Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple stake...Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple staked direct bonded copper(DBC) unit based power module packaging method to parallel more chips. This method utilizes mutual inductance cancellation effect to reduce parasitic inductance. Because the conduction area in the new package is doubled, the overall area of power module can be reduced. Entire power module is divided into smaller units to enhance manufacture yield, and improve design freedom. This paper provides a detailed design, analysis and fabrication procedure for the proposed package structure. Additionally, this paper offers several feasible solutions for the connection between power terminals and DBC untis. With the structure, 18dies were paralleled for each phase-leg in a econodual size power module. Both simulation and double pulse test results demonstrate that, compared to conventional layouts, the proposed package method has 74.8% smaller parasitic inductance and 34.9% lower footprint.展开更多
Vehicle interior noise has emerged as a crucial assessment criterion for automotive NVH(Noise,Vibration,and Harshness).When analyzing the NVH performance of the vehicle body,the traditional SEA(Statistical Energy Anal...Vehicle interior noise has emerged as a crucial assessment criterion for automotive NVH(Noise,Vibration,and Harshness).When analyzing the NVH performance of the vehicle body,the traditional SEA(Statistical Energy Analysis)simulation technology is usually limited by the accuracy of the material parameters obtained during the acoustic package modeling and the limitations of the application conditions.In order to effectively solve these shortcomings,based on the analysis of the vehicle noise transmission path,a multi-level objective decomposition architecture of the interior noise at the driver’s right ear is established.Combined with the data-driven method,the ResNet neural network model is introduced.The stacked residual blocks avoid the problem of gradient dis-appearance caused by the increasing network level of the traditional CNN network,thus establishing a higher-precision prediction model.This method alleviates the inherent limitations of traditional SEA simulation design,and enhances the prediction performance of the ResNet model by dynamically adjusting the learning rate.Finally,the proposed method is applied to a specific vehicle model and verified.The results show that the proposed meth-od has significant advantages in prediction accuracy and robustness.展开更多
Bisphenol A (BPA), an important endocrine disruptor, is used in the manufacturing of various materials, including food packaging. Ingestion of contaminated foodstuffs is, in fact, the most relevant form of exposure to...Bisphenol A (BPA), an important endocrine disruptor, is used in the manufacturing of various materials, including food packaging. Ingestion of contaminated foodstuffs is, in fact, the most relevant form of exposure to this substance. However, scarce data on the presence of this contaminant in milk, or whether different types of food packaging influence food contamination are available in Brazil. This study, therefore, aimed to evaluate the BPA contamination of whole milk (fluid and powder) samples packaged in different types of packaging (Tetra Pak?;PET: Poly (ethylene terephthalate;Metallic can (epoxy resin);Polyethylene (PE) and poly (vinylidene chloride) (PVDC);Laminated Film - Metallized Polyester-Polyethylene and glass) and marketed metropolitan region of Rio de Janeiro, Brazil. An analytical method for the BPA determination in milk was optimized for both fluid (pasteurized and ultra-high temperature) and powdered milk samples. A modified QuEChERS method was applied, and BPA determinations were conducted by ultra-performance liquid chromatography coupled with sequential mass spectrometry (HPLC-MS/MS). The validated method was then applied to 51 milk samples, where BPA was detected in five samples (9.8%) and quantified in two (3.8%).展开更多
Cannabis sativa L. is used as fiber, food, and medicine in several countries. Though it is illegal for recreational use in most of the world, there are some countries that have legalized production and sale. There is ...Cannabis sativa L. is used as fiber, food, and medicine in several countries. Though it is illegal for recreational use in most of the world, there are some countries that have legalized production and sale. There is a lot of research on production of cannabis, but less so on storage technologies. Cannabis contains several high value compounds, such as cannabinoids and terpenoids, that are susceptible to degradation via light, temperature, and oxygen. Several studies have explored temperature and light, and industry has adjusted accordingly. However, less is known about oxygen-induced degradation. Biochemical studies have demonstrated oxidative degradation of high value compounds, and many producers use some form of modified atmospheric packaging (MAP) for storage. However, the efficacy of MAP is unclear. The objective of this paper is to review our current understanding of MAP in postharvest cannabis storage and identify avenues where additional research is needed.展开更多
