Microfluidic assisted 90%loading CL-20 spherical particles:Enhancing self-sustaining combustion performance

The performance of the chemical fuel determines the altitude,range and longevity of spacecraft in air and space exploration.Promising alternatives(e.g.,hypergolic ionic liquids or high-energy composites)with high-energy density,heat of formation and fast initial rate are considered as potential chemical fuels.As the high-energy density material,hexanitrohexaazaisowurtzitane(CL-20)often serves as secondary explosive with poor self-propagating combustion behaviors.Herein,90%loading CL-20 microspheres with uniform particle sizes are precisely prepared by microfluid method,which exhibit unique hierarchical structure.The morphology,thermal behaviors,as well as combustion performance were further investigated.The results demonstrated that as-prepared spherical particles exhibit prominent thermal compatibility,and the enhanced self-sustaining combustion performance.This work provides an efficient method achieving the uniform high-energy density particles with excellent self-sustaining combustion performance.

Projecting Wintertime Newly Formed Arctic Sea Ice through Weighting CMIP6 Model Performance and Independence

Precipitous Arctic sea-ice decline and the corresponding increase in Arctic open-water areas in summer months give more space for sea-ice growth in the subsequent cold seasons. Compared to the decline of the entire Arctic multiyear sea ice,changes in newly formed sea ice indicate more thermodynamic and dynamic information on Arctic atmosphere–ocean–ice interaction and northern mid–high latitude atmospheric teleconnections. Here, we use a large multimodel ensemble from phase 6 of the Coupled Model Intercomparison Project(CMIP6) to investigate future changes in wintertime newly formed Arctic sea ice. The commonly used model-democracy approach that gives equal weight to each model essentially assumes that all models are independent and equally plausible, which contradicts with the fact that there are large interdependencies in the ensemble and discrepancies in models' performances in reproducing observations. Therefore, instead of using the arithmetic mean of well-performing models or all available models for projections like in previous studies, we employ a newly developed model weighting scheme that weights all models in the ensemble with consideration of their performance and independence to provide more reliable projections. Model democracy leads to evident bias and large intermodel spread in CMIP6 projections of newly formed Arctic sea ice. However, we show that both the bias and the intermodel spread can be effectively reduced by the weighting scheme. Projections from the weighted models indicate that wintertime newly formed Arctic sea ice is likely to increase dramatically until the middle of this century regardless of the emissions scenario.Thereafter, it may decrease(or remain stable) if the Arctic warming crosses a threshold(or is extensively constrained).

Cosmology-Independent Photon Mass Limits from Localized Fast Radio Bursts by Using Artificial Neural Networks

A hypothetical photon mass m_(γ) can produce a frequency-dependent vacuum dispersion of light, which leads to an additional time delay between photons with different frequencies when they propagate through a fixed distance. The dispersion measure and redshift measurements of fast radio bursts(FRBs) have been widely used to constrain the rest mass of the photon. However, all current studies analyzed the effect of the frequency-dependent dispersion for massive photons in the standard ΛCDM cosmological context. In order to alleviate the circularity problem induced by the presumption of a specific cosmological model based on the fundamental postulate of the masslessness of photons, here we employ a new model-independent smoothing technique, artificial neural network(ANN), to reconstruct the Hubble parameter H(z) function from 34 cosmic-chronometer measurements.By combining observations of 32 well-localized FRBs and the H(z) function reconstructed by ANN, we obtain an upper limit of m_(γ) ≤ 3.5 × 10^(-51)kg, or equivalently m_(γ) ≤ 2.0 × 10^(-15)eV/c^(2)(m_(γ) ≤ 6.5 × 10^(-51)kg, or equivalently m_(γ) ≤ 3.6 × 10^(-15)eV/c_(2)) at the 1σ(2σ) confidence level. This is the first cosmology-independent photon mass limit derived from extragalactic sources.

A Constrained Local Neighborhood Approach for Efficient Markov Blanket Discovery in Undirected Independent Graphs

When learning the structure of a Bayesian network,the search space expands significantly as the network size and the number of nodes increase,leading to a noticeable decrease in algorithm efficiency.Traditional constraint-based methods typically rely on the results of conditional independence tests.However,excessive reliance on these test results can lead to a series of problems,including increased computational complexity and inaccurate results,especially when dealing with large-scale networks where performance bottlenecks are particularly evident.To overcome these challenges,we propose a Markov blanket discovery algorithm based on constrained local neighborhoods for constructing undirected independence graphs.This method uses the Markov blanket discovery algorithm to refine the constraints in the initial search space,sets an appropriate constraint radius,thereby reducing the initial computational cost of the algorithm and effectively narrowing the initial solution range.Specifically,the method first determines the local neighborhood space to limit the search range,thereby reducing the number of possible graph structures that need to be considered.This process not only improves the accuracy of the search space constraints but also significantly reduces the number of conditional independence tests.By performing conditional independence tests within the local neighborhood of each node,the method avoids comprehensive tests across the entire network,greatly reducing computational complexity.At the same time,the setting of the constraint radius further improves computational efficiency while ensuring accuracy.Compared to other algorithms,this method can quickly and efficiently construct undirected independence graphs while maintaining high accuracy.Experimental simulation results show that,this method has significant advantages in obtaining the structure of undirected independence graphs,not only maintaining an accuracy of over 96%but also reducing the number of conditional independence tests by at least 50%.This significant performance improvement is due to the effective constraint on the search space and the fine control of computational costs.

