能对比看,CMA_MESO强降水强度和面积预报较实况普遍偏强,虽然其预报的TS评分一般高于ECMWF,但其对强降水预报的空报率也都比ECMWF大,对强降水的属性预报偏差一致性一般也低于ECMWF,其预报的可订正性整体上不及ECMWF。

Wide temperature range-and damage-tolerant microsupercapacitors from salt-tolerant, anti-freezing and self-healing organohydrogel via dynamic bonds modulation

The advance of microelectronics requires the micropower of microsupercapacitors(MSCs) to possess wide temperature-and damage-tolerance beyond high areal energy density.The properties of electrolyte are crucial for MSCs to meet the above requirements.Here,an organohydrogel electrolyte,featured with high salt tolerance,ultralow freezing point,and strong self-healing ability,is experimentally realized via modulating its inner dynamic bonds.Spectroscopic and theoretical analysis reveal that dimethyl sulfoxide has the ability to reconstruct Li^(+)solvation structure,and interact with free water and polyvinyl alcohol chains via forming hydrogen bonds.The organohydrogel electrolyte is employed to build MSCs,which show a boosted energy density,promising wide temperature range-and damage-tolerant ability.These attractive features make the designed organohydrogel electrolyte have great potential to advance MSCs.

A self-healing and conductive ionic hydrogel based on polysaccharides for flexible sensors

In this study,we proposed a self-healing conductive hydrogel based on polysaccharides and Li+to serve as flexible sensors.At first,the oxidized sodium alginate(OSA)was obtained through the oxidation reaction of sodium alginate(SA).Then OSA,carboxymethyl chitosan(CMC),and agarose(AGO)were dissolved in LiCl solution,respectively.Finally,the hydrogel was obtained through heating,mixing,and cooling processes.Because of the Schiff base structure and hydrogen bonding,the hydrogel demonstrates good mechanical and self-healing properties.The presence of Li+provides good conductivity for the hydrogel.In addition,we demonstrated the application of the hydrogel as the flexible sensors.It can perceive the process of pressing Morse code with the index finger as a pressure sensor and monitor sliding movement of the thumb as the strain sensor to browse the web with the mobile phone.Thus,the selfhealing conductive hydrogel may have potential applications in flexible wearable sensors.

一种基于粗糙熵的改进K-modes聚类算法

K-modes聚类算法被广泛应用于人工智能、数据挖掘等领域。传统的K-modes聚类算法有不错的聚类效果,但是存在迭代次数多、计算量大、容易受到冗余属性的干扰等问题,且仅采用简单的0-1匹配的方法来定义2个样本属性值之间的距离,没有充分考虑每个属性对聚类结果的影响。针对上述问题,该文将粗糙熵引入K-modes算法。首先利用粗糙集属性约简算法消除冗余属性,确定各属性的重要程度;然后利用粗糙熵确定每个属性的权重,从而定义新的类内距离。将该文所提算法与传统的K-modes聚类算法分别在4组公开数据集上进行对比试验。试验结果表明,该文所提算法聚类准确率比传统的K-modes聚类算法更高。

Thermo-driven oleogel-based self-healing slippery surface behaving superior corrosion inhibition to Mg-Li alloy

Bioinspired by Nepenthes, lubricant infused surfaces(LIS) have attracted widespread attention in the field of anticorrosion. However,the lubricant coating has some disadvantages such as complex construction processing and easy loss of oil phase in air or dynamic water phase. In this study, oleogel is infused into a lotus leaf inspired super-hydrophobic matrix to form an oleogel infused surface(OIS) for enhancing corrosion resistance of active Mg-Li alloy. For reserving oleogel, firstly, a facile one-step electrodeposition method is used to construct super-hydrophobic surface(SHS) composed by samarium/myristic acid complex micro-nano flower structure onto Mg-Li alloy.The coating exhibits excellent superhydrophobic property at a static contact angle of 160° by applying 30 V electrolysis for 30 min. The protection efficiency of single SHS highly relates with the metal itself. For short period immersion in water phase, SHS can afford protection to Mg-Li alloy. However, the long-term immersion will see the rapid failure of SHS, and the high activity of Mg-Li alloy is one main reason.We assume that SHS cannot be a good choice for protecting Mg-Li alloy. Then, a Nepenthes inspired liquid coating is formed by infusing oleogel into the micro-nano structure by a spin-coating method. The liquid coating performs prominent corrosion resistance with Rctreaching as high as 1.51 × 10^(10)Ω cm^(2). After the mechanical damage from the external environment, the liquid coating can realize self-repair through thermal assistance, and the liquid coating can still restore Rctup to 1.24 × 10^(10)Ω cm^(2) after healing. The corrosion resistance of the liquid coating remains strong by showing Rctas high as 1.14 × 10^(9)Ω cm^(2), even after immersion in representative corrosive 3.5 wt% Na Cl solution for 30 d.