Non-degradable polymers cause serious environmental pollution problem,such as the widely-used while unrecyclable coatings which significantly affect the overall degradation performance of products.It is imperative and ...Non-degradable polymers cause serious environmental pollution problem,such as the widely-used while unrecyclable coatings which significantly affect the overall degradation performance of products.It is imperative and attractive to develop biodegradable functional coatings.Herein,we proposed a novel strategy to successfully prepare biodegradable,thermoplastic and hydrophobic coatings with high transparence and biosafety by weakening the interchain interactions between cellulose chain.The natural cellulose and cinnamic acid were as raw materials.Via reducing the degree of polymerization(DP)of cellulose and regulating the degree of substitution(DS)of cinnamate moiety,the obtained cellulose cinnamate(CC)exhibited not only the thermalflow behavior but also good biodegradability,which solves the conflict between the thermoplasticity and biodegradability in cellulose-based materials.The glass transition temperature(T_(g))and thermalflow temperature(T_(f))of the CC could be adjusted in a range of 150–200℃ and 180–210℃,respectively.The CC with DS<1.2 and DP≤100 degraded more than 60%after an enzyme treatment for 7 days,and degraded more than 80%after a composting treatment for 42 days.Furthermore,CC had no toxicity to human epidermal cells even at a high concentration(0.5 mg mL^(-1)).In addition,CC could be easily fabricated into multifunctional coating with high hydrophobicity,thermal adhesion and high transparence.Therefore,after combining with cellophane and paperboard,CC coating with low DP and DS could be used to prepare fully-biodegradable heat-sealing packaging,art paper,paper cups,paper straws and food packaging boxes.展开更多
The synergistic effect of organoclay(OC)and zinc oxide(ZnO)nanoparticles on the crucial properties of poly(lactic acid)(PLA)nanocompositefilms was systematically investigated herein.After their incorporation into PLA v...The synergistic effect of organoclay(OC)and zinc oxide(ZnO)nanoparticles on the crucial properties of poly(lactic acid)(PLA)nanocompositefilms was systematically investigated herein.After their incorporation into PLA via the solvent casting technique,the water vapor barrier property of the PLA/OC/ZnOfilm improved by a maximum of 86%compared to the neat PLAfilm without the deterioration of Young’s modulus or the tensile strength.Moreover,thefilm’s self-antibacterial activity against foodborne pathogens,including gram-negative(Escherichia coli,E.coli)and gram-positive(Staphylococcus aureus,S.aureus)bacteria,was enhanced by a max-imum of approximately 98–99%compared to the neat PLAfilm.Furthermore,SEM images revealed the homo-geneous dispersion of both nano-fillers in the PLA matrix.However,the thermal stability of thefilm decreased slightly after the addition of the OC and ZnO.Thefilm exhibited notable light barrier properties in the UV-Vis range.Moreover,the incorporation of a suitable biodegradable plasticizer significantly decreased the Tg and notably enhanced theflexibility of the nanocompositefilm by increasing the elongation at break approxi-mately 1.5-fold compared to that of the neat PLAfilm.This contributes to its feasibility as an active food packa-ging material.展开更多
Here,we aimed to study the changes in proteome of golden pompano fillets during post-mortem storage.Tandem mass tags(TMT)-labeled quantitative proteomic strategy was applied to investigate the relationships between pr...Here,we aimed to study the changes in proteome of golden pompano fillets during post-mortem storage.Tandem mass tags(TMT)-labeled quantitative proteomic strategy was applied to investigate the relationships between protein changes and quality characteristics of modified atmosphere packaging(MAP)fillets during superchilling(-3°C)storage.Scanning electron microscopy was used to show that the muscle histology microstructure of fillets was damaged to varying degrees,and low-field nuclear magnetic resonance was used to find that the immobilized water and free water in the muscle of fillets changed significantly.Total sulfhydryl content,TCA-soluble peptides and Ca2+-ATPase activity also showed that the fillet protein had a deterioration by oxidation and denaturation.The Fresh(FS),MAP,and air packaging(AP)groups were set.Total of 150 proteins were identified as differential abundant proteins(DAPs)in MAP/FS,while 209 DAPs were in AP/FS group.The KEGG pathway analysis indicated that most DAPs were involved in binding proteins and protein turnover.Correlation analysis found that 52 DAPs were correlated with quality traits.Among them,8 highly correlated DAPs are expected to be used as potential quality markers for protein oxidation and water-holding capacity.These results provide a further understanding of the muscle deterioration mechanism of packaging golden pompano fillets during superchilling.展开更多
With the vigorous development of consumer culture in today’s society,various types of food packaging also appear in front of consumers in different forms.There are very big differences in food packaging in terms of s...With the vigorous development of consumer culture in today’s society,various types of food packaging also appear in front of consumers in different forms.There are very big differences in food packaging in terms of shape,color,style and other aspects of information transmission,which have the most direct impact on the audience’s food consumption needs.Driven by the consumption-oriented society,food packaging has shown very obvious comprehensive characteristics,is significantly interdisciplinary,and has close connections with other disciplines.This article will analyze and sort out the impact of food packaging on consumer psychology from different perspectives.展开更多