Origin of the Dashuigou independent tellurium deposit at Qinghai–Xizang Plateau: constraints from the light stable isotopes C, O, and H

By studying the light isotopic compositions of carbon,oxygen,and hydrogen,combined with previous research results on the ore-forming source of the deposit,the authors try to uncover its metallogenic origin.The δ^(18)O and δ^(13)C isotope signatures of dolomite samples vary between 10.2 and 13.0‰,and between−7.2 and−5.2‰,respectively,implying that the carbon derives from the upper mantle.δD and δ^(18) O of quartz,biotite,and muscovite from diff erent ore veins of the deposit vary between−82 and−59‰,and between 11.6 and 12.4‰,respectively,implying that the metallogenic solutions are mainly magmatic.According to the relevant research results of many isotope geologists,the fractionation degree of hydrogen isotopes increases as the depth to the Earth’s core increases,and the more diff erentiated the hydrogen isotopes are,the lower their values will be.In other words,mantle-derived solutions can have extremely low hydrogen isotope values.This means that the δD‰ value−134 of the pyrrhotite sample numbered SD-34 in this article may indicate mantle-derived oreforming fl uid of the deposit.The formation of the Dashuigou tellurium deposit occurred between 91.71 and 80.19 Ma.

Are cities greener because of innovation?Independent innovation policy and green economic efficiency

The national independent innovation demonstration zone(NIIDZ)is an independent innovation policy that plays a crucial role in implementing strategies.Given the importance of the NIIDZ,this study uses panel data of 278 prefecture-level cities in China from 2006 to 2020 and empirically examines the effect and internal mechanism of the NIIDZ on green economic efficiency(GEE)using the difference-in-difference model(DID).The results show that the NIIDZ effectively enhances the growth of GEE,and the results remain valid through several robustness tests,such as year-by-year propensity score matching.The transmission mechanism suggests that the NIIDZ indirectly drives GEE by accelerating scientific and technological investment,promoting talent concentration,and optimizing the industrial structure.Moreover,heterogeneity analysis reveals that the promotion effect of the NIIDZ on GEE is more prominent in the eastern region and high green development level areas.The study’s findings can serve as a reference for China to further utilize the policy effectiveness of the NIIDZ and accelerate the high-quality development of the green economy in the future.

The Path to Growth and Maturity for Young Students: Embracing Independence and Self- Reliance

Young students are the future of our country and the hope of our nation.The healthy growth of young students must rely on independence and self-reliance.From the perspectives of family,society,and school,this article explores the cultivation of young students’spirit of independence and self-reliance,which should be grasped from three aspects:recognizing the situation,identifying the reasons,and taking effective measures.

Study on Independent Supervision Function of Design Assurance System

The effective operation of a design assurance system cannot be achieved without the effective performance of the independent supervision function.As one of the core functions of the design assurance system,the purpose of the independent supervision function is to ensure that the system operates within the scope of procedures and manuals.At present,the function of independent supervision is a difficult and confusing issue for various original equipment manufacturers as well as suppliers,and there is an urgent requirement to put forward relevant requirements and form relevant methods.Based on the above mentioned objective,the basic requirements of the independent supervision function of design assurance system were studied,the problems and deficiencies in the organization,staffing,and methods existing in the current independent supervision function were analyzed,the improvement suggestions and measures for the performance of the independent supervision function from the aspects of the organization,staffing,procedures,and suppliers were put forward.The present work and conclusions provide guidance and direction for the effective operation of the design assurance system.

Analysis of the Role of Problem-Based Independent Learning Model in Teaching Cerebral Ischemic Stroke First Aid in Emergency Medicine

Objective:To analyze the effect of using a problem-based(PBL)independent learning model in teaching cerebral ischemic stroke(CIS)first aid in emergency medicine.Methods:90 interns in the emergency department of our hospital from May 2022 to May 2023 were selected for the study.They were divided into Group A(45,conventional teaching method)and Group B(45 cases,PBL independent learning model)by randomized numerical table method to compare the effects of the two groups.Results:The teaching effect indicators and student satisfaction scores in Group B were higher than those in Group A(P<0.05).Conclusion:The use of the PBL independent learning model in the teaching of CIS first aid can significantly improve the teaching effect and student satisfaction.