Recyclability and Self-Healing of Dynamic Cross-Linked Polyimide with Mechanical/Electrical Damage

Recyclability and self-healing are two most critical factors in developing sustainable polymers to deal with environmental pollution and resource waste.In this work,a dynamic cross-linked polyimide insulation film with full closed-loop recyclability is successfully prepared,which also possesses good self-healing ability after being mechanical/electrical damaged depending on the Schiff base dynamic covalent bonds.The recycled and self-healed polyimide film still maintain its good tensile strength(r t)>60 MPa with Young’s modulus(E)>4 GPa,high thermal stability with glass transition temperature(T g)>220℃,and outstanding insulation property with breakdown strength(E 0)>358 kV mm^(-1),making it a very promising low energy consumption and high temperature resistant insulation material.The strategy of using Schiff base dynamic covalent bonds for reversible repairing the structure of high T g polyimides promotes the wider application of such sustainable and recyclable material in the field of electrical power and micro-electronics.

A self-healing and bioactive coating based on duplex plasma electrolytic oxidation/polydopamine on AZ91 alloy for bone implants

Magnesium(Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties. Nevertheless, poor corrosion resistance hinders their biomedical applications. Besides, it is necessary to endow Mg alloys with bioactive property, which is crucial for temporary bone implants. Here, a self-healing, corrosion resistant and bioactive duplex coating of plasma electrolytic oxidization(PEO)/polydopamine(PDA) is applied on AZ91 substrate using PEO and subsequent electrodeposition process. Moreover, the role of different electrodeposition times(60 s, 120 s) and dopamine concentrations(1 and 1.5 mg/ml) to improve corrosion resistance, bioactivity, biocompatibility and self-healing property and its mechanism are investigated. The results indicate that the PEO coating is efficiently sealed by the PDA, depending on the electrodeposition parameters. Noticeably, electrodeposition for 120 s in dopamine concentration of 1 mg/ml(120T-1C) results in the formation of uniform and crack-free PDA coating. Duplex PEO/PDA coatings reveal high bioactivity compared to PEO coating, owing to electrostatic interaction between PDA top-layer and calcium and phosphate ions as well as high hydrophilicity of coatings. In addition, duplex PEO/PDA coatings also show improved and more stable protective performance than the PEO and bare alloy, depending on the PDA deposition parameters. Noticeably, the corrosion current density of the 120T-1C decreases one orders of magnitude compared to PEO. In addition, the presence of a broad passivation region in the anodic polarization branch shows durable self-healing property via Zipper-like mechanism, demonstrating the duplex coating could preserve promising corrosion resistance.Furthermore, the cytocompatibility of duplex coated samples is also confirmed via interaction with MG63 cells. In summary, the PEO/PDA coating with great corrosion protection, self-healing ability, bioactivity and biocompatibility could be a promising candidate for degradable magnesium-based implants.

Behavior Characteristics of Asphalt Components during the Process of Nano-cracks Temperature Self-healing

In order to investigate the behavior characteristics of asphalt components during the process of nano-cracks temperature self-healing(NTS),molecular simulation technology was used to simulate the temperature self-healing of asphalt.Based on the determination of asphalts(virgin asphalt and aged asphalt),the proportional changes of asphalt components were confirmed.The distribution characteristics of asphalt components were obtained by marking different components in the process of NTS.At the same time,the rationality of the micro simulation findings was confirmed by asphalt performance tests and infrared spectroscopy results.The results show that different asphalt components have different behavior characteristics in the process of NTS.The content of asphaltene and resin plays a key role in the process of NTS,while saturation and aromatics play an active role in the temperature self-healing before and after aging.The NTS is the result of the comprehensive action of different components,and the self-healing efficiency is proportional to the relative molecular mass.The effect of aging on the NTS is also realized by changing the proportion of asphalt components.