The objective of this study is to improve the mechanical properties and machining performance of high thermal conductivity and low expansion silicon carbide dispersion-strengthened hypereutectic aluminum-silicon elect...The objective of this study is to improve the mechanical properties and machining performance of high thermal conductivity and low expansion silicon carbide dispersion-strengthened hypereutectic aluminum-silicon electronic packaging materials to meet the needs of aviation,aerospace,and electronic packaging fields.We used the powder metallurgy method and high-temperature hot pressing technology to prepare SiC/Al-Si composite materials with different SiC contents(5vol%,10vol%,15vol%,and 20vol%).The results showed that as the SiC content increased,the tensile strength of the composite material first increased and then decreased.The tensile strength was the highest when the SiC content was 15%;the sintering temperature significantly affected the composite material’s structural density and mechanical properties.Findings indicated 700℃was the optimal sintering and the optimal SiC content of SiC/Al-Si composite materials was between 10%and 15%.Besides,the sintering temperature should be strictly controlled to improve the material’s structural density and mechanical properties.展开更多
An ultrasonic test of spot welding for stainless steel is conducted. Based on wavelet packet decomposition, the ultrasonic echo signal has been analyzed deeply in time - frequency domain, which can easily distinguish ...An ultrasonic test of spot welding for stainless steel is conducted. Based on wavelet packet decomposition, the ultrasonic echo signal has been analyzed deeply in time - frequency domain, which can easily distinguish the nugget from the corona bond. The 2D C-scan images produced by ultrasonic C scan which contribute to quantitatively calculate the nugget diameter for the computer are further analyzed. The spot welding nugget diameter can be automatically obtained by image enhancement, edge detection and equivalent diameter algorithm procedure. The ultrasonic detection values in this paper show good agreement with the metallographic measured values. The mean value of normal distribution curve is 0.006 67, and the standard deviation is 0.087 11. Ultrasonic C-scan test based on wavelet packet signal analysis is of high accuracy and stability.展开更多
The finite element method(FEM) is used to analyze the effects of lead widths and pitches on reliability of soldered joints. The optimum simulation for QFP devices is also researched. The results indicate that when t...The finite element method(FEM) is used to analyze the effects of lead widths and pitches on reliability of soldered joints. The optimum simulation for QFP devices is also researched. The results indicate that when the lead pitches are the same, the maximum equivalent stress of the soldered joints increases with the increasing of lead widths, while the reliability of the soldered joints reduces. When the lead widths are the same, the maximum equivalent stress of the soldered joints doesn't decrease completely with the increasing of lead pitches, a minimum value of the maximum equivalent stress values exists in all the curves. Under this condition the maximum equivalent stress of the soldewed joints is relatively the least, the reliability of soldered joints is high and the assembly is excellent. The simulating results indicate the best parameter: The lead width is 0.2 mm and lead pitch is 0.3 mm (the distance between two leads is 0.1 mm), which are benefited for the micromation of QFP devices now. The minimum value of the maximum equivalent stress of soldered joints exists while lead width is 0.25 mm and lead pitch is 0.35 mm (the distance between two leads is 0.1 mm), the devices can serve for a long time and the reliability is the highest, the assembly is excellent. The simulating results also indicate the fact that the lead width is 0.15 mm and lead pitch is 0.2 mm maybe the limit of QFP, which is significant for the high lead count and micromation of assembly.展开更多
The physics package of a chip-scale atomic clock (CSAC) has been successfully realized by integrating vertical cavity surface emitting laser (VCSEL), neutral density (ND) filter, λ/4 wave plate, 87Rb vapor cell...The physics package of a chip-scale atomic clock (CSAC) has been successfully realized by integrating vertical cavity surface emitting laser (VCSEL), neutral density (ND) filter, λ/4 wave plate, 87Rb vapor cell, photodiode (PD), and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.展开更多