Frequency selective surface with better polarization independency for arbitrary incident angle

This paper investigates the frequency-selective property of a planar layer consisting of period arrays both theoretically and experimentally for different polarizations at arbitrary incident angle. The novel element is designed by loading the rectangular microstrip element with L-shaped conducting patch at its two ends. Based on the spectral-domain method, the frequency response including angle effect and polarization effect of the frequency selective surface （FSS） structure are analysed and the plots of the frequency versus transmission coefficient are obtained. As a result of the numerical analysis, it is shown that if the source polarization is changed, polarization-independence of previous FSS design can be achieved only for normal incidence, which limits most FSS applications. But in our proposed structure, the better polarization-independency for arbitrary incident angle can be achieved. It is observed that the simulated result comes very close to the experimental result.

Impact of exterior electron emission on the self-sustaining margin of hollow cathode discharge

Hollow cathode researches used to focus on the inner cavity or downstream plume,however,rarely on the gap between the throttling orifice plate and the keeper plate(T-K gap),which was found to impact the self-sustaining margin of hollow cathode discharge in this paper.Near the lower margin,the main power deposition and electron emission and ionization regions would migrate from inner cavity and downstream plume to the T-K gap,in which case,the source and destination of each m A current therein matter for the self-sustaining capability.Changing the metal surfaces in the T-K gap with emissive materials proved effective in lowering the lower margin by supplementing auxiliary thermionic emission,compensating electron loss on cold absorbing walls and suppressing discharge oscillations.By doing so,the lower margin of a 4 A hollow cathode was lowered from 1 to 0.1-0.2 A,enabling it to couple with low power Hall thruster without extra keeper current.

Low energy consumption depth control method of self-sustaining intelligent buoy

Aiming at the contradiction between the depth control accuracy and the energy consumption of the self-sustaining intelligent buoy,a low energy consumption depth control method based on historical array for real-time geostrophic oceanography(Argo)data is proposed.As known from the buoy kinematic model,the volume of the external oil sac only depends on the density and temperature of seawater at hovering depth.Hence,we use historical Argo data to extract the fitting curves of density and temperature,and obtain the relationship between the hovering depth and the volume of the external oil sac.Genetic algorithm is used to carry out the optimal energy consumption motion planning for the depth control process,and the specific motion strategy of depth control process is obtained.Compared with dual closed-loop fuzzy PID control method and radial basis function(RBF)-PID method,the proposed method reduces energy consumption to 1/50 with the same accuracy.Finally,a hardware-in-the-loop simulation system was used to verify this method.When the error caused by fitting curves is not considered,the average error is 2.62 m,the energy consumption is 3.214×10^(4)J,and the error of energy consumption is only 0.65%.It shows the effectiveness and reliability of the method as well as the advantages of comprehensively considering the accuracy and energy consumption.

Supersonic boundary layer transition induced by self-sustaining dual jets

To promote high-speed boundary layer transition,this paper proposes an active self-sustaining dual jets(SDJ)actuator utilizing the energy of supersonic mainflow.Employing the nanoparticle-based planar laser scattering(NPLS),supersonic flat-plate boundary layer transition induced by SDJ is experimentally investigated in an Ma-2.95 low-turbulence wind tunnel.Streamwise and spanwise NPLS images are obtained to analyze fine flow structures of the whole transition process.The results reveal the transition control mechanisms that on the one hand,the jet-induced shear layer produces unstable Kelvin–Helmholtz instabilities in the wake flow,on the other hand,the jets also generates an adverse pressure gradient in the boundary layer and induce unstable streak structures,which gradually break down into turbulence downstream.The paper provides a new method for transition control of high-speed boundary layer,and have prospect both in theory and engineering application.

MPC-based Torque Distribution for Planar Motion of Four-wheel Independently Driven Electric Vehicles:Considering Motor Models and Iron Losses

The most critical obstacle for four-wheel independently driven electric vehicles(4WID-EVs)is the driving range.Being the actuators of 4WID-EVs,motors account for its major power consumption.In this sense,by properly distributing torques to minimize the power consumption,the driving range of 4WID-EV can be effectively improved.This paper proposes a model predictive control(MPC)-based torque distribution scheme,which minimizes the power consumption of 4WID-EVs while guaranteeing its tracking performance of planar motions.By incorporating the motor model considering iron losses,the optimal torque distribution can be achieved without an additional torque controller.Also,for this reason,the proposed control scheme is computationally efficient,since the power consumption term to be optimized,which is expressed as the product of the motor voltages and currents,is much simpler than that derived from the efficiency map.With reasonable simplification and linearization,the MPC problem is converted to a quadratic programming problem,which can be solved efficiently.The simulation results in MATLAB and CarSim co-simulation environments demonstrate that the proposed scheme effectively reduces power consumption with guaranteed tracking performance.