Self-healing Au/PVDF-HFP composite ionic gel for flexible underwater pressure sensor

Ionic gels can be potentially used in wearable devices owing to their high humidity resistance and non-volatility.However,the applicability of existing ionic gel pressure sensors is limited by their low sensitivity.Therefore,it is very import-ant to develop an ionic gel pressure sensor with high sensitivity and a wide pressure detection range without sacrificing mechan-ical stretchability and self-healing ability.Herein,we report an effective strategy for developing pressure sensors based on ion-ic gel composites consisting of high-molecular-weight polymers,ionic liquids,and Au nanoparticles.The resulting capacitive pressure sensors exhibit high pressure sensitivity,fast response,and excellent self-healing properties.The sensors composed of highly hydrophobic polymers and ionic liquids can be used to track underwater movements,demonstrating broad application prospects in human motion state monitoring and underwater mechanical operations.

Novel PA encapsulated PCL hybrid coating for corrosion inhibition of biodegradable Mg alloys:A triple triggered self-healing response for synergistic multiple protection

Surface coatings have been extensively used to control the degradation rate of Mg alloys for bioimplant applications.However,these coatings only act as passive barriers.In corrosive media,structural damage impairs their barrier properties,resulting in rapid degradation of Mg alloys.The present study incorporates phytic acid(PA)as a healing agent in polycaprolactone(PCL)microcapsules with a unique honeycomb core matrix to obtain a self-healing PA-PCLcaps coating.The contact between simulated body fluid(SBF)and PA-PCLcaps coated ZM21 exhibited Cassie-Baxter interfacial states,resulting in significant hydrophobicity with a contact angle(CA)of 116.3.The corrosion potential(Ecorr)and current density(Icorr)were found to be-0.28 V and 1.1×10^(-9)A/cm^(2),respectively,for PA-PCLcaps coating,resulting in biosafe corrosion rate of 2.5×10^(-4)mm/year.After mechanical scratching,rapid HA mineralization at scratched regions recovered the hydrogen evolution rate(HER,0.36 mL/cm^(2)/day)and pH change(pH 7.10)of scratched PA-PCLcaps coated ZM21 samples to corresponding unscratched samples within one day of immersion.The coating’s self-healing ability could be attributed to PA released from punctured microcapsules,which facilitates HA chelation.The pH-triggered(pH 10)and Mg(II)-triggered(5 mM)conditions enhanced PA release from PA-PCLcaps coating by 2.5 and 3.1 times,respectively.As a result,dense HA mineralization occurred,which protects the coating from structural defects and ensures its durability in stimulating conditions.The findings of present study provide new insight for design of multiple stimuli-feedback based self-healing coatings on biodegradable Mg alloys.

Evaluation of Self-Healing Efficiency of Microcapsule-Based Self-Healing Cementitious Composites Based on Acoustic Emission

Microcapsule self-healing technology is one of the effective methods to solve the durability problem of cementbased composites.The evaluation method of the self-healing efficiency of microcapsule self-healing cement-based composites is one of the difficulties that limits the self-healing technology.This paper attempts to characterize the self-healing efficiency of microcapsule self-healing cement-based composites by acoustic emission(AE)parameters,which provides a reference for the evaluation of microcapsule self-healing technology.Firstly,a kind of self-healing microcapsules were prepared,and the microcapsules were added into the cement-based composites to prepare the compression samples.Then,the specimen with certain pre damage was obtained by compression test.Secondly,the damaged samples were divided into two groups.One group was directly used for compression tests to obtain the damage failure process.The other group was put into water for healing for 30 days,and then compression tests were carried out to study the influence of self-healing on the compression failure process.During the experiments,the AE signals were collected and the AE characteristics were extracted for the evaluation of self-healing efficiency.The results show that the compression pre damage test can trigger the microcapsule,and the compression strength of the self-healing sample is improved.The failure mechanism of microcapsule selfhealing cement-based composites can be revealed by the AE parameters during compression,and the self-healing efficiency can be quantitatively characterized by AE hits.The research results of this paper provide experimental reference and technical support for the mechanical property test and healing efficiency evaluation of microcapsule self-healing cement-based composites.