The effects of thickness and types of gold plating on the resistance to hightemperature discoloration of gold plating on cavity surface of ceramic package were investigated. Itwas found that the thicker gold plating, ...The effects of thickness and types of gold plating on the resistance to hightemperature discoloration of gold plating on cavity surface of ceramic package were investigated. Itwas found that the thicker gold plating, the less discoloration degree for ceramic packages.Non-cyanide gold plating performed better resistance to high-temperature aging than cyanide goldplating. The relationship between the gold plating thickness and the amount of diffused Ni to thegold plating of ceramic packages with Au/Ni and Au/Ni-Co platings after heating at 420℃ for 15 minwas also studied. When the gold plating thickness reach 2.0 μm and 1.6 μm for Au/Ni and Au/Ni-Coplating systems, respectively, no discoloration was observed on the gold plating surface of cavity,and the corresponding diffused Ni amounts (mass fraction) are 1.0% and 0.4%, while the diffused Coto the gold plating is 0.04%.展开更多
Au80Sn20 alloy is a widely used solder for laser diode packaging.In this paper,the thermal resistance of Ga N-based blue laser diodes packaged in TO56 cans were measured by the forward voltage method.The microstructur...Au80Sn20 alloy is a widely used solder for laser diode packaging.In this paper,the thermal resistance of Ga N-based blue laser diodes packaged in TO56 cans were measured by the forward voltage method.The microstructures of Au80Sn20 solder were then investigated to understand the reason for the difference in thermal resistance.It was found that the microstructure with a higher content of Au-rich phase in the center of the solder and a lower content of(Au,Ni)Sn phase at the interface of the solder/heat sink resulted in lower thermal resistance.This is attributed to the lower thermal resistance of Au-rich phase and higher thermal resistance of(Au,Ni)Sn phase.展开更多
A software package to be used in high-speed oscilloscope-basedthree-dimensionalbunch-by-bunch charge and position measurement is presented.The software package takes the pick-up electrode signal waveform recorded by t...A software package to be used in high-speed oscilloscope-basedthree-dimensionalbunch-by-bunch charge and position measurement is presented.The software package takes the pick-up electrode signal waveform recorded by the high-speed oscilloscope as input,and it calculates and outputs the bunch-by-bunch charge and position.In addition to enabling a three-dimensional observation of the motion of each passing bunch on all beam position monitor pick-up electrodes,it offers many additional features such as injection analysis,bunch response function reconstruction,and turn-by-turn beam analysis.The software package has an easy-to-understand graphical user interface and convenient interactive operation,which has been verified on the Windows 10 system.展开更多
<span style="font-family:Verdana;">The subjects of this study were 80 patients who underwent mixed hemorrhoids surgery in our hospital from January to October 2020 (mixed hemorrhoids external and inter...<span style="font-family:Verdana;">The subjects of this study were 80 patients who underwent mixed hemorrhoids surgery in our hospital from January to October 2020 (mixed hemorrhoids external and internal ligation, internal hemorrhoids ligation or Xiaozhiling injection) and developed anal edge edema after surgery. According to the order of hospitalization, the patients were randomly divided into treatment group and control group, with 40 cases each.</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">In the control group, blank hot pack was applied on the basis of anorectal No. 1 lotion for prevention and treatment of anal edge edema after operation;in the treatment group, hot pack of Traditional Chinese medicine was applied on the basis of anorectal No. 1 lotion for prevention and treatment of anal edge edema. The course of treatment was 7 days.</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">The edema subsidence and postoperative pain scores were observed in both groups.</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">Results: The scores of anal edema and pain in the treatment group were significantly lower than those in the control group (P < 0.05), and the significant efficiency and total effective rate in the treatment group were significantly better than those in the control group, with statistical difference (P < 0.05).</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">Conclusion: Chinese medicine hot election package is effective in treating postoperative anal edema of mixed hemorrhoids, and the method is simple and suitable for clinical promotion.</span>展开更多
基金supported in part by National Key R&D Program of China (2021YFB2500600)CAS Youth multi-discipline project (JCTD-2021-09)Strategic Piority Research Program of Chinese Academy of Sciences (XDA28040100)。
文摘Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple staked direct bonded copper(DBC) unit based power module packaging method to parallel more chips. This method utilizes mutual inductance cancellation effect to reduce parasitic inductance. Because the conduction area in the new package is doubled, the overall area of power module can be reduced. Entire power module is divided into smaller units to enhance manufacture yield, and improve design freedom. This paper provides a detailed design, analysis and fabrication procedure for the proposed package structure. Additionally, this paper offers several feasible solutions for the connection between power terminals and DBC untis. With the structure, 18dies were paralleled for each phase-leg in a econodual size power module. Both simulation and double pulse test results demonstrate that, compared to conventional layouts, the proposed package method has 74.8% smaller parasitic inductance and 34.9% lower footprint.