Solving the k-Independent Sets Problem of Graphs by Gröbner Bases

The aim of this paper is to given an algebraic computational method for finding maximal independent sets as well as the independent number of an arbitrary finite graph of n vertices G by strengthening the problem of finding maximal independent sets of G to the problem of finding k-independent sets in G for. It is shown that the existence of k-independent sets in G is equivalent to the existence of solutions of a system of multivariate polynomial equations. It follows that the problem of finding k-independent sets can be realized by using Gröbner bases of polynomial ideals. Since the number of k-independent sets is finite, the triangular equations composed by Gröbner bases are easier to be solved. Consequently, the maximal independent sets and the independent number of G are obtained after solving at most n such equations. Finally, the numerical example is presented to illustrate the effectiveness of this algebraic computational method.

Functional magnetic resonance imaging study of group independent components underpinning item responses to paranoid-depressive scale

BACKGROUND Our study expand upon a large body of evidence in the field of neuropsychiatric imaging with cognitive,affective and behavioral tasks,adapted for the functional magnetic resonance imaging(MRI)(fMRI)experimental environment.There is sufficient evidence that common networks underpin activations in task-based fMRI across different mental disorders.AIM To investigate whether there exist specific neural circuits which underpin differ-ential item responses to depressive,paranoid and neutral items(DN)in patients respectively with schizophrenia(SCZ)and major depressive disorder(MDD).METHODS 60 patients were recruited with SCZ and MDD.All patients have been scanned on 3T magnetic resonance tomography platform with functional MRI paradigm,comprised of block design,including blocks with items from diagnostic paranoid(DP),depression specific(DS)and DN from general interest scale.We performed a two-sample t-test between the two groups-SCZ patients and depressive patients.Our purpose was to observe different brain networks which were activated during a specific condition of the task,respectively DS,DP,DN.RESULTS Several significant results are demonstrated in the comparison between SCZ and depressive groups while performing this task.We identified one component that is task-related and independent of condition(shared between all three conditions),composed by regions within the temporal(right superior and middle temporal gyri),frontal(left middle and inferior frontal gyri)and limbic/salience system(right anterior insula).Another com-ponent is related to both diagnostic specific conditions(DS and DP)e.g.It is shared between DEP and SCZ,and includes frontal motor/language and parietal areas.One specific component is modulated preferentially by to the DP condition,and is related mainly to prefrontal regions,whereas other two components are significantly modulated with the DS condition and include clusters within the default mode network such as posterior cingulate and precuneus,several occipital areas,including lingual and fusiform gyrus,as well as parahippocampal gyrus.Finally,component 12 appeared to be unique for the neutral condition.In addition,there have been determined circuits across components,which are either common,or distinct in the preferential processing of the sub-scales of the task.CONCLUSION This study has delivers further evidence in support of the model of trans-disciplinary cross-validation in psychiatry.

Free Vibration Analysis of Rectangular Plate with Cutouts under Elastic Boundary Conditions in Independent Coordinate Coupling Method

Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.

海外电力建设项目Independent Engineer工作模式探讨

在一些海外电力建设项目中,Independent Engineer是不可或缺的。Independent Engineer的角色不同于国内电力建设五方中的任何一方。本文以巴基斯坦某燃煤电站为例,探讨Independent Engineer的工作模式,并将Independent Engineer与国内电力建设参建方进行对比分析。

Tianmen textile machinery:Independently developed the drawing frame equipment

Hubei Tianmen Textile Machinery Co.,Ltd.is a well-known enterprise and key high-tech enterprise in China textile industry.The company's leading product,drawing frame,has completely independent intellectual property rights,among which TM 11 is well received by users and has a high market share in China.

中国教育学自主建构的广义认识论条件

中国教育学的自主建构不只是教育学学科发展不可回避的问题,也是中国社会进一步发展的必然需求,在某种意义上,也是全球化时代更好地服务于国家教育发展的理性选择。然而,中国教育学的自主建构以至中国教育学自主性的实现,并不只是一个愿望上的或认识上的问题,还需要做相关的条件上的准备。不过,所谓条件归根到底都是关联着认识活动的,可以称之为广义认识论条件。简而言之,中国教育学的自主建构需要具备三个层面的广义认识论条件:一是教育学学者的精神自立。其操作性的内涵是学者须具有求真至善的学者精神和务实创新的学术精神。二是教育学研究的认识论自觉。研究者不仅须知教育学兼有思想性和科学性,而且须有研究方法论上的理性。三是教育学建构的文化自信。只有这样,中国教育学研究才能够摆脱以往被国外教育学研究带路的局面,进而步入自主发展的阶段。