Resistance analysis is an important analytical method used to evaluate the hydrodynamic performance of High Speed Craft (HSC). Analysis of multihull resistance in shallow water is essential to the performance evaluati...Resistance analysis is an important analytical method used to evaluate the hydrodynamic performance of High Speed Craft (HSC). Analysis of multihull resistance in shallow water is essential to the performance evaluation of any type of HSC. Ships operating in shallow water experience increases in resistance because of changes in pressure distribution and wave pattern. In this paper, the shallow water performance of an HSC design concept, the semi-Small Waterplane Area Twin Hull (semi-SWATH) form, is studied. The hull is installed with fin stabilizers to reduce dynamic motion effects, and the resistance components of the hull, hull trim condition, and maximum wave amplitude around the hull are determined via calm water resistance tests in shallow water. These criteria are important in analyzing semi-SWATH resistance in shallow water and its relation to flow around hull. The fore fin angle is fixed to zero degrees, while the aft fin angle is varied to 0o, 5o, 10o, and 15o. For each configuration, investigations are conducted with depth Froude numbers (FrH) ranging from 0.65 to 1.2, and the resistance tests are performed in shallow water at the towing tank of UTM. Analysis results indicate that the resistance, wave pattern, and trim of the semi-SWATH hull form are affected by the fin angle. The resistance is amplified whereas the trim and sinkage are reduced as the fin angle increases. Increases in fin angle contribute to seakeeping and stability but affect the hull resistance of HSCs.展开更多
A small waterplane area twin hull(SWATH)has excellent seakeeping performance and low wave-making resistance,and it has been applied to small working craft,pleasure boats,and unmanned surface vehicles.However,with the ...A small waterplane area twin hull(SWATH)has excellent seakeeping performance and low wave-making resistance,and it has been applied to small working craft,pleasure boats,and unmanned surface vehicles.However,with the increase in speed,the hydrodynamic resistance of SWATH will increase exponentially because of its large wet surface,followed by the uncomfortable situation of the hull underwater part relative to the water level and in terms of high trim by stern and high sinkage.A way to improve this situation is to reduce the depth of the draft at high speeds to ensure that all or a part of the volume of the submerged bodies is above the water level.Based on this idea,a new type of semi-SWATH hull form was analyzed in this paper.The two submerged bodies of the SWATH have a catamaran boat shape.This paper employed Sie-mens PLM Star-CCM+to study the hydrodynamic performance of an advanced semi-SWATH model.Bare-hull resistance was estimated for both SWATH and CAT(CATAMARAN)modes in calm water.Moreover,the efect of fxed stabilizing fns with diferent angles on the vertical motions of the vessel in regular head waves was investigated with an overset mesh approach.The vertical motion responses were estimated at diferent wave encounter frequencies,and the present numerical method results have been verifed by already published experimental data.展开更多
The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover con...The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover configuration resulting from the merging of two classical shapes： a conventional SWATH and a fast catamaran. The final hull design exhibits a wedge-like waterline shape with the maximum beam at the stem; the hull ends with a very narrow entrance angle, has a prominent bulbous bow typical of SWATH vessels, and features full stern to arrange waterjet propellers. Our analysis aims to perform a preliminary assessment of the hydrodynamic performance of a hull with such a complex shape both in terms of resistance of the hull in calm water and seakeeping capability in regular head waves and compare the performance with that of a conventional SWATH. The analysis is performed using a boundary element method that was preliminarily validated on a conventional SWATH vessel.展开更多
文摘Resistance analysis is an important analytical method used to evaluate the hydrodynamic performance of High Speed Craft (HSC). Analysis of multihull resistance in shallow water is essential to the performance evaluation of any type of HSC. Ships operating in shallow water experience increases in resistance because of changes in pressure distribution and wave pattern. In this paper, the shallow water performance of an HSC design concept, the semi-Small Waterplane Area Twin Hull (semi-SWATH) form, is studied. The hull is installed with fin stabilizers to reduce dynamic motion effects, and the resistance components of the hull, hull trim condition, and maximum wave amplitude around the hull are determined via calm water resistance tests in shallow water. These criteria are important in analyzing semi-SWATH resistance in shallow water and its relation to flow around hull. The fore fin angle is fixed to zero degrees, while the aft fin angle is varied to 0o, 5o, 10o, and 15o. For each configuration, investigations are conducted with depth Froude numbers (FrH) ranging from 0.65 to 1.2, and the resistance tests are performed in shallow water at the towing tank of UTM. Analysis results indicate that the resistance, wave pattern, and trim of the semi-SWATH hull form are affected by the fin angle. The resistance is amplified whereas the trim and sinkage are reduced as the fin angle increases. Increases in fin angle contribute to seakeeping and stability but affect the hull resistance of HSCs.
文摘A small waterplane area twin hull(SWATH)has excellent seakeeping performance and low wave-making resistance,and it has been applied to small working craft,pleasure boats,and unmanned surface vehicles.However,with the increase in speed,the hydrodynamic resistance of SWATH will increase exponentially because of its large wet surface,followed by the uncomfortable situation of the hull underwater part relative to the water level and in terms of high trim by stern and high sinkage.A way to improve this situation is to reduce the depth of the draft at high speeds to ensure that all or a part of the volume of the submerged bodies is above the water level.Based on this idea,a new type of semi-SWATH hull form was analyzed in this paper.The two submerged bodies of the SWATH have a catamaran boat shape.This paper employed Sie-mens PLM Star-CCM+to study the hydrodynamic performance of an advanced semi-SWATH model.Bare-hull resistance was estimated for both SWATH and CAT(CATAMARAN)modes in calm water.Moreover,the efect of fxed stabilizing fns with diferent angles on the vertical motions of the vessel in regular head waves was investigated with an overset mesh approach.The vertical motion responses were estimated at diferent wave encounter frequencies,and the present numerical method results have been verifed by already published experimental data.
文摘The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover configuration resulting from the merging of two classical shapes： a conventional SWATH and a fast catamaran. The final hull design exhibits a wedge-like waterline shape with the maximum beam at the stem; the hull ends with a very narrow entrance angle, has a prominent bulbous bow typical of SWATH vessels, and features full stern to arrange waterjet propellers. Our analysis aims to perform a preliminary assessment of the hydrodynamic performance of a hull with such a complex shape both in terms of resistance of the hull in calm water and seakeeping capability in regular head waves and compare the performance with that of a conventional SWATH. The analysis is performed using a boundary element method that was preliminarily validated on a conventional SWATH vessel.