基金This research was funded by the SWJTU Science and Technology Innovation Project,Grant Number 2682022CX008the Natural Science Foundation of Sichuan Province,Grant Numbers 2022NSFSC1892,2023NSFSC0395.
文摘Vehicle interior noise has emerged as a crucial assessment criterion for automotive NVH(Noise,Vibration,and Harshness).When analyzing the NVH performance of the vehicle body,the traditional SEA(Statistical Energy Analysis)simulation technology is usually limited by the accuracy of the material parameters obtained during the acoustic package modeling and the limitations of the application conditions.In order to effectively solve these shortcomings,based on the analysis of the vehicle noise transmission path,a multi-level objective decomposition architecture of the interior noise at the driver’s right ear is established.Combined with the data-driven method,the ResNet neural network model is introduced.The stacked residual blocks avoid the problem of gradient dis-appearance caused by the increasing network level of the traditional CNN network,thus establishing a higher-precision prediction model.This method alleviates the inherent limitations of traditional SEA simulation design,and enhances the prediction performance of the ResNet model by dynamically adjusting the learning rate.Finally,the proposed method is applied to a specific vehicle model and verified.The results show that the proposed meth-od has significant advantages in prediction accuracy and robustness.
文摘Bisphenol A (BPA), an important endocrine disruptor, is used in the manufacturing of various materials, including food packaging. Ingestion of contaminated foodstuffs is, in fact, the most relevant form of exposure to this substance. However, scarce data on the presence of this contaminant in milk, or whether different types of food packaging influence food contamination are available in Brazil. This study, therefore, aimed to evaluate the BPA contamination of whole milk (fluid and powder) samples packaged in different types of packaging (Tetra Pak?;PET: Poly (ethylene terephthalate;Metallic can (epoxy resin);Polyethylene (PE) and poly (vinylidene chloride) (PVDC);Laminated Film - Metallized Polyester-Polyethylene and glass) and marketed metropolitan region of Rio de Janeiro, Brazil. An analytical method for the BPA determination in milk was optimized for both fluid (pasteurized and ultra-high temperature) and powdered milk samples. A modified QuEChERS method was applied, and BPA determinations were conducted by ultra-performance liquid chromatography coupled with sequential mass spectrometry (HPLC-MS/MS). The validated method was then applied to 51 milk samples, where BPA was detected in five samples (9.8%) and quantified in two (3.8%).
文摘Cannabis sativa L. is used as fiber, food, and medicine in several countries. Though it is illegal for recreational use in most of the world, there are some countries that have legalized production and sale. There is a lot of research on production of cannabis, but less so on storage technologies. Cannabis contains several high value compounds, such as cannabinoids and terpenoids, that are susceptible to degradation via light, temperature, and oxygen. Several studies have explored temperature and light, and industry has adjusted accordingly. However, less is known about oxygen-induced degradation. Biochemical studies have demonstrated oxidative degradation of high value compounds, and many producers use some form of modified atmospheric packaging (MAP) for storage. However, the efficacy of MAP is unclear. The objective of this paper is to review our current understanding of MAP in postharvest cannabis storage and identify avenues where additional research is needed.
基金supported by the National Natural Science Foundation of China(No.52173292)the National Key Research and Development Project of China(No.2020YFC1910303)the Youth Innovation Promotion Association CAS(No.2018040).
文摘Non-degradable polymers cause serious environmental pollution problem,such as the widely-used while unrecyclable coatings which significantly affect the overall degradation performance of products.It is imperative and attractive to develop biodegradable functional coatings.Herein,we proposed a novel strategy to successfully prepare biodegradable,thermoplastic and hydrophobic coatings with high transparence and biosafety by weakening the interchain interactions between cellulose chain.The natural cellulose and cinnamic acid were as raw materials.Via reducing the degree of polymerization(DP)of cellulose and regulating the degree of substitution(DS)of cinnamate moiety,the obtained cellulose cinnamate(CC)exhibited not only the thermalflow behavior but also good biodegradability,which solves the conflict between the thermoplasticity and biodegradability in cellulose-based materials.The glass transition temperature(T_(g))and thermalflow temperature(T_(f))of the CC could be adjusted in a range of 150–200℃ and 180–210℃,respectively.The CC with DS<1.2 and DP≤100 degraded more than 60%after an enzyme treatment for 7 days,and degraded more than 80%after a composting treatment for 42 days.Furthermore,CC had no toxicity to human epidermal cells even at a high concentration(0.5 mg mL^(-1)).In addition,CC could be easily fabricated into multifunctional coating with high hydrophobicity,thermal adhesion and high transparence.Therefore,after combining with cellophane and paperboard,CC coating with low DP and DS could be used to prepare fully-biodegradable heat-sealing packaging,art paper,paper cups,paper straws and food packaging boxes.
基金Prince of Songkla University(PSU),Hat Yai,Songkhla,Thailand(Grant Number AGR581246S).
文摘The synergistic effect of organoclay(OC)and zinc oxide(ZnO)nanoparticles on the crucial properties of poly(lactic acid)(PLA)nanocompositefilms was systematically investigated herein.After their incorporation into PLA via the solvent casting technique,the water vapor barrier property of the PLA/OC/ZnOfilm improved by a maximum of 86%compared to the neat PLAfilm without the deterioration of Young’s modulus or the tensile strength.Moreover,thefilm’s self-antibacterial activity against foodborne pathogens,including gram-negative(Escherichia coli,E.coli)and gram-positive(Staphylococcus aureus,S.aureus)bacteria,was enhanced by a max-imum of approximately 98–99%compared to the neat PLAfilm.Furthermore,SEM images revealed the homo-geneous dispersion of both nano-fillers in the PLA matrix.However,the thermal stability of thefilm decreased slightly after the addition of the OC and ZnO.Thefilm exhibited notable light barrier properties in the UV-Vis range.Moreover,the incorporation of a suitable biodegradable plasticizer significantly decreased the Tg and notably enhanced theflexibility of the nanocompositefilm by increasing the elongation at break approxi-mately 1.5-fold compared to that of the neat PLAfilm.This contributes to its feasibility as an active food packa-ging material.
基金supported by Central Public-Interest Scientific Institution Basal Research Fund,CAFS(2023TD74,2023TD78)the Earmarked Fund for CARS-47(CARS-47)+2 种基金Guangdong Provincial Science and Technology Plan Project(2023B0202010015)Central Public-Interest Scientific Institution Basal Research Fund,CAFS(Sanya Yazhou Bay Science and Technology City(SKJC-2020-02-013))Special Funds for Promoting Economic Development in Guangdong Province(For Modern Fishery)(YueNong 2019B14).
文摘Here,we aimed to study the changes in proteome of golden pompano fillets during post-mortem storage.Tandem mass tags(TMT)-labeled quantitative proteomic strategy was applied to investigate the relationships between protein changes and quality characteristics of modified atmosphere packaging(MAP)fillets during superchilling(-3°C)storage.Scanning electron microscopy was used to show that the muscle histology microstructure of fillets was damaged to varying degrees,and low-field nuclear magnetic resonance was used to find that the immobilized water and free water in the muscle of fillets changed significantly.Total sulfhydryl content,TCA-soluble peptides and Ca2+-ATPase activity also showed that the fillet protein had a deterioration by oxidation and denaturation.The Fresh(FS),MAP,and air packaging(AP)groups were set.Total of 150 proteins were identified as differential abundant proteins(DAPs)in MAP/FS,while 209 DAPs were in AP/FS group.The KEGG pathway analysis indicated that most DAPs were involved in binding proteins and protein turnover.Correlation analysis found that 52 DAPs were correlated with quality traits.Among them,8 highly correlated DAPs are expected to be used as potential quality markers for protein oxidation and water-holding capacity.These results provide a further understanding of the muscle deterioration mechanism of packaging golden pompano fillets during superchilling.
基金Projects of Education and Teaching Reform of the Teaching Steering Committee of Light Industry and Textile Majors in Guangdong Provincial Higher Vocational Colleges(No.2022QGF206)Research Foundation of Shenzhen Polytechnic under Grant 6022312025S.
文摘With the vigorous development of consumer culture in today’s society,various types of food packaging also appear in front of consumers in different forms.There are very big differences in food packaging in terms of shape,color,style and other aspects of information transmission,which have the most direct impact on the audience’s food consumption needs.Driven by the consumption-oriented society,food packaging has shown very obvious comprehensive characteristics,is significantly interdisciplinary,and has close connections with other disciplines.This article will analyze and sort out the impact of food packaging on consumer psychology from different perspectives.
文摘The objective of this study is to improve the mechanical properties and machining performance of high thermal conductivity and low expansion silicon carbide dispersion-strengthened hypereutectic aluminum-silicon electronic packaging materials to meet the needs of aviation,aerospace,and electronic packaging fields.We used the powder metallurgy method and high-temperature hot pressing technology to prepare SiC/Al-Si composite materials with different SiC contents(5vol%,10vol%,15vol%,and 20vol%).The results showed that as the SiC content increased,the tensile strength of the composite material first increased and then decreased.The tensile strength was the highest when the SiC content was 15%;the sintering temperature significantly affected the composite material’s structural density and mechanical properties.Findings indicated 700℃was the optimal sintering and the optimal SiC content of SiC/Al-Si composite materials was between 10%and 15%.Besides,the sintering temperature should be strictly controlled to improve the material’s structural density and mechanical properties.
基金Funded by Key Laboratory of Automobile Materials of Ministry of Education and Department of Materials Science & Engineering,Jilin University
文摘An ultrasonic test of spot welding for stainless steel is conducted. Based on wavelet packet decomposition, the ultrasonic echo signal has been analyzed deeply in time - frequency domain, which can easily distinguish the nugget from the corona bond. The 2D C-scan images produced by ultrasonic C scan which contribute to quantitatively calculate the nugget diameter for the computer are further analyzed. The spot welding nugget diameter can be automatically obtained by image enhancement, edge detection and equivalent diameter algorithm procedure. The ultrasonic detection values in this paper show good agreement with the metallographic measured values. The mean value of normal distribution curve is 0.006 67, and the standard deviation is 0.087 11. Ultrasonic C-scan test based on wavelet packet signal analysis is of high accuracy and stability.
基金This project is supported by Provincial Six Kind Skilled Personnel Project of Jiangsu,China(No.06-E-020).
文摘The finite element method(FEM) is used to analyze the effects of lead widths and pitches on reliability of soldered joints. The optimum simulation for QFP devices is also researched. The results indicate that when the lead pitches are the same, the maximum equivalent stress of the soldered joints increases with the increasing of lead widths, while the reliability of the soldered joints reduces. When the lead widths are the same, the maximum equivalent stress of the soldered joints doesn't decrease completely with the increasing of lead pitches, a minimum value of the maximum equivalent stress values exists in all the curves. Under this condition the maximum equivalent stress of the soldewed joints is relatively the least, the reliability of soldered joints is high and the assembly is excellent. The simulating results indicate the best parameter: The lead width is 0.2 mm and lead pitch is 0.3 mm (the distance between two leads is 0.1 mm), which are benefited for the micromation of QFP devices now. The minimum value of the maximum equivalent stress of soldered joints exists while lead width is 0.25 mm and lead pitch is 0.35 mm (the distance between two leads is 0.1 mm), the devices can serve for a long time and the reliability is the highest, the assembly is excellent. The simulating results also indicate the fact that the lead width is 0.15 mm and lead pitch is 0.2 mm maybe the limit of QFP, which is significant for the high lead count and micromation of assembly.
基金supported by the Knowledge Innovation Project of Chinese Academy of Sciences(Grant No.KGCX2-YW-143)
文摘The physics package of a chip-scale atomic clock (CSAC) has been successfully realized by integrating vertical cavity surface emitting laser (VCSEL), neutral density (ND) filter, λ/4 wave plate, 87Rb vapor cell, photodiode (PD), and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.
文摘The effects of thickness and types of gold plating on the resistance to hightemperature discoloration of gold plating on cavity surface of ceramic package were investigated. Itwas found that the thicker gold plating, the less discoloration degree for ceramic packages.Non-cyanide gold plating performed better resistance to high-temperature aging than cyanide goldplating. The relationship between the gold plating thickness and the amount of diffused Ni to thegold plating of ceramic packages with Au/Ni and Au/Ni-Co platings after heating at 420℃ for 15 minwas also studied. When the gold plating thickness reach 2.0 μm and 1.6 μm for Au/Ni and Au/Ni-Coplating systems, respectively, no discoloration was observed on the gold plating surface of cavity,and the corresponding diffused Ni amounts (mass fraction) are 1.0% and 0.4%, while the diffused Coto the gold plating is 0.04%.
基金supported by the National Key Research and Development Program of China(Grant Nos.2016YFB0401803,2017YFE0131500,2017YFB0405000)National Natural Science Foundation of China(Grant Nos.61834008,61574160,61804164,and 61704184)+1 种基金Natural Science Foundation of Jiangsu province(BK20180254)China Postdoctoral Science Foundation(2018M630619)。
文摘Au80Sn20 alloy is a widely used solder for laser diode packaging.In this paper,the thermal resistance of Ga N-based blue laser diodes packaged in TO56 cans were measured by the forward voltage method.The microstructures of Au80Sn20 solder were then investigated to understand the reason for the difference in thermal resistance.It was found that the microstructure with a higher content of Au-rich phase in the center of the solder and a lower content of(Au,Ni)Sn phase at the interface of the solder/heat sink resulted in lower thermal resistance.This is attributed to the lower thermal resistance of Au-rich phase and higher thermal resistance of(Au,Ni)Sn phase.
基金supported by the Ten Thousand Talent Program and National Natural Science Foundation of China(No.11575282)the Ten Thousand Talent Program and Chinese Academy of Sciences Key Technology Talent Program。
文摘A software package to be used in high-speed oscilloscope-basedthree-dimensionalbunch-by-bunch charge and position measurement is presented.The software package takes the pick-up electrode signal waveform recorded by the high-speed oscilloscope as input,and it calculates and outputs the bunch-by-bunch charge and position.In addition to enabling a three-dimensional observation of the motion of each passing bunch on all beam position monitor pick-up electrodes,it offers many additional features such as injection analysis,bunch response function reconstruction,and turn-by-turn beam analysis.The software package has an easy-to-understand graphical user interface and convenient interactive operation,which has been verified on the Windows 10 system.
文摘<span style="font-family:Verdana;">The subjects of this study were 80 patients who underwent mixed hemorrhoids surgery in our hospital from January to October 2020 (mixed hemorrhoids external and internal ligation, internal hemorrhoids ligation or Xiaozhiling injection) and developed anal edge edema after surgery. According to the order of hospitalization, the patients were randomly divided into treatment group and control group, with 40 cases each.</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">In the control group, blank hot pack was applied on the basis of anorectal No. 1 lotion for prevention and treatment of anal edge edema after operation;in the treatment group, hot pack of Traditional Chinese medicine was applied on the basis of anorectal No. 1 lotion for prevention and treatment of anal edge edema. The course of treatment was 7 days.</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">The edema subsidence and postoperative pain scores were observed in both groups.</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">Results: The scores of anal edema and pain in the treatment group were significantly lower than those in the control group (P < 0.05), and the significant efficiency and total effective rate in the treatment group were significantly better than those in the control group, with statistical difference (P < 0.05).</span><span style="font-size:10.0pt;font-family:;" "=""> </span><span style="font-size:10pt;font-family:Verdana;" "="">Conclusion: Chinese medicine hot election package is effective in treating postoperative anal edema of mixed hemorrhoids, and the method is simple and suitable for clinical promotion.</span